RACD30-700

Features ● 30W Class II AC-DC LED Power Supply 

● 500mA or 700mA Constant Current 

● Drives 3 - 15 High brightness LEDs ● Universal AC Input ● Active Power Factor Correction  >0.95 

## LED 

## DRIVER 

## LIGHTLINE AC/DC-Converter with 5 year Warranty 

● Fused Input, Protected Output 

● 3kVAC Isolation ● UL-8750 Certified ● Output Connector to avoid miswiring 

● Low Cost 

● Long 5 Year Warranty 

## ~~Lo~~ Description 

A compact 30W constant current switching power module suitable for driving up to 15 high power LEDs (Vf = 3.6V). The output current is fixed at 500mA or 700mA.  Active power factor correction is standard. This series features both screw terminal and socket output connections. The socket connecter avoids the possibility of miswiring and damaging the LED load if the LEDs are preassembled into a wiring harness or lamp fitting. 

## 30 Watt PFC 

## Single 

## Output 

## Selection Guide 

|Part|Input Voltage|Input Current|Output|Output|Max|
|---|---|---|---|---|---|
|Number|Range|at full load|Voltage Range|Current|#|
||(VAC)|(mA)|(VDC)|(mA)|LEDs|
|RACD30-500|universal|390|10-56|500|15 x 2W|
|RACD30-700|universal|390|10-43|700|12 x 3W, 12+12 x 1W|



## Specifications (typical at 25°C and after warm up time unless otherwise specified ) 

|Input Voltage Range|Standard||90-264VAC|
|---|---|---|---|
|Rated Power||30 Watts max.||
|Input Frequency Range|||47-63 Hz|
|Power Factor|Full Load, 115VAC/230VAC||0.9|
|THD|Full Load, 115VAC||13% max.|
||Full Load, 230VAC||11% max.|
|Open Circuit Voltage|500mA Version||58VDC|
|(Zener Clamp)|700mA Version||48VDC|
|Inrush Current (<2mS)|115VAC/230VAC||10A max.|
|Input Current|230VAC, Full Load||390mA typ.|
|Leakage Current|115VAC/240VAC - 60/50Hz||0.5mA typ.|
|Input Fuse|Standard||T1A|
|Output Current Accuracy           (combined Tolerance, load Regulation and Line Regulation)|Output Current Accuracy           (combined Tolerance, load Regulation and Line Regulation)|Output Current Accuracy           (combined Tolerance, load Regulation and Line Regulation)|±10%|
|Minimum Load|Open Circuit Protected||3 LEDs|
|Hold Up Time|||18ms min.|
|Operating Frequency||40 - 100 kHz typ.|40 - 100 kHz typ.|
|Efficiency at Full Load|||85%|
|RMS Isolation Voltage (input to output)||3kVAC / 1 minute||
|Temperature Coefficient||±0.02%/°C typ.||
|Overload Protection|||120% typ.|
|Short Circuit Protection||Continuous Current Limit|Continuous Current Limit|
|Output Overvoltage Protection|500mA Version|56V Zener Diode Clamp|56V Zener Diode Clamp|
||700mA Version|43V Zener Diode Clamp|43V Zener Diode Clamp|
|Overtemperature Protection|Shutdown, Automatic restart after cooling down|Shutdown, Automatic restart after cooling down|Shutdown, Automatic restart after cooling down|



**==> picture [160 x 54] intentionally omitted <==**

**----- Start of picture text -----**<br>
RoHS<br>2011/65/EU<br>6/6<br>E340696<br>UL-8750  Certified<br>EN 61347 Certified<br>**----- End of picture text -----**<br>


RACD30 

continued on next page 

Refer to Application Notes 

REV: 1/2014 

www.recom-international.com 

L-39 

**==> picture [595 x 36] intentionally omitted <==**

## LIGHTLINE AC/DC-Converter 

## RACD30 Series 

**==> picture [526 x 302] intentionally omitted <==**

**----- Start of picture text -----**<br>
||||
|---|---|---|
|Specifications (typical at 25°C and after warm up time unless otherwise specified )|
|Operating Temperature Range|Ambient Temperature|-20°C to +50°C|
|(free air convection)|Case Temp.    85°C max. (500mA version: 90°C max.)|
|Weight|200g|
|Packing Quantity|1pc|
|Storage Temperature Range|-40°C to +100°C|
|Humidity|95% RH max.|
|IP Rating|IP20, Indoor Use Only|
|PCB Material|Plastic Resin with Fibreglass (UL94V-0)|
|Case Material|Plastic|
|Designed to meet Standards|Electrical Lighting, EMC Emissions|EN55015:2006 + A1: 2007 + A2:2009|
|Limits for Harmonics Emissions|EN 61000-3-2:2006|
|EMC Compatibilty: Flicker and Voltage Variations|EN 61000-3-3:2006|
|Electrical Lighting: EMC Immunity|EN 61547:1995 + A1:2000|
|Class II Power Supply Safety|UL1310|
|FCC|FCC18A|
|THD|<20%|
|Certifications|LED Lighting Safety|UL8750|
|SEMKO CE Certification, General Safety|EN 61347-1: 2008|
|SEMKO CE Certification, Safety of AC supplied Control Gear for LED Modules|EN 61347-2-13: 2006|
|Design Lifetime|25°C ambient|>70 x 10³ hours in operation|
|Connections|AC Input|Screw terminal|
|LED Output|Screw Terminal|
|LED Output|5.5mm Socket with 2mm Pin (Suitable matching plug Switchcraft S760 or similar)|

**----- End of picture text -----**<br>


## Note: 

All LED Drivers may not be used without a load. They must be switched on the primary side only.  Noncompliance may damage the LED or reduce its lifetime. 

**==> picture [523 x 15] intentionally omitted <==**

**----- Start of picture text -----**<br>
Package Style and Pinning<br>**----- End of picture text -----**<br>


**==> picture [485 x 268] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||||
|---|---|---|---|
|���|
|������������|
|�������|
|��|��|
|�����������|
|������������������|
|��|��|
|�|
|Connections|
|����������|���|CN1|Function|
|L|VAC in (L)|
|N|VAC in (N)|
|��|��|CN2|Function|
|+|LED+|
|-|LED-|
|2 Mounting screws are included|5.5mm Socket|Function|
|Tc=Case Temperature Measuring Point|
|Pin|LED+|
|Shell|LED-|
|Tolerance|
|XX =+/-1mm|
|XX.X =+/-0.5mm|

**----- End of picture text -----**<br>


The product information and specifications are subject to change without prior notice. All products are designed for non-safety critical commercial and industrial applications. The Buyer agrees to implement safeguards that anticipate the consequences of any failures that might cause harm, loss of life and/or damage property. 

L-40 

REV: 1/2014 

www.recom-power.com