R95-8M125-C1-D24P

R95 I/O Junction Block Product Manual 

## Features 

8-Port Junction Block with 16 Signals 

• Capable of handling 16 individual PNP signals into a singular point of entry • Supports 8A combined between all devices connected • Pin 2 and Pin 4 on the M12 for each individual signal • Home run cabling options include a flying lead exit in varying lengths or a short 0.3 m M23 male 19-pin quick-disconnect connector • Fully overmolded with a rugged TPU body • Immediate field feedback with LEDs for signal and power status • Wiring diagram included on body for quick problem diagnosis 

## Models 

**==> picture [500 x 181] intentionally omitted <==**

**----- Start of picture text -----**<br>
LED Models<br>Model Ports Home Run Connector Wiring<br>1 m (3.28 ft) black PVC cable<br>R95-8M125-C1-D24P<br>with flying leads<br>(8) Integral 5-pin M12 female<br>See "Wiring" on page 2<br>quick-disconnect connectors 0.3 m (0.98 ft) black PVC cable<br>R95-8M125-0.3M23-D24P with a 19-pin M23 male quick-<br>disconnect connector<br>Non-LED Models<br>Model Ports Home Run Connector Wiring<br>1 m (3.28 ft) black PVC cable<br>R95-8M125-C1-D24<br>with flying leads<br>(8) Integral 5-pin M12 female<br>See "Wiring" on page 2<br>quick-disconnect connectors 0.3 m (0.98 ft) black PVC cable<br>R95-8M125-0.3M23-D24 with a 19-pin M23 male quick-<br>disconnect connector<br>**----- End of picture text -----**<br>


## Product Overview 

Banner’s Molded Junction Blocks are designed to help customers reduce wiring and to simplify connecting multiple products. 

The 8-Port I/O Junction Block: 

- Allows up to 16 individual PNP devices connected 

- Provides 8A of power shared between all devices connected on the 18 Awg power conductors from a panel or control source 

- Includes a singular connection back to the control device or panel to manage all of these devices on 22 awg wire 

- Has non-LED options to allow for any signal type to be combined into the block 

## Mechanical Installation 

Install the R95 I/O Junction Block to allow access for functional checks, maintenance, and service or replacement. 

All mounting hardware is supplied by the user. Fasteners must be of sufficient strength to guard against breakage. Use of permanent fasteners or locking hardware is recommended to prevent the loosening or displacement of the device. The mounting hole (4.5 mm) in the R95 I/O Junction Block accepts M4 (#8) hardware. See the figure below to help in determining the minimum screw length. 

Original Instructions 03-Sep-24 

© Banner Engineering Corp. All rights reserved. 

p/n: 242038 Rev. A 

R95 I/O Junction Block Product Manual 

**==> picture [60 x 32] intentionally omitted <==**

**----- Start of picture text -----**<br>
MOUNTING SCREW<br>17.0 mm<br>**----- End of picture text -----**<br>


NOTE: The dotted line indicates the profile of the counterbore. 

CAUTION: Do not overtighten the R95 I/O Junction Block's mounting screw during installation. Overtightening can affect the performance of the R95 I/O Junction Block. 

## Wiring 

## LED Models 

**==> picture [463 x 167] intentionally omitted <==**

**----- Start of picture text -----**<br>
Flying Lead Model M23 Model<br>TNOTWO TNOTHO TNT TNT SKNOTHO SKNOTW SKNOTWIO<br>PK 17<br>ol]ety oth|] attely] WH/YE etyél stye|] oth|] atél] 9<br>[TT RD [Tt 2<br>YE/BN 13<br>ee esee| WH/GYBK aaee| 10 11<br>aaa CGeG || GY/BNBU COMVT aaGOaGQ|| 186 1<br>GN/YE GND 12<br>BN PWR 19<br>eeeeaeeaeeGO reQO | BN/GNWH/GNGY Se ee a sOee QO | 148 3<br>es a YE ee 16<br>er ee ee | RD/BU | 4<br>/——} GN I 5<br>GY/PK 7<br>Tt WH Tt 15<br>el]oo ©scot |] aeScot Scrol] el]a Scoan fea4<br>J8 J7 J6 J5 J8 J7 J6 J5<br>J4 J3 J2 J1 J4 J3 J2 J1<br>**----- End of picture text -----**<br>


Non-LED Models 

**==> picture [477 x 168] intentionally omitted <==**

**----- Start of picture text -----**<br>
Flying Lead Model M23 Model<br>PK 17<br>WH/YE 9<br>RD 2<br>a || YE/BN || 13<br>ee [a] re ee ee WH/GYBK ee[| [|a 10 11<br>es a OO OG GY/BNVT a a| 18 1<br>a a BU COM a 6<br>GN/YE GND 12<br>asSS ee eeeGS BN PWR Pptes ee 19<br>aaaa BN/GNWH/GNGY ee 148 3<br>ee | YE aa 16<br>a RD/BU a 4<br>ee GN ee 5<br>|| GY/PK || 7<br>WH 15<br>J8 J7 J6 J5 J8 J7 J6 J5<br>1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5<br>1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5<br>J4 J3 J2 J1 J4 J3 J2 J1<br>**----- End of picture text -----**<br>


## Specifications 

Voltage Input Range 30 V DC 

Maximum Current 8A total 2A max. per connector 

page 2 of 6 

03-Sep-24 

© Banner Engineering Corp. All rights reserved. 

R95 I/O Junction Block Product Manual 

Construction 

Coupling Material: Nickel-plated brass Connector Body: TPU black 

## Operating Conditions 

–40 °C to +70 °C (–40 °F to +158 °F) 

90% at +70 °C maximum relative humidity (non-condensing) Storage Temperature: –40 °C to +80 °C (–40 °F to +176 °F) 

## Dimensions 

All measurements are listed in millimeters [inches], unless noted otherwise. The measurements provided are subject to change. 

**==> picture [200 x 476] intentionally omitted <==**

**----- Start of picture text -----**<br>
Flying Lead Model<br>8X M12 x 1<br>M23 Model<br>M23 x 1.5 Thread<br>8X M12 x 1<br>**----- End of picture text -----**<br>


**==> picture [54 x 34] intentionally omitted <==**

03-Sep-24 

page 3 of 6 

© Banner Engineering Corp. All rights reserved. 

R95 I/O Junction Block Product Manual 

## Accessories 

## Cordsets 

**==> picture [500 x 530] intentionally omitted <==**

**----- Start of picture text -----**<br>
4-pin Double-Ended M12 Female to M12 Male Cordsets<br>Model Length Dimensions (mm) Pinouts<br>BC-M12F4-M12M4-22-1 1 m (3.28 ft) Female<br>40 Typ.<br>[1.58"] 2<br>BC-M12F4-M12M4-22-2 2 m (6.56 ft) 1<br>BC-M12F4-M12M4-22-5 5 m (16.4 ft) M12 x 1 4 3 1 = Brown<br>BC-M12F4-M12M4-22-8 8 m (26.25 ft) ø 14.5 [0.57"] 2 = White<br>44 Typ. Male 3 = Blue<br>BC-M12F4-M12M4-22-10 10 m (30.81 ft) [1.73"] 4 = Black<br>1<br>2<br>BC-M12F4-M12M4-22-15 15 m (49.2 ft) ø 14.5 [0.57"]M12 x 1 4<br>3<br>5-pin Double-Ended M12 Female to M12 Male Cordsets<br>Model Length Dimensions (mm) Pinouts<br>BC-M12F5-M12M5-22-0.16M 0.16 m (0.52 ft) Female<br>2<br>BC-M12F5-M12M5-22-1 1 m (3.28 ft) 40 Typ.[1.58"] 1<br>BC-M12F5-M12M5-22-2 2 m (6.56 ft) 3<br>BC-M12F5-M12M5-22-5 5 m (16.4 ft) M12 x 1 4 5 1 = Brown<br>ø 14.5 [0.57"] 2 = White<br>BC-M12F5-M12M5-22-8 8 m (26.25 ft) 44 Typ. Male 3 = Blue 4 = Black<br>BC-M12F5-M12M5-22-10 10 m (30.81 ft) [1.73"] 1 5 = Gray<br>M12 x 1 2<br>BC-M12F5-M12M5-22-15 15 m (49.2 ft) ø 14.5 [0.57"] 4<br>3 5<br>19-pin Single-Ended M23 Female Cordsets<br>Model Length Dimensions (mm) Pinout (Female)<br>BC-M23F19-1822-1 1 m (3.28 ft)<br>BC-M23F19-1822-2 2 m (6.56 ft) 7 mm<br>75 mm<br>BC-M23F19-1822-5 5 m (16.4 ft)<br>70 mm<br>1 = Purple<br>BC-M23F19-1822-10 10 m (32.8 ft) Typ 2 = Red<br>3 = Gray<br>BC-M23F19-1822-15 15 m (49.2 ft) ø26 4 = Red/Blue5 = Green<br>6 = Blue (18 AWG)<br>BC-M23F19-1822-20 20 m (65.6 ft) M23 x 1 2 1 1218 11 7 = Gray/Pink8 = White/Green<br>3 13 10 9 = White/Yellow<br>BC-M23F19A-1822-2BC-M23F19A-1822-5 2 m (6.56 ft)5 m (16.4 ft) 75 mm7 mm 4 145 15196 71617 8 9 10 = White/Gray11 = Black12 = Green/Yellow (18 AWG)13 = Yellow/Brown<br>14 = Brown/Green<br>67 mm 15 = White<br>Typ 16 = Yellow<br>17 = Pink<br>18 = Gray/Brown<br>BC-M23F19A-1822-10 10 m (32.8 ft) 50 mm 19 = Brown (18 AWG)<br>Typ<br>M23 x 1<br>ø26<br>**----- End of picture text -----**<br>


page 4 of 6 

03-Sep-24 

© Banner Engineering Corp. All rights reserved. 

R95 I/O Junction Block Product Manual 

**==> picture [500 x 418] intentionally omitted <==**

**----- Start of picture text -----**<br>
19-pin Double-Ended M23 Female to M23 Male Cordsets<br>Model Length Dimensions (mm) Pinout (Female)  Pinout (Male)<br>BC-M23F19-<br>M23M19-1822-1BC-M23F19-M23M19-1822-2BC-M23F19-M23M19-1822-5 1 m (3.28 ft)2 m (6.56 ft)5 m (16.4 ft) 70 mmTyp ø26 34 214135 11519126 1871617118109 910811171671812196 151 131452 43<br>M23 x 1<br>BC-M23F19-M23M19-1822-10 10 m (32.8 ft) 70 mmTyp 1 = Purple2 = Red3 = Gray 11 = Black12 = Green/Yellow (18 AWG)13 = Yellow/Brown<br>4 = Red/Blue<br>BC-M23F19- ø26 5 = Green 14 = Brown/Green<br>M23M19-1822-15 15 m (49.2 ft) M23 x 1 6 = Blue (18 AWG)7 = Gray/Pink 15 = White16 = Yellow17 = Pink<br>8 = White/Green<br>BC-M23F19-M23M19-1822-20 20 m (65.6 ft) 9 = White/Yellow10 = White/Gray 18 = Gray/Brown19 = Brown (18 AWG)<br>4-Pin M12 Male to 5-Pin M12 Female Splitter Cordset<br> Model Branches (Female) Wiring<br>N/C<br>S15YA4-M124-M124-0.2M L1, L2<br>2 × 0.2 m (7.9 in)<br>N/C<br>L2<br>M12 x 1<br>M12 x 1<br>2X<br>2X<br>L1<br>**----- End of picture text -----**<br>


**==> picture [500 x 248] intentionally omitted <==**

**----- Start of picture text -----**<br>
4-Pin M12 Male to 5-Pin M12 Female Splitter Cordset<br> Model Branches (Female) Wiring<br>N/C<br>S15YA24-M124-M124-0.2M L1, L2<br>2 × 0.2 m (7.9 in)<br>N/C<br>L2<br>M12 x 1<br>M12 x 1<br>2X<br>2X<br>L1<br>**----- End of picture text -----**<br>


03-Sep-24 

page 5 of 6 

© Banner Engineering Corp. All rights reserved. 

R95 I/O Junction Block Product Manual 

## Other Accessories 

ACC-CAP M12-10 

- 10 Caps 

- Seal and protect exposed, unterminated cascade quick-disconnect connectors 

## Maintenance and Service 

Do not use alcohol-based cleaning agents. The R95 I/O Junction Block is maintenance-free. 

## Banner Engineering Corp Limited Warranty 

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. 

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. 

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. 

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. 

For patent information, see www.bannerengineering.com/patents. 

page 6 of 6 

03-Sep-24 

© Banner Engineering Corp. All rights reserved.