RAC05-24SK/C14

• Unique, patent-pending design Features • Isolated power supply with integrated mains filter • Packaged inside of line filter case **AC/DC Converter** • Safe, touchable DC outputs Regulated • Easy installation Converter • Worldwide standard IEC input • 85-264VAC universal input voltage **RAC05-K/C14** ee ~~—_~~ Description **5 Watt** The RAC05-K/C14 is a unique design that combines a mains filter and isolated power supply in Darran’ the same case as a mains input filter alone, at a cost lower than many mains filters. It fits into a **Single** standard IEC “kettle connector” mounting hole, so installation time is only a few seconds. The touchable output spade terminals are safe extra-low voltage (SELV) available in 3.3V, 5V, 12V, 15V and 24V DC **Output** output voltages and are protected against short circuits, overload and overvoltage. The metal case offers secure fixing and enhances thermal dissipation allowing an operating temperature from -40°C to +70°C. The RAC05-K/C14 is ideal for powering single board computers such as the Raspberry Pi (including touchscreen), Arduino, BBC Micro:bit, etc. aSSESc—J 

## Selection Guide 

|Part|Input|Output|Output|Efficiency|Max. Capacitive|
|---|---|---|---|---|---|
|Number|Voltage Range|Voltage Range<br>Voltage|Current|typ(1)|Load(2)|
||[VAC]|[VDC]|[mA]|[%]|[µF]|
|RAC05-3.3SK/C14|RAC05-3.3SK/C14<br>85-264|3.3|1510|76|6000|
|RAC05-05SK/C14|85-264|5|1000|80|6000|
|RAC05-12SK/C14|85-264|12|420|81|1500|
|RAC05-15SK/C14|85-264|15|333|81|1000|
|RAC05-24SK/C14|85-264|24|210|84|330|
|Notes:<br>Note1: Efficiency is tested at nominal input and full load at +25°C ambient<br>~~i~~||||||



Note2: Max Cap Load is tested at nominal input and full resisitive load 

**E224736** 

UL/IEC/EN62368-1 pending IEC60950-1 pending FCC Part 15 certified ANSI C63.4 certified IEC/EN61204-3 compliant EN55032 compliant EN55024 compliant CB Report 

## Model Numbering 

## RAC05-__ SK/C14 

nom. Output Power Output Voltage 

C14 input plug (male) **S** ingle 

REV.:  0/2018 

PA-1 

**www.recom-power.com** 

**AC/DC Converter** 

~~|~~ Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) 

**==> picture [526 x 705] intentionally omitted <==**

**----- Start of picture text -----**<br>
RECUM RAC05-K/C14<br>AC/DC Converter Series<br>| Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated)<br>BASIC CHARACTERISTICS<br>cn<br>a Parameter GC Condition Min. Typ. Max.<br>GG Internal Input Filter Pi type<br>nom. Vin= 230VAC 85VAC 230VAC 264VAC<br>Input Voltage Range  [(3,4)]<br>120VDC 370VDC<br>a<br>115VAC 250mA<br>Input Current<br>230VAC 100mA<br>a<br>115VAC 15A<br>Inrush Current cold start at 25°C<br>230VAC 30A<br>ee<br>No Load Power Consumption 75mW<br>0.5W 0.3W<br>ErP Standby Mode Conformity<br>Input Power=  1.0W 0.7W<br>(Output Load Capability)<br>2.0W 1.5W<br>aee Input Frequency Range ee AC Input 47Hz ee 63Hz<br>Minimum Load 0%<br>a<br>115VAC 0.6<br>Power Factor<br>230VAC 0.45<br>a<br>ee Start-up Time 20ms<br>Rise Time 8ms<br>ee<br>115VAC 12ms<br>Hold-up Time<br>230VAC 60ms<br>a<br>en Internal Operating Frequency 130kHz<br>3.3Vout, 5Vout 60mVp-p<br>Output Ripple and Noise 20MHz BW<br>others 1% of Vout<br>a<br>Notes:<br>      Note3:  The products were submitted for safety files at AC-Input operation<br>      Note4:  Refer to line derating graph on page PA-4<br>Efficiency vs. Load<br>RAC05-3.3SK/C14 RAC05-05SK/C14<br>100 100<br>90 90<br>PPP [rrr]<br>80 | | | | | |] | | ry ) 80 Ereee pt<br>70 70<br>ee “er | | | | | TT<br>60 60<br>50 PEPER 3.3Vout 50 ESE 5Vout<br>40 40<br>EEE, eee RERE ERE<br>30 30<br>20 PERSE] 115VAC 20 FESR 115VAC<br>230VAC 230VAC<br>10 10<br>pe<br>0 0<br>0 10 20 30 40 50 60 70 80 90 100 0 10 20 30 40 50 60 70 80 90 100<br>Output Load [%] Output Load [%]<br>Efficiency [%] Efficiency [%]<br>**----- End of picture text -----**<br>


continued on next page 

REV.:  0/2018 

PA-2 

**www.recom-power.com** 

**AC/DC Converter** 

**Series** 

## **RAC05-K/C14** 

**==> picture [525 x 16] intentionally omitted <==**

**----- Start of picture text -----**<br>
a Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated)<br>**----- End of picture text -----**<br>


**==> picture [495 x 466] intentionally omitted <==**

**----- Start of picture text -----**<br>
Efficiency vs. Load<br>RAC05-12SK/C14 RAC05-15SK/C14<br>100 100<br>A<br>90 90<br>80 a 80<br>70 Oi 70 co<br>60 60<br>50 Pore 12Vout eee 50 eee 15Vout eee<br>40 ee 40<br>30 a 30<br>20 PEPE 115VAC 20 Perr 115VAC<br>230VAC 230VAC<br>10 10<br>0 PEPSOT rrr 0 CEToe<br>0 10 20 30 40 50 60 70 80 90 100 0 10 20 30 40 50 60 70 80 90 100<br>Output Load [%] Output Load [%]<br>RAC05-24SK/C14<br>100<br>90 Pr<br>A<br>80<br>70 ery PPT<br>60<br>50 (a 24Vout<br>40 PCE cee<br>30 POPP<br>20 aa 115VAC<br>10 Pr 230VAC<br>EET<br>0<br>0 10 20 30 40 50 60 70 80 90 100<br>Output Load [%]<br>Efficiency [%] Efficiency [%]<br>Efficiency [%]<br>**----- End of picture text -----**<br>


|REGULATIONS|REGULATIONS|REGULATIONS|
|---|---|---|
|Parameter|Condition|Value|
|Output Accuracy||±2.0% typ.|
|Line Regulation|low line to high line, full load|±0.5% typ.|
|Load Regulation|10% to 100% load|±1.0% typ.|
|Transient Response|25% load step change<br>recoverytime|4.0% max.<br>500µs typ.|



REV.:  0/2018 

PA-3 

**www.recom-power.com** 

**RAC05-K/C14 Series** 

**AC/DC Converter** 

|PROTECTIONS<br>~~co~~|PROTECTIONS<br>~~co~~|PROTECTIONS<br>~~co~~|PROTECTIONS<br>~~co~~|
|---|---|---|---|
|Parameter<br>~~co~~<br>~~a~~|Type<br>~~co~~||Value<br>~~co~~|
|Input Fuse(5)<br>~~a~~<br>~~a~~|internal||T1A, slow blow|
|Short Circuit Protection(SCP)<br>~~a~~<br>~~GO~~|below 100mW<br>~~GO~~||Hiccup, automatic restart<br>~~GO~~|
|Over Voltage Protection(OVP)<br>~~GO~~<br>~~a~~|~~GO~~||125% - 195%, Latch-off<br>~~GO~~|
|Over Voltage Category<br>~~a~~<br>~~a~~|||OVCII|
|Over Current Protection(OCP)<br>~~a~~<br>~~a~~|||125% - 195%, Hiccupauto recovery|
|Class of Equipment<br>~~a~~<br>~~a~~|||ClassI|
|Isolation Voltage(6)<br>~~a~~<br>~~a~~|I/P to O/P;  I/P to Case(GND)|rated for 1 minute|3kVAC|
|Isolation Resistance<br>~~OD~~|~~OD~~||1GWmin.<br>~~OD~~|
|Isolation Capacitance<br>~~OD~~<br>~~a~~|~~OD~~||100pF max.<br>~~OD~~|
|Insulation Grade<br>~~a~~<br>~~OG~~|~~OG~~||reinforced<br>~~OG~~|
|Leakage Current<br>~~OG~~<br>~~a~~|~~OG~~||0.25mA max.<br>~~OG~~|
|Notes:<br>Note5: Refer to local safety regulations if input over-current protection is also required<br>Note6: For repeat Hi-Pot testing, reduce the time and/or the test voltage||||



ENVIRONMENTAL ~~cc~~ Parameter Condition Value ~~GG~~ full load -25°C to +60°C Operating Temperature Range @ natural convection 0.1m/s ~~a~~ refer to derating graph -25°C to +70°C ~~eG~~ Maximum Case Temperature +90°C ~~a~~ Temperature Coefficient ±0.05%/K ~~GG~~ Operating Altitude 3000m ~~Ge~~ Operating Humidity non-condensing % - % RH max. ~~Ge~~ Pollution Degree PD2 ~~eG~~ Vibration 10-500Hz, 2G 10min./ 1 cycle, period o 60min. each along X,Y and Z axes +25°C 450 x 10[3] hours MTBF according to MIL-HDBK-217F, G.B. ~~a~~ +50°C 250 x 10[3] hours ~~a~~ Design Lifetime 136 x 10[3] hours 

Derating Graph (@ Chamber and natural convection 0.1m/s) 

## Line Derating 

**==> picture [481 x 189] intentionally omitted <==**

**----- Start of picture text -----**<br>
100 100<br>90 90<br>80 See eeeee te 80 cee eeeoe<br>70 70<br>| | | | | | Tt NT | [| | | | | | |<br>60 60<br>| | | | | | | TT | {| | | | PT<br>50 50<br>| | | | | dT rT | TY Ft | | | PT<br>40 40<br>| | | | | | TT | | | | | | TT<br>30 30<br>| | | | | | dT | TT | {| | | | PT<br>20 20<br>P| | | | | hE | tt | {| | | | PT<br>10 10<br>| | | | | hd] | | Tt | t | | | PT<br>0 P | tT tT TE 0 | Pt ET<br>-25 -10 0 10 20 30 40 50 60 70 80 85 90 264<br>Ambient Temperature [°C] Input Voltage [VAC]<br>Output Load [%] Output Load [%]<br>**----- End of picture text -----**<br>


REV.:  0/2018 

PA-4 

**www.recom-power.com** 

**AC/DC Converter** 

**Series** 

## **RAC05-K/C14** 

~~Dn~~ Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) SAFETY AND CERTIFICATIONS ~~a a~~ Certificate Type (Safety) Report / File Number Standard Audio/video, information and communication technology equipment - Safety requirements (CB) IEC62368-1:2014 2nd Edition ~~poD po~~ Audio/video, information and communication technology equipment - Safety requirements (LVD) EN62368-1:2014 + A11:2017 ~~po po~~ pending UL62368-1, 2nd Edition, 2014 Audio/video, information and communication technology equipment - Safety requirements CAN/CSA-C22.2 No. 62368-1-14, 2nd Ed. Information Technology Equipment, General Requirements for Safety (CB) IEC60950-1 ~~S++ «=~~ ~~**p** o po~~ RoHS2 RoHS 2011/65/EU + AM2015/863 ~~f pf~~ EMC Compliance Condition Standard / Criterion ~~a~~ Low-voltage power supplies DC output - Part 3: Electromagnetic compatibility EN IEC61204-3:2018 ~~pf~~ Electromagnetic compatibility of multimedia equipment - Emission requirements EN55032:2015, Class B Information technology equipment - Immunity characteristics - Limits and methods of measuEN55024:2010 + A1:2015 rement ~~fF~~ Electromagnetic compatibility - Requirements for household appliances, electric tools and EN55014-2:2015 ~~a~~ similar apparatus - Part 2: Immunity Limitations on the amount of electromagnetic intererence allowed from digital and electronic FCC 47 CFR Part15, Supbart B devices Air: ±8,4,2kV ~~OO~~ ESD Electrostatic Discharge Immunity Test EN61000-4-2 :2009, Criteria B Conatact: ±4, 2kV 10V/m, 80MHz-1GHz Radiated, Radio-Frequency, Electromagnetic Field Immunity Test 3V/m, 1.4GHz-2GHz EN61000-4-3:2006 +A1:2008, Cirteria A ~~ee~~ 1V/m, 2GHz-2.7GHz AC In Port: ±2kV Fast Transient and Burst Immunity ~~ee~~ EN61000-4-4:2012, Criteria B DC out Port: ±2kV ~~a~~ AC In Port (L-N): ±1kV Surge Immunity EN61000-4-5:2014+A1:2017, Criteria B DC Output Port: ±0.5kV ~~aOf~~ Immunity to Conducted Disturbances, Induced by Radio-Frequency Fields AC+DC Power Port: 10V EN61000-4-6:2014, Criteria A Power Magnetic Field Immunity 50Hz, 30A/m EN61000-4-8:2010, Criteria A Voltage Dips 20% EN61000-4-11:2004+A1:2017, Criteria C Voltage Dips 30% EN61000-4-11:2004+A1:2017, Criteria C Voltage Dips and Interuptions Voltage Dips 60% EN61000-4-11:2004+A1:2017, Criteria C Voltage Dips 100% EN61000-4-11:2004+A1:2017, Criteria B ~~po~~ Voltage Interruptions > 95% EN61000-4-11:2004+A1:2017, Criteria C ~~pf~~ Voltage Fluctuations and Flicker in Public Low-Voltage Systems <=16A per phase EN61000-3-3:2013 

|DIMENSION AND PHYSICAL CHARACTERISTICS|DIMENSION AND PHYSICAL CHARACTERISTICS|DIMENSION AND PHYSICAL CHARACTERISTICS|
|---|---|---|
|Parameter|Type|Value|
|Material|case<br>inner case<br>potting|nickel-plated steel<br>plastic (UL94 V-0)<br>silicone rubber(UL96V-0)|
|Dimension(LxWxH)||67.0 x 48.0 x 23.0mm|
|Weight||56gtyp.|
|continued on nextpage|||



REV.:  0/2018 

PA-5 

**www.recom-power.com** 

**Series** 

## **RAC05-K/C14** 

## **AC/DC Converter** 

Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) 

**==> picture [520 x 619] intentionally omitted <==**

**----- Start of picture text -----**<br>
 Dimension Drawing (mm)<br>26.8<br><qD ))) i<br>48.0<br>21.5<br>Pinning information<br>Pin # Single<br>1 VAC in (L)<br>2 Earth<br>3 VAC in (N)<br>4 +Vout<br>5 Earth<br>6 -Vout<br>FC= fixing centers<br>Tolerance:   xx.x= ±0.5mm<br>xx.xx= ±0.25mm<br>1] r<br>6.3<br>28.5<br>Ø3.40<br>5 Mounting hole dimensions<br>R7<br>6 4 29.5  [±0.5]<br>R4.1<br>Ø3.6  [-0]<br>FC 40.0<br>40.0  [±0.1]<br>—— CI<br>PACKAGING INFORMATION<br>Parameter Type Value<br>Packaging Dimension (LxWxH) cardboard box 166.0 x 123.0 x 91.0mm<br>Packaging Quantity 10pcs<br>Storage Temperature Range -40°C to +85°C<br>Storage Humidity non-condensing 95% RH max.<br>1 3<br>2<br>19.5 23.0<br>5.60 2.00<br>3.00<br>53.4<br><67.0<br>10.90<br>7.6<br>21.0<br>±0.5<br>22.0<br>**----- End of picture text -----**<br>


The product information and specifications may be subject to changes even without prior written notice.The product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use in safety-critical applications without RECOM’s explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. 

REV.:  0/2018 

PA-6 

**www.recom-power.com**