Image not available
Illustrative purposes only
RCLAMP0508M.TBT
TVS Diode, 5 V, 25 V, MSOP, 10 Pins
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: SEMTECH
- Product type: TVS Diodes
- Product Range:-; TVS Polarity:-; Reverse Stand-Off Voltage Vrwm:5V; Clamping Voltage Vc Max:25V; Diode Case Style:MSOP; No. of Pins:10Pins; Breakdown Voltage Min:-; Breakdown Voltage Max:6V; Peak Pulse Po
- SVHC: No SVHC (15-Jun-2015)
- No. of Pins: 10Pins
- TVS Polarity: -
- Product Range: -
- Qualification: -
- Diode Mounting: Surface Mount
- Diode Case Style: MSOP
- Clamping Voltage Max: 25V
- Reverse Standoff Voltage: 5V
- Maximum Breakdown Voltage: 6V
- Minimum Breakdown Voltage: -
- Operating Temperature Max: 125°C
- Peak Pulse Power Dissipation: 300W
| Delivery and price | |
|---|---|
| Units per pack | 1000 |
| Price | 0.921 € |
| Current stock | 500+ |
| Lead time | 30 days |
Datasheet
## RClamp0508M RailClamp **[]** Low Capacitance TVS Diode Array ## PROTECTION PRODUCTS - RailClamp ## Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. The RClamp series has been specifically designed to protect sensitive components which are connected to data and transmission lines from overvoltage caused by ESD (electrostatic discharge), CDE (cable discharge events), EFT (electrical fast transients), and lightning. The unique design of these devices incorporates surge rated, low capacitance steering diodes and a TVS diode in a single package. During transient conditions, the steering diodes direct the transient to either the positive side of the power supply line or to ground. The internal TVS diode prevents over-voltage on the power line, protecting any downstream components. The RClamp[TM] 0508M has a low typical capacitance of 3pF and may be used on lines operating up to 1GHz. This makes the device ideal for protection of highspeed data lines such as USB 2.0, Firewire, DVI, and gigabit Ethernet interfaces. The low capacitance array configuration allows the user to protect eight high-speed data or transmission lines. The low inductance construction minimizes voltage overshoot during high current surges. They may be used to meet the ESD immunity requirements of IEC 61000-4-2, Level 4 (15kV air, 8kV contact discharge). ## Features - ESD protection for high-speed data lines to IEC 61000-4-2 (ESD) 15kV (air), 8kV (contact) IEC 61000-4-4 (EFT) 40A (5/50ns) IEC 61000-4-5 (Lightning) 12A (8/20µs) - Array of surge rated diodes with internal TVS - Small package saves board space - Protects eight I/O lines operating up to **1GHz** - Low capacitance: 3pF typical - Low clamping voltage - Low operating voltage: 5.0V - Solid-state silicon-avalanche technology ## Mechanical Characteristics - JEDEC MSOP-10L package - Molding compound flammability rating: UL 94V-0 - Marking : Marking code and date code - Packaging : Tape and Reel per EIA 481 - Lead Finish: Matte Tin ## Applications - USB 2.0 Power & Data Line Protection - Video Graphics Cards - Monitors and Flat Panel Displays - Digital Video Interface (DVI) - High Definition Multi-Media Interface (HDMI) - 10/100/1000 Ethernet - ATM Interfaces - IEEE 1394 Firewire Ports ## Circuit Diagram **==> picture [265 x 209] intentionally omitted <==** **----- Start of picture text -----**<br> 3<br>1 2 4 5 7 8 9 10<br>6<br>**----- End of picture text -----**<br> ## PIN Configuration **==> picture [243 x 111] intentionally omitted <==** **----- Start of picture text -----**<br> Line 1 1 Line 8<br>Line 2 Line 7<br>Vcc Line 6<br>Line 3 Line 5<br>Line 4 GND<br>**----- End of picture text -----**<br> **==> picture [106 x 10] intentionally omitted <==** **----- Start of picture text -----**<br> MSOP-10L (Top View)<br>**----- End of picture text -----**<br> www.semtech.com Revision 01/18/2008 1 RClamp0508M ## PROTECTION PRODUCTS Absolute Maximum Rating |PROTECTION PRODUCTS<br>Absolute Maximum Rating|||| |---|---|---|---| |g<br>nit<br>a<br>R|l<br>o<br>b<br>m<br>y<br>S|e<br>ul<br>a<br>V|s<br>ti<br>n<br>U| |)s<br>µ<br>0<br>2<br>/<br>8<br>=<br>p<br>t(<br>r<br>e<br>w<br>o<br>P<br>e<br>slu<br>P<br>k<br>a<br>e<br>P|P k<br>p|0<br>0<br>3|stt<br>a<br>W| |)s<br>µ<br>0<br>2<br>/<br>8<br>=<br>p<br>t(<br>t<br>n<br>e<br>rr<br>u<br>C<br>e<br>slu<br>P<br>k<br>a<br>e<br>P|I P<br>P|2<br>1|A| |)riA<br>(<br>2<br>-<br>4<br>-<br>0<br>0<br>0<br>1<br>6<br>C<br>EI<br>r<br>e<br>p<br>D<br>S<br>E<br>)tc<br>a<br>t<br>n<br>o<br>C<br>(<br>2<br>-<br>4<br>-<br>0<br>0<br>0<br>1<br>6<br>C<br>EI<br>r<br>e<br>p<br>D<br>S<br>E|V<br>D<br>S<br>E|5<br>1<br>8|V<br>k| |e<br>r<br>u<br>t<br>a<br>r<br>e<br>p<br>m<br>e<br>T<br>g<br>nir<br>e<br>dlo<br>S<br>d<br>a<br>e<br>L|TL|).c<br>e<br>s<br>0<br>1<br>(<br>0<br>6<br>2|C<br>°| |e<br>r<br>u<br>t<br>a<br>r<br>e<br>p<br>m<br>e<br>T<br>g<br>nit<br>a<br>r<br>e<br>p<br>O|TJ|5<br>2<br>1<br>+<br>o<br>t<br>5<br>5<br>-|C<br>°| |e<br>r<br>u<br>t<br>a<br>r<br>e<br>p<br>m<br>e<br>T<br>e<br>g<br>a<br>r<br>o<br>t<br>S|T<br>G<br>T<br>S|0<br>5<br>1<br>+<br>o<br>t<br>5<br>5<br>-|C<br>°| ## Electrical Characteristics (T=25[o] C) ||||||||| |---|---|---|---|---|---|---|---| |r<br>e<br>t<br>e<br>m<br>a<br>r<br>a<br>P|l<br>o<br>b<br>m<br>y<br>S||s<br>n<br>oiti<br>d<br>n<br>o<br>C|m<br>u<br>m<br>i<br>n<br>i<br>M|l<br>a<br>ci<br>p<br>y<br>T|m<br>u<br>m<br>ix<br>a<br>M|s<br>ti<br>n<br>U| |e<br>g<br>a<br>tlo<br>V<br>ff<br>O<br>-<br>d<br>n<br>a<br>t<br>S<br>e<br>sr<br>e<br>v<br>e<br>R|V<br>M<br>W<br>R||6<br>o<br>t<br>3<br>niP|||5|V| |e<br>g<br>a<br>tlo<br>V<br>n<br>w<br>o<br>d<br>k<br>a<br>e<br>r<br>B<br>e<br>sr<br>e<br>v<br>e<br>R|V R<br>B||It<br>A<br>m<br>1<br>=<br>6<br>o<br>t<br>3<br>niP|6|||V| |t<br>n<br>e<br>rr<br>u<br>C<br>e<br>g<br>a<br>k<br>a<br>e<br>L<br>e<br>sr<br>e<br>v<br>e<br>R|IR||V<br>M<br>W<br>R<br>C<br>°<br>5<br>2<br>=<br>T<br>,V<br>5<br>=<br>6<br>o<br>t<br>3<br>niP|||5|A<br>µ| |e<br>g<br>a<br>tlo<br>V<br>d<br>r<br>a<br>w<br>r<br>o<br>F|Vf||If<br>A<br>m<br>5<br>1<br>=|||2<br>.<br>1|V| |e<br>g<br>a<br>tlo<br>V<br>g<br>nip<br>m<br>alC|VC||I P<br>P<br>s<br>µ<br>0<br>2<br>/<br>8<br>=<br>p<br>t<br>,<br>A<br>1<br>=<br>d<br>n<br>u<br>o<br>r<br>G<br>o<br>t<br>nip<br>O<br>/I<br>y<br>n<br>A|||5<br>.<br>2<br>1|V| |e<br>g<br>a<br>tlo<br>V<br>g<br>nip<br>m<br>alC|VC||I P<br>P<br>s<br>µ<br>0<br>2<br>/<br>8<br>=<br>p<br>t<br>,<br>A<br>5<br>=<br>d<br>n<br>u<br>o<br>r<br>G<br>o<br>t<br>nip<br>O<br>/I<br>y<br>n<br>A|||5<br>.7<br>1|V| |e<br>g<br>a<br>tlo<br>V<br>g<br>nip<br>m<br>alC|VC||I P<br>P<br>s<br>µ<br>0<br>2<br>/<br>8<br>=<br>p<br>t<br>,<br>A<br>2<br>1<br>=<br>d<br>n<br>u<br>o<br>r<br>G<br>o<br>t<br>nip<br>O<br>/I<br>y<br>n<br>A|||5<br>2|V| |e<br>c<br>n<br>a<br>tic<br>a<br>p<br>a<br>C<br>n<br>oitc<br>n<br>u<br>J|Cj||VR<br>z<br>H<br>M<br>1<br>=<br>f<br>,V<br>0<br>=<br>d<br>n<br>u<br>o<br>r<br>G<br>o<br>t<br>nip<br>O<br>/I<br>y<br>n<br>A||3|5|F<br>p| ||||VR<br>z<br>H<br>M<br>1<br>=<br>f<br>,V<br>0<br>=<br>s<br>nip<br>O<br>/I<br>n<br>e<br>e<br>w<br>t<br>e<br>B||5<br>.<br>1||F<br>p| www.semtech.com 2008 Semtech Corp. 2 RClamp0508M ## PROTECTION PRODUCTS ## Typical Characteristics ## Non-Repetitive Peak Pulse Power vs. Pulse Time **==> picture [258 x 171] intentionally omitted <==** **----- Start of picture text -----**<br> 10<br>1<br>0.1<br>0.01<br>0.1 1 10 100 1000<br>Pulse Duration - tp ( µ s)<br> (kW)<br>PP<br>Peak Pulse Power - P<br>**----- End of picture text -----**<br> ## Pulse Waveform **==> picture [259 x 171] intentionally omitted <==** **----- Start of picture text -----**<br> 110<br>Waveform<br>100<br> Parameters:<br>90<br>tr = 8µs<br>80 td = 20µs<br>70<br>e [-t]<br>60<br>50<br>40<br>td = IPP/2<br>30<br>20<br>10<br>0<br>0 5 10 15 20 25 30<br>Time (µs)<br>PP<br>Percent of I<br>**----- End of picture text -----**<br> Forward Voltage vs. Forward Current **==> picture [261 x 170] intentionally omitted <==** **----- Start of picture text -----**<br> 7.00<br>6.00<br>5.00<br>4.00<br>3.00<br>Waveform<br>2.00<br> Parameters:<br>tr = 8 µ s<br>1.00<br>td = 20µs<br>0.00<br>0.00 2.00 4.00 6.00 8.00 10.00 12.00<br>Forward Current - IF (A)<br> (V)F<br>Forward Voltage -V<br>**----- End of picture text -----**<br> ## Power Derating Curve **==> picture [235 x 154] intentionally omitted <==** **----- Start of picture text -----**<br> 110<br>100<br>90<br>80<br>70<br>60<br>50<br>40<br>30<br>20<br>10<br>0<br>0 25 50 75 100 125 150<br>Ambient Temperature - TA ( [o] C)<br>PP<br>% of Rated Power or I<br>**----- End of picture text -----**<br> Clamping Voltage vs. Peak Pulse Current **==> picture [261 x 171] intentionally omitted <==** **----- Start of picture text -----**<br> 30.00<br>25.00<br>20.00<br>15.00<br>10.00 Waveform<br> Parameters:<br>5.00 tr = 8µs<br>td = 20µs<br>0.00<br>0.00 2.00 4.00 6.00 8.00 10.00 12.00<br>Peak Pulse Current - Ipp (A)<br>Clamping Voltage -Vc (V)<br>**----- End of picture text -----**<br> Normalized Capacitance vs. Reverse Voltage **==> picture [256 x 163] intentionally omitted <==** **----- Start of picture text -----**<br> 2<br>1.8<br>1.6<br>1.4<br>1.2<br>1<br>0.8<br>0.6<br>0.4<br>0.2<br>f = 1 MHz<br>0<br>0 1 2 3 4 5<br>Reverse Voltage - VR (V)<br>=0)<br>R<br>(V) / CJ<br>R<br>(VCJ<br>**----- End of picture text -----**<br> www.semtech.com 2008 Semtech Corp. 3 RClamp0508M ## PROTECTION PRODUCTS ## Typical Characteristics (Con’t) ## Insertion Loss S21 **==> picture [260 x 237] intentionally omitted <==** **----- Start of picture text -----**<br> CH1 S21 LOG 3 dB/ REF 0 dB<br>START .030 000 MHz STOP 3 000. 000 000 MHz<br>**----- End of picture text -----**<br> ## Analog Cross Talk **==> picture [224 x 200] intentionally omitted <==** **----- Start of picture text -----**<br> CH1 S21 LOG 20 dB/ REF 0 dB<br>START .030 000 MHz STOP 3 000. 000 000 MHz<br>**----- End of picture text -----**<br> www.semtech.com 4 2008 Semtech Corp. RClamp0508M ## PROTECTION PRODUCTS ## Applications Information ## Device Connection Options for Protection of Eight High-Speed Data Lines This device is designed to protect eight data lines from transient over-voltages by clamping them to a fixed reference. When the voltage on the protected line exceeds the reference voltage (plus diode VF) the steering diodes are forward biased, conducting the transient current away from the sensitive circuitry. Data lines are connected at pins 1, 2, 4, 5, 7, 8, 9, and 10. The negative reference is connected at pin 6. This pin should be connected directly to a ground plane on the board for best results. The path length is kept as short as possible to minimize parasitic inductance. The positive reference is connected at pin 3. The options for connecting the positive reference are as follows: 1. To protect data lines and the power line, connect pin 3 directly to the positive supply rail (VCC). In this configuration the data lines are referenced to the supply voltage. The internal TVS diode prevents over-voltage on the supply rail. 2. In applications where the supply rail does not exit the system, the internal TVS may be used as the reference. In this case, pin 3 is not connected. The steering diodes will begin to conduct when the voltage on the protected line exceeds the working voltage of the TVS (plus one diode drop). ## Schematic **==> picture [254 x 112] intentionally omitted <==** **----- Start of picture text -----**<br> 3<br>1 2 4 5 7 8 9 10<br>6<br>**----- End of picture text -----**<br> ## Pin Configuration **==> picture [243 x 110] intentionally omitted <==** **----- Start of picture text -----**<br> Line 1 1 Line 8<br>Line 2 Line 7<br>Vcc Line 6<br>Line 3 Line 5<br>Line 4 GND<br>**----- End of picture text -----**<br> ## Universal Serial Bus ESD Protection The RClamp0508M may be used to protect USB 2.0 ports on monitors, computers, peripherals or portable systems. Each device will protect up to four USB ports. When the voltage on the data lines exceed the bus voltage (plus one diode drop), the internal rectifiers are forward biased conducting the transient current away from the protected controller chip. The TVS diode directs the surge to ground. The TVS diode also acts to suppress ESD strikes directly on the voltage bus. Thus, both power and data pins are protected with a single device. www.semtech.com 2008 Semtech Corp. 5 RClamp0508M ## PROTECTION PRODUCTS ## Applications Information ## ESD Protection With RailClamps **[]** RailClamps are optimized for ESD protection using the rail-to-rail topology. They are designed to overcome the inherent disadvantages of using discrete signal diodes for ESD suppression. The RailClamp’s integrated TVS diode helps to mitigate the effects of parasitic inductance in the power supply connection. During an ESD event, the current will be directed through the integrated TVS diode to ground. The maximum voltage seen by the protected IC due to this path will be the clamping voltage of the device. The line loading capacitance is minimized by using low capacitance steering diodes. The steering diodes are scaled to handle high current ESD events without damage or degradation. The end result is a highly reliable, integrated solution that eliminates the guess work associated with using discrete components. ## **Rail-To-Rail Protection Using RailClamp TVS Arrays** **==> picture [207 x 101] intentionally omitted <==** ## Matte Tin Lead Finish Matte tin has become the industry standard lead-free replacement for SnPb lead finishes. A matte tin finish is composed of 100% tin solder with large grains. Since the solder volume on the leads is small compared to the solder paste volume that is placed on the land pattern of the PCB, the reflow profile will be determined by the requirements of the solder paste. Therefore, these devices are compatible with both lead-free and SnPb assembly techniques. In addition, unlike other lead-free compositions, matte tin does not have any added alloys that can cause degradation of the solder joint. www.semtech.com 2008 Semtech Corp. 6 RClamp0508M ## PROTECTION PRODUCTS ## Applications Information - SPICE Model **==> picture [279 x 179] intentionally omitted <==** **----- Start of picture text -----**<br> 1.0 nH<br>I/O Line<br>nH<br>**----- End of picture text -----**<br> RClamp0508M Spice Model |s<br>r<br>e<br>t<br>e<br>m<br>a<br>r<br>a<br>P<br>e<br>ci<br>p<br>S<br>M<br>8<br>0<br>5<br>0<br>p<br>m<br>al<br>C<br>R|s<br>r<br>e<br>t<br>e<br>m<br>a<br>r<br>a<br>P<br>e<br>ci<br>p<br>S<br>M<br>8<br>0<br>5<br>0<br>p<br>m<br>al<br>C<br>R|s<br>r<br>e<br>t<br>e<br>m<br>a<br>r<br>a<br>P<br>e<br>ci<br>p<br>S<br>M<br>8<br>0<br>5<br>0<br>p<br>m<br>al<br>C<br>R|s<br>r<br>e<br>t<br>e<br>m<br>a<br>r<br>a<br>P<br>e<br>ci<br>p<br>S<br>M<br>8<br>0<br>5<br>0<br>p<br>m<br>al<br>C<br>R|s<br>r<br>e<br>t<br>e<br>m<br>a<br>r<br>a<br>P<br>e<br>ci<br>p<br>S<br>M<br>8<br>0<br>5<br>0<br>p<br>m<br>al<br>C<br>R| |---|---|---|---|---| |r<br>e<br>t<br>e<br>m<br>a<br>r<br>a<br>P|ti<br>n<br>U|)<br>D<br>R<br>C<br>L<br>(<br>1<br>D|)<br>D<br>R<br>C<br>L<br>(<br>2<br>D|)<br>S<br>V<br>T<br>(<br>3<br>D| |S<br>I|p<br>m<br>A|4<br>1<br>-<br>E<br>0<br>1|4<br>1<br>-<br>E<br>0<br>1|4<br>1<br>-<br>E<br>0<br>1| |V<br>B|tlo<br>V|0<br>8<br>1|0<br>2|9<br>5<br>.<br>8| |J<br>V|tlo<br>V|2<br>6<br>.<br>0|9<br>5<br>.<br>0|6<br>.<br>0| |S<br>R|m<br>h<br>O|1<br>3<br>.<br>0|7<br>3<br>.<br>0|0<br>0<br>5<br>.<br>0| |V<br>B<br>I|p<br>m<br>A|3<br>-<br>E<br>1|3<br>-<br>E<br>1|3<br>-<br>E<br>1| |O<br>J<br>C|d<br>a<br>r<br>a<br>F|2<br>1<br>-<br>E<br>3|2<br>1<br>-<br>E<br>1|2<br>1<br>-<br>E<br>0<br>6<br>3| |T<br>T|c<br>e<br>s|9<br>-<br>E<br>1<br>4<br>5<br>.<br>2|9<br>-<br>E<br>1<br>4<br>5<br>.<br>2|9<br>-<br>E<br>1<br>4<br>5<br>.<br>2| |M|--|1<br>0<br>.<br>0|1<br>0<br>.<br>0|4<br>3<br>3<br>.<br>0| |N|--|1.<br>1|1.<br>1|1.<br>1| |G<br>E|V<br>e|1<br>1.<br>1|1<br>1.<br>1|1<br>1.<br>1| www.semtech.com 2008 Semtech Corp. 7 RClamp0508M ## PROTECTION PRODUCTS ## Outline Drawing - MSOP 10LOutline Drawing - SO-8 **==> picture [477 x 202] intentionally omitted <==** **----- Start of picture text -----**<br> DIMENSIONS<br>e<br>INCHES MILLIMETERS<br>A D DIM MIN NOM MAX MIN NOM MAX<br>A - - .043 - - 1.10<br>N A1 .000 - .006 0.00 - 0.15<br>SEE DETAIL A A2 .030 - .037 0.75 - 0.95<br>2X E/2 SIDE VIEW b .007 - .011 0.17 - 0.27<br>c .003 - .009 0.08 - 0.23<br>E1 E D .114 .118 .122 2.90 3.00 3.10<br>PIN 1 E1 .114 .118 .122 2.90 3.00 3.10<br>INDICATOR H E .193 BSC 4.90 BSC<br>e .020 BSC 0.50 BSC<br>L .016 .024 .032 0.40 0.60 0.80<br>ccc C 1 2 GAGE c L1 (.037) (.95)<br>2X N/2 TIPS B PLANE 01N 0° 10- 8° 0° 10- 8°<br>aaa .004 0.10<br>0.25 L 01 bbb .003 0.08<br>(L1) ccc .010 0.25<br>D<br>aaa C DETAIL A<br>A2 A<br>SEATING<br>PLANE<br>C A1<br>bxN<br>bbb C A-B D<br>**----- End of picture text -----**<br> NOTES: 1. CONTROLLING DIMENSIONS ARE IN MILLIMETERS (ANGLES IN DEGREES). 2. DATUMS AND TO BE DETERMINED AT DATUM PLANE-A-B-H- 3. DIMENSIONS "E1" AND "D" DO NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS. 4. REFERENCE JEDEC STD MO-187, VARIATION BA. ## Land Pattern - MSOP 10L **==> picture [246 x 105] intentionally omitted <==** **----- Start of picture text -----**<br> X<br>DIMENSIONS<br>DIM INCHES MILLIMETERS<br>C (.161) (4.10)<br>(C) G Z G .098 2.50<br>P .020 0.50<br>X .011 0.30<br>Y .063 1.60<br>Y Z .224 5.70<br>P<br>**----- End of picture text -----**<br> NOTES: 1. THIS LAND PATTERN IS FOR REFERENCE PURPOSES ONLY. CONSULT YOUR MANUFACTURING GROUP TO ENSURE YOUR COMPANY'S MANUFACTURING GUIDELINES ARE MET. www.semtech.com 2008 Semtech Corp. 8 RClamp0508M ## PROTECTION PRODUCTS ## Marking Codes ## 508M XXXX - XXXX = Date Code - ** Dot indicates Pin 1 ## Ordering Information |r<br>e<br>b<br>m<br>u<br>N<br>tr<br>a<br>P|g<br>n<br>i<br>k<br>r<br>o<br>W<br>e<br>g<br>a<br>tl<br>o<br>V|r<br>e<br>p<br>y<br>t<br>Q<br>l<br>e<br>e<br>R|e<br>zi<br>S<br>l<br>e<br>e<br>R| |---|---|---|---| |T<br>B<br>T.<br>M<br>8<br>0<br>5<br>0<br>p<br>m<br>alC<br>R|V<br>5|0<br>0<br>5|h<br>c<br>nI<br>7| Note: Lead finish is lead free matte tin RailClamp and RClamp are marks of Semtech Corporation ## Contact Information Semtech Corporation Protection Products Division 200 Flynn Road, Camarillo, CA 93012 Phone: (805)498-2111 FAX (805)498-3804 www.semtech.com 2008 Semtech Corp. 9
Updated at June 1, 2026
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →