RACD06-350

## Features 

## LED Driver 

● 6W AC-DC Class II LED Power Supply 

● 350mA to 700mA CC/CV Output 

● ENEC, UL, RCM and CB Certified ● Universal Input Voltage Range ● Fused Input, Protected Output 

## LIGHTLINE AC/DC-Converter with 3 year Warranty 

● 3.75kVAC Isolation ● Low Cost ● 3 Year Warranty 

## ~~I~~ Description 

A compact universal input 6W constant current switching power module suitable for driving up to 12 high power LEDs.The output (dual constant voltage / constant current mode) current limit is fixed at 350mA, 500mA or 700mA. At lower output currents, the output is constant voltage. 

## ~~ee~~ Selection Guide 

|Part|Nominal|Input Current|Output|Output|Max|Efficiency|
|---|---|---|---|---|---|---|
|Number|Input Voltage<br>(VAC)|at full load<br>(mA)|Voltage Range<br>(VDC)|Current<br>(mA)|#<br>LEDs|typ.<br>(%)|
|RACD06-350|universal|120|2.5-24|350|6 x 1W|79|
|RACD06-500|universal|120|2.5-15|500|12 x 0.5W|70|
|RACD06-700<br>universal<br>120<br>2.5-12<br>700<br>3 x 2W<br>72<br>~~nn!~~|||||||



## 6 Watt Single Output 

Specifications (typical at 25°C and after warm up time unless otherwise specified ) ~~LS~~ 

|Input Voltage Range||90-264VAC or 120-370VDC|
|---|---|---|
|Rated Power||6W nom. / 7.5W max.|
|Input FrequencyRange||47-63 Hz|
|Power Factor<br>Output Voltage Range|Full Load, 115VAC/230VAC<br>350mA CC<br>0-300mA CV|0.4<br>2.5 - 22VDC<br>24V typ.|
||500mA CC|2.5 - 13VDC|
||0-490mA CV|15V typ.|
||700mA CC<br>0-600mA CV|2.5 - 10VDC<br>12V typ.|
|Inrush Current(<2mS)|115VAC/230VAC|10A max.|
|Leakage Current|115VAC/240VAC - 60/50Hz|0.4mA typ.|
|Input Fuse(Built-in)|Standard|T2A|
|Input Current|Full Load, Nominal Vin|see table|
|Output Current Accuracy (combined Tolerance, Load Regulation and Line Regulation)<br>±10%|||
|Minimum Load|Open Circuit Protected|1 LED|
|Output Ripple||0.2Ap-pmax.|
|Hold UpTime||18ms min.|
|OperatingFrequency||132kHz max.|
|AC RMS Isolation Voltage|I/P to O/P|3.75kV / 1 minute|
|Temperature Coefficient||±0.02%/°C typ.|
|Overload Protection||120% typ.|
|Short Circuit Protection||Continuous Current Limit|
|Output Overvoltage Protection|350mA Version|24V Zener Diode Clamp|
||500mA Version|14V Zener Diode Clamp|
||700mA Version|12V Zener Diode Clamp|
|Overtemperature Protection|Shutdown, Automatic restart after coolingdown||
|Operating Temperature Range|Ambient Temperature|-20°C to +40°C|
|(free air convection, according to CE/UL)|Case Temperature|70°C max.|
|Operating Temperature Range|Ambient Temperature                              -20°C to +50°C|Ambient Temperature                              -20°C to +50°C|
|(free air convection, accordingto ENEC)|Case Temperature                                            70°C max.|erature                                            70°C max.|
|||continued on next page|



**==> picture [106 x 28] intentionally omitted <==**

**----- Start of picture text -----**<br>
RoHS<br>2011/65/EU<br>6/6<br>E340696<br>**----- End of picture text -----**<br>


UL-8750  Certified EN 61347 Certified ENEC Certified 

## RACD06 

Refer to Application Notes 

REV:  0/2015 

L-21 

www.recom-power.com 

## LIGHTLINE AC/DC-Converter 

## RACD06 Series 

Specifications (typical at 25°C and after warm up time unless otherwise specified ) 

**==> picture [518 x 253] intentionally omitted <==**

**----- Start of picture text -----**<br>
||||
|---|---|---|
|Storage Temperature Range|-40°C to +85°C|
|Humidity|95% RH max.|
|IP Rating|IP20, Indoor Use Only|
|Weight|34g|
|Packing Quantity|10pc|
|PCB Material|(UL94V-0)|Plastic Resin with Fibreglass|
|Case Material|(UL94V-0)|Plastic|
|Designed to meet Standards|Electrical Lighting, EMC Emissions|EN55015:2006 + A1: 2007 + A2:2009|
|Limits for Harmonics Emissions|EN 61000-3-2:2006|
|EMC Compatability: Flicker and Voltage Variations|EN 61000-3-3:2006|
|Electrical Lighting: EMC Immunity|EN 61547:1995 + A1:2000|
|Class II Power Supply Safety|UL1310|
|FCC|FCC18A|
|Certifications|LED Lighting Safety (E340696)|UL8750|
|RCM (U21382)|AS/NZS 61347.1:2002, IEC 61347-2-13|
|ENEC General Safety|EN 61347-1: 2008|
|ENEC Safety of AC supplied Control Gear for LED Modules|EN 61347-2-13: 2006|
|PSE|J61347-1(H20), J61347-2-13(H21), J55015(H20)|
|Design Lifetime|25°C ambient|>20 x 10³ hours in operation|
|Connections|AC Input|Screw terminal|
|LED Output|Screw Terminal|

**----- End of picture text -----**<br>


## Note: 

All LED Drivers may not be used without a load. They must be switched on the primary side only.  Noncompliance may damage the LED or reduce its lifetime. 

## Characteristics 

## Constant Current (CC) and Constant Voltage (CV) Graph 

**==> picture [287 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
RACD06-350 RACD06-500 RACD06-700<br>**----- End of picture text -----**<br>


**==> picture [183 x 114] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||||||
|---|---|---|---|---|---|
|Maximum Number of LED drivers|
|per circuit breakers|
|Condition|Circuit Breaker|Circuit Breaker Current|
|Typ|10A|16A|20A|25A|
|115VAC, 1Ohm|
|C|221|247|337|430|
|90° phase angle|
|230VAC, 1Ohm|B|80|157|200|254|
|90° phase angle|C|265|317|437|550|

**----- End of picture text -----**<br>


## Package Style and Pinning 

**==> picture [228 x 125] intentionally omitted <==**

**----- Start of picture text -----**<br>
Connections<br>2 Mounting screws are included CN1 Function<br>——Jq__q_—<br>Tc = Case Temperature Measuring Point L VAC in (L)<br>as<br>FC = Fixing Centers N VAC in (N)<br>CN2 Function<br>+ LED+<br>35.0 re<br>- LED-<br>Tolerance<br>XX = +/-0.5mm<br>XX.X = +/-0.25mm<br>**----- End of picture text -----**<br>


The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. 

REV: 0/2015 

L-22 

www.recom-power.com