R15-2012-23-5024-WTL

**R15 - 2 CO, 3 CO** industrial relays of small dimensions 

|©<br>en|&<br>_San|||
|---|---|---|---|
|Contact data<br>**R15 - 2 CO**<br>©<br>en<br>Therv|&<br>_ San<br>Wis|**R15 - 3 CO**||
|Number and type of contacts||||
|Contact material||||
|Rated / max. switchingvoltage|||AC|
|Min. switching voltage||||
|Rated load (capacity)|||AC1|
||||AC15|
||||AC3|
||||DC1|
||||DC13|
|Min. switchingcurrent||||
|Max. inrush current||||
|Rated current||||
|Max. breakingcapacity|||AC1|
|Min. breaking capacity||||
|Contact resistance||||
|Max. operating frequency||||
|• at rated load|||AC1|
|• no load||||
|Coil data||||
|Rated voltage||50/60 Hz|50/60 HzAC|
||||DC|
|Must release voltage||||
|Operatingrange of supplyvoltage||||
|Rated power consumption|||AC|
||||DC|
|Insulationaccordingto PN-EN 60664-1|to PN-EN 60664-1|||
|Insulation rated voltage||||
|Rated surge voltage||||
|Overvoltage category||||
|Insulationpollution degree||||
|Dielectric strength||||
|• between coil and contacts||||
|• contact clearance||||
|•pole -pole||||
|Contact - coil distance||• clearance||
|||• creepage||



General data Operating / release time (typical values) Electrical life • resistive AC1 • cosφ Mechanical life (cycles) Dimensions (L x W x H) Weight Ambient temperature • storage • operating Cover protection category Environmental protection Shock resistance Vibration resistance Solder bath temperature Soldering time 

• Relays of general application • For plug-in sockets: 35 mm rail mount acc. to PN-EN 60715; on panel mounting; solder terminals • Contacts AgNi • Coils AC and DC • WT (mechanical indicator + lockable front test button) - standard features of relays in cover, for plug-in sockets. Relays may be provided with the test buttons (no latching) and plugs - page 7 • **Have obtained LR Type Approval Certificate (Lloyd’s Register)** • Recognitions, certifications, directives: RoHS, AUCOTEAM GmbH Berlin - railroad standard, COM & HE LEO 

2 CO, 3 CO **AgNi** , AgNi/Au flash gold plating, AgNi/Au hard gold plating 250 V / 440 V 10 V  AgNi,  10 V  AgNi/Au flash gold plating 5 V  AgNi/Au hard gold plating 10 A / 250 V AC 10 A / 277 V AC  UL 508 3 A / 120 V 1,5 A / 240 V  (B300) 370 W  (single-phase motor; 0,5 HP / 240 V AC  UL 508) 10 A / 24 V DC   (see Fig. 3) 0,22 A / 120 V 0,1 A / 250 V  (R300) 5 mA 20 A 10 A 2 500 VA 0,3 W  AgNi,  0,3 W  AgNi/Au flash gold plating 0,05 W  AgNi/Au hard gold plating ≤ 100 mΩ 1 200 cycles/hour 12 000 cycles/hour 

6 ... 240 V 6 ... 220 V AC: ≥ 0,15 Un DC: ≥ 0,1 Un see Tables 1, 2 2,8 VA 50 Hz 2,5 VA 60 Hz 1,5 W 

250 V AC 2 500 V 1,2 / 50 µs III 3 

2 500 V AC type of insulation: basic 1 500 V AC type of clearance: micro-disconnection 2 000 V AC type of insulation: basic ≥ 3 mm ≥ 4,2 mm 

AC: 12 ms / 10 ms DC: 18 ms / 7 ms 

> 2 x 10[5] 10 A, 250 V AC see Fig. 2 > 2 x 10[7] 35 x 35 x 54,4 mm 83 g -40...+85[o] C AC: -40...+55[o] C DC: -40...+70[o] C IP 40 PN-EN 60529 RTI PN-EN 116000-3 10 g 5 g 10...150 Hz max. 270[o] C max. 5 s 

The data in bold type relate to the standard versions of the relays. 

**1** 

**www.relpol.com.pl** 

**Export Sales Department** phone +48 68 47 90 832, 951 • e-mail: export@relpol.com.pl 

**R15 - 2 CO, 3 CO** industrial relays of small dimensions 

**==> picture [41 x 40] intentionally omitted <==**

**Dimensions** - plug-in version (WT), with lockable front test button type T 

**Dimensions** - plug-in version, with test button (no latching) or with plug (no manual operation) 

**==> picture [463 x 283] intentionally omitted <==**

**----- Start of picture text -----**<br>
2 CO 2 CO<br>35 13 54,4 35 13 54,4<br>3 CO 3 CO<br>35 13 54,4 35 13 54,4<br>Test buttons R15-M404  and  plugs R15-M203  need<br>to ordered saparately. They substitute buttons type T.<br>To exchange by Customer themselves. Information<br>on test buttons (no latching) and plugs - page 7.<br>35 35<br>35 35<br>**----- End of picture text -----**<br>


## **Mounting** 

**Relays R15 - 2 CO, 3 CO are offered in versions** : • for plug-in sockets. **With WT features as standard** ( **W** - mechanical indicator + **T** - lockable front test button). In these relays is **possibility self-exchange of button type T for test button R15-M404** (no latching) **or on plug R15-M203** (no manual operation). The buttons **R15-M404** and the plugs **R15-M203 need to ordered saparately** . 

Relays **R15 - 2 CO** are designed for: • screw terminals plug-in sockets **PZ8** with clip **PZ11 0031** , 35 mm rail mount acc. to PN-EN 60715 or on panel mounting with two M3 screws • screw terminals plug-in sockets **GZU8** with clip **GZU 1052** , 35 mm rail mount acc. to PN-EN 60715 • screw terminals plug-in sockets **GZ8** with clip **GZ 1050** , on panel mounting with two M3 screws • screw terminals plug-in sockets **GZP8** with clip **GZP-0054** , 35 mm rail mount acc. to PN-EN 60715 or on panel mounting with two M3 screws • solder terminals sockets **GOP8** with clip **R159 1051** and spring clamp **R15 5922** . 

Relays **R15 - 3 CO** are designed for: • screw terminals plug-in sockets **PS11** and **PZ11** with clip **PZ11 0031** , 35 mm rail mount acc. to PN-EN 60715 or on panel mounting with two M3 screws • screw terminals plug-in sockets **GZU11** with clip **GZU 1052** , 35 mm rail mount acc. to PN-EN 60715 • screw terminals plug-in sockets **GZ11** with clip **GZ 1050** , on panel mounting with two M3 screws • screw terminals plug-in sockets **GZP11** with clip **GZP-0054** , 35 mm rail mount acc. to PN-EN 60715 or on panel mounting with two M3 screws • solder terminals sockets **GOP11** with clip **R159 1051** and spring clamp **R15 5922** . 

**2** 

**www.relpol.com.pl** 

**Export Sales Department** phone +48 68 47 90 832, 951 • e-mail: export@relpol.com.pl 

**R15 - 2 CO, 3 CO** industrial relays of small dimensions 

**==> picture [41 x 40] intentionally omitted <==**

**==> picture [226 x 219] intentionally omitted <==**

**----- Start of picture text -----**<br>
AC1<br>**----- End of picture text -----**<br>


**==> picture [223 x 219] intentionally omitted <==**

**----- Start of picture text -----**<br>
N  - electrical life<br>at AC1<br>**----- End of picture text -----**<br>


**==> picture [125 x 5] intentionally omitted <==**

**----- Start of picture text -----**<br>
2 CO 3 CO<br>**----- End of picture text -----**<br>


**==> picture [191 x 24] intentionally omitted <==**

**----- Start of picture text -----**<br>
Note : the indicated polarity of the supply refers to the relays<br>with extra equipment  D  - surge suppression element (diode)<br>- for DC coils only.<br>**----- End of picture text -----**<br>


**3** 

**www.relpol.com.pl** 

**Export Sales Department** phone +48 68 47 90 832, 951 • e-mail: export@relpol.com.pl 

**R15 - 2 CO, 3 CO** industrial relays of small dimensions 

**Coil data** - DC voltage version 

Table 1 

|4,8<br>**9,6**<br>**19,2**<br>38,4<br>48,0<br>88,0<br>96,0<br>**176,0**<br>6,6<br>**13,2**<br>**26,4**<br>52,8<br>66,0<br>121,0<br>132,0<br>**242,0**<br>± 10%<br>**± 10%**<br>**± 10%**<br>± 10%<br>± 10%<br>± 10%<br>± 10%<br>**± 10%**<br>1006<br>**1012**<br>**1024**<br>1048<br>1060<br>1110<br>1120<br>**1220**<br>6<br>**12**<br>**24**<br>48<br>60<br>110<br>120<br>**220**<br>28<br>**110**<br>**430**<br>1 750<br>2 700<br>9 200<br>11 000<br>**37 000**<br>Coil operating range<br>V DC<br>min.(at 20 °C)<br>max.(at 70 °C)<br>Acceptable<br>resistance<br>Rated voltage<br>V DC<br>Coil resistance<br>at 20 °C<br>Ω<br>Coil code<br>~~|~~<br>~~—~~<br>~~eT~~<br>~~—SF~~<br>~~———~~<br>~~———~~<br>~~—— ————E~~<br>~~a~~|
|---|
|The data in bold type relate to the standard versions of the relays.|
|**Coil data**- AC 50/60 Hz voltage version<br>Table 2|
|4,8<br>9,6<br>**19,2**<br>38,4<br>48,0<br>92,0<br>96,0<br>176,0<br>**184,0**<br>192,0<br>6,6<br>13,2<br>**26,4**<br>52,8<br>66,0<br>126,5<br>132,0<br>242,0<br>**253,0**<br>264,0<br>± 15%<br>± 15%<br>**± 15%**<br>± 15%<br>± 15%<br>± 15%<br>± 15%<br>± 15%<br>**± 15%**<br>± 15%<br>5006<br>5012<br>**5024**<br>5048<br>5060<br>5115<br>5120<br>5220<br>**5230**<br>5240<br>6<br>12<br>**24**<br>48<br>60<br>115<br>120<br>220<br>**230**<br>240<br>4,3<br>18,5<br>**75**<br>305<br>475<br>1 840<br>1 910<br>6 980<br>**7 080**<br>7 760<br>The data in bold type relate to the standard versions of the relays.<br>Coil operating range<br>V AC<br>min.(at 20 °C)<br>max.(at 55 °C)<br>Acceptable<br>resistance<br>Rated voltage<br>V AC<br>Coil resistance<br>at 20 °C<br>Ω<br>Coil code<br>~~oe~~<br>~~|~~<br>~~**—**—~~<br>~~TT~~<br>~~SE~~<br>~~ee eee~~<br>~~SSS~~<br>~~——~~<br>~~a~~<br>~~———~~<br>~~—————~~<br>~~SO~~<br>~~—~~|



**4** 

**www.relpol.com.pl** 

**Export Sales Department** phone +48 68 47 90 832, 951 • e-mail: export@relpol.com.pl 

**R15 - 2 CO, 3 CO** industrial relays of small dimensions 

**==> picture [41 x 40] intentionally omitted <==**

## **Ordering codes** 

**==> picture [463 x 248] intentionally omitted <==**

**----- Start of picture text -----**<br>
Cover protection<br>category<br>Type Contact  Number and type  Connection  Coil code Additional<br>material of contacts mode features<br>— — — —<br>R 1 5<br>Contact material<br>20 21  - AgNi/Au flash gold plating-  AgNi see Tables 1, 2  page 4<br>23  - AgNi/Au hard gold plating<br>Connection mode<br>Number and type of contacts 3  - fo r plug-in sockets<br>12  - 2 CO<br>13  - 3 CO<br>Cover protection category<br>2  - in cover, IP 40 versi on<br>Additional features  ❶<br>WT  - mechanical indicator + lockable front test button<br>WTL   - mechanical indicator + lockable front test button + light indicator (LED diode)<br>WTD   - mechanical indicator + lockable front test button + surge suppression element (diode)<br>**----- End of picture text -----**<br>


**WT** - mechanical indicator + lockable front test button **WTL** - mechanical indicator + lockable front test button + light indicator (LED diode) **WTD** - mechanical indicator + lockable front test button + surge suppression element (diode) **WTLD** - mechanical indicator + lockable front test button + light indicator (LED diode) + surge suppression element (diode) **WTV** - mechanical indicator + lockable front test button + surge suppression element (varistor) **WTLV** - mechanical indicator + lockable front test button + light indicator (LED diode) + surge suppression element (varistor) 

- ❶ **WT** - standard features of relays for plug-in sockets. **WTD, WTLD** - only for DC coils, **WTV, WTLV** - only for AC coils 

**Test buttons (no latching) and plugs** need to ordered saparately. They substitute buttons type T. To exchange by Customer themselves. Information on test buttons (no latching) and plugs - page 7. 

- Button R15-M404-A - orange colour (AC coils) 

- Button R15-M404-D - green colour (DC coils) 

- Plug R15-M203-A - orange colour (AC coils) 

- Plug R15-M203-D - green colour (DC coils) 

## **Note:** 

While the relay operates, the test button of the **T** type becomes heated. In order to push the test button manually, you should first turn the supply voltage off, and wait some time until the button becomes colder (or push the button immediately using a protective glove or an insulated tool). The button shall be pushed smoothly and quickly. The normally open contacts are closed with the button for the time during which the button is pushed. Releasing the button opens the normally open contacts. Normally open contacts may be closed with the blocking function of the button (it shall be turned by 90°). When the button is turned back, the normally open contacts are opened. 

For relays with additional features **D** - surge suppression element (diode) (versions WTD and WTLD) - fixed supply polarity compulsory for the DC load of coils: +A1(2) / -A2(7) for R15 - 2 CO and +A1(2) / -A2(10) for R15 - 3 CO. The polarity is indicated on the relay cover. For other versions of the relays with DC coils any polarity is possible. 

Examples of ordering codes: 

**R15-2012-23-1024-WT** relay **R15** , for plug-in sockets, two changeover contacts, contact material AgNi, coil voltage 24 V DC, with mechanical indicator and lockable front test button, in cover IP 40 **R15-2013-23-5230-WTL** relay **R15** , for plug-in sockets, three changeover contacts, contact material AgNi, coil voltage 230 V AC 50/60 Hz, with mechanical indicator and lockable front test button and light indicator (LED diode), in cover IP 40 

**5** 

**www.relpol.com.pl** 

**Export Sales Department** phone +48 68 47 90 832, 951 • e-mail: export@relpol.com.pl 

**Additional features for industrial relays** 

Industrial relays for plug-in sockets: R2N, R3N, R4N, R15 - 2 CO ❷ , R15 - 3 CO ❷ **with WT features as standard** ( **W** - mechanical indicator + **T** - lockable front test button). **Detailed information** on additional features of individual relays can be found in the data sheets on the side of ”Ordering codes”. 

## **Note:** 

While the relay operates, the test button of the **T** type becomes heated. In order to push the test button manually, you should first turn the supply voltage off, and wait some time until the button becomes colder (or push the button immediately using a protective glove or an insulated tool). The button shall be pushed smoothly and quickly. The normally open contacts are closed with the button for the time during which the button is pushed. Releasing the button opens the normally open contacts. Normally open contacts may be closed with the blocking function of the button (it shall be turned by 90°). When the button is turned back, the normally open contacts are opened. 

|**Type **❶<br>**W**<br>**T**<br>**L**<br>**D**<br>**V**<br>**K**|mechanical indicator<br>lockable front test button,<br>orange colour - AC coils,<br>green colour - DC coils<br>light indicator (LED diode),<br>located inside the relay<br>surge suppression element (diode)<br>- only for DC coils<br>surge suppression element (varistor)<br>- only for AC coils<br>test button without block function<br>**Description**|**For industrial relays**<br>R2N, R3N, R4N,<br>(R15 - 2 CO, 3 CO❷)<br>R2N, R3N, R4N,<br>(R15 - 2 CO, 3 CO❷)<br>R2N, R3N, R4N, RY2,<br>(R15 - 2 CO, 3 CO, 4 CO❷)<br>RUC, RUC-M<br>R2N, R3N, R4N, RY2,<br>(R15 - 2 CO, 3 CO, 4 CO❷)<br>(R15 - 2 CO, 3 CO❷)<br>(R15 - 4 CO❷),<br>RUC|
|---|---|---|



❶ Available combinations: 

**WT, WTL, WTD, WTLD** - in relays R2N, R3N, R4N for plug-in sockets 

**L, D, LD** - in relays RY2 for plug-in sockets 

**WT, WTL, WTD, WTLD, WTV, WTLV** - in relays R15 - 2 CO, 3 CO for plug-in sockets 

**K, L, D, KL, KD, LD, KLD** - in relays R15 - 4 CO for plug-in sockets 

**K, L, KL** - in relays RUC 

**L** - in relays RUC-M 

❷ Voltage versions, in covers 

**==> picture [161 x 141] intentionally omitted <==**

**----- Start of picture text -----**<br>
Test buttons type T R15 - 2 CO, 3 CO<br>orange<br>| a) – AC coils<br>i “a? elpo!<br>,<br>green  | a?elpol<br>– DC coils<br>**----- End of picture text -----**<br>


**6** 

**www.relpol.com.pl** 

**Export Sales Department** phone +48 68 47 90 832, 951 • e-mail: export@relpol.com.pl 

**Test buttons (no latching) and plugs** 

**Test buttons (no latching)** are recommended for R2N...WT, R3N...WT, R4N...WT, R15...WT 2 CO, R15...WT 3 CO relays - **for appli cations that do not allow permanent contact latching** . By manual operation (pressing the button) relay contacts can get switched for as long time as long the button is pressed. Contacts return to initial position as soon as pressure is released from the button. Those operations can be done while the coil is deenergized ❸ . 

Button **R4P-0001** or **R15-M404** can be easily inserted by the Customer after removal of button type **T** (see Fig. 2). Button type **T** can be removed with screw driver as shown on Fig. 1. 

❸ While the relay operates, the test button becomes heated. In order to push the test button manually, you should first turn the supply voltage off, and wait some time until the button becomes colder (or push the button immediately using a protective glove or an insulated tool). The button shall be pushed smoothly and quickly. 

**==> picture [21 x 163] intentionally omitted <==**

**----- Start of picture text -----**<br>
Fig. 1<br>Fig. 2<br>**----- End of picture text -----**<br>


**Dimensions** - test button **R4P-0001** for **R2N...WT, R3N...WT, R4N...WT** 

**Dimensions** - test button **R15-M404** for **R15...WT 2 CO, R15...WT 3 CO** 

**==> picture [112 x 24] intentionally omitted <==**

**----- Start of picture text -----**<br>
Types of buttons:<br>R4P-0001-A  - orange colour (AC coils)<br>R4P-0001-D  - green colour (DC coils)<br>**----- End of picture text -----**<br>


**==> picture [114 x 24] intentionally omitted <==**

**----- Start of picture text -----**<br>
Types of buttons:<br>R15-M404-A  - orange colour (AC coils)<br>R15-M404-D  - green colour (DC coils)<br>**----- End of picture text -----**<br>


**Plugs R4W-0003** or **R15-M203** can substitute button type **T if manual operation (latching and testing) is not allowed** . Changing button type **T** for plug can be done by Customer themselves in the same way as changing button type **T** for button (no latching). 

## **Dimensions** - plug **R4W-0003** for **R2N...WT, R3N...WT, R4N...WT** 

**Dimensions** - plug **R15-M203** for **R15...WT 2 CO, R15...WT 3 CO** 

**==> picture [114 x 24] intentionally omitted <==**

**----- Start of picture text -----**<br>
Types of plugs:<br>R4W-0003-A  - orange colour (AC coils)<br>R4W-0003-D  - green colour (DC coils)<br>**----- End of picture text -----**<br>


**==> picture [114 x 24] intentionally omitted <==**

**----- Start of picture text -----**<br>
Types of plugs:<br>R15-M203-A  - orange colour (AC coils)<br>R15-M203-D  - green colour (DC coils)<br>**----- End of picture text -----**<br>


**7** 

**www.relpol.com.pl** 

**Export Sales Department** phone +48 68 47 90 832, 951 • e-mail: export@relpol.com.pl 

## **Plug-in sockets and accessories** 

**==> picture [382 x 708] intentionally omitted <==**

**----- Start of picture text -----**<br>
PZ8  ❶ Connection diagram Dimensions<br>For R15 - 2 CO © © ® ®<br>24 22 12 14<br>Screw terminals<br>Max. tightening moment<br>for the terminal: 0,7 Nm 0<br>35 mm rail mount   | [<br>acc. to PN-EN 60715<br>68 le<br>or on panel mounting 7 2<br>68,2 x 38 x 24,2 mm<br>Two poles<br>10 A, 250 V AC<br>7” Qe AQ 2 1) At i<br><6 S@-S Ta<br>pS SINS<br>\ <ms We<br>Accessories PZ11 0031<br>GZU8 Connection diagram  Adaptor Dimensions<br>For R15 - 2 CO 22.5) 12(4)<br>Screw terminals<br>Max. tightening moment<br>for the terminal: 0,7 Nm<br>35 mm rail mount<br>acc. to PN-EN 60715 6! 3 Ae @| GAH<br>82 x 35,5 x 25,7 mm Be of 3<br>Two poles _———— o|<br>10 A, 300 V AC<br>am dn |<br>- 2a<br>[<br>=~ Accessories GZU 1052<br>GZ8 Connection diagram  Mounting   Dimensions<br>dimensions<br>For R15 - 2 CO<br>22(5) 12(4)<br>Screw terminals   24 (6) 143) H<br>Max. tightening moment<br>for the terminal: 0,7 Nm<br>On panel mounting<br>| 0 |<br>82,8 x 35,5 x 22,5 mm<br>Two poles 7, Q 22 18<br>10 A, 300 V AC 8 1 a<br>21@)|  |110) co 8<br>“ Sa ' g “boas<br>Accessories GZ 1050<br>GZP8 Connection diagram Dimensions<br>For R15 - 2 CO 24 22 12 14<br>Screw terminals<br>Max. tightening moment<br>for the terminal: 0,5 Nm<br>35 mm rail mount<br>Ul}<br>acc. to PN-EN 60715<br>O |@®<br>or on panel mounting Q > N<br>73 x 38,2 x 27,2 mm<br>Two poles ee ||<br>12 A, 300 V AC #2 EeaD 8<br>:<br>= A2 A2 21 71 At ( i) Time module COM3 oy<br>grant ce \<br>we / / Lod<br>Accessories GZP-0054 GZP-0035<br>**----- End of picture text -----**<br>


- ❶ Have obtained LR Type Approval Certificate (Lloyd’s Register). 

**8** 

**www.relpol.com.pl** 

**Export Sales Department** phone +48 68 47 90 832, 951 • e-mail: export@relpol.com.pl 

**Plug-in sockets and accessories** 

## **GOP8** 

## **Dimensions** 

For R15 - 2 CO 

Solder terminals 47,2 x 32 x 22 mm Two poles 10 A, 250 V AC 

**==> picture [38 x 9] intentionally omitted <==**

**----- Start of picture text -----**<br>
PS11  ❶<br>**----- End of picture text -----**<br>


**==> picture [143 x 28] intentionally omitted <==**

**----- Start of picture text -----**<br>
Accessories R159 1051 R15 5922<br>Connection diagram<br>**----- End of picture text -----**<br>


**==> picture [46 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
Dimensions<br>**----- End of picture text -----**<br>


For R15 - 3 CO 

Screw terminals Max. tightening moment for the terminal: 0,7 Nm 35 mm rail mount acc. to PN-EN 60715 or on panel mounting 68,2 x 38 x 24,2 mm Three poles 10 A, 250 V AC 

**Accessories PZ11 0031 PZ11** ❶ **Connection diagram** For R15 - 3 CO OHO8® 32 24 21 22 12 Screw terminals Max. tightening moment for the terminal: 0,7 Nm 35 mm rail mount 3090 7{i acc. to PN-EN 60715 or on panel mounting § Q 43 68,2 x 38 x 24,2 mm 10 2 Three poles i 10 A, 250 V AC 

**==> picture [46 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
Dimensions<br>**----- End of picture text -----**<br>


## **GZU11** 

**Accessories PZ11 0031 Connection diagram Adaptor Dimensions** 

For R15 - 3 CO Screw terminals Max. tightening moment for the terminal: 0,7 Nm 35 mm rail mount acc. to PN-EN 60715 82 x 35,5 x 25,7 mm Three poles 10 A, 250 V AC 

**==> picture [100 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
Accessories GZU 1052<br>**----- End of picture text -----**<br>


❶ Have obtained LR Type Approval Certificate (Lloyd’s Register). 

**9** 

**www.relpol.com.pl** 

**Export Sales Department** phone +48 68 47 90 832, 951 • e-mail: export@relpol.com.pl 

## **Plug-in sockets and accessories** 

**==> picture [382 x 368] intentionally omitted <==**

**----- Start of picture text -----**<br>
GZ11 Connection diagram  Mounting   Dimensions<br>dimensions<br>For R15 - 3 CO<br>32(8) 22(5) 12(4)<br>Screw terminals  34(9) 24(7)]14 (3) Hy<br>Max. tightening moment<br>for the terminal: 0,7 Nm<br>On panel mounting<br>82,8 x 35,5 x 22,5 mm<br>Three poles<br>10 A, 250 V AC<br>or Q<br>= 34 (11) 216) 11(1)] ot<br>So s== “@ A2(10) AlQ) FTO<br>EF =t<br>|<br>Accessories GZ 1050<br>GZP11 Connection diagram Dimensions<br>For R15 - 3 CO 34 32 24 2 1412<br>©)<br>Screw terminals<br>Max. tightening moment<br>for the terminal: 0,5 Nm<br>35 mm rail mount<br>NE<br>acc. to PN-EN 60715<br>or on panel mounting ’ . a<br>73 x 38,2 x 27,2 mm<br>Three poles<br>12 A, 300 V AC ' ®12ot At oieBe “SYLE Ag 8; 1 @<br>a Link rm Time module COM3 y y PE<br>, A2A2 31 21 11 Al \ —~ YI<br>grail cé \ c<br>oenw" l} Se «<br>Accessories GZP-0054 GZP-0035<br>Dimensions<br>**----- End of picture text -----**<br>


**==> picture [47 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
Dimensions<br>**----- End of picture text -----**<br>


## **GOP11** 

For R15 - 3 CO Solder terminals 47,2 x 32 x 22 mm Three poles 10 A, 250 V AC 

**==> picture [144 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
Accessories R159 1051 R15 5922<br>**----- End of picture text -----**<br>


**PRECAUTIONS:** 

**1.** Ensure that the parameters of the product described in its specification provide a safety margin for the appropriate operation of the device or system and never use the product in circumstances which exceed the parameters of the product. **2.** Never touch any live parts of the device. **3.** Ensure that the product has been connected correctly. An incorrect connection may cause malfunction, excessive heating or risk of fire. **4.** In case of any risk of any serious material loss or death or injuries of humans or animals, the devices or systems shall be designed so to equip them with double safety system to guarantee their reliable operation. 

**10** 

**www.relpol.com.pl** 

**Export Sales Department** phone +48 68 47 90 832, 951 • e-mail: export@relpol.com.pl