R95C-8B22-KQ

## R95C 8-Port 2-Channel Discrete IO-Link Hub Quick Start Guide 

## Features 

This guide is designed to help you set up and install the R95C 8-Port 2-Channel Discrete Bimodal IO-Link Hub. For complete information on programming, performance, troubleshooting, dimensions, and accessories, please refer to the Instruction Manual at www.bannerengineering.com. Search for p/n 233582 to view the Instruction Manual. Use of this document assumes familiarity with pertinent industry standards and practices. 

- Compact bimodal to IO-Link device converter that connects discrete inputs and sends the value to the IO-Link Master 

- • Outputs a discrete value as received from IO-Link Master Process Data Out • Enabled Delay Modes: ON/OFF Delay, ON/OFF One-shot, ON/OFF/Retriggerable One-shot, ON/OFF Pulse-stretcher and Totalizer 

- Measurement Metrics: Count, Events Per Minute (EPM), and Duration 

- • Discrete Mirroring: Discrete signals (In/Out) from all eight ports can be mirrored to any of the eight ports, Discrete Out, or the host white wire output 

- • Discrete input/output can be independently configured as NPN or PNP • Rugged overmolded design meets IP65, IP67, and IP68 

- Connects directly to a sensor or anywhere in-line for ease of use 

- • R95C IO-Link hubs are a quick, easy, and economical way to integrate non-IO-Link devices into an IO-Link system 

## Overview 

The R95C-8B22-KQ hub connects two discrete Input/Output channels to each of the eight unique ports, providing access to monitoring and configuring those ports with an IO-Link master. Host mirroring is available where a selected port input/output discrete signal can be routed to Pin 2 (male) on the PLC/Host connection. 

## IO-Link® 

IO-Link® is a point-to-point communication link between a master device and a sensor and/or light. It can be used to automatically parameterize sensors or lights and to transmit process data. For the latest IO-Link protocol and specifications, please visit www.io-link.com. 

For the latest IODD files, please refer to the Banner Engineering Corp website at: www.bannerengineering.com. 

## Resources 

For more information, see P/N 233583 _R95C-8B22-KQ IO-Link Data Reference Guide_ and P/N 233584 _R95C-8B22-KQ IODD Files_ . 

## Mechanical Installation 

Install the R95C to allow access for functional checks, maintenance, and service or replacement. Do not install the R95C in such a way to allow for intentional defeat. Fasteners must be of sufficient strength to guard against breakage. The use of permanent fasteners or locking hardware is recommended to prevent the loosening or displacement of the device. The mounting hole (4.5 mm) in the R95C accepts M4 (#8) hardware. See the figure below to help in determining the minimum screw length. 

**==> picture [77 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
MOUNTING SCREW<br>**----- End of picture text -----**<br>


**==> picture [32 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
17.0 mm<br>**----- End of picture text -----**<br>


_**CAUTION:** Do not overtighten the R95C's mounting screw during installation. Overtightening can affect the performance of the R95C._ 

## Status Indicators 

The R95C 8-Port 2-Channel Discrete Bimodal IO-Link Hub has two matching amber LED indicators, one for each channel, on both sides for each discrete device port to allow for installation needs and still provide adequate indication visibility. There is also an additional amber LED indicator on both sides of the converter, which is specific to the IO-Link communication. 

**BANNER ENGINEERING CORP.** 

**March 13, 2023** 

**R95C 8-PORT 2-CHANNEL DISCRETE IO-LINK HUB QUICK START GUIDE** 

**BANNER ENGINEERING CORP.** 

|**LED**|**Indication**|**Status**|
|---|---|---|
|Discrete Device Amber LEDs|Off|Discrete In and Out are inactive|
||Solid Amber|Discrete In or Out is active|
|IO-Link Communication Amber LED|Off|IO-Link communications are not present|
||Flashing Amber (900 ms On, 100 ms Off)|IO-Link communications are active|
|Power Indicator Green LED|Off|Power off|
||Solid Green|Power on|



## Specifications 

**Supply Voltage Construction** 18 V DC to 30 V DC at 400 mA maximum (exclusive of load) Coupling Material: Nickel-plated brass **Power Pass-Through Current** Connector Body: PVC translucent black 500 mA per port maximum **Vibration and Mechanical Shock Discrete Output Load Rating** Meets IEC 60068-2-6 requirements (Vibration: 10 Hz to 55 Hz, 0.5 mm 200 mA amplitude, 5 minutes sweep, 30 minutes dwell) Meets IEC 60068-2-27 requirements (Shock: 15G 11 ms duration, half sine **Supply Protection Circuitry** wave) Protected against reverse polarity and transient voltages **Environmental Rating Leakage Current Immunity** IP65, IP67, IP68 400 µA NEMA/UL Type 1 **Indicators Operating Conditions** Green: Power **Temperature:** –40 °C to +70 °C (–40 °F to +158 °F) Amber: IO-Link communications 90% at +70 °C maximum relative humidity (non-condensing) Amber: 2x Discrete IN/OUT status **Storage Temperature:** –40 °C to +80 °C (–40 °F to +176 °F) **Connections** (8) Integral 4-pin M12 female quick disconnect (1) Integral 4-pin M12 male quick-disconnect connector 

## **Required Overcurrent Protection** 

**WARNING:** Electrical connections must be made by qualified personnel in accordance with local and national electrical codes and regulations. Overcurrent protection is required to be provided by end product application per the supplied table. Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply. Supply wiring leads < 24 AWG shall not be spliced. 

For additional product support, go to www.bannerengineering.com. 

|**Supply Wiring (AWG)**|**Required Overcurrent Protection (A)**|**Supply Wiring (AWG)**|**Required Overcurrent Protection (A)**|
|---|---|---|---|
|20|5.0|26|1.0|
|22|3.0|28|0.8|
|**Certifications**<br>24<br>1.0<br>30<br>0.5<br>**Banner Engineering BV**<br>Park Lane, Culliganlaan 2F<br>bus 3, 1831 Diegem,<br>BELGIUM<br>**Turck Banner LTD**Blenheim<br>House, Blenheim Court, Wickford,<br>Essex SS11 8YT, Great Britain||||



## FCC Part 15 Class B 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 

- Reorient or relocate the receiving antenna. 

- Increase the separation between the equipment and receiver. 

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 

- Consult the dealer or an experienced radio/TV technician for help. 

**© Banner Engineering Corp. www.bannerengineering.com** 

**2** 

**BANNER ENGINEERING CORP** 

**R95C 8-PORT 2-CHANNEL DISCRETE IO-LINK HUB QUICK START GUIDE** 

## Industry Canada 

This device complies with CAN ICES-3 (B)/NMB-3(B). Operation is subject to the following two conditions: 1) This device may not cause harmful interference; and 2) This device must accept any interference received, including interference that may cause undesired operation. 

Cet appareil est conforme à la norme NMB-3(B). Le fonctionnement est soumis aux deux conditions suivantes : (1) ce dispositif ne peut pas occasionner d'interférences, et (2) il doit tolérer toute interférence, y compris celles susceptibles de provoquer un fonctionnement non souhaité du dispositif. 

## Banner Engineering Corp. Limited Warranty 

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. 

**THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.** 

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. **IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.** 

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. For patent information, see www.bannerengineering.com/patents. 

Document title: R95C 8-Port 2-Channel Discrete Bimodal IO-Link Hub Quick Start Guide Part number: 233581 

Revision: B Original Instructions © Banner Engineering Corp. All rights reserved. 

**==> picture [80 x 43] intentionally omitted <==**

**----- Start of picture text -----**<br>
233581<br>**----- End of picture text -----**<br>


**© Banner Engineering Corp. www.bannerengineering.com** 

**3**