RACD06-700

Features • 6W Class II AC-DC LED power supply • 350mA, 500mA and 700mA CC/CV output **AC/DC Converter** • Fused input and SCP, OVP, OLP, OTP LED • 3kVAC isolation • Universal input voltage range Driver • Low cost **RACD06** ee “wn Description **6 Watt** A compact universal input 6W constant current switching power module suitable for driving up to 12 high power LEDs.The output (dual constant voltage / constant current mode) current limit is fixed at **CC/CV** ; 3. 350mA, 500mA or 700mA. At lower output currents, the output is constant voltage. **Single Output** 

## Selection Guide 

Part Input CC CV Efficiency Rated Number Voltage Range Mode Mode[ (1)] typ. Power nom./max. [VAC] [VDC] [mA] [VDC] [mA] [%] [W] RACD06-350 90-264 3-22  350 24 0-300 79 6 / 7.2 RACD06-500 90-264 3-12  500 none 70 6 RACD06-700 90-264 3-8.4  700 12 0-600 72 6 / 7.2 ~~OO~~ @. All LED Drivers may not be used without a load. They must be switched on the primary side only. Noncompliance may damage the LED or reduce its lifetime. 

## Model Numbering 

**==> picture [49 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
E340696<br>**----- End of picture text -----**<br>


RACD06-___ nom. Output Power nom. Output Current 

Specifications (measured @ Ta= 25°C, nom. Vin, rated load and after warm-up unless otherwise stated) ~~LO~~ Kis BASIC CHARACTERISTICS ~~Po~~ Parameter Condition Min. Typ. Max. 90VAC 230VAC 264VAC Input Voltage Range 120VDC 370VDC In ~~——~~ put Current full load, 100VAC 200mA PSE certified Inrush Current ~~i ———~~ 115VAC/230VAC, <2ms ~~[ee] ee ee~~ 10A CB Report 350mA 26VDC Open Circuit Voltage no load 500mA 17VDC 700mA 14VDC Input Frequency Range 47Hz 63Hz 115VAC 0.40 Power Factor full load 230VAC 0.55 Hold-up Time 18ms Output Ripp ~~—-——}~~ le Current ~~|+} —~~ 200mAp-p 

UL8750 certified UL1310 certified CAN/CSA-C22.2 No. 223-M91 certified IEC/EN61347 certified IEC/EN61347-2-13 certified ENEC certified PSE certified CB Report 

continued on next page 

REV.:  1/2019 

L-1 

**www.recom-power.com** 

**AC/DC Converter** 

## **RACD06** 

## **Series** 

~~LSS~~ Specifications (measured @ Ta= 25°C, nom. Vin, rated load and after warm-up unless otherwise stated) 

## Constant Current (CC) and Constant Voltage (CV)[(1)] 

CV RACD06-350 24V 22V RACD06-500 RACD06-700 12V 12V CV 8.4V CC CC CC 3V ~~=~~ Output Current Nominal Current Limits Notes: Note1: CV Mode is approved by Recom internal quality standard, but not certified PROTECTION Parameter Condition Value ~~ee ee~~ Input Fuse T2A, slow blow ~~pp~~ Short Circuit Protection (SCP) continuous, current limit ~~pp~~ Overload Protection (OLP) 120% typ. ~~pp~~ Over Temperature Protection (OTP) shutdown, automatic resatart after cooling down ~~eG~~ Isolation Voltage I/P to O/P 3.75kVAC / 1 minute 

Notes: 

Note2: Refer to local safety regulations if input over-current protection is also required 

Maximum loading of automatic circuit breakers* 

* @ 115VAC, 1Ohm, 90° phase angle and max. load 

* @ 230VAC, 1Ohm, 90° phase angle and max. load 

|Circuit Breaker<br>Typ|10A|Circuit Breaker Current<br>16A<br>20A|Circuit Breaker Current<br>16A<br>20A|Circuit Breaker Current<br>16A<br>20A|Circuit Breaker Current<br>16A<br>20A|25A||Circuit Breaker<br>Typ<br>B|10A<br>80|Circuit Breaker Current<br>16A<br>20A<br>157<br>200|Circuit Breaker Current<br>16A<br>20A<br>157<br>200|Circuit Breaker Current<br>16A<br>20A<br>157<br>200|Circuit Breaker Current<br>16A<br>20A<br>157<br>200|25A<br>254|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|C|221||247|337||430||C|265||317|437||550|



## ENVIRONMENTAL 

|ENVIRONMENTAL|ENVIRONMENTAL|ENVIRONMENTAL|
|---|---|---|
|Parameter|Condition|Value|
|Operating Temperature Range|according to UL<br>accordingto ENEC<br>RACD06-350<br>RACD06-500, RACD06-700<br>all|-20°C to +50°C<br>-20°C to +40°C<br>-20°C to +50°C|
|Max. Case Temperature|according to UL<br>accordingto ENEC<br>RACD06-350<br>RACD06-500, RACD06-700<br>all|+75°C max.<br>+70°C max.<br>+70°C max.|
|IP Rating||IP20|
|OperatingHumidity|non condensing|5%-85% RH|
|Design Lifetime|+25°C ambient|20 x 103hours|
|continued on nextpage|||



continued on next page 

REV.:  1/2019 

L-2 

**www.recom-power.com** 

**RACD06 Series** 

**AC/DC Converter** 

~~Lo~~ Specifications (measured @ Ta= 25°C, nom. Vin, rated load and after warm-up unless otherwise stated) 

**==> picture [369 x 218] intentionally omitted <==**

**----- Start of picture text -----**<br>
Derating Graph<br>RACD06-350<br>100<br>90 a<br>80706050403020100 |fF|fF|fF|PF fF |||||||| | | |||||||| |||||||| | |||||||| | | |||||||| [[|[|[|[|[ [| [|| fTfTfTfyfTfyfT[| jf ||||||| |<br>-20 -10 0 10 20 30 40 50 60<br>Ambient Temperature [°C]<br>Output Load [%]<br>**----- End of picture text -----**<br>


|SAFETY AND CERTIFICATIONS<br>~~Cee~~<br>~~ee~~|SAFETY AND CERTIFICATIONS<br>~~Cee~~<br>~~ee~~|SAFETY AND CERTIFICATIONS<br>~~Cee~~<br>~~ee~~|
|---|---|---|
|Certificate Type (Safety)<br>~~Cee~~<br>~~eee~~~~**e**~~|Report Number<br>~~Cee~~|Standard<br>~~Cee~~|
|Standard for LED Equipment for use in LightingProducts<br>~~eee~~~~**e**~~|E340696-1-3<br>~~ee~~<br>~~tr~~|UL8750, 1st Edition, 2009|
|Standard for Class 2 Power Units<br>~~e~~~~**e**~~<br>~~P~~||UL1310, 5th Edition, 2010<br>~~ee~~|
|Extra Low Voltage Class 2 Outputs<br>~~e~~~~**e**~~<br>~~P~~||CAN/CSA-C22.2 No. 223-M91, 2nd Edition, 2009<br>~~ee~~|
|Equipment forgeneral LightingPurpose EMC ImmunityRequirements(CB scheme)<br>~~e~~~~**e**~~<br>~~P~~<br>~~rs~~|SH12051509-002<br>~~ee~~<br>~~rs~~<br>~~tr~~|IEC61547, 2nd Edition, 2009<br>~~ee~~<br>~~rs~~|
|LampControlgear Particular Requirements(CB scheme)<br>~~rs~~<br>~~ns~~|12CA61275-1<br>~~rs~~<br>~~tr~~<br>~~ns~~|IEC/EN61347-2-13, 2006<br>~~rs~~<br>~~ns~~|
|LampControlgear Particular Requirements<br>~~ns~~<br>~~rs~~|SH12051508-002<br>~~ns~~<br>~~rs~~|EN61347-2-13,2006<br>~~ns~~<br>~~rs~~|
|Lamp Controlgear General Requirments for Safety (CB scheme)<br>~~rs~~|12CA61275-1<br>~~rs~~|IEC61347-1, 2nd Edition, 2010<br>EN61347-1,2nd Edition,2011<br>~~rs~~|
|LampControlgear General Requirments for Safety<br>~~rr~~|SH12051508-002<br>~~rr~~|EN61347-1, 2nd Edition, 2008<br>~~rr~~|
|Luminaires General Requirements and Tests<br>~~ee~~|SH12051508-003<br>~~ee~~<br>~~tt~~<br>|EN60598-1, 2009<br>~~ee~~|
|Luminaires with built-in transformers for filament lamps<br>~~ee~~<br>~~Dee~~||EN60598-2-6, 1997<br>~~ee~~|
|D.C. or A.C. Controlgears for LED Performance Requirements(CB scheme)<br>~~ee~~<br>~~ns~~<br>~~Dee A~~|12CA61275-2<br>~~ee~~<br>~~ns~~<br>~~tt~~<br>~~A~~|IEC/EN62384, 2009<br>~~ee~~<br>~~ns~~<br>~~Gee~~|
|LampControlgear General Requirments for Safety (ENEC License)<br>~~ns~~<br>~~Dee A~~|ENEC-00610<br>~~ns~~<br>~~tt~~<br>~~A~~|EN61347-1<br>~~ns~~<br>~~Gee~~|
|LampControlgear Particular Requirements(ENEC License)<br>~~Dee A~~||EN61347-2-13<br>~~Gee~~|
|LampControlgear General Requirments for Safety (PSE)<br>~~Dee A~~|~~tt~~<br>~~A~~|J61347-1<br>~~Gee~~|
|LampControlgear Particular Requirements(PSE)<br>~~rs~~|~~rs~~|J63147-2-13<br>~~rs~~|
|RoHS<br>~~rs~~<br>~~rs~~|~~rs~~<br>~~rs~~|RoHS 6/6,2011/65/EU<br>~~rs~~<br>~~rs~~|
|EAC<br>~~rr~~|RUД- AT.AГ03.В.67369<br>~~rr~~|TP TC 004/020,2011<br>~~rr~~|
|~~nn~~<br>~~Be~~<br>~~ee~~|||
|EMC Compliance<br>~~ns~~<br>~~Be~~|Condition<br>~~ns~~<br>~~nn~~<br>~~ee~~|Standard / Criterion<br>~~ns~~<br>~~ee~~|
|EMC for industrial, scientific and medical equipment(design to meet)<br>~~Be~~|~~nn~~<br>~~ee~~|FCC18, Class A<br>~~ee~~|
|Limits and methods of measurement of radio disturbance characteristics of<br>electrical lightingand similar equipment(design to meet)<br>~~Be~~<br>~~ee~~||EN55015, Class A<br>CISPR15, 7th Edition, 2009<br>~~ee~~|
|Limits and methods of measurement of radio disturbance characteristics of<br>electrical lightingand similar equipment(PSE)<br>~~eea~~||J55015|
|Limits of harmonic current emissions<br>Voltage Fluctuations and Flicker in Public Low-Voltage Systems <=16Aperphase<br>~~eea~~||IEC61000-3-2, 3rd Edition, 2009<br>IEC61000-3-3,2nd Edition,2008|



REV.:  1/2019 

L-3 

**www.recom-power.com** 

**RACD06 Series** 

**AC/DC Converter** 

Specifications (measured @ Ta= 25°C, nom. Vin, rated load and after warm-up unless otherwise stated) DIMENSION and PHYSICAL CHARACTERISTICS ~~————~~ Parameter Type Value Material case plastic (UL94V-0) Dimension (LxWxH) 68.0 x 35.0 x 21.0mm Weight 34g 

## Dimensions Drawing (mm) 

**==> picture [525 x 529] intentionally omitted <==**

**----- Start of picture text -----**<br>
Connection via Screw Terminal<br>Ø3.0 15.0  #  Function  Solid Wire  Stranded Wire [ (3)] AWG<br> 1  VAC in (N) 0.75-1.5mm² 0.75-1.5mm² 18-16<br>3  2  VAC in (L) 0.75-1.5mm² 0.75-1.5mm² 18-16<br>4  3  LED+  0.75-1.5mm² 0.75-1.5mm² 18-16<br> 4  LED- 0.75-1.5mm² 0.75-1.5mm² 18-16<br>wire stripping length: 5mm<br>tc recommended tightening torque: 0.22Nm<br>tc= case temperature measuring point<br>FC = fixing centers<br>1 Tolerance:  xx.x=  ±0.5mm<br>2                xx.xx= ±0.35mm<br>2 Mounting screws are included<br>Hh FC 64.0<br>58.0 35.0<br>68.0<br>=<br>Notes:<br>   Note3:  The use of sleeve or ferrule terminations is recommended<br>INSTALLATION and APPLICATION<br>Ce<br>Connection<br>L N<br>LED+<br>LED-<br>5<br> 11.<br>C<br>F FC 23.5<br>13.0<br>21.0<br>1.50<br>**----- End of picture text -----**<br>


REV.:  1/2019 

L-4 

**www.recom-power.com** 

**RACD06 Series** 

**AC/DC Converter** 

|PACKAGING INFORMATION|PACKAGING INFORMATION|PACKAGING INFORMATION|
|---|---|---|
|Parameter|Type|Value|
|PackagingDimension(LxWxH)|cardboard Box|215.0 x 80.0 x 70.0mm|
|PackagingQuantity||10pcs|
|Storage Temperature Range||-30° to +80°C|
|Storage Humidity|non-condensing|5%-85% RH|



The product information and specifications may be subject to changes even without prior written notice.The product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use in safety-critical applications without RECOM’s explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. 

REV.:  1/2019 

L-5 

**www.recom-power.com**