RACT09-500

• Triac –dimmable with leading or trailing edge dimmers • Class II with SELV output (no earth required) 

## Features 

TRIAC Dimmable LED Driver 

• Extra-large screw terminals and integrated cable clamps for easy installation • Power factor corrected >0.95 • Dimming range 1..100% • Compatible with a wide range of dimmers 

Description The RACT09-xxx series are low cost, triac-dimmable, constant current 9W LED drivers available with either 350mA, 500mA or 700mA full-range outputs. The drivers are Class II (double insulated) meaning ~~eee~~ no earth connection is required. The phase angle dimming works with leading or trailing edge dimmers. The RACT09 is suitable for indoor locations up to 50°C ambient temperature and is certified for building into furniture for applications such as dimmable shelf lighting, cove lighting or accent lighting. It is CE marked (LVD + EMC + RoHS), EAC and has IEC61347-1/IEC61347-2-13 CB report certification. 

|Selection Guide<br>Part<br>Input<br>Output<br>Output<br>Efficiency<br>Output<br>~~ee)~~|Selection Guide<br>Part<br>Input<br>Output<br>Output<br>Efficiency<br>Output<br>~~ee)~~|Selection Guide<br>Part<br>Input<br>Output<br>Output<br>Efficiency<br>Output<br>~~ee)~~|
|---|---|---|
|Number|Voltage Range<br>Voltage Range<br>Current<br>min. @rated load Power|min. @rated load Power|
|[VAC]<br>[VDC]<br>[mA]<br>[%]<br>[W]<br>RACT09-350<br>198-264<br>13-26<br>350<br>80<br>9<br>~~a~~|||
|RACT09-500|198-264<br>9-18<br>500<br>81|9|
|RACT09-700|198-264<br>7-13<br>700<br>76|9|
|All LED Drivers may not be used without a load. They must be switched on the primary side only.|All LED Drivers may not be used without a load. They must be switched on the primary side only.<br>Noncompliance may damage the LED or reduce its lifetime.||



## **AC/DC Converter** 

**RACT09 9 Watt 3 TRIAC** ~~.~~ **Dimmable Single Output r** 

**==> picture [127 x 68] intentionally omitted <==**

**----- Start of picture text -----**<br>
RoHScompliant10 from 102+ REACHcompliant<br>M M<br>T T<br>ON ON<br>N P N P<br>C V C V<br>A R A R<br>E E<br>I O I O<br>M M<br>L L<br>R R<br>P D P D<br>O T O T<br>U U<br>C C<br>M M<br>E E<br>C C<br>E R E R<br>O T O T<br>R S R S<br>C S C S<br>**----- End of picture text -----**<br>


## Model Numbering 

**==> picture [247 x 41] intentionally omitted <==**

**----- Start of picture text -----**<br>
RACT09-___<br>T L<br>Output Power Output Current<br>**----- End of picture text -----**<br>


## ~~SEE~~ eee Specifications (measured @ Ta= 25°C, 240VAC, rated load unless otherwise specified) BASIC CHARACTERISTICS 

IEC/EN61347 certified IEC/EN61347-2-13 certified EN61547 certified EN62493 certifed EN55015 compliant CB report 

|BASIC CHARACTERISTICS<br>~~SEE~~|BASIC CHARACTERISTICS<br>~~SEE~~|BASIC CHARACTERISTICS<br>~~SEE~~|BASIC CHARACTERISTICS<br>~~SEE~~|BASIC CHARACTERISTICS<br>~~SEE~~|
|---|---|---|---|---|
|Parameter|Condition|Min.|Typ.|Max.|
|Input Voltage Range||198VAC|230VAC|264VAC|
|Input Current||||60mA|
|Inrush Current|full load|||5A|
|No Load Power Consumption||||1W|
|Input FrequencyRange||50Hz||60Hz|
|Power Factor|full load|0.95|||
|continued on nextpage|||||



REV.:  4/2020 

L-1 

**www.recom-power.com** 

## **RACT09** 

## **AC/DC Converter** 

## **Series** 

Specifications (measured @ ta= 25°C, 240VAC, rated load unless otherwise specified) 

Parameter Condition Min. Typ. Max. THD full load 25% Start-up Time 500ms Internal Operating Frequency 60kHz RACT09-350 175mA Output Ripple Current[(1)] RACT09-500 350mA RACT09-700 900mA Notes: Note1: Measured at 20MHz BW by using a 12” twisted pair-wie terminated with a 0.1µF and 47µF capacitor parallel across output ~~er~~ REGULATIONS Parameter Condition Value Output Accuracyput Accuracyut Accuracyy ±5% typ.yp.. Load Regulationgulationulation 5% max. 

Notes: Note1: Measured at 20MHz BW by using a 12” twisted pair-wie terminated with a 0.1µF and 47µF capacitor parallel across output REGULATIONS Parameter Condition Value Output Accuracyput Accuracyut Accuracyy ±5% typ.yp.. Load Regulationgulationulation 5% max. Line Regulation 5% max. PROTECTION Parameter Condition Value Input Fuse fusible resistor Short Circuit Protection (SCP) Latch OFF,  auto recovery   after fault condition is removed RACT09-350 31VDC max. Latch OFF,  auto recovery Over Voltage Protection (OVP) RACT09-500 25VDC max. after fault condition is removed RACT09-700 17VDC max. Over Load Protection (OLP) Latch OFF,  auto recovery after fault condition is removed Over Temperature Protection (OTP) 110°C Latch OFF,  auto recovery after fault condition is removed Isolation Voltage I/P to O/P tested for 1 minute 3.75kVAC Leakage Current 5mA max. Maximum loading of automatic circuit breakers* * @ 230VAC, 1Ohm, 90° phase angle and max. load Circuit Breaker Circuit Breaker Current Typ 10A 16A 20A 25A B 36 57 69 85 C 57 87 109 134 ~~=o~~ ENVIRONMENTAL 

ENVIRONMENTAL Parameter Condition Value Operating Temperature Rangeperating Temperature Rangeerating Temperature Rangeg Temperature Range Temperature Rangeperature Rangeerature Rangegee without derating @ natural convection 0.1m/s (see graph)g @ natural convection 0.1m/s (see graph) @ natural convection 0.1m/s (see graph)(see graph)see graph)graph)raph)ph)h)) -20°C to +50°C Max. Case Temperature perature erature at tc pointpointoint +80°C max. Operating Humidityperating Humidityerating Humidityg Humidity Humidityy non-condensingg 5-85% RH IP Ratingg IP20 Pollution Degreegreeree PD2 Design Lifetimegn Lifetimen Lifetime +25°C ambient >30 x 10³ hours ~~=>~~ continued on next page 

Parameter Condition Value Operating Temperature Rangeperating Temperature Rangeerating Temperature Rangeg Temperature Range Temperature Rangeperature Rangeerature Rangegee without derating @ natural convection 0.1m/s (see graph)g @ natural convection 0.1m/s (see graph) @ natural convection 0.1m/s (see graph)(see graph)see graph)graph)raph)ph)h)) -20°C to +50°C Max. Case Temperature perature erature at tc pointpointoint +80°C max. Operating Humidityperating Humidityerating Humidityg Humidity Humidityy non-condensingg 5-85% RH IP Ratingg IP20 Pollution Degreegreeree PD2 Design Lifetimegn Lifetimen Lifetime +25°C ambient >30 x 10³ hours 

REV.:  4/2020 

L-2 

**www.recom-power.com** 

## **RACT09** 

## **AC/DC Converter** 

## **Series** 

Specifications (measured @ Ta= 25°C, 240VAC, rated load unless otherwise specified) 

**==> picture [368 x 210] intentionally omitted <==**

**----- Start of picture text -----**<br>
Derating Graph<br>(@ Chamber and natural convection 0.1m/s)<br>100<br>90 rr<br>80<br>Pot tT tT |<br>70<br>PF | | | te<br>60 Pot | ct |<br>50<br>Pot tt |<br>40 Pot | | | |<br>30 Pot tt |<br>20 Pot tT cE |Tt<br>10 Pot | tT |<br>a<br>0<br>-20 -10 0 10 20 30 40 50 60<br>Ambient Temperature [°C]<br>Output Load [%]<br>**----- End of picture text -----**<br>


SAFETY AND CERTIFICATIONS ~~Cn >~~ Certificate Type (Safety) Report Number Standard ~~a~~ Lamp controlgear Part 1: General and safety requirements (CB Scheme) 325797 IEC61347-1:2007 2nd Edition + A2:2012 Lamp controlgear Part 2-13: Particular requirements for d.c. or a.c. supplied electronic 325797 IEC61347-2-13:2014 2nd Edition ~~eea~~ controlLamp controlgear for LED modules gear Part 1: General and safet(CB Scheme) y requirements (LVD) ~~ee~~ EN61347-1:2015 Lamp controlgear Part 2-13: Particular requirements for d.c. or a.c. supplied electronic EN61347-2-13:2014 + A1:2017 ~~ee>~~ controlLamp controlgear for LED modules gear Part 1: General and safet(LVD) y requirements ~~ee~~ 325797 EN61347-1:2008 + A2:2013 Lamp controlgear Part 2-13: Particular requirements for d.c. or a.c. supplied electronic 325797 EN61347-2-13:2014 ~~ee~~ controlEAC gear for LED modules RU-AT.49.09571 ~~ee~~ TP TC 004/2011 ~~oo~~ RoHS 2+ RoHS 2011/65/EU + AM2015/863 ~~a ee~~ EMC Compliance Condition Standard / Criterion Limits and methods of measurement of radio disturbance characteristics of electrical ~~ee~~ EN55015:2013 + A1:2015 lighting and similar equipment 305985 Equipment for general lighting purposes – EMC immunity requirements EN61547:2009 ~~|~~ Assessment of lighting equipment related to human exposure to electromagnetic fields EN62493:2015 ~~Oooo~~ ESD Electrostatic discharge immunity test Air ±8kV, Contact ±4kV ~~oo~~ EN61000-4-2:2009, Criteria A ~~oo~~ Radiated, radio-frequency, electromagnetic field immunity test 3V/m EN61000-4-3:2006 + A2:2010, Criteria A AC Power Port: ±1kV Fast Transient and Burst Immunity EN61000-4-4:2012, Criteria A DC Power Port: ±0.5kV ~~ee~~ Surge Immunity AC Power Port: ±0.5kV ~~ee~~ EN61000-4-5:2014, Criteria A ~~ee~~ Immunity to conducted disturbances, induced by radio-frequency fields 3V/m EN61000-4-6:2014, Criteria A ~~a~~ Voltage Dips and Interruptions Voltage Dips >95% EN61000-4-11:2004, Criteria B ~~>~~ Voltage Dips and Interruptions Voltage Dips 30% EN61000-4-11:2004, Criteria B ~~a~~ Limits of Harmonic Current Emissions EN61000-3-2:2014, Class C ~~a~~ Limits of Voltage Fluctuations & Flicker EN61000-3-3:2013, Clause 5 

REV.:  4/2020 

L-3 

**www.recom-power.com** 

**RACT09 Series** 

## **AC/DC Converter** 

Specifications (measured @ Ta= 25°C, 240VAC, rated load unless otherwise specified) 

**==> picture [525 x 576] intentionally omitted <==**

**----- Start of picture text -----**<br>
DIMENSION and PHYSICAL CHARACTERISTICS<br>ee Parameter Type Value<br>case plastic (UL94V-2)<br>Material<br>PCB FR4 (UL94V-0)<br>EEE Package Dimension (LxWxH) 109.0 x 40.0 x 22.0mm<br>a Package Weight 70g typ.<br>Dimensions Drawing (mm) —4<br>109.0<br>wire stripping length: 6-7mm<br>N + recommended tightening torque: 0.25Nm<br>L @| tc= case temperature measuring pointFC = fixing centers<br>Tolerance:  xx.x=  ±1.0mm<br>               xx.xx= ±0.5mm<br>|<br>S y| S S<br>a n<br>Bottom View<br>tc<br>Connection via Screw Terminal<br>39.0<br> Function  Solid Wire  Stranded Wire  [(2)] AWG<br> VAC in (N)  0.75-2.5mm² 0.75-2.5mm² 20-14<br>reas  VAC in (L)  0.75-2.5mm² 0.75-2.5mm² 20-14<br>FC 13.3 LED+  0.5-2.5mm² 0.5-2.5mm² 21-14<br>LED- 0.5-2.5mm² 0.5-2.5mm² 21-14<br>without cable cover`s<br>27.5 66.1 15.4 Notes:<br>   Note2:  The use of sleeve or ferrule terminations is recommended<br>R1.7 N Top View +<br>L<br>a 6.4 O s<br>PRI SEC 40.0<br>-<br>22.0<br>20.0<br>15.0<br>PRI 10.0 SEC<br>-<br>**----- End of picture text -----**<br>


REV.:  4/2020 

L-4 

**www.recom-power.com** 

|**AC/DC Converter**<br>Specifications(measured @ Ta= 25°C, 240VAC, rated load unless otherwise specified)<br>**RACT09**<br>**Series**<br>INSTALLATION and APPLICATION<br>DimmingType<br>Value<br>ACphase-cut<br>work with leading/trailingedge dimmers<br>Connection<br>L N<br>LED+<br>LED-<br>RECOM~~i~~<br>~~a~~<br>~~a~~|**AC/DC Converter**<br>Specifications(measured @ Ta= 25°C, 240VAC, rated load unless otherwise specified)<br>**RACT09**<br>**Series**<br>INSTALLATION and APPLICATION<br>DimmingType<br>Value<br>ACphase-cut<br>work with leading/trailingedge dimmers<br>Connection<br>L N<br>LED+<br>LED-<br>RECOM~~i~~<br>~~a~~<br>~~a~~|
|---|---|
|PACKAGING INFORMATION||
|Parameter<br>Type|Value|
|PackagingDimension(LxWxH)<br>cardboard box|270.0 x 127.0 x 48.0mm|
|PackagingQuantity|10pcs|
|Storage Temperature Range|-20°C to +70°C|
|Storage Humidity<br>non-condensing|5-85% RH|



The product information and specifications may be subject to changes even without prior written notice.The product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use in safety-critical applications without RECOM’s explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. 

REV.:  4/2020 

L-5 

**www.recom-power.com**