R533I310050P0K

## Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions **R53 (Miniature), THB Grade IIIB, Class X2, 310 VAC, 110°C (Automotive Grade)** 

## **Overview** 

## **Applications** 

The R53 series is constructed of metallized polypropylene film encapsulated with self-extinguishing resin in a box of material that meets the requirements of UL 94 V–0. The R53 series is ideal for harsh environmental conditions and meets the demanding Automotive Electronics Council's AEC–Q200 qualification requirements. 

For worldwide use in electromagnetic interference (EMI) suppression in across-the-line applications that require X2 safety classification. Intended for use in situations in which capacitor failure would not result in exposure to electric shock. Typical applications include connection in series with the mains, capacitive power supplies and energy meters, with special emphasis in automotive applications for severe ambient conditions such as On Board Chargers. 

## **Benefits** 

- Approvals: ENEC, UL, cUL, CQC 

- X2 CLASS (IEC 60384-14) 

- THB Grade IIIB: 85°C, 85% RH, 1,000 hours at 310 VAC acc. to IEC 60384-14 

- THB Grade IIIB: 85°C, 85% RH, 1,000 hours at 560 VDC acc. to IEC 60384-14 

- Low Halogen Content according to JS709C 

- Rated voltage: 310 VAC 50/60 Hz 

- Recommended DC Voltage ≤ 630 VDC 

- Capacitance range: 0.1 – 22 µF 

- Lead spacing: 15.0 – 37.5 mm 

- Capacitance tolerance: ±20%, ±10% 

- Climatic category 40/110/56, IEC 60068-1 

- Tape & Reel in accordance with IEC 60286-2 

- RoHS compliant and lead-free terminations 

- Operating temperature range of −40°C to +110°C 

- 100% screening factory test at 1,900 VDC 

- Self healing properties 

- Automotive (AEC-Q200) grade 

## **Part Number System** 

|**R53**|**3**|**I**|**3470**|**00**|**P0**|**M**|
|---|---|---|---|---|---|---|
|Series|Rated Voltage<br>(VAC)|Lead Spacing<br>(mm)|Capacitance<br>Code(pF)|Packaging|Internal Use|Capacitance<br>Tolerance|
|X2, Metallized<br>Polypropylene|3 = 310|I = 15.0<br>N = 22.5<br>R = 27.5<br>W = 37.5|The last three<br>digits represent<br>significant figures.<br>The first digit<br>specifies number<br>of zeros to be<br>added.|See Ordering<br>Options Table|P0<br>P1<br>P2<br>P3|K = ±10%<br>M = ±20%|



**Built Into Tomorrow** ~~al~~ 

© KEMET Electronics Corporation • One East Broward Boulevard F3124_R53_X2_310_110C_MIN • 8/15/2023 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

1 

Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R53 (Miniature), THB Grade IIIB, Class X2, 310 VAC, 110°C (Automotive Grade) 

## **Ordering Options Table** 

**==> picture [398 x 598] intentionally omitted <==**

**----- Start of picture text -----**<br>
Lead Spacing Lead and<br>Lead Length<br>Nominal  Type of Leads and Packaging Packaging<br>(mm)<br>(mm) Code<br>Standard Lead and Packaging Options<br>Bulk (Bag) – Short Leads 4 +2/-0 00<br>Pizza Pack – Short Leads 4 +2/-0 BB<br>Ammo Pack H0 = 18.5 ±0.5 DQ [1]<br>Other Lead and Packaging Options<br>Tape & Reel (Large Reel) H0 = 18.5 ±0.5 CK<br>15  Tape & Reel (Standard Reel) H0 = 18.5 ±0.5 GY [1]<br>Bulk (Bag) [2]  – Short Leads 2.7 +0.5/−0 JA<br>22.5<br>Bulk (Bag) [2]  – Short Leads 3.5 +0.5/−0 JB<br>Bulk (Bag) [2]  – Short Leads 4.0 +0.5/−0 JE<br>Bulk (Bag) [2]  – Short Leads 3.2 +0.3/−0.2 JH<br>Bulk (Bag) – Long Leads 18 ±1 JM<br>Bulk (Bag) – Long Leads 30 +5/−0 40<br>Bulk (Bag) – Long Leads 25 +2/−1 50<br>Standard Lead and Packaging Options<br>Bulk (Tray) – Short Leads 4 +2/−0 00<br>Pizza Pack – Short Leads 4 +2/-0 BB<br>Tape & Reel (Large Reel) H0= 18.5 ±0.5 CK [1]<br>Other Lead and Packaging Options<br>Bulk (Tray) – Short Leads 2.7 +0.5/−0 JA<br>27.5 Bulk (Tray) – Short Leads 3.5 +0.5/−0 JB<br>Bulk (Tray) – Short Leads 4.0 +0.5/−0 JE<br>Bulk (Tray) – Short Leads 3.2 +0.3/−0.2 JH<br>Bulk (Tray) – Long Leads 18 ±1 JM<br>Bulk (Tray) – Long Leads 30 +5/−0 40<br>Bulk (Tray) – Long Leads 25 +2/−1 50<br>Standard Lead and Packaging Options<br>Pizza Pack – Short Leads 4 +2/-0 00<br>Other Lead and Packaging Options<br>Pizza Pack – Short Leads 2.7 +0.5/−0 JA<br>Pizza Pack – Short Leads 3.5 +0.5/−0 JB<br>37.5<br>Pizza Pack – Short Leads 4.0 +0.5/−0 JE<br>Pizza Pack – Short Leads 3.2 +0.3/−0.2 JH<br>Pizza Pack – Long Leads 18 ±1 JM<br>Pizza Pack – Long Leads 30 +5/−0 40<br>Pizza Pack – Long Leads 25 +2/−1 50<br>**----- End of picture text -----**<br>


_1 Not for all sizes, see "Packaging Quantities" table._ 

_2 For lead spacing 22.5 case sizes ≥ 8.5*17*26.5 the parts are packed in a Pizza box 335*320*34 mm_ 

© KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

F3124_R53_X2_310_110C_MIN • 8/15/2023 

2 

Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R53 (Miniature), THB Grade IIIB, Class X2, 310 VAC, 110°C (Automotive Grade) 

## **Dimensions – Millimeters** 

**==> picture [180 x 156] intentionally omitted <==**

**----- Start of picture text -----**<br>
FRONT VIEW SIDE VIEW<br>L T<br>H<br>S<br>LL<br>F<br>**----- End of picture text -----**<br>


**==> picture [398 x 39] intentionally omitted <==**

**----- Start of picture text -----**<br>
S T H L F<br>Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance<br>**----- End of picture text -----**<br>


|**S**|**S**|**T**|**T**|**H**|**H**|**L**|**L**|**F**|**F**|
|---|---|---|---|---|---|---|---|---|---|
|Nominal|Tolerance|Nominal|Tolerance|Nominal|Tolerance|Nominal|Tolerance|Nominal|Tolerance|
|||||||||||
|15.0<br>15.0<br>15.0<br>15.0<br>15.0<br>15.0<br>15.0<br>15.0|±0.4<br>±0.4<br>±0.4<br>±0.4<br>±0.4<br>±0.4<br>±0.4<br>±0.4|5.0<br>6.0<br>7.5<br>7.5<br>8.5<br>9.0<br>10.0<br>11.0|+0.3/−0.5<br>+0.3/−0.5<br>+0.3/−0.5<br>+0.3/−0.5<br>+0.3/−0.5<br>+0.3/−0.5<br>+0.3/−0.5<br>+0.3/−0.5|11.0<br>12.0<br>13.5<br>18.5<br>14.5<br>12.5<br>16.0<br>19.0|+0.3/−0.5<br>+0.3/−0.5<br>+0.3/−0.5<br>+0.3/−0.5<br>+0.3/−0.5<br>+0.3/−0.5<br>+0.3/−0.5<br>+0.3/−0.5|18.0<br>18.0<br>18.0<br>18.0<br>18.0<br>18.0<br>18.0<br>18.0|+0.5/−0.5<br>+0.5/−0.5<br>+0.5/−0.5<br>+0.5/−0.5<br>+0.5/−0.5<br>+0.5/−0.5<br>+0.5/−0.5<br>+0.5/−0.5|0.6<br>0.6<br>0.6<br>0.8<br>0.6<br>0.6<br>0.8<br>0.8|±0.05<br>±0.05<br>±0.05<br>±0.05<br>±0.05<br>±0.05<br>±0.05<br>±0.05|
|22.5<br>22.5<br>22.5<br>22.5<br>22.5|±0.4<br>±0.4<br>±0.4<br>±0.4<br>±0.4|7.0<br>8.5<br>10.0<br>11.0<br>13.0|+0.3/−0.5<br>+0.3/−0.5<br>+0.3/−0.5<br>+0.3/−0.5<br>+0.3/−0.5|16.0<br>17.0<br>18.5<br>20.0<br>22.0|+0.3/−0.5<br>+0.3/−0.5<br>+0.3/−0.5<br>+0.3/−0.5<br>+0.3/−0.5|26.5<br>26.5<br>26.5<br>26.5<br>26.5|+0.5/−0.5<br>+0.5/−0.5<br>+0.5/−0.5<br>+0.5/−0.5<br>+0.5/−0.5|0.8<br>0.8<br>0.8<br>0.8<br>0.8|±0.05<br>±0.05<br>±0.05<br>±0.05<br>±0.05|
|27.5<br>27.5<br>27.5<br>27.5<br>27.5|±0.4<br>±0.4<br>±0.4<br>±0.4<br>±0.4|11.0<br>13.0<br>14.0<br>16.0<br>22.0|+0.3/−0.7<br>+0.3/−0.7<br>+0.3/−0.7<br>+0.3/−0.7<br>+0.3/−0.7|20.0<br>22.0<br>28.0<br>30.0<br>37.0|+0.3/−0.7<br>+0.3/−0.7<br>+0.3/−0.7<br>+0.3/−0.7<br>+0.3/−0.7|32.0<br>32.0<br>32.0<br>32.0<br>32.0|+0.5/−0.7<br>+0.5/−0.7<br>+0.5/−0.7<br>+0.5/−0.7<br>+0.5/−0.7|0.8<br>0.8<br>0.8<br>0.8<br>0.8|±0.05<br>±0.05<br>±0.05<br>±0.05<br>±0.05|
|37.5<br>37.5<br>37.5|±0.4<br>±0.4<br>±0.4|20.0<br>24.0<br>30.0|+0.3/−0.7<br>+0.3/−0.7<br>+0.3/−0.7|40.0<br>44.0<br>45.0|+0.3/−0.7<br>+0.3/−0.7<br>+0.3/−0.7|42.0<br>42.0<br>42.0|+0.5/−0.7<br>+0.5/−0.7<br>+0.5/−0.7|1.0<br>1.0<br>1.0|±0.05<br>±0.05<br>±0.05|
|**Note: See Ordering Options Table for lead length (LL/H0) options.**||||||||||



© KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

F3124_R53_X2_310_110C_MIN • 8/15/2023 

3 

Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R53 (Miniature), THB Grade IIIB, Class X2, 310 VAC, 110°C (Automotive Grade) 

## **Performance Characteristics** 

|Dielectric|Polypropylene flm|Polypropylene flm|Polypropylene flm|Polypropylene flm|
|---|---|---|---|---|
|Plates|Metal layer deposited by evaporation under vacuum||||
|Winding|Non-inductive type||||
|Leads|Tinned wire||||
|Protection|Plastic case, thermosetting resin flled. Box material is solvent resistant and fame retardant according to UL94.||||
|Related Documents|IEC 60384-14, EN 60384-14||||
|Rated Voltage VR|310 VAC (50/60 Hz)||||
|Recommended DC Voltage|≤ 630 VDC||||
|Capacitance Range|0.1 –22 µF||||
|Capacitance Values|E6 series (IEC 60063) measured at 1 kHz and +20 ±1°C||||
|Capacitance Tolerance|±10%, ±20%||||
|Temperature Range|−40°C to +110°C||||
|Climatic Category|40/110/56  IEC 60068-1||||
|Storage Conditions|Storage time: ≤ 24 months from the date marked on the label package||||
||Average relative humidity per year ≤ 70%||||
||RH ≤ 85% for 30 days randomly distributed throughout the year||||
||Dew is absent||||
||Temperature: −40 to 80°C (see "Maximum Humidity in Storage Conditions" graph below)||||
|Approvals|ENEC, UL, cUL, CQC||||
|Dissipation Factor (tanδ) at 1 kHz|C ≤ 0.1 µF||C > 0.1µF||
||0.3%||0.2%||
|Test Voltage Between Terminals|The 100% screening factory test is carried out at 1,900 VDC.<br>The voltage level is selected to meet the requirements in applicable equipment standards.<br>All electrical characteristics are checked after the test. This test cannot be repeated, as there is a risk of<br>damaging the capacitor. KEMET is not liable in such cases for any failures.||||
|Insulation Resistance|Measured at +25°C ±5°C, according to IEC 60384–2||||
||Minimum Values Between Terminals||||
||Voltage Charge|Voltage Charge Time|C ≤ 0.33 μF|C > 0.33 μF|
||100 VDC|1 minute|≥ 1 • 105MΩ<br>( ≥ 5•105MΩ )*|≥ 30,000 MΩ • µF<br>( ≥ 150,000 MΩ•µF )*|



_* Typical value_ 

© KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

F3124_R53_X2_310_110C_MIN • 8/15/2023 

4 

Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R53 (Miniature), THB Grade IIIB, Class X2, 310 VAC, 110°C (Automotive Grade) 

## **Performance Characteristics cont.** 

**==> picture [241 x 300] intentionally omitted <==**

**----- Start of picture text -----**<br>
Maximum Humidity in Storage Condition<br>100<br>90<br>80<br>70<br>60<br>50<br>40<br>30 Days<br>30<br>Annual Average<br>20<br>10<br>0<br>−40 −20 0 20 40 60 80<br>Temperature (°C)<br>120% Maximum Irms vs. Th<br>100%<br>80%<br>60%<br>40%<br>20%<br>0%<br>40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115<br>Temperature Th(°C)<br>Relative Humidity (%)<br>rms<br>Maximum I<br>**----- End of picture text -----**<br>


**==> picture [242 x 139] intentionally omitted <==**

**----- Start of picture text -----**<br>
Maximum Overtemperature ∆Tlim vs Th<br>25<br>20<br>15<br>10<br>5<br>0<br>40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115<br>Temperature Th(°C)<br>(°C)<br>lim<br>∆T<br>**----- End of picture text -----**<br>


_Th is the maximum ambient temperature surrounding the capacitor or hottest contact point (e.g. tracks), whichever is higher, in the worst operation conditions in °C._ 

## **Qualification** 

Automotive Grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details regarding test methods and conditions are referenced in document AEC-Q200, Stress Test Qualification for Passive Components. For additional information regarding the Automotive Electronics Council and AEC-Q200, please visit the website at www.aecouncil.com. 

© KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

F3124_R53_X2_310_110C_MIN • 8/15/2023 

5 

Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R53 (Miniature), THB Grade IIIB, Class X2, 310 VAC, 110°C (Automotive Grade) 

## **Impedance Graph** 

**==> picture [253 x 177] intentionally omitted <==**

**----- Start of picture text -----**<br>
100<br>10<br>1 470nF, p. 15<br>1.0 µF, p. 22.5<br>4.7µF,  p. 27.5<br>0.1 15µF, p. 37.5<br>0.01<br>0.1 1 10 100<br>Frequency (MHz)<br>Z (Ohm)<br>**----- End of picture text -----**<br>


## **Maximum Voltage (Vrms) Versus Frequency (Sinusoidal Waveform/Th ≤ 80°C)** 

**==> picture [601 x 433] intentionally omitted <==**

**----- Start of picture text -----**<br>
Lead Spacing 15 mm<br>Lead Spacing 22.5 mm<br>1,000 1,000<br>100 100<br>0.47  µF<br>10 0.1   µF         10 1     µF<br>0.33  µF         1.5   µF<br>0.47  µF         2.2   µF<br>0.68  µF<br>0.82  µF<br>1 1<br>0.1 1.0 10.0 100.0 0.1 1.0 10.0 100.0<br>Frequency (kHz) Frequency (kHz)<br>Lead Spacing 27.5 mm Lead Spacing 37.5 mm<br>1,000 1,000<br>100 100<br>10 2.2   µF         10<br>3.3   µF<br>4.7   µF<br>6.8   µF<br>10    µF<br>15    µF<br>22   µF<br>1 1<br>0.1 1.0 10.0 100.0 0.1 1.0 10.0 100.0<br>Frequency (kHz) Frequency (kHz)<br>)  )<br>rms rms<br>Voltage (V Voltage (V<br>)  )<br>rms rms<br>Voltage (V Voltage (V<br>**----- End of picture text -----**<br>


F3124_R53_X2_310_110C_MIN • 8/15/2023 6 

© KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R53 (Miniature), THB Grade IIIB, Class X2, 310 VAC, 110°C (Automotive Grade) 

## **Maximum Current (Irms) Versus Frequency (Sinusoidal Waveform/Th ≤ 80°C)** 

**==> picture [680 x 536] intentionally omitted <==**

**----- Start of picture text -----**<br>
Lead Spacing 15 mm Lead Spacing 22.5 mm<br>10 10<br>1 1<br>0.47  µF<br>1     µF<br>1.5   µF<br>2.2   µF<br>0.1   µF<br>0.1 0.33  µF         0.1<br>0.47  µF<br>0.68  µF<br>0.82  µF<br>0.01 0.01<br>0.1 1.0 10.0 100.0 0.1 1.0 10.0 100.0<br>Frequency (kHz) Frequency (kHz)<br>Lead Spacing 27.5 mm Lead Spacing 37.5 mm<br>10 100<br>10<br>1<br>2.2   µF<br>3.3   µF         1<br>4.7   µF<br>6.8   µF<br>0.1<br>10    µF<br>0.1 15    µF<br>22   µF<br>0.01 0.01<br>0.1 1.0 10.0 100.0 0.1 1.0 10.0 100.0<br>Frequency (kHz) Frequency (kHz)<br>)rms )rms<br>Current (A Current (A<br>)rms )rms<br>Current (A Current (A<br>**----- End of picture text -----**<br>


© KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

F3124_R53_X2_310_110C_MIN • 8/15/2023 

7 

Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R53 (Miniature), THB Grade IIIB, Class X2, 310 VAC, 110°C (Automotive Grade) 

## **Environmental Test Data** 

|**Test**|**IEC Publication**|**Procedure**|
|---|---|---|
|Endurance|IEC 60384-14|1.25 x VRVAC 50 Hz, once every hour increase to 1,000 VAC for 0.1<br>second,1,000 hours at upper rated temperature|
|Endurance|IEC 60384-14|1.25 x 630 VDC, 1,000 hours at upper rated temperature|
|Vibration|MIL-STD-202 Method 204|5 G for 20 minutes, 12 cycles each of 3 orientations. Use 8" X 5" PCB,<br>0.031" thick. 7 secure points on one 8" side and 2 secure points at<br>corners of opposite sides. Parts mounted within 2" from any secure<br>point. Test from 10–2,000 Hz.|
|Mechanical Shock|MIL-STD-202 Method 213|point. Test from 10<br>Figure 1 of Method 213. Condition C|
|Temperature Cycling|JESD22-Method JA-104|1,000 cycles (−40°C to 110°C) Note: Measurement at 24 ±4 hours<br>after test conclusion. 30 minute maximum dwell time at each<br>temperature extreme. 1 minute maximum transition time.|
|Active Flammability|IEC 60384-14|temperature extreme. 1 minute maximum transition time.<br>VR+ 20 surge pulses at 2.5 kV (pulse every 5 seconds)|
|Passive Flammability|IEC 60384-14|IEC 60384–1, IEC 60695–11–5 Needle flame test|
|Biased Humidity|According to Grade IIIB|85°C/85% RH and 310 VAC, 1,000 hours<br>Capacitance change (∆C/C): ≤ 10%<br>Dissipation factor change (∆tan δ): ≤ 24 * 10−3(at 10 kHz) for C ≤ 1 µF<br>Dissipation factor change (∆tan δ): ≤ 15 * 10−3(at 1 kHz) for C > 1 µF<br>Insulation resistance Rins or time constant τ = CR<br>Rins: ≥ 50% of initial limit|
||According to Grade IIIB|85°C/85% RH and 560 VDC, 1,000 hours<br>Capacitance change (∆C/C): ≤ 10%<br>Dissipation factor change (∆tan δ): ≤ 24 * 10−3(at 10 kHz) for C ≤ 1 µF<br>Dissipation factor change (∆tan δ): ≤ 15 * 10−3(at 1 kHz) for C > 1 µF<br>Insulation resistance Rins or time constant τ = CR<br>Rins: ≥ 50% of initial limit|



## **Approvals** 

|**Certification Body**<br>~~a~~|**Mark**|**Specification**|**File Number**|
|---|---|---|---|
|IMQ S-p.A.|<4|EN/IEC 60384–14|CA08.00232|
|UL|cWAUS|UL 60384–14 and<br>CAN/CSA E60384–14<br>(310 VAC)|E97797|
|CQC||IEC 60384–14|CQC20001267604<br>CQC20001267618<br>CQC20001267599<br>CQC20001267617<br>CQC20001267616|



© KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

F3124_R53_X2_310_110C_MIN • 8/15/2023 

8 

Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R53 (Miniature), THB Grade IIIB, Class X2, 310 VAC, 110°C (Automotive Grade) 

## **Environmental Compliance** 

All KEMET EMI capacitors are RoHS compliant. 

**==> picture [68 x 63] intentionally omitted <==**

**==> picture [54 x 68] intentionally omitted <==**

**----- Start of picture text -----**<br>
LH<br>Low Halogen<br>**----- End of picture text -----**<br>


## **Table 1 – Ratings & Part Number Reference** 

**==> picture [542 x 432] intentionally omitted <==**

**----- Start of picture text -----**<br>
Capacitance  Dimensions in mm Lead Spacing  dV/dt  KEMET  Legacy Part<br>Value (µF) T H L (S) (V/µs) Part Number Number<br>0.10 5.0 11.0 18.0 15.0 400 533I3100(1)P0(2) R533I3100(1)P0(2)<br>0.15 6.0 12.0 18.0 15.0 400 533I3150(1)P0(2) R533I3150(1)P0(2)<br>0.22 6.0 12.0 18.0 15.0 400 533I3220(1)P0(2) R533I3220(1)P0(2)<br>0.33 7.5 13.5 18.0 15.0 400 533I3330(1)P0(2) R533I3330(1)P0(2)<br>0.33 9.0 12.5 18.0 15.0 400 533I3330(1)P1(2) R533I3330(1)P1(2)<br>0.47 8.5 14.5 18.0 15.0 400 533I3470(1)P0(2) R533I3470(1)P0(2)<br>0.47 9.0 12.5 18.0 15.0 400 533I3470(1)P1M R533I3470(1)P1M<br>0.47 7.5 18.5 18.0 15.0 400 533I3470(1)P3(2) R533I3470(1)P3(2)<br>0.56 10.0 16.0 18.0 15.0 400 533I3560(1)P0(2) R533I3560(1)P0(2)<br>0.68 10.0 16.0 18.0 15.0 400 533I3680(1)P1M R533I3680(1)P1M<br>0.68 11.0 19.0 18.0 15.0 400 533I3680(1)P0(2) R533I3680(1)P0(2)<br>0.82 11.0 19.0 18.0 15.0 400 533I3820(1)P0M R533I3820(1)P0M<br>0.47 7.0 16.0 26.5 22.5 200 533N3470(1)P0(2) R533N3470(1)P0(2)<br>0.56 7.0 16.0 26.5 22.5 200 533N3560(1)P0(2) R533N3560(1)P0(2)<br>0.68 7.0 16.0 26.5 22.5 200 533N3680(1)P0(2) R533N3680(1)P0(2)<br>0.82 8.5 17.0 26.5 22.5 200 533N3820(1)P0(2) R533N3820(1)P0(2)<br>1.0 8.5 17.0 26.5 22.5 200 533N4100(1)P1M R533N4100(1)P1M<br>1.0 10.0 18.5 26.5 22.5 200 533N4100(1)P0(2) R533N4100(1)P0(2)<br>1.2 10.0 18.5 26.5 22.5 200 533N4120(1)P0(2) R533N4120(1)P0(2)<br>1.5 10.0 18.5 26.5 22.5 200 533N4150(1)P1M R533N4150(1)P1M<br>1.5 11.0 20.0 26.5 22.5 200 533N4150(1)P0(2) R533N4150(1)P0(2)<br>1.8 11.0 20.0 26.5 22.5 200 533N4180(1)P1M R533N4180(1)P1M<br>1.8 13.0 22.0 26.5 22.5 200 533N4180(1)P0(2) R533N4180(1)P0(2)<br>2.2 13.0 22.0 26.5 22.5 200 533N4220(1)P0M R533N4220(1)P0M<br>1.5 11.0 20.0 32.0 27.5 150 533R4150(1)P0(2) R533R4150(1)P0(2)<br>1.8 11.0 20.0 32.0 27.5 150 533R4180(1)P0(2) R533R4180(1)P0(2)<br>2.2 13.0 22.0 32.0 27.5 150 533R4220(1)P0(2) R533R4220(1)P0(2)<br>2.7 14.0 28.0 32.0 27.5 150 533R4270(1)P0(2) R533R4270(1)P0(2)<br>3.3 14.0 28.0 32.0 27.5 150 533R4330(1)P0(2) R533R4330(1)P0(2)<br>3.9 14.0 28.0 32.0 27.5 150 533R4390(1)P0(2) R533R4390(1)P0(2)<br>4.7 14.0 28.0 32.0 27.5 150 533R4470(1)P1M R533R4470(1)P1M<br>4.7 16.0 30.0 32.0 27.5 150 533R4470(1)P2(2) R533R4470(1)P2(2)<br>5.6 16.0 30.0 32.0 27.5 150 533R4560(1)P0M R533R4560(1)P0M<br>6.8 22.0 37.0 32.0 27.5 150 533R4680(1)P0(2) R533R4680(1)P0(2)<br>8.2 22.0 37.0 32.0 27.5 150 533R4820(1)P0(2) R533R4820(1)P0(2)<br>10.0 20.0 40.0 42.0 37.5 100 533W5100(1)P0(2) R533W5100(1)P0(2)<br>12.0 24.0 44.0 42.0 37.5 100 533W5120(1)P0(2) R533W5120(1)P0(2)<br>15.0 24.0 44.0 42.0 37.5 100 533W5150(1)P0(2) R533W5150(1)P0(2)<br>18.0 30.0 45.0 42.0 37.5 100 533W5180(1)P0(2) R533W5180(1)P0(2)<br>20.0 30.0 45.0 42.0 37.5 100 533W5200(1)P0(2) R533W5200(1)P0(2)<br>22.0 30.0 45.0 42.0 37.5 100 533W5220(1)P0(2) R533W5220(1)P0(2)<br>Lead   New KEMET   Legacy<br>Capacitance Value (µF) B (mm) H (mm) L (mm) Spacing (p) dV/dt (V/µs) Part Number Part Number<br>**----- End of picture text -----**<br>


_(1) Insert lead and packaging code. See Ordering Options Table for available options._ 

_(2) M = ±20%, K = ±10%_ 

© KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

F3124_R53_X2_310_110C_MIN • 8/15/2023 

9 

Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R53 (Miniature), THB Grade IIIB, Class X2, 310 VAC, 110°C (Automotive Grade) 

## **Soldering Process** 

The implementation of the RoHS directive has resulted in the selection of SnAuCu (SAC) alloys or SnCu alloys as primary solder material. This has increased the liquidus temperature from 183°C for SnPb eutectic alloys to 217 – 221°C for the new alloys. As a result, the heat stress to the components, even in wave soldering, has increased considerably due to higher preheat and wave temperatures. Polypropylene capacitors are especially sensitive to heat (the melting point of polypropylene is 160 – 170°C). Wave soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of 5 – 15 mm).  Great care must be taken during soldering. The recommended solder profiles from KEMET should be used. Consult KEMET with any questions. In general, the wave soldering curve from IEC Publication 61760-1 Edition 2 serves as a solid guideline for successful soldering. See Figure 1. 

Reflow soldering is not recommended for through-hole film capacitors. Exposing capacitors to a soldering profile in excess of the above-recommended limits may result to degradation of or permanent damage to the capacitors. 

Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert through-hole parts after curing surface mount parts. Consult KEMET to discuss the actual temperature profile in the oven, if through-hole components must pass through the adhesive curing process. A maximum two soldering cycles is recommended. Allow time for the capacitor surface temperature to return to normal temperature before performing the second soldering cycle. 

## **Wave Soldering Recommendations** 

## **Manual Soldering Recommendations** 

**==> picture [526 x 217] intentionally omitted <==**

**----- Start of picture text -----**<br>
Following is the recommendation for manual  300<br>soldering with a soldering iron. 2+3 seconds max<br>250 260°C<br>Recommended Soldering Temperature First Wave Second Wave<br>400 200<br>∆  T < 150°C<br>350 Cooling<br>300 150 Preheating ca. 2°C/second<br>ca. 3.5°C/second typical<br>250 100 Tpreheat ca. 5°C/second<br>200 Typical<br>150 50<br>100<br>0<br>50 0 40 80 120 160 200 240<br>Time (seconds)<br>0<br>0 1 2 3 4 5 6 7<br>Soldering Time (seconds)<br>Temperature (°C)<br>Soldering Iron Bit Temperature (°C)<br>**----- End of picture text -----**<br>


Following is the recommendation for manual soldering with a soldering iron. 

The soldering iron tip temperature should be set at 350°C (+10°C maximum), with the soldering duration not to exceed more than 3 seconds. 

© KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

F3124_R53_X2_310_110C_MIN • 8/15/2023 

10 

Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R53 (Miniature), THB Grade IIIB, Class X2, 310 VAC, 110°C (Automotive Grade) 

## **Soldering Process cont.** 

## **Wave Soldering Recommendations cont.** 

## 1. The table indicates the maximum set-up temperature of the soldering process. 

|**Dielectric**<br>**Film Material**|**Maximum**<br>**Preheat**<br>**Temperature**|**Maximum**<br>**Preheat**<br>**Temperature**|**Maximum**<br>**Peak Soldering**<br>**Temperature**|**Maximum**<br>**Peak Soldering**<br>**Temperature**|
|---|---|---|---|---|
||Capacitor<br>Pitch<br>≥ 10 mm|Capacitor<br>Pitch<br>> 15 mm|Capacitor<br>Pitch<br>≤ 15 mm|Capacitor<br>Pitch<br>> 15 mm|
|Polyester|130°C|130°C|270°C|270°C|
|Polypropylene|110°C|130°C|260°C|270°C|
|Paper|130°C|140°C|270°C|270°C|
|Polyphenylene<br>Sulphide|150°C|160°C|270°C|270°C|



2. The maximum temperature measured inside the capacitor: set the temperature so that the maximum temperature inside the element is below the limit. 

|**Dielectric Film Material**|**Maximum Temperature**<br>**Measured Inside the Element**|
|---|---|
|Polyester|160°C|
|Polypropylene|110°C|
|Paper|160°C|
|Polyphenylene Sulphide|160°C|



_Temperature monitored inside the capacitor._ 

## **Selective Soldering Recommendations** 

Selective dip soldering is a variation of reflow soldering. In this method, the printed circuit board with through-hole components to be soldered is preheated and transported over the solder bath as it is in normal flow soldering, without touching the solder. When the board is over the bath, it is stopped. Pre-designed solder pots are lifted from the bath with molten solder, only at the places of the selected components, and pressed against the lower surface of the board to solder the components. 

The temperature profile for selective soldering is similar to the double wave flow soldering outlined in this document. **However, instead of two baths, there is only one with a time from 3 – 10 seconds.** In selective soldering, the risk of overheating is greater than in double wave flow soldering, and great care must be taken so that the parts do not overheat. 

© KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

F3124_R53_X2_310_110C_MIN • 8/15/2023 

11 

Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R53 (Miniature), THB Grade IIIB, Class X2, 310 VAC, 110°C (Automotive Grade) 

## **Mounting** 

## **Resistance to Vibration and Mechanical Shock** 

## AEC-Q200 Rev. E,  Mechanical Stress Tests: 

|**Mechanical Shock**|**MIL-SDT-202 Method 213**|Figure 1 of Method 213<br>•THT: Condition C<br>•SMD: Condition C<br>•Tested per the Supplier’s recommended mounting method|
|---|---|---|
|**Vibration**|**MIL-SDT-202 Method 204**|•5 g for 20 minutes, 12 cycles each of 3 orientations<br>•Tested per the Supplier’s recommended mounting method<br>•Verification of transfer load: during setup, verify that with the<br>selected PCB design (size, thickness and secure points), or an<br>alternative mount, that the transferred load onto the component<br>corresponds to the requested load. This verification can be achieved<br>using a laser vibrometer or other adequate measuring device<br>•Test from 10 Hz – 2,000 Hz.|



The capacitors are designed for PCB mounting. The stand-off pipes must be in good contact with the printed circuit board. The capacitor body has to be properly fixed (e.g. clamped or glued). 

## **Construction** 

**==> picture [410 x 322] intentionally omitted <==**

**----- Start of picture text -----**<br>
Detailed Cross Section<br>Molded Plastic Case Single-sided Metallized Polypropylene Film  Molded Plastic Case Self-Extinguishing Resin<br>(First Layer)<br>Single-sided Metallized<br>Polypropylene Film<br>(Second Layer)<br>/ a<br>Margin<br>Metal Contact<br>Metal Contact  Layer<br>Layer<br>Margin<br>Leads<br>COMMA,<br>Le |<br>CLMILEM Single-sided<br>|__| Metallized<br>VALLI Polypropylene<br>Lees || Film<br>[ee<br>—lCLL LL LL<br>1 Section<br>**----- End of picture text -----**<br>


## **Winding Scheme** 

© KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

F3124_R53_X2_310_110C_MIN • 8/15/2023 

12 

Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R53 (Miniature), THB Grade IIIB, Class X2, 310 VAC, 110°C (Automotive Grade) 

## **Marking** 

**==> picture [493 x 427] intentionally omitted <==**

**----- Start of picture text -----**<br>
Lead Spacing 15 mm, 22.5 mm, and 27.5 mm<br>FRONT TOP<br>Capacitance Tolerance<br>Approval  Series,<br>Marks Safety Class,<br>Self Healing<br>Manufacturer’s<br>Logo<br>Capacitance,<br>Rated Voltage<br>IEC Climatic<br>Date Code<br>Category<br>Manufacturing<br>Passive Flammability Plant NOTE: Hot imprinting with or without<br>Category color or ink jet or laser marking<br>E B for volume ≥ 1750 mm e [3]<br>C for volume < 1750 mm [3]<br>Lead Spacing 27.5 mm (alternatives*) and 37.5 mm<br>FRONT TOP<br>Safety<br>Series Class Self<br>Healing<br>Manufacturer’s<br>Approval  Capacitance,<br>Marks - Logo aK i [ SH Capacitance<br>IEC Climatic  Tolerance,<br>mt_-40 /110/562.2uF KB 310Vac<M1 +—jeee Rated Voltage<br>Category<br>Passive Flammability Date Code<br>Category<br>B for volume ≥ 1750 mm [3] Manufacturing<br>C for volume < 1750 mm [3] Plant<br>*Differences are caused by technology<br>(clichee, laser, or ink) and production line.<br>**----- End of picture text -----**<br>


_Slight change in the layout can be possible but this does not affect the content of the information of the current marking. This change will be achieved without impact to product form, fit or function, as the products are equivalent with respect to physical, mechanical, quality and reliability characteristics._ 

|**Manufacturing Date Code(IEC 60062)**<br>~~a~~<br>~~ee~~<br>~~eeee~~<br>~~eee~~|**Manufacturing Date Code(IEC 60062)**<br>~~a~~<br>~~ee~~<br>~~eeee~~<br>~~eee~~|**Manufacturing Date Code(IEC 60062)**<br>~~a~~<br>~~ee~~<br>~~eeee~~<br>~~eee~~|**Manufacturing Date Code(IEC 60062)**<br>~~a~~<br>~~ee~~<br>~~eeee~~<br>~~eee~~|**Manufacturing Date Code(IEC 60062)**<br>~~a~~<br>~~ee~~<br>~~eeee~~<br>~~eee~~|**Manufacturing Date Code(IEC 60062)**<br>~~a~~<br>~~ee~~<br>~~eeee~~<br>~~eee~~|**Manufacturing Date Code(IEC 60062)**<br>~~a~~<br>~~ee~~<br>~~eeee~~<br>~~eee~~|**Manufacturing Date Code(IEC 60062)**<br>~~a~~<br>~~ee~~<br>~~eeee~~<br>~~eee~~|**Manufacturing Date Code(IEC 60062)**<br>~~a~~<br>~~ee~~<br>~~eeee~~<br>~~eee~~|**Manufacturing Date Code(IEC 60062)**<br>~~a~~<br>~~ee~~<br>~~eeee~~<br>~~eee~~|
|---|---|---|---|---|---|---|---|---|---|
|**Year**<br>~~aee~~<br>~~==~~|**Code**<br>~~ee~~<br>~~==~~|**Year**<br>~~ee~~|**Code**<br>~~ee~~|**Year**<br>~~ee~~<br>~~ee~~<br>~~|~~|**Code**<br>~~ee~~<br>~~ee~~<br>~~|~~<br>~~|~~|**Month**<br>~~ee~~<br>~~ee~~|**Code**<br>~~ee~~<br>~~ee~~<br>~~|~~<br>~~|~~|**Month**<br>~~ee~~<br>~~eee~~<br>~~|~~<br>~~|~~|**Code**<br>~~ee~~<br>~~eee~~<br>~~|~~|
|2020<br>~~==~~|M<br>~~==~~|2027|V|2034<br>~~ee~~<br>~~|~~|E<br>~~ee~~<br>~~|~~<br>~~|~~|January<br>~~ee ~~|1<br> ~~ee~~<br>~~|~~<br>~~|~~|July<br>~~eee~~<br>~~|~~<br>~~|~~|7<br>~~eee~~<br>~~|~~|
|2021<br>~~==~~|N<br>~~==~~|2028<br>~~|~~|W<br>~~|~~|2035<br>~~|~~<br>~~|~~<br>~~|~~|F<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~|January<br>February<br>~~|~~<br>~~|~~<br>~~|~~|2<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~|August<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~|8<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~|
|2022<br>~~==~~|P<br>~~==~~|2029<br>~~|~~|X<br>~~|~~|2036<br>~~|~~<br>~~|~~<br>~~|~~|G<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~|March<br>~~|~~<br>~~|~~|3<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~|September<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~|9<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~|
|2023<br>~~==~~|R<br>~~==~~|2030<br>~~|~~|A<br>~~|~~|2037<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~|H<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~|April<br>~~|~~<br>~~|~~<br>~~|~~|4<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~|October<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~|O<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~|
|2024<br>~~==~~|S<br>~~==~~|2031<br>~~|~~<br>||B<br>~~|~~|2038<br>~~|~~<br>~~|~~<br>~~ee~~|K<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~ee~~|May<br>~~|~~<br>~~|~~|5<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~<br>|<br>||November<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~<br>||N<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~|
|2025<br>~~==~~|T<br>~~==~~|2032<br>||C|2039<br>~~|~~<br>~~ee~~|L<br>~~|~~<br>~~|~~<br>~~ee~~|June|6<br>~~|~~<br>~~|~~<br>|<br>||December<br>~~|~~<br>~~|~~<br>||D<br>~~|~~|
|2026<br>~~==~~|U<br>~~==~~|2033<br>||D|2040<br>~~|~~<br>~~ee~~|M<br>~~|~~<br>~~|~~<br>~~ee~~||~~|~~<br>~~|~~<br>|<br>||~~|~~<br>~~|~~<br>||~~|~~|



© KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

F3124_R53_X2_310_110C_MIN • 8/15/2023 

13 

Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R53 (Miniature), THB Grade IIIB, Class X2, 310 VAC, 110°C (Automotive Grade) 

## **Packaging Quantities** 

**==> picture [542 x 383] intentionally omitted <==**

**----- Start of picture text -----**<br>
Lead  Bulk Standard  Large<br>Thickness  Height Length Bulk Ammo<br>Spacing Short  Reel Reel Pizza<br>(mm) (mm) (mm) Long Leads Taped<br>(mm) Leads ø 355 mm ø 500 mm<br>00 - JA - JB<br>Lead and Packaging Code: JE - JH JM 40 – 50 GY CK DQ BB<br>5 11 18 2,000 1,250 1,000 600 1,250 800 1,122<br>6 12 18 1,750 1,000 900 500 1,000 680 935<br>7.5 13.5 18 1,000 800 700 350 800 500 748<br>7.5 18.5 18 900 650 500 - 800 500 748<br>15<br>8.5 14.5 18 1,000 650 500 300 700 440 663<br>9 12.5 18 1,000 700 520 270 650 410 612<br>10 16 18 750 550 500 270 600 380 561<br>11 19 18 450 400 350 - 500 340 510<br>7 16 26.5 700 450 500 - 550 380 564<br>8.5 17 26.5 468 350 300 - 450 280 468<br>22.5 10 18.5 26.5 396 350 300 - 350 235 396<br>11 20 26.5 360 200 250 - 350 217 360<br>13 22 26.5 300 150 200 - 300 - 300<br>11 20 32 560 336 336 - 350 - 300<br>13 22 32 480 288 288 - 300 - 250<br>27.5 14 28 32 352 176 176 - - - 230<br>16 30 32 288 144 144 - - - 200<br>22 37 32 168 112 112 - - - 150<br>20 40 42 58 58 58 - - - -<br>37.5 24 44 42 44 44 44 - - - -<br>30 45 42 36 36 36 - - - -<br>**----- End of picture text -----**<br>


© KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

F3124_R53_X2_310_110C_MIN • 8/15/2023 

14 

Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R53 (Miniature), THB Grade IIIB, Class X2, 310 VAC, 110°C (Automotive Grade) 

## **Lead Taping & Packaging (IEC 60286–2)** 

**Figure 1 – Lead Spacing 15 mm** 

**Figure 2 – Lead Spacing 22.5 & 27.5 mm** 

**==> picture [292 x 122] intentionally omitted <==**

**----- Start of picture text -----**<br>
P P<br>P2 ∆h ∆h<br>H0 W2 Ød A B<br>W0 W1 W<br>t<br>F P1 P0 D0 A−B P1 P2<br>t<br>**----- End of picture text -----**<br>


## **Taping Specification** 

**==> picture [353 x 49] intentionally omitted <==**

**----- Start of picture text -----**<br>
Dimensions (mm)<br>Description Symbol Lead Space<br>Tolerance<br>15.0 22.5 27.5<br>**----- End of picture text -----**<br>


|**Description**|**Symbol**|**Dimensions(mm)**|**Dimensions(mm)**|**Dimensions(mm)**|**Dimensions(mm)**|
|---|---|---|---|---|---|
|||Lead Space|||Tolerance|
|||15.0|22.5|27.5||
|||||||
|Lead wire diameter|d|0.6 – 0.8|0.8|0.8|±0.05|
|Taping lead space|P|25.4|38.1|38.1|±1|
|Feed hole lead space *|P0|12.7|12.7|12.7|±0.2 **|
|Centering of the lead<br>wire|P1|5.2|7.8|5.3|±0.7|
|Centering of the body|P2|12.7|19.05|19.05|±1.3|
|Lead spacing ***|F|15.0|22.5|27.5|+0.6/−0.1|
|Component alignment|∆h|0|0|0|±2|
|Component deviation|∆p|0|0|0|±1|
|Height of component<br>from tape center|H0****|18.5|18.5|18.5|±0.5|
|Carrier tape width|W|18|18|18|+1/−0.5|
|Hold down tape width|W0|10|10|10|Minimum|
|Hole position|W1|9|9|9|±0.5|
|Hold down tape position|W2|3|3|3|Maximum|
|Feed hole diameter|D0|4|4|4|±0.2|
|Total Tape thickness|t|0.7|0.7|0.7|±0.2|



- _Available also 15 mm._ 

- _** Maximum 1 mm on 20 lead spacing._ 

- _*** 15 mm and 10 mm taped to 7.5 mm (crimped leads) available upon request._ 

- _**** H0 = 16.5 mm is available upon request._ 

© KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

F3124_R53_X2_310_110C_MIN • 8/15/2023 

15 

Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R53 (Miniature), THB Grade IIIB, Class X2, 310 VAC, 110°C (Automotive Grade) 

## **Lead Taping & Packaging (IEC 60286–2) cont.** 

## **Ammo Specifi cations** 

|**Dimensions(mm)**|**Dimensions(mm)**|**Dimensions(mm)**|
|---|---|---|
|**H**|**W**|**T**|
|360|340|59|



## **Reel Specifi cations** 

||**Dimensions(mm)**|**Dimensions(mm)**|**Dimensions(mm)**|
|---|---|---|---|
|**Reel Size**|**D**|**H**|**W**|
|Standard|355|30|55 Maximum|
|Large|500|25||



**==> picture [6 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
D<br>**----- End of picture text -----**<br>


**==> picture [129 x 149] intentionally omitted <==**

**----- Start of picture text -----**<br>
H<br>W<br>T<br>**----- End of picture text -----**<br>


**==> picture [216 x 149] intentionally omitted <==**

**----- Start of picture text -----**<br>
H<br>W<br>**----- End of picture text -----**<br>


© KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

F3124_R53_X2_310_110C_MIN • 8/15/2023 

16 

Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R53 (Miniature), THB Grade IIIB, Class X2, 310 VAC, 110°C (Automotive Grade) 

## 

## **Disclaimer** 

YAGEO Corporation and its affi  liates do not recommend the use of commercial or automotive grade products for high reliability applications or manned space fl ight. 

All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. 

Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. 

Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. 

Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not be required. 

Additional information about production site flexibility can be found <here> 

_KEMET is a registered trademark of KEMET Electronics Corporation._ 

© KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

F3124_R53_X2_310_110C_MIN • 8/15/2023 

17