RACD03-350

- 3W Class II AC-DC LED power supply 

## Features 

• 350mA, 500mA and 700mA CC/CV output 

• Fused input and SCP, OVP, OLP, OTP 

LED • 3kVAC isolation • IP66 rated Driver • Low cost 

## Description ~~Lo~~ 

A compact universal AC input 3W constant current switching power module suitable for driving 1 - 6 high power LEDs. The output (dual constant voltage / constant current mode) current limit is fixed at 350mA, 500mA or 700mA. At lower output currents, the output is constant voltage. Connections are via 118mm long flying leads. 

## **AC/DC Converter** 

## **RACD03** 

## **3 Watt CC/CV Single Output** 

## Selection Guide 

|Part|Input|CC|CV|CV(1)|Efficiency|Rated|
|---|---|---|---|---|---|---|
|Number|Voltage Range|Mode|Mode|Mode|typ.|Power nom./max.|
|~~Ce~~|[VAC]<br>~~Ce~~|[VDC] [mA]<br>~~Ce~~|[VDC] [mA]<br>~~Ce~~||[%]<br>~~Ce~~|[W]<br>~~Ce~~|
|RACD03-350|90-264|3-12  350|15|15<br>0-300|72|3 / 4.2|
|RACD03-500|90-264|3-9.5  500                   none|3-9.5  500                   none|3-9.5  500                   none|71|3 / 4.6|
|RACD03-700|90-264|3-4.5  700|6|0-600|62|3 / 3.1|



All LED Drivers may not be used without a load. They must be switched on the primary side only. Noncompliance may damage the LED or reduce its lifetime. 

**E340696** 

## Model Numbering 

## RACD03-___ 

nom. Output Power nom. Output Current 

eee Specifications (measured @ Ta= 25°C, nom. Vin, rated load and after warm-up unless otherwise stated) BASIC CHARACTERISTICS ~~a~~ Parameter Condition Min. Typ. Max. 90VAC 230VAC 264VAC Input Voltage Range 120VDC 370VDC ~~eees a~~ Input Current full load, 100VAC ~~ee~~ 110mA ~~ee~~ Inrush Current 230VAC, <2ms 10A ~~ee~~ Input Frequency Range 47Hz 63Hz ~~Ge~~ Power Factor full load, 230VAC 0.55 ~~ee~~ Hold-up Time 18ms Output Ripple Current 100mAp-p ~~a~~ continued on next page 

UL8750 certified UL1310 certified CAN/CSA-C22.2 No. 223-M91 certified IEC/EN61347 certified IEC/EN61347-2-13 certified ENEC certified CB report 

REV.:  3/2019 

L-1 

**www.recom-power.com** 

## **RACD03** 

## **AC/DC Converter** 

## **Series** 

Specifications (measured @ Ta= 25°C, nom. Vin, rated load and after warm-up unless otherwise stated) 

**==> picture [366 x 162] intentionally omitted <==**

**----- Start of picture text -----**<br>
Constant Current (CC) and Constant Voltage (CV)  [(1)]<br>CV RACD03-350<br>15V<br>RACD03-500<br>12V RACD03-700<br>9.5V<br>CV<br>6V<br>4.5V<br>CC CC CC<br>3V<br>Output Current<br>Nominal Current Limits<br>Output Voltage<br>0mA<br>300mA 350mA 500mA 600mA 700mA<br>**----- End of picture text -----**<br>


Notes: Note1: CV Mode is approved by Recom internal quality standard, but not certified 

PROTECTION ~~a~~ Parameter Condition Value ~~Ge Ge~~ Input Fuse[(2)] T1A, slow blow ~~Ge~~ Short Circuit Protection (SCP) continuous, current limit ~~Ge~~ Overload Protection (OLP) 120% typ. RACD03-350 17VDC max. Output Over Voltage Protection (OVP) zener diode clamp RACD03-500 14VDC max. ~~a ee~~ RACD03-700 8VDC max. Over Temperature Protection (OTP) shutdown, automatic resatart after cooling down ~~Ge~~ Isolation Voltage I/P to O/P 3.75kVAC/1 minute typ. / 3kVAC/1 minute min. ~~De~~ Leakage Current 0.2mA typ. 

Notes: 

Note2: Refer to local wiring regulations if input over-current protection is also required 

Maximum loading of automatic circuit breakers* 

* @ 115VAC, 1Ohm, 90° phase angle and max. load 

* @ 230VAC, 1Ohm, 90° phase angle and max. load 

|Circuit Breaker||Circuit Breaker Current|Circuit Breaker Current|Circuit Breaker Current|Circuit Breaker Current|||Circuit Breaker||Circuit Breaker Current|Circuit Breaker Current|Circuit Breaker Current|Circuit Breaker Current||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|Typ|10A||16A|20A||25A||Typ|10A||16A|20A||25A|
|C|221||247|337||430||B|80||157|200||254|
|||||||||C|265||317|437||550|



## ENVIRONMENTAL 

|ENVIRONMENTAL|ENVIRONMENTAL|ENVIRONMENTAL|
|---|---|---|
|Parameter|Condition|Value|
|Operating Temperature Range|according to UL<br>accordingto ENEC|-20°C to +50°C<br>-20°C to +40°C|
|Max. Case Temperature|according to UL<br>accordingto ENEC<br>RACD03-350, RACD03-700<br>RACD03-500|+67°C<br>+65°C<br>+75°C|
|IP Rating||IP66|
|OperatingHumidity|non condensing|5% - 85% RH max.|
|Design Lifetime|+25°C ambient|20 x 103hours|
|continued on nextpage|||



continued on next page 

REV.:  3/2019 

L-2 

**www.recom-power.com** 

**RACD03 Series** 

**AC/DC Converter** 

**==> picture [525 x 229] intentionally omitted <==**

**----- Start of picture text -----**<br>
Lo Specifications (measured @ Ta= 25°C, nom. Vin, rated load and after warm-up unless otherwise stated)<br>Derating Graph<br>100<br>90 ee<br>80 PF ee<br>70 PF | | | | fF fl fy<br>60 PF | | jf ff tf<br>50 PF | | f| | fl tf<br>40 PF | | jf | fl td<br>30 fF | | f|| | f tl tl<br>20 PF fy<br>10 PF | | | ffl tl<br>0 PF | | | | ft| ft fy gf<br>-20 -10 0 10 20 30 40 50 60<br>Ambient Temperature [°C]<br>Output Load [%]<br>**----- End of picture text -----**<br>


|SAFETY AND CERTIFICATIONS<br>~~Cee~~<br>~~tren~~<br>~~en~~|SAFETY AND CERTIFICATIONS<br>~~Cee~~<br>~~tren~~<br>~~en~~|SAFETY AND CERTIFICATIONS<br>~~Cee~~<br>~~tren~~<br>~~en~~|
|---|---|---|
|Certificate Type(Safety)<br>~~nn~~<br>~~en~~|Report Number<br>~~nn~~<br>~~tren~~<br>|Standard<br>~~nn~~|
|Standard for LED Equipment for use in LightingProducts<br>~~en~~<br>~~**Pe**~~|E340696-1-4<br>~~tren~~<br>~~i~~|UL8750, 1st Edition, 2009<br>~~**ee**~~|
|Standard for Class 2 Power Units<br>~~en~~<br>~~**Pe**~~||UL1310, 6th Edition, 2011<br>~~**ee**~~|
|Extra Low Voltage Class 2 Outputs<br>~~en~~<br>~~**Pe**~~<br>~~Pe~~||CAN/CSA-C22.2 No. 223-M91, 2nd Edition, 2009<br>~~**ee**~~<br>~~ee~~|
|LampControlgear Particular Requirements<br>~~en ~~<br>~~**Pe**~~<br>~~Pe~~<br>~~Se~~|SH12051509-001<br>~~tren~~<br> ~~i~~<br>~~Se~~|IEC/EN61347-2-13,2006<br>~~**ee**~~<br>~~ee~~<br>~~Se~~|
|Lamp Controlgear General Requirments for Safety<br>~~Pe~~<br>~~Se~~<br>~~Be~~<br>~~Se~~||IEC61347-1, 2nd edition, 2010<br>EN61347-1,2nd edition,2011<br>~~ee~~<br>~~Se~~<br>~~Bo~~|
|Safetyof controlgear for LED modules(CB Scheme)<br>~~Se~~<br>~~Be~~<br>~~Se~~|12CA61285-1<br>~~Se~~|IEC/EN61347-2-13,2006<br>~~Se~~<br>~~Bo~~|
|Safety requirements for lamp controlgear (CB Scheme)<br>~~Be~~<br>~~Se~~<br>~~Pe~~<br>~~en~~||IEC61347-1, 2nd Edition, 2010<br>EN61347-1,2nd Edition,2011<br>~~Bo~~<br>~~ee~~|
|LampControlgear General Requirments for Safety (ENEC License)<br>~~Se~~<br>~~Pe~~<br>~~en~~|ENEC-00611|EN61347-1<br>~~ee~~|
|LampControlgear Particular Requirements(ENEC License)<br>~~Pe~~<br>~~en~~<br>~~Be~~||EN61347-2-13<br>~~ee~~<br>~~ee~~|
|D.C. or A.C. Controlgears for LED Performance Requirements(ENEC License)<br>~~en~~<br>~~Be~~||EN62348, 2006<br>~~ee~~|
|RoHS<br>~~en~~<br>~~Be~~<br>~~rn~~|~~rn~~|RoHS 6/6, 2011/65/EU<br>~~ee~~<br>~~rn~~|
|EAC<br>~~rs~~|RUД- AT.AГ03.В.67369<br>~~rs~~|TP TC 004/020, 2011<br>~~rs~~|
||||
|EMC Compliance<br>~~nD~~|Condition<br>~~nD~~|Standard / Criterion<br>~~nD~~|
|EMC for industrial, scientific and medical equipment(design to meet)<br>~~i~~<br>~~BC~~|~~i~~|FCC18, Class A<br>~~Se~~|
|Limits and methods of measurement of radio disturbance characteristics of<br>electrical lighting and similar equipment (design to meet)<br>~~i~~<br>~~BC~~<br>~~a~~||EN55015, Class A<br>~~Se~~<br>~~ee~~|
|||CISPR15, 7th Edition, 2009<br>~~Se~~<br>~~ee~~|
|Electromagnetic compatibility - Requirements for household appliances, electric<br>tools and similar apparatus - Part 1: Emission(design to meet)<br>~~i~~<br>~~BC~~<br>~~a~~<br>~~a~~|~~i~~|EN55014-1<br>~~Se~~<br>~~ee~~|
|Limits of harmonic current emissions<br>Voltage Fluctuations and Flicker in Public Low-Voltage Systems <=16Aperphase<br>~~a~~<br>~~a~~||IEC61000-3-2, 3rd Edition, 2009<br>IEC61000-3-3,2nd Edition,2008<br>~~ee~~|



REV.:  3/2019 

L-3 

**www.recom-power.com** 

**Series** 

## **RACD03** 

## **AC/DC Converter** 

Specifications (measured @ Ta= 25°C, nom. Vin, rated load and after warm-up unless otherwise stated) 

**==> picture [525 x 635] intentionally omitted <==**

**----- Start of picture text -----**<br>
DIMENSION and PHYSICAL CHARACTERISTICS<br>a Parameter Type Value<br>case plastic (UL94V-2)<br>Material PCB plastic resin with fibreglass (UL94V-0)<br>potting silicone (UL94V-0)<br>EEE Dimension (LxWxH)       52.1 x 29.6 x 23.1mm<br>RD Weight                                    45g<br>Dimensions Drawing (mm)<br>215             -20 [+10] 10±1<br>3<br>Wired Connection<br>—~— =<br>4  #  Function Wire Color  Type<br>double insulation  1 VAC in (N)  blue  UL-1007, AWG18<br>Ø3.0  2  VAC in (L)  brown  UL-1007, AWG18<br>1 tc es  3  4  LED+ LED- black red  ULUL--1007, AWG181007, AWG18<br>2 ——<br>6±1             -20215 +10 4.0 tc= case temperature measuring pointFC = fixing centers<br>Tolerance:  xx.x=  ±0.5mm<br>38.1<br>               xx.xx= ±0.35mm<br>FJ 5 FC 46.1 r r r 2 Mounting screws are included e<br>29.6<br>52.1<br>—J LL<br>INSTALLATION and APPLICATION<br>Connection<br>L N<br>LED+<br>LED-<br>PACKAGING INFORMATION<br>Parameter Type Value<br>Packaging Dimension (LxWxH) cardboard Box 265.0 x 80.0 x 115.0mm<br>Packaging Quantity 10pcs<br>Storage Temperature Range -30°C to +80°C<br>Storage Humidity non-condensing 5%-85% RH<br>SEC<br>PRI<br>5.0<br>23.1<br>1.3±0.1<br>**----- End of picture text -----**<br>


The product information and specifications may be subject to changes even without prior written notice.The product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use in safety-critical applications without RECOM’s explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. 

REV.:  3/2019 

L-4 

**www.recom-power.com**