R49AR368000B1M

Metallized Polypropylene Film EMI Suppression Capacitors **R49, Class X1, 330 VAC, 110°C** 

## **Overview** 

The R49 is constructed of metallized polypropylene film encapsulated with self-extinguishing resin in a box of material meeting the requirements of UL 94 V–0. 

## **Applications** 

For use as electromagnetic interference, (EMI) suppression filter in across-the-line applications requires X1 safety classification. Intended for the use in situations where exposure to shock in the event of capacitor failure is not possible. Not for use in "series with mains" type applications. X1 classified capacitors are only for the use in a permanently connected apparatus with a connection to mains, which cannot be loosened without the use of a tool. 

## **Benefits** 

- Approvals: ENEC, UL, cUL 

- Class X1 (IEC 60384-14) 

- Rated voltage: 330 VAC 50/60 Hz 

- Capacitance range: 0.047 – 6.8 µF 

- Lead spacing: 15.0 – 37.5 mm 

- Capacitance tolerance: ±20%, ±10% 

- Climatic category: 40/110/56, IEC 60068–1 

- Tape and reel in accordance with IEC 60286–2 

- RoHS Compliant and lead-free terminations 

- Operating temperature range of −40˚C to +110˚C 

- 100% screening factory test at 2,200 VDC/1,500 VAC 

- Self-healing properties 

## **Part Number System** 

|**R49**|**A**|**N**|**3150**|**00**|**B1**|**M**|
|---|---|---|---|---|---|---|
|Series|Rated Voltage<br> (VAC)|Lead Spacing<br>(mm)|Capacitance<br>Code(pF)|Lead and<br>Packaging Code|Internal Use|Capacitance<br>Tolerance|
|X1, Metallized<br>Polypropylene|A = 330|I = 15.0<br>N = 22.5<br>R = 27.5<br>W = 37.5|The last three<br>digits represent<br>significant figures.<br>The first digit<br>specifies number<br>of zeros to be<br>added.|See Ordering<br>Options Table|A1<br>A2<br>A3<br>B1<br>B2|K = ±10%<br>M = ±20%|



~~_~~ 

**Built Into Tomorrow** 

© KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

F3099_R49_X1_330 • 8/15/2023 

1 

Metallized Polypropylene Film EMI Suppression Capacitors R49, Class X1, 330 VAC, 110ºC 

## **Ordering Options Table** 

**==> picture [406 x 492] intentionally omitted <==**

**----- Start of picture text -----**<br>
Lead Spacing<br>Lead Length Lead and<br>Nominal  Type of Leads and Packaging<br>(mm) Packaging Code<br>(mm)<br>Standard Lead and Packaging Options<br>Bulk (Bag) – Short Leads 4 +2/−0 00<br>Ammo Pack H0= 18.5 ±0.5 DQ<br>Other Lead and Packaging Options<br>Tape & Reel (Large Reel) H0= 18.5 ±0.5 CK<br>10,   Bulk (Bag) – Short Leads 3.5 +0.5/−0 JB<br>15,   Bulk (Bag) – Short Leads 4.0 +0.5/−0 JE<br>22.5<br>Bulk (Bag) – Short Leads 3.2 +0.3/−0.2 JH<br>Bulk (Bag) – Long Leads 18 ±1 JM<br>Bulk (Bag) – Long Leads 30 +5/−0 40<br>Bulk (Bag) – Long Leads 25 +2/ − 1 50<br>Bulk (Bag) – Insulated Rigid Leads 30 +5/−0 (sp 8 ±2) 51<br>Bulk (Bag) – Insulated Flexible Leads 150 ±5 (sp 8 ±2) 52<br>Standard Lead and Packaging Options<br>Bulk (Tray) – Short Leads 4 +2/−0 00<br>Tape & Reel (Large Reel) H0= 18.5 ±0.5 CK [1]<br>Other Lead and Packaging Options<br>27.5<br>Bulk (Tray) – Long Leads 30 +5/−0 40<br>Bulk (Tray) – Long Leads 25 +2/−1 50<br>Bulk (Bag) – Insulated Rigid Leads 30 +5/−0 (sp 8 ±2) 51<br>Bulk (Bag) – Insulated Flexible Leads 150 ±5 (sp 8 ±2) 52<br>Standard Lead and Packaging Options<br>Bulk (Tray) – Short Leads 4 +2/−0 00<br>Other Lead and Packaging Options<br>37.5<br>Bulk (Tray) – Long Leads 30 +5/−0 40<br>Bulk (Tray) – Long Leads 25 +2/−1 50<br>Bulk (Bag) – Insulated Rigid Leads 30 +5/−0 (sp 8 ±2) 51<br>Bulk (Bag) – Insulated Flexible Leads 150 ±5 (sp 8 ±2) 52<br>**----- End of picture text -----**<br>


_1 Not for all sizes, see "Packaging Quantities" table_ 

© KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

F3099_R49_X1_330 • 8/15/2023 

2 

Metallized Polypropylene Film EMI Suppression Capacitors R49, Class X1, 330 VAC, 110ºC 

## **Dimensions – Millimeters** 

**==> picture [236 x 214] intentionally omitted <==**

**----- Start of picture text -----**<br>
Loose Taped<br>L T<br>H<br>H0<br>S<br>LL<br>F<br>P2 P2 P2<br>Insulated Rigid Leads Insulated Flexible Leads 0.5 mm [2]<br>FRONT VIEW SIDE VIEW FRONT VIEW SIDE VIEW<br> L   T   L   T<br> H   H<br>ØF<br>35 +0/−5 150 ±5<br>8 ±2 8 ±2<br>**----- End of picture text -----**<br>


**==> picture [439 x 35] intentionally omitted <==**

**----- Start of picture text -----**<br>
S T H L F<br>Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance<br>**----- End of picture text -----**<br>


|**S**|**S**|**T**|**T**|**H**|**H**|**L**|**L**|**F**|**F**|
|---|---|---|---|---|---|---|---|---|---|
|Nominal|Tolerance|Nominal|Tolerance|Nominal|Tolerance|Nominal|Tolerance|Nominal|Tolerance|
|||||||||||
|15.0|±0.4|5.0|+0.2/−0.5|11.0|+0.1/−0.5|18.0|+0.3/−0.5|0.6|±0.05|
|15.0|±0.4|6.0|+0.2/−0.5|12.0|+0.1/−0.5|18.0|+0.3/−0.5|0.6|±0.05|
|15.0|±0.4|6.0|+0.2/−0.5|17.5|+0.1/−0.5|18.0|+0.3/−0.5|0.6|±0.05|
|15.0|±0.4|8.5|+0.2/−0.5|14.5|+0.1/−0.5|18.0|+0.5/−0.5|0.6|±0.05|
|15.0|±0.4|10.0|+0.2/−0.5|16.0|+0.1/−0.5|18.0|+0.6/−0.5|0.8|±0.05|
|15.0|±0.4|11.0|+0.2/−0.5|19.0|+0.1/−0.5|18.0|+0.7/−0.5|0.8|±0.05|
|15.0|±0.4|13.0|+0.2/−0.5|12.0|+0.1/−0.5|18.0|+0.8/−0.5|0.8|±0.05|
|22.5|±0.4|6.0|+0.2/−0.5|15.0|+0.1/−0.5|26.5|+0.3/−0.5|0.8|±0.05|
|22.5|±0.4|7.0|+0.2/−0.5|16.0|+0.1/−0.5|26.5|+0.3/−0.5|0.8|±0.05|
|22.5|±0.4|8.5|+0.2/−0.5|17.0|+0.1/−0.5|26.5|+0.3/−0.5|0.8|±0.05|
|22.5|±0.4|10.0|+0.2/−0.5|18.5|+0.1/−0.5|26.5|+0.3/−0.5|0.8|±0.05|
|22.5|±0.4|13.0|+0.2/−0.5|22.0|+0.1/−0.5|26.5|+0.3/−0.5|0.8|±0.05|
|27.5|±0.4|9.0|+0.2/−0.7|17.0|+0.1/−0.7|32.0|+0.3/−0.7|0.8|±0.05|
|27.5|±0.4|11.0|+0.2/−0.7|20.0|+0.1/−0.7|32.0|+0.3/−0.7|0.8|±0.05|
|27.5|±0.4|13.0|+0.2/−0.7|22.0|+0.1/−0.7|32.0|+0.3/−0.7|0.8|±0.05|
|27.5|±0.4|13.0|+0.2/−0.7|25.0|+0.1/−0.7|32.0|+0.3/−0.7|0.8|±0.05|
|27.5|±0.4|14.0|+0.2/−0.7|28.0|+0.1/−0.7|32.0|+0.3/−0.7|0.8|±0.05|
|27.5|±0.4|18.0|+0.2/−0.7|33.0|+0.1/−0.7|32.0|+0.3/−0.7|0.8|±0.05|
|27.5|±0.4|22.0|+0.2/−0.7|37.0|+0.1/−0.7|32.0|+0.3/−0.7|0.8|±0.05|
|37.5|±0.4|11.0|+0.3/−0.7|22.0|+0.1/−0.7|41.5|+0.3/−0.7|1.0|±0.05|
|37.5|±0.4|13.0|+0.3/−0.7|24.0|+0.1/−0.7|41.5|+0.3/−0.7|1.0|±0.05|
|37.5|±0.4|16.0|+0.3/−0.7|28.5|+0.1/−0.7|41.5|+0.3/−0.7|1.0|±0.05|
|37.5|±0.4|19.0|+0.3/−0.7|32.0|+0.1/−0.7|41.5|+0.3/−0.7|1.0|±0.05|
|37.5|±0.4|30.0|+0.3/−0.7|45.0|+0.1/−0.7|41.5|+0.3/−0.7|1.0|±0.05|
|**Note: See Ordering Options Table for lead length (LL/H0) options.**||||||||||



© KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

F3099_R49_X1_330 • 8/15/2023 

3 

Metallized Polypropylene Film EMI Suppression Capacitors R49, Class X1, 330 VAC, 110ºC 

## **Performance Characteristics** 

|Dielectric|Polypropylene flm|Polypropylene flm|Polypropylene flm|Polypropylene flm|
|---|---|---|---|---|
|Plates|Metal layer deposited by evaporation under vacuum||||
|Winding|Non-inductive type||||
|Leads|Tinned wire||||
|Protection|Plastic case, thermosetting resin flled. Box material is solvent resistant and fame retardant according to UL94.||||
|Related documents|IEC 60384-14, EN 60384-14||||
|Rated Voltage (VR)|330 VAC (50/60 Hz)||||
|Recommended DC Voltage|800 VDC||||
|Capacitance Range|0.047 – 6.8 µF||||
|Capacitance Values|E6 series (IEC 60063)||||
|Capacitance Tolerance|±10%, ±20%||||
|Temperature Range|−40° to +110°C||||
|Climatic Category|40/110/56  IEC 60068-1||||
|Storage Conditions|Storage time: ≤ 24 months from the date marked on the label package||||
||Average relative humidity per year ≤ 70%||||
||RH ≤ 85% for 30 days randomly distributed throughout the year||||
||Dew is absent||||
||Temperature: −40 to 80°C (see "Maximum Humidity in Storage Conditions" graph below)||||
|Approvals|ENEC, UL, cUL||||
|Dissipation Factor (tanδ)|≤ 0.1% (0.06%*) at 1 kHz, +25°C ±5°C (* typical value)||||
|Test Voltage Between Terminals|The 100% screening factory test is carried out at 2,200 VDC/1,500 VAC. The voltage level is selected to meet<br>the requirements in applicable equipment standards. All electrical characteristics are checked after the test.<br>It is not permitted to repeat this test as there is a risk to damage the capacitor. KEMET is not liable in such<br>case for any failures.||||
|Insulation Resistance|Measured at +25°C ±5°C, according to IEC 60384–2||||
||Minimum Values Between Terminals||||
||Voltage Charge|Voltage Charge Time|C ≤ 0.33 μF|C > 0.33 μF|
||100 VDC|1 minute|≥ 1 • 105MΩ<br>(≥ 5 • 105MΩ)*|≥ 30,000 MΩ • µF<br>(≥ 150,000 MΩ •µF)*|



_* Typical value_ 

© KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

F3099_R49_X1_330 • 8/15/2023 

4 

Metallized Polypropylene Film EMI Suppression Capacitors R49, Class X1, 330 VAC, 110ºC 

## **Performance Characteristics cont.** 

**==> picture [244 x 176] intentionally omitted <==**

**----- Start of picture text -----**<br>
Maximum Humidity in Storage Condition<br>100<br>90<br>| is a<br>80<br>fc)<br>70 2 a a ee<br>AN<br>60 i}<br>s%<br>50 N%<br>ve<br>40 8<br>vs<br>30 30 Days Nx<br>a&<br>20 Annual Average ~ S iq + ~ ~<br>10<br>0<br>−40 −20 0 20 40 60 80<br>Temperature (°C)<br>Relative Humidity (%)<br>**----- End of picture text -----**<br>


## **Impedance Graph** 

© KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

F3099_R49_X1_330 • 8/15/2023 

5 

Metallized Polypropylene Film EMI Suppression Capacitors R49, Class X1, 330 VAC, 110ºC 

## **Environmental Test Data** 

|**Test**|**IEC Publication**|**Procedure**|
|---|---|---|
|Endurance|EN/IEC 60384–14|1.25 x VRVAC 50 Hz, once every hour increase to 1,000 VAC for 0.1<br>second,1,000 hours at upper rated temperature|
|Vibration|IEC 60068–2–6 Test Fc|3 directions at 2 hours each 10 – 55 Hz at 0.75 mm or 98 m/s2|
|Bump|IEC 60068–2–29 Test Eb|1,000 bumps at 390 m/s2|
|Change of Temperature|IEC 60068–2–14 Test Na|Upper and lower rated temperature 5 cycles|
|Active Flammability|IEC 60384–14|VR+20 surge pulses at 4 kV (pulse every 5 seconds)|
|Passive Flammability|IEC 60384–14|IEC 60384–1, IEC 60695–11–5 Needle flame test|
|Damp Heat Steady State|IEC 60068–2–78 Test Cab|+40°C and 93% RH, 56 days|



## **Approvals** 

~~ee~~ **Certification Body Mark Specification File Number** IMQ S.p.A. EN/IEC 60384-14 CA08.00030 ~~BO~~ UL 60384-14 and UL CAN/CSA E60384-14 E97797 (330 VAC) ~~We~~ 

## **Environmental Compliance** 

All KEMET EMI capacitors are RoHS Compliant. 

© KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

F3099_R49_X1_330 • 8/15/2023 

6 

Metallized Polypropylene Film EMI Suppression Capacitors R49, Class X1, 330 VAC, 110ºC 

## **Table 1 – Ratings & Part Number Reference** 

**==> picture [542 x 332] intentionally omitted <==**

**----- Start of picture text -----**<br>
Capacitance  Dimensions in mm Lead Spacing  dV/dt  KEMET   Customer<br>Value (µF) T H L (S) (V/µs) Part Number Part Number<br>0.047 5.0 11.0 18.0 15.0 500 49AI2470(1)B1(2) R49AI2470(1)B1(2)<br>0.068 6.0 12.0 18.0 15.0 500 49AI2680(1)B1(2) R49AI2680(1)B1(2)<br>0.068 6.0 17.5 18.0 15.0 500 49AI2680(1)A2(2) R49AI2680(1)A2(2)<br>0.10 6.0 17.5 18.0 15.0 500 49AI3100(1)A2(2) R49AI3100(1)A2(2)<br>0.15 8.5 14.5 18.0 15.0 500 49AI3150(1)B1(3) R49AI3150(1)B1(3)<br>0.22 10.0 16.0 18.0 15.0 500 49AI3220(1)B2(3) R49AI3220(1)B2(3)<br>0.22 11.0 19.0 18.0 15.0 500 49AI3220(1)B1(2) R49AI3220(1)B1(2)<br>0.15 6.0 15.0 26.5 22.5 400 49AN3150(1)B1(2) R49AN3150(1)B1(2)<br>0.22 7.0 16.0 26.5 22.5 400 49AN3220(1)B1(2) R49AN3220(1)B1(2)<br>0.33 8.5 17.0 26.5 22.5 400 49AN3330(1)B1(3) R49AN3330(1)B1(3)<br>0.47 10.0 18.5 26.5 22.5 400 49AN3470(1)B1(3) R49AN3470(1)B1(3)<br>0.68 13.0 22.0 26.5 22.5 400 49AN3680(1)B1(3) R49AN3680(1)B1(3)<br>0.33 9.0 17.0 32.0 27.5 200 49AR3330(1)A1(2) R49AR3330(1)A1(2)<br>0.47 11.0 20.0 32.0 27.5 200 49AR3470(1)A1(2) R49AR3470(1)A1(2)<br>0.68 11.0 20.0 32.0 27.5 200 49AR3680(1)B1(2) R49AR3680(1)B1(2)<br>0.68 13.0 22.0 32.0 27.5 200 49AR3680(1)A1(2) R49AR3680(1)A1(2)<br>1.0 13.0 25.0 32.0 27.5 200 49AR4100(1)B1(2) R49AR4100(1)B1(2)<br>1.0 14.0 28.0 32.0 27.5 200 49AR4100(1)A1(2) R49AR4100(1)A1(2)<br>1.5 14.0 28.0 32.0 27.5 200 49AR4150(1)B1(2) R49AR4150(1)B1(2)<br>1.5 18.0 33.0 32.0 27.5 200 49AR4150(1)A1(2) R49AR4150(1)A1(2)<br>2.2 18.0 33.0 32.0 27.5 200 49AR4220(1)B1(2) R49AR4220(1)B1(2)<br>2.2 22.0 37.0 32.0 27.5 200 49AR4220(1)A1(2) R49AR4220(1)A1(2)<br>3.3 22.0 37.0 32.0 27.5 200 49AR4330(1)B1(2) R49AR4330(1)B1(2)<br>0.68 11.0 22.0 41.5 37.5 100 49AW3680(1)B1(2) R49AW3680(1)B1(2)<br>1.0 11.0 22.0 41.5 37.5 100 49AW4100(1)B1(2) R49AW4100(1)B1(2)<br>1.5 13.0 24.0 41.5 37.5 100 49AW4150(1)B1(2) R49AW4150(1)B1(2)<br>2.2 16.0 28.5 41.5 37.5 100 49AW4220(1)B1(2) R49AW4220(1)B1(2)<br>3.3 19.0 32.0 41.5 37.5 100 49AW4330(1)B1(2) R49AW4330(1)B1(2)<br>4.7 20.0 40.0 41.5 37.5 100 49AW4470(1)B1(2) R49AW4470(1)B1(2)<br>6.8 30.0 45.0 41.5 37.5 100 49AW4680(1)B1(2) R49AW4680(1)B1(2)<br>Lead   KEMET   Customer<br>Capacitance Value (µF) T (mm) H (mm) L (mm) Spacing (S) dV/dt (V/µs) Part Number Part Number<br>**----- End of picture text -----**<br>


_(1) Insert lead and packaging code. See Ordering Options Table for available options._ 

_(2) M = ±20%, K = ±10%_ 

_(3) M = ±20% (only available tolerance)._ 

© KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

F3099_R49_X1_330 • 8/15/2023 

7 

Metallized Polypropylene Film EMI Suppression Capacitors R49, Class X1, 330 VAC, 110ºC 

## **Soldering Process** 

The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder. This has increased the liquidus temperature from that of 183°C for SnPb eutectic alloy to 217 – 221°C for the new alloys. As a result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave temperatures. Polypropylene capacitors are especially sensitive to heat (the melting point of polypropylene is 160 – 170°C). Wave soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of 5 mm to 15 mm), and great care has to be taken during soldering. The recommended solder profiles from KEMET should be used. Please consult KEMET with any questions. In general, the wave soldering curve from IEC Publication 61760-1 Edition 2 serves as a solid guideline for successful soldering. Please see Figure 1. 

Reflow soldering is not recommended for through-hole film capacitors. Exposing capacitors to a soldering profile in excess of the above the recommended limits may result to degradation or permanent damage to the capacitors. 

Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert through-hole parts after the curing of surface mount parts. Consult KEMET to discuss the actual temperature profile in the oven, if through-hole components must pass through the adhesive curing process. A maximum two soldering cycles is recommended. Please allow time for the capacitor surface temperature to return to a normal temperature before the second soldering cycle. 

## **Manual Soldering Recommendations** 

The following is the recommendation for manual soldering with a soldering iron. 

**==> picture [200 x 176] intentionally omitted <==**

**----- Start of picture text -----**<br>
Recommended Soldering Temperature<br>400<br>350<br>300<br>250<br>200<br>150<br>100<br>50<br>0<br>0 1 2 3 4 5 6 7 8<br>Soldering Time (seconds)<br>Soldering Iron Bit Temperature (°C)<br>**----- End of picture text -----**<br>


## **Wave Soldering Recommendations** 

**==> picture [297 x 195] intentionally omitted <==**

**----- Start of picture text -----**<br>
300<br>2+3 seconds max<br>250 260°C<br>First Wave Second Wave<br>200<br>∆  T < 150°C<br>Cooling<br>150 Preheating ca. 2°C/second<br>ca. 3.5°C/second typical<br>T ca. 5°C/second<br>100 preheat<br>Typical<br>50<br>0<br>0 40 80 120 160 200 240<br>Time (seconds)<br>Temperature (°C)<br>**----- End of picture text -----**<br>


The soldering iron tip temperature should be set at 350°C (+10°C maximum) with the soldering duration not to exceed more than 3 seconds. 

© KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

F3099_R49_X1_330 • 8/15/2023 

8 

Metallized Polypropylene Film EMI Suppression Capacitors R49, Class X1, 330 VAC, 110ºC 

## **Soldering Process cont.** 

## **Wave Soldering Recommendations cont.** 

1. The table indicates the maximum set-up temperature of the soldering process Figure 1 

|**Dielectric**<br>**Film Material**|**Maximum**<br>**Preheat**<br>**Temperature**|**Maximum**<br>**Preheat**<br>**Temperature**|**Maximum**<br>**Peak Soldering**<br>**Temperature**|**Maximum**<br>**Peak Soldering**<br>**Temperature**|
|---|---|---|---|---|
||Capacitor<br>Pitch<br>≤ 15 mm|Capacitor<br>Pitch<br>> 15 mm|Capacitor<br>Pitch<br>≤ 15 mm|Capacitor<br>Pitch<br>> 15 mm|
|Polyester|130°C|130°C|270°C|270°C|
|Polypropylene|110°C|130°C|260°C|270°C|
|Paper|130°C|140°C|270°C|270°C|
|Polyphenylene<br>Sulphide|150°C|160°C|270°C|270°C|



## 2. The maximum temperature measured inside the capacitor: 

Set the temperature so that inside the element the maximum temperature is below the limit: 

|**Dielectric Film Material**|**Maximum temperature**<br>**measured inside the element**|
|---|---|
|Polyester|160°C|
|Polypropylene|110°C|
|Paper|160°C|
|Polyphenylene<br>sulphide|160°C|



_Temperature monitored inside the capacitor._ 

## **Selective Soldering Recommendations** 

Selective dip soldering is a variation of reflow soldering. In this method, the printed circuit board with through-hole components to be soldered is preheated and transported over the solder bath as in normal flow soldering without touching the solder. When the board is over the bath, it is stopped and pre-designed solder pots are lifted from the bath with molten solder only at the places of the selected components, and pressed against the lower surface of the board to solder the components. 

The temperature profile for selective soldering is similar to the double wave flow soldering outlined in this document, **however, instead of two baths, there is only one bath with a time from 3 to 10 seconds.** In selective soldering, the risk of overheating is greater than in double wave flow soldering, and great care must be taken so that the parts are not overheated. 

© KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

F3099_R49_X1_330 • 8/15/2023 

9 

Metallized Polypropylene Film EMI Suppression Capacitors R49, Class X1, 330 VAC, 110ºC 

## **Construction** 

**==> picture [512 x 413] intentionally omitted <==**

**----- Start of picture text -----**<br>
Detailed Cross Section<br>Molded Plastic Case Single-sided Metallized Polypropylene Film  Molded Plastic Case Self-Extinguishing Resin<br>(First Layer)<br>Single-sided Metallized<br>Polypropylene Film<br>(Second Layer)<br>/ Margin a|<br>Margin<br>Metal Contact<br>Metal Contact  Layer<br>Layer<br>Margin<br>Leads<br>LLL<br>ee e _|<br>(CLL . Single-sided<br>eee Metallized<br>VL LLL LL LE | Polypropylene<br>ee e _| Film<br>eee<br>CLLLL LL LL LED<br>1 Section<br>**----- End of picture text -----**<br>


## **Winding Scheme** 

© KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

F3099_R49_X1_330 • 8/15/2023 

10 

Metallized Polypropylene Film EMI Suppression Capacitors R49, Class X1, 330 VAC, 110ºC 

## **Marking** 

## **Lead Spacing 10 mm** 

**==> picture [446 x 174] intentionally omitted <==**

**----- Start of picture text -----**<br>
FRONT TOP<br>Capacitance Tolerance<br>Series,<br>Approval<br>Dielectric<br>Marks<br>Code, Safety<br>Class, Self<br>Healing<br>Manufacturer’s<br>Capacitance,<br>Logo<br>Rated Voltage<br>IEC Climatic<br>Date Code<br>Category<br>Manufacturing  NOTE: Hot imprinting with or without<br>Plant color or ink jet or laser marking<br>Passive Flammability<br>Category<br>**----- End of picture text -----**<br>


## **Lead Spacing 15 mm, 22.5 mm (small case sizes)** 

**==> picture [446 x 189] intentionally omitted <==**

**----- Start of picture text -----**<br>
FRONT TOP<br>Capacitance Tolerance<br>Series,<br>Approval<br>Dielectric<br>Marks<br>Code, Safety<br>Class, Self<br>Healing<br>Manufacturer’s<br>Capacitance,<br>Logo<br>Rated Voltage<br>IEC Climatic<br>Date Code<br>Category<br>Manufacturing  NOTE: Hot imprinting with or without<br>Plant color or ink jet or laser marking<br>Passive Flammability<br>Category:<br>B for volume ≥ 1750 mm [3]<br>C for volume < 1750 mm [3]<br>**----- End of picture text -----**<br>


_* Differences caused by technology (clichee, laser or ink jet) and production line_ 

_Slight change in the layout can be possible but this does not affect the content of the information of the current marking. This change will be achieved without impact to product form, fit or function, as the products are equivalent with respect to physical, mechanical, quality and reliability characteristics_ 

© KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

F3099_R49_X1_330 • 8/15/2023 

11 

Metallized Polypropylene Film EMI Suppression Capacitors R49, Class X1, 330 VAC, 110ºC 

## **Marking cont.** 

## **Lead Spacing 22.5 and 27.5 mm (alternatives*) and 37.5 mm** 

**==> picture [499 x 155] intentionally omitted <==**

**----- Start of picture text -----**<br>
FRONT TOP<br>Series Dielectric  Safety  Self<br>Code Class Healing<br>Capacitance,<br>Approval  Manufacturer’s  Capacitance<br>Marks Logo Tolerance,<br>Rated Voltage<br>IEC Climatic<br>QA Number<br>Category<br>Passive<br>Flammability  Manufacturing  Date Code<br>Category Plant<br>**----- End of picture text -----**<br>


_* Differences caused by technology (clichee, laser or ink jet) and production line_ 

_Slight change in the layout can be possible but this does not affect the content of the information of the current marking. This change will be achieved without impact to product form, fit or function, as the products are equivalent with respect to physical, mechanical, quality and reliability characteristics_ 

|**Manufacturing Date Code(IEC 60062)**<br>~~re~~|**Manufacturing Date Code(IEC 60062)**<br>~~re~~|**Manufacturing Date Code(IEC 60062)**<br>~~re~~|**Manufacturing Date Code(IEC 60062)**<br>~~re~~|
|---|---|---|---|
|Y = Year, Z = Month<br>~~Pd~~<br>~~ee~~<br>~~ee~~<br>~~ee~~||||
|**Year**<br>~~ee~~|**Code**<br>~~ee~~|**Month**<br>~~ee~~|**Code**|
|2020<br>~~ee~~<br>~~a~~|M<br>~~ee~~|January<br>~~ee~~|1|
|2021<br>~~ee~~<br>~~es~~|N<br>~~ee~~|February<br>~~ee~~|2<br>~~ee~~|
|2022<br>~~es~~<br>~~**e**e~~|P|March|3|
|2023<br>~~es~~<br>~~**e**e~~|R|April|4|
|2024<br>~~**e**e~~<br>~~ee~~|S<br>~~e~~|May<br>~~e~~|5<br>~~e~~|
|2025<br>~~ee~~<br>~~ee~~|T|June|6|
|2026<br>~~ee~~<br>~~ee~~<br>~~**e**e~~|U|July|7|
|2027<br>~~ee~~<br>~~**e**e~~|V|August|8|
|2028<br>~~**e**e~~<br>~~ee~~|W<br>~~e~~|September<br>~~e~~|9<br>~~e~~|
|2029<br>~~ee~~<br>~~ee~~|X|October|O|
|2030<br>~~ee~~<br>~~ee~~<br>~~**e**e~~|A|November|N|
|2031<br>~~ee~~<br>~~**e**e~~|B|December|D|
|2032<br>~~**e**e~~<br>~~ee~~|C<br>~~e~~|~~e~~|~~e~~|
|2033<br>~~ee~~<br>~~ee~~|D|||
|2034<br>~~ee~~<br>~~ee~~<br>~~**e**e~~|E|||
|2035<br>~~ee~~<br>~~**e**e~~|F|||
|2036<br>~~**e**e~~<br>~~ee~~|H<br>~~e~~|~~e~~|~~e~~|
|2037<br>~~ee~~<br>~~ee~~|J|||
|2038<br>~~ee~~<br>~~ee~~<br>~~ee~~|K<br>|||
|2039<br>~~ee~~<br>~~ee~~|L<br>|||
|2040<br>~~eei~~|M<br>~~i~~|~~i~~|~~i~~|



© KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

F3099_R49_X1_330 • 8/15/2023 

12 

Metallized Polypropylene Film EMI Suppression Capacitors R49, Class X1, 330 VAC, 110ºC 

## **Packaging Quantities** 

**==> picture [542 x 396] intentionally omitted <==**

**----- Start of picture text -----**<br>
Standard<br>Lead Spacing Thickness  Height Length Bulk Bulk Large Reel Ammo<br>Reel<br>(mm) (mm) (mm) (mm) Short Leads Long Leads ø 500 mm Taped<br>ø 355 mm<br>5.0 11.0 18.0 2,000 1,000 600 1,250 800<br>6.0 12.0 18.0 1,750 900 500 1,000 680<br>6.0 17.5 18.0 1,000 700 500 1,000 680<br>15 8.5 14.5 18.0 1,000 500 300 700 440<br>10.0 16.0 18.0 750 500 300 600 380<br>11.0 19.0 18.0 450 350 - 500 340<br>13.0 12.0 18.0 750 490 200 480 280<br>6.0 15.0 26.5 805 500 – 700 464<br>7.0 16.0 26.5 700 500 – 550 380<br>22.5 8.5 17.0 26.5 468 300 – 450 280<br>10.0 18.5 26.5 396 300 – 350 235<br>13.0 22.0 26.5 300 200 – 300 –<br>9.0 17.0 32.0 816 408 – 450 –<br>11.0 20.0 32.0 560 336 – 350 –<br>13.0 22.0 32.0 480 288 – 300 –<br>27.5 13.0 25.0 32.0 480 288 – – –<br>14.0 28.0 32.0 352 176 – – –<br>18.0 33.0 32.0 256 128 – – –<br>22.0 37.0 32.0 168 112 – – –<br>11.0 22.0 41.5 420 252 – – –<br>13.0 24.0 41.5 360 216 – – –<br>37.5 16.0 28.5 41.5 216 108 – – –<br>19.0 32.0 41.5 192 96 – – –<br>30.0 45.0 41.5 90 60 – – –<br>**----- End of picture text -----**<br>


© KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

F3099_R49_X1_330 • 8/15/2023 

13 

Metallized Polypropylene Film EMI Suppression Capacitors R49, Class X1, 330 VAC, 110ºC 

## **Lead Taping & Packaging (IEC 60286–2)** 

## **Figure 1 Figure 2 Lead Spacing 10 mm Lead Spacing 15 mm** 

## **Figure 3 Lead Spacing 22.5 – 27.5 mm** 

**==> picture [482 x 156] intentionally omitted <==**

**----- Start of picture text -----**<br>
P P<br>h h<br>P2<br>ød A B<br>F P1 P0 D0 P1 P2<br>A-B<br>t<br>W2<br>H0<br>W0 W1 W<br>**----- End of picture text -----**<br>


## **Taping Specifi cation** 

**==> picture [400 x 62] intentionally omitted <==**

**----- Start of picture text -----**<br>
Dimensions (mm)<br>Description Symbol Lead Space<br>10 15 22.5 27.5 Tol.<br>Fig. 1 Fig. 2 Fig. 3 Fig. 3<br>**----- End of picture text -----**<br>


|**Description**|**Symbol**|**Dimensions(mm)**|**Dimensions(mm)**|**Dimensions(mm)**|**Dimensions(mm)**|**Dimensions(mm)**|
|---|---|---|---|---|---|---|
|||Lead Space||||Tol.|
|||10|15|22.5|27.5||
|||Fig. 1|Fig. 2|Fig. 3|Fig. 3||
||||||||
|Lead wire diameter|d|0.6|0.6–0.8|0.8|0.8|±0.05|
|Taping lead space|P|25.4|25.4|38.1|38.1|±1|
|Feed hole lead space *|P0|12.7|12.7|12.7|12.7|±0.2 **|
|Centering of the lead wire|P1|7.7|5.2|7.8|5.3|±0.7|
|Centering of the body|P2|12.7|12.7|19.05|19.05|±1.3|
|Lead spacing (pitch) ***|F|10|15|22.5|27.5|+0.6/−0.1|
|Component alignment|∆h|0|0|0|0|±2|
|Height of component<br>from tape center|H0****|18.5|18.5|18.5|18.5|±0.5|
|Carrier tape width|W|18|18|18|18|+1/−0.5|
|Hold down tape width|W0|9|10|10|10|Minimum|
|Hole position|W1|9|9|9|9|±0.5|
|Hold down tape position|W2|3|3|3|3|Maximum|
|Feed hole diameter|D0|4|4|4|4|±0.2|
|Total tape thickness|t|0.7|0.7|0.7|0.7|±0.2|



- _15 mm also available_ 

- _** Maximum of 1 mm on 20 lead spaces_ 

- _*** Pitches 15 mm and 10 mm taped to 7.5 mm (crimped leads) available upon request_ 

_**** H0 = 16.5 mm is available upon request_ 

© KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

F3099_R49_X1_330 • 8/15/2023 

14 

Metallized Polypropylene Film EMI Suppression Capacitors R49, Class X1, 330 VAC, 110ºC 

## **Lead Taping & Packaging (IEC 60286–2) cont.** 

## **Ammo Specifi cations** 

|**Dimensions(mm)**|**Dimensions(mm)**|**Dimensions(mm)**|
|---|---|---|
|**H**|**W**|**T**|
|360|340|59|



## **Reel Specifi cations** 

||**Dimensions(mm)**|**Dimensions(mm)**|**Dimensions(mm)**|
|---|---|---|---|
|**Reel Size**|**D**|**H**|**W**|
|Standard|355|30|55 Maximum|
|Large|500|25||



**==> picture [6 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
D<br>**----- End of picture text -----**<br>


**==> picture [129 x 149] intentionally omitted <==**

**----- Start of picture text -----**<br>
H<br>W<br>T<br>**----- End of picture text -----**<br>


**==> picture [216 x 149] intentionally omitted <==**

**----- Start of picture text -----**<br>
H<br>W<br>**----- End of picture text -----**<br>


© KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

F3099_R49_X1_330 • 8/15/2023 

15 

Metallized Polypropylene Film EMI Suppression Capacitors R49, Class X1, 330 VAC, 110ºC 

## 

## **Disclaimer** 

YAGEO Corporation and its affi  liates do not recommend the use of commercial or automotive grade products for high reliability applications or manned space fl ight. 

All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. 

Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. 

Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. 

Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not be required. 

Additional information about production site flexibility can be found <here> 

_KEMET is a registered trademark of KEMET Electronics Corporation._ 

© KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

F3099_R49_X1_330 • 8/15/2023 

16