RACT18-700

• Triac –dimmable with leading or trailing Features edge dimmers • Class II with SELV output (no earth required) TRIAC Dimmable **AC/DC Converter** • Extra-large screw terminals and integrated cable clamps for easy installation LED • Power factor corrected >0.95 Driver • Dimming range 1..100% **RACT18** • Compatible with a wide range of dimmers _ | DECOM Description **18 Watt** The RACT18-xxx series are low cost, triac-dimmable, constant current 18W LED drivers available with **3** ~~SS~~ either 350mA, 500mA, 700mA, 1.05A or 1.4A full-range outputs. The drivers are Class II (double **TRIAC** ~~=~~ insulated) meaning no earth connection is required. The phase angle dimming works with leading or trailing edge dimmers. The RACT18 is suitable for indoor locations up to 50°C ambient temperature and **Dimmable** is certified for building into furniture for applications such as dimmable shelf lighting, cove lighting or accent lighting. It is CE (LVD + EMC + RoHS) + EAC marked and has the international IEC61347-1 CB **Single Output r** 

Description ~~SS~~ 

The RACT18-xxx series are low cost, triac-dimmable, constant current 18W LED drivers available with either 350mA, 500mA, 700mA, 1.05A or 1.4A full-range outputs. The drivers are Class II (double insulated) meaning no earth connection is required. The phase angle dimming works with leading or trailing edge dimmers. The RACT18 is suitable for indoor locations up to 50°C ambient temperature and is certified for building into furniture for applications such as dimmable shelf lighting, cove lighting or accent lighting. It is CE (LVD + EMC + RoHS) + EAC marked and has the international IEC61347-1 CB report certification. 

|Selection Guide<br>~~0~~|Selection Guide<br>~~0~~|
|---|---|
|Part<br>Input<br>Output<br>Output<br>Efficiency<br>Output||
|Number<br>Voltage Range<br>Voltage Range<br>Current<br>min. @rated load Power<br>[VAC]<br>[VDC]<br>[mA]<br>[%]<br>[W]<br>RACT18-350<br>198-264<br>26-52<br>350<br>85<br>18<br>RACT18-500<br>198-264<br>18-36<br>500<br>84<br>18<br>RACT18-700<br>198-264<br>13-26<br>700<br>85<br>18<br>RACT18-1050<br>198-264<br>9-18<br>1050<br>82<br>18<br>RACT18-1400<br>198-264<br>6.5-13<br>1400<br>82<br>18<br>~~—~~<br>~~a~~||



All LED Drivers may not be used without a load. They must be switched on the primary side only. Noncompliance may damage the LED or reduce its lifetime. 

**==> picture [127 x 68] intentionally omitted <==**

**----- Start of picture text -----**<br>
RoHScompliant10 from 102+ REACHcompliant<br>M M<br>T T<br>ON ON<br>N P N P<br>C V C V<br>A R A R<br>E E<br>I O I O<br>M M<br>L L<br>R R<br>P D P D<br>O T O T<br>U U<br>C C<br>M M<br>E E<br>C C<br>E R E R<br>O T O T<br>R S R S<br>C S C S<br>**----- End of picture text -----**<br>


Model Numbering RACT18-____ o ~~y~~ _ Output Power Output Current 

IEC/EN61347 certified IEC/EN61347-2-13 certified EN61547 certified EN62493 certifed EN55015 compliant CB report 

**==> picture [364 x 201] intentionally omitted <==**

**----- Start of picture text -----**<br>
LO Specifications (measured @ Ta= 25°C, 240VAC, rated load unless otherwise specified)<br>BASIC CHARACTERISTICS<br>Parameter Condition Min. Typ. Max.<br>ee Input Voltage Range 198VAC 230VAC = 264VAC<br>RACT18-350,1050,1400 110mA<br>Input Current<br>RACT18-500,700 120mA<br>SS Inrush Current full load SEE 5A<br>a> No Load Power Consumption ee 1W<br>> Input Frequency Range 50Hz 60Hz<br>Power Factor full load 0.95<br>—— THD full load == 20%<br>——— Start-up Time —- 500ms<br>a continued on next page<br>**----- End of picture text -----**<br>


REV.:  4/2020 

L-1 

**www.recom-power.com** 

## **RACT18** 

## **AC/DC Converter** 

## **Series** 

Specifications (measured @ ta= 25°C, 240VAC, rated load unless otherwise specified) Parameter Condition Min. Typ. Max. RACT18-350,700,1050 60kHz Internal Operating Frequency RACT18-500 64kHz RACT18-1400 65kHz RACT18-350 150mA RACT18-500 200mA Output Ripple Current[(1)] RACT18-700 260mA RACT18-1050 700mA RACT18-1400 560mA Notes: Note1: Measured at 20MHz BW by using a 12” twisted pair-wie terminated with a 0.1µF and 47µF capacitor parallel across output ~~ar~~ REGULATIONS Parameter Condition Value Output Accuracy ±5% typ. Load Regulation 5% max. Line Regulation 5% max. 

PROTECTION Parameter Condition Value Input Fuse fusible resistor Short Circuit Protection (SCP) Latch OFF,  auto recovery   after fault condition is removed RACT18-350 60VDC max. RACT18-500 43VDC max. Latch OFF,  auto recovery Over Voltage Protection (OVP) RACT18-700 33VDC max. after fault condition is removed RACT18-1050 24VDC max. RACT18-1400 22VDC max. Over Load Protection (OLP) Latch OFF,  auto recovery   after fault condition is removed Over Temperature Protection (OTP) 110°C Latch OFF,  auto recovery   after fault condition is removed Isolation Voltage I/P to O/P tested for 1 minute 3.75kVAC Leakage Current 5mA max. Maximum loading of automatic circuit breakers* * @ 230VAC, 1Ohm, 90° phase angle and max. load Circuit Breaker Circuit Breaker Current Typ 10A 16A 20A 25A B 24 38 46 58 C 38 62 74 92 ~~eS~~ ENVIRONMENTAL Parameter Condition Value Operating Temperature Range without derating @ natural convection 0.1m/s (see graph) -20°C to +50°C Max. Case Temperature at tc point +80°C max. Operating Humidity non-condensing 5-85% RH IP Rating IP20 Pollution Degree PD2 Design Lifetime +25°C ambient >30 x 10³ hours ~~==~~ continued on next page **www.recom-power.com** REV.:  4/2020 L-2 

**RACT18 Series** 

**AC/DC Converter** 

**==> picture [525 x 238] intentionally omitted <==**

**----- Start of picture text -----**<br>
SS Specifications (measured @ Ta= 25°C, 240VAC, rated load unless otherwise specified)<br>Derating Graph<br>(@ Chamber and natural convection 0.1m/s)<br>100<br>90 a<br>80 ee<br>70 ee<br>60 ee<br>50 ee<br>40 ee ee<br>30 ee<br>20 ee ee<br>10 ee<br>a<br>0<br>-20 -10 0 10 20 30 40 50 60<br>Ambient Temperature [°C]<br>Output Load [%]<br>**----- End of picture text -----**<br>


SAFETY AND CERTIFICATIONS ~~Cn a~~ Certificate Type (Safety) Report Number Standard ~~a~~ Lamp controlgear Part 1: General and safety requirements (CB Scheme) 325797 IEC61347-1:2007 2nd Edition + A2:2012 Lamp controlgear Part 2-13: Particular requirements for d.c. or a.c. supplied electronic 325797 IEC61347-2-13:2014 2nd Edition ~~a~~ controlgear for LED modules (CB Scheme) ~~a~~ Lamp controlgear Part 1: General and safety requirements (LVD) EN61347-1:2015 Lamp controlgear Part 2-13: Particular requirements for d.c. or a.c. supplied electronic EN61347-2-13:2014 + A1:2017 ~~ee~~ controlgear for LED modules (LVD) Lamp controlgear Part 1: General and safety requirements 325797 EN61347-1:2008 + A2:2013 ~~eee eeeeeeeseoseseseseseseees~~ Lamp controlgear Part 2-13: Particular requirements for d.c. or a.c. supplied electronic 325797 EN61347-2-13:2014 ~~a~~ controlgear for LED modules ~~es~~ EAC RU-AT.49.09571 TP TC 004/2011 ~~of~~ RoHS 2+ RoHS 2011/65/EU + AM2015/863 ~~LC a~~ EMC Compliance Condition Standard / Criterion Limits and methods of measurement of radio disturbance characteristics of electrical EN55015:2013 + A1:2015 lighting and similar equipment 305985 Equipment for general lighting purposes – EMC immunity requirements EN61547:2009 ~~|Oo~~ Assessment of lighting equipment related to human exposure to electromagnetic fields ~~oO~~ EN62493:2015 ~~a~~ ESD Electrostatic discharge immunity test Air ±8kV, Contact ±4kV EN61000-4-2:2009, Criteria A ~~OO~~ Radiated, radio-frequency, electromagnetic field immunity test 3V/m EN61000-4-3:2006 + A2:2010, Criteria A AC Power Port: ±1kV Fast Transient and Burst Immunity EN61000-4-4:2012, Criteria A DC Power Port: ±0.5kV ~~aes~~ Surge Immunity AC Power Port: ±0.5kV EN61000-4-5:2014, Criteria A ~~sh~~ Immunity to conducted disturbances, induced by radio-frequency fields 3V/m EN61000-4-6:2014, Criteria A ~~TT~~ Voltage Dips and Interruptions Voltage Di ~~IT~~ ps >95% EN61000-4-11:2004, Criteria B ~~TT~~ Voltage Dips and Interruptions Voltage Dips 30% EN61000-4-11:2004, Criteria B ~~TT~~ Limits of Harmonic Current Emissions EN61000-3-2:2014, Class C ~~LO~~ Limits of Voltage Fluctuations & Flicker EN61000-3-3:2013, Clause 5 

REV.:  4/2020 

L-3 

**www.recom-power.com** 

## **RACT18** 

## **AC/DC Converter** 

## **Series** 

Specifications (measured @ Ta= 25°C, 240VAC, rated load unless otherwise specified) 

## DIMENSION and PHYSICAL CHARACTERISTICS 

**==> picture [525 x 571] intentionally omitted <==**

**----- Start of picture text -----**<br>
Parameter Type Value<br>case plastic (UL94V-2)<br>Material<br>PCB FR4 (UL94V-0)<br>Package Dimension (LxWxH) 120.0 x 45.0 x 28.0mm<br>————————— Package Weight 100g typ.<br>Dimensions Drawing (mm) =|<br>120.0<br>—<br>wire stripping length: 6-7mm<br>recommended tightening torque: 0.25Nm<br>N + tc= case temperature measuring point<br>L FC = fixing centers<br>Tolerance:  xx.x=  ±1.0mm<br>               xx.xx= ±0.5mm<br>|<br>Bottom View tc<br>42.0<br>Connection via Screw Terminal<br> Function  Solid Wire  Stranded Wire  [(2)] AWG<br>FC 13.3  VAC in (N)  0.75-2.5mm² 0.75-2.5mm² 20-14<br> VAC in (L)  0.75-2.5mm² 0.75-2.5mm² 20-14<br>without cable cover`s LED+  0.5-2.5mm² 0.5-2.5mm² 21-14<br>18.3 77.1 14.6 LED- 0.5-2.5mm² 0.5-2.5mm² 21-14<br>Notes:<br>   Note2:  The use of sleeve or ferrule terminations is recommended<br>R1.7 N +<br>Top View<br>L<br>6.4<br>PRI SEC 45.0<br>-<br>28.0<br>22.5<br>14.8 17.5<br>PRI 15.4 10.0 SEC<br>-<br>**----- End of picture text -----**<br>


REV.:  4/2020 

L-4 

**www.recom-power.com** 

|**AC/DC Converter**<br>Specifications(measured @ Ta= 25°C, 240VAC, rated load unless otherwise specified)<br>**RACT18**<br>**Series**<br>INSTALLATION and APPLICATION<br>DimmingType<br>Value<br>ACphase-cut<br>work with leading/trailingedge dimmers<br>Connection<br>L N<br>LED+<br>LED-<br>RECOM~~i~~<br>~~a~~<br>~~a~~|**AC/DC Converter**<br>Specifications(measured @ Ta= 25°C, 240VAC, rated load unless otherwise specified)<br>**RACT18**<br>**Series**<br>INSTALLATION and APPLICATION<br>DimmingType<br>Value<br>ACphase-cut<br>work with leading/trailingedge dimmers<br>Connection<br>L N<br>LED+<br>LED-<br>RECOM~~i~~<br>~~a~~<br>~~a~~|
|---|---|
|PACKAGING INFORMATION||
|Parameter<br>Type|Value|
|PackagingDimension(LxWxH)<br>cardboard box|330.0 x 137.0 x 55.0mm|
|PackagingQuantity|10pcs|
|Storage Temperature Range|-20°C to +70°C|
|Storage Humidity<br>non-condensing|5-85% RH|



The product information and specifications may be subject to changes even without prior written notice.The product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use in safety-critical applications without RECOM’s explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. 

REV.:  4/2020 

L-5 

**www.recom-power.com**