R2016A-27.120-10-F-1010-X1-TR

**AUTOMOTIVE GRADE SURFACE MOUNT CRYSTAL** 

Page 1 of 4 

## **R2016A-27.120-10-F-1010-X1-TR** 

- **IATF 16949 Production Line Certified** 

- **Reliability Testing per AEC-Q200** 

## • **SPECIFICATIONS** 

|**PARAMETER**|**VALUE**|
|---|---|
|NOMINAL FREQUENCY|27.120 MHz|
|MODE OF OSCILLATION|Fundamental|
|FREQUENCY TOLERANCE AT 25°C|±10ppm max|
|FREQUENCY STABILITY OVER TEMPERATURE|±10ppm max|
|OPERATING TEMPERATURE RANGE|-40°C to +125°C|
|OPERABLE TEMPERATURE RANGE|-40°C to +100°C|
|STORAGE TEMPERATURE RANGE|-55°C to +125°C|
|AGING|±2ppm firstyear max|
|LOAD CAPACITANCE|10pF|
|EQUIVALENT SERIES RESISTANCE|100max|
|SHUNT CAPACITANCE|3.5pF max|
|DRIVE LEVEL|50µW typ,200µw max|
|INSULATION RESISTANCE|500 Mmin@DC 100V|



Photo is not actual part 

## • **MECHANICAL SPECIFICATION** 

## • **CARRIER TAPE DIMENSIONS** 

**NOTE: REFER TO EIA-481 FOR DIMENSIONS** 

## • **PACKAGING** 

> 1a#s§$ ~~8~~ 178 mm REEL DIAMETER 8 mm TAPE WIDTH, 4 mm PITCH _ QUANTITY: 3000 PIECES PER REEL Sy(0.0e6)S ‘|bl 37vu 3 coyce— J$1 0.92 —""T9.028] he [0.035] IN ACCORDANCE WITH EIA-481 **Note: According to ceramic base availability the Chamfer location could be on a different pin. However, the Chamfer’s location does not influence the electrical performance of the crystal.** 

RALTRON ELECTRONICS ▪ 10400 N.W. 33[r d  ] STREET ▪ Miami, Florida 33172 ▪ U.S.A. Telephone: 305-593-6033 ▪  Fax: 305-594-3973  ▪  e-mail: sales@raltron.com  ▪  web site: http://www.raltron.com 

Page 2 of 4 

## **AUTOMOTIVE GRADE SURFACE MOUNT CRYSTAL** 

## **R2016A-27.120-10-F-1010-X1-TR** 

## • **REFLOW PROFILE** 

**==> picture [373 x 345] intentionally omitted <==**

**----- Start of picture text -----**<br>
||||
|---|---|---|
|tP|
|TP|
|Critical Zone|
|Ramp-up|TL to TP|
|TL|
|tL|
|TSMAX|
|Temp.|
|[°C]|Ramp-down|
|TSMIN|
|tS Preheat|
|yr|
|Time [s]|
|t[25°C] to Peak|
|Reflow profile|
|Temperature Min Preheat|TSMIN|150°C|
|Temperature Max Preheat|TSMAX|200°C|
|Time (TSMIN to TSMAX)|tS|60-180 sec|
|Temperature|TL|217°C|
|Peak Temperature|TP|260°C|
|Ramp-up rate|RUP|3°C/s max|
|Ramp-down rate|RDOWN|6°C/s max|
|Time within 5°C of Peak Temperature|tP|10 sec|
|Time t[25°C] to Peak Temperature|t[25°C] to Peak|480 sec|
|Time|tL|60-150 sec|

**----- End of picture text -----**<br>


## • **ENVIRONMENTAL** 

**==> picture [472 x 195] intentionally omitted <==**

**----- Start of picture text -----**<br>
||||||||||
|---|---|---|---|---|---|---|---|---|
|PARAMETER|VALUE|
|MOISTURE SENSITIVITY LEVEL|1|
|RoHS|Compliant|
|REACH SVHC|Compliant|
|HALOGEN-FREE|Compliant|Compliant|
|ESD CLASSIFICATION LEVEL|N/A|
|TERMINATION FINISH|Au|
|————_—|=|
|RALTRON ELECTRONICS|▪|10400 N.W. 33|[r d  ]|STREET|▪|Miami, Florida 33172|▪|U.S.A.|
|Telephone: 305-593-6033 ▪  Fax: 305-594-3973  ▪  e-mail: sales@raltron.com  ▪  web site: http://www.raltron.com|

**----- End of picture text -----**<br>


**AUTOMOTIVE GRADE SURFACE MOUNT CRYSTAL** 

Page 3 of 4 

## **R2016A-27.120-10-F-1010-X1-TR** 

## • **MARKING** 

R27.12 xKEyw 

x – 1 or 2 digits as Internal Production ID code y – Year code w – Week code 

|**YEAR CODE**|**YEAR CODE**|
|---|---|
|**Year**|**Code**|
|2018|8|
|2019|9|
|2020|0|
|2021|1|
|2022|2|
|2023|3|
|2024|4|
|2025|5|
|2026|6|
|2027|7|
|2028|8|
|2029|9|



|**ALPHA WEEK CODE TABLE**|**ALPHA WEEK CODE TABLE**|**ALPHA WEEK CODE TABLE**|**ALPHA WEEK CODE TABLE**|**ALPHA WEEK CODE TABLE**|**ALPHA WEEK CODE TABLE**|
|---|---|---|---|---|---|
|**Week**|**Code**|**Week**|**Code**|**Week**|**Code**|
|1<br>a<br>2<br>b<br>3<br>c<br>4<br>d<br>5<br>e<br>6<br>f<br>7<br>g<br>8<br>h<br>9<br>i<br>10<br>j<br>11<br>k<br>12<br>l<br>13<br>m<br>14<br>n<br>15<br>o<br>16<br>p<br>17<br>q<br>18<br>r||19<br>s<br>20<br>t<br>21<br>u<br>22<br>v<br>23<br>w<br>24<br>x<br>25<br>y<br>26<br>z<br>27<br>A<br>28<br>B<br>29<br>C<br>30<br>D<br>31<br>E<br>32<br>F<br>33<br>G<br>34<br>H<br>35<br>I<br>36<br>J||37<br>K<br>38<br>L<br>39<br>M<br>40<br>N<br>41<br>O<br>42<br>P<br>43<br>Q<br>44<br>R<br>45<br>S<br>46<br>T<br>47<br>U<br>48<br>V<br>49<br>W<br>50<br>X<br>51<br>Y<br>52<br>Z||



## • **APPROVAL** 

DRAWN BY: KJ, March 21, 2024 APPROVED BY: JI, March 21, 2024 ~~————~~ REVISION: A, Initial Release Raltron Electronics / RAMI Technology USA, LLC, including its affiliates, employees, agents and other persons acting on  its behalf (collectively Raltron/RAMI Tech), disclaim any and all liability for any errors or inaccuracies contained in this data sheet.  While Raltron/RAMI Tech has made every reasonable effort ensure the accuracy of all product information, specifications and data contained herein, Raltron/RAMI Tech does not guarantee that the information is accurate, reliable or current.   The product information is provided only for reference purposes only and is subject to change, correction or revision, at any time without notice.  Raltron/RAMI Tech does not assume any liability arising out of an application or use of any product described herein and disclaims any warranties expressed or implied.  The user of products in such applications shall assume all risks of such use and will agree to hold Raltron/RAMI Tech, harmless against all damages. Copyright © 2016, Raltron Electronics / RAMI Technology USA, LLC.  All rights reserved. No part of this document may be reproduced in any form without the prior written permission of Raltron Electronics / RAMI Technology USA, LLC. 

RALTRON ELECTRONICS ▪ 10400 N.W. 33[r d  ] STREET ▪ Miami, Florida 33172 ▪ U.S.A. Telephone: 305-593-6033 ▪  Fax: 305-594-3973  ▪  e-mail: sales@raltron.com  ▪  web site: http://www.raltron.com 

## **AUTOMOTIVE GRADE SURFACE MOUNT CRYSTAL** 

Page 4 of 4 

## **R2016A-27.120-10-F-1010-X1-TR** 

The process of manufacturing R2016A series of Automotive Grade Surface Mount Microprocessor Crystals is performed by using **Advanced Product Quality Planning (APQP)** . This technique defines and establishes the following actions: 

- AEC-Q200 Qualified. 

• Product design activities communicating special characteristics to the process design activity, prior to design release, linking the DFMEA to PFMEA. 

• Plan, acquire and install appropriate process equipment and tooling based on design tolerances provided by the customer. – CPPD (Collaborative Product Process Design) 

• Assembly personnel communicating suggestions on better ways to assemble a product prior to the completion of the design of the product. – DFA/M (Design for Assembly and Manufacturing) 

• Manufacturing or Process Engineering establishing adequate Quality Controls for features of a product or parameters of a process, which still risk potential failure. – Control Plan Methodology 

• Performing Stability and Capability studies on special characteristics to understand the variation present and predict future performance. – SPC (Statistical Process Control and Process Capability) 

Request for **Production Part Approval Process (PPAP)** documentation must be requested at time of order placement. Requests for part approval will be supported in official PPAP format and with documented results as requested at time of order placement. Actual measurements are taken of the parts produced and are used to complete the various test sheets of PPAP. 

## ● **NOTICE** 

If you intend to use our product referenced above in an automotive application that may result in loss of life or assets, please do not fail to advise us of your intention beforehand. The use of the listed part in those applications is not covered by warranty, and we will not be held accountable for any liability claims. We reserve the right to not supply parts in those circumstances. 

RALTRON ELECTRONICS ▪ 10400 N.W. 33[r d  ] STREET ▪ Miami, Florida 33172 ▪ U.S.A. Telephone: 305-593-6033 ▪  Fax: 305-594-3973  ▪  e-mail: sales@raltron.com  ▪  web site: http://www.raltron.com