R10-E1W2-V185

Signal Signal Relays 

**Potter & Brumfield** 

## **R10 Series Relay** 

## n **1 through 8 form C (CO) contact arrangement** 

> n **Broad range of coil options provides sensitivity ranging from 25 to 750mW** 

> n **Various contacts switch from dry circuit to 7.5 amps** 

> n **Many mounting and termination options** 

## Typical applications 

Coin changers, audio equipment, elevators, traffic controls, ultrasonic test equipment, parking toll readers. 

**==> picture [208 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
R10  R10-R  R10S   R10-T<br>**----- End of picture text -----**<br>


|~~**Approvals**~~||||**Contact ratings**(continued)|**Contact ratings**(continued)||||
|---|---|---|---|---|---|---|---|---|
|UL E29244; CSA LR15734||||Type|Load|||Cycles|
|Technical data of approved types on request.||||**UL 508**|||||
|||||P type, Au overlay Ag, bifurcated crossbar contact|||||
|~~**Contact Data**~~|||||2A, 120VAC, resistive|||100x103|
|Contact arrangement|1, 2, 3, 4, 6 and 8 form C (CO)|1, 2, 3, 4, 6 and 8 form C (CO)|||3 A, 120 VAC, resistive|||6x103|
|Rated voltage||120VAC|||3 A, 30 VDC, resistive|||100x103|
|Rated current||7.5A||L type, AuPtAg, bifurcated crossbar contact|||||
|Contact material<br>Ag, AgCdO, Au overlay Ag, AuPtAg|||||500mA, 28VDC, resistive|||6x103|
|Contact style<br>Single or bifurcated crossbar|Single or bifurcated crossbar|||Mechanical endurance               10x10||Mechanical endurance               10x106ops., except W type is 1x10||ops., except W type is 1x106ops.|
|Min. recommended contact load|||||||||
|W type, AgCdO, single contact|300mA, 12VDC||||||||
|X type, AgCdO, single contact|300mA, 12VDC|||~~**Coil Data**~~|||||
|M type, AgCdO, bifurcated contact|M type, AgCdO, bifurcated contact<br>300mA, 12VDC|||Coil voltage range|||3 to 115VDC||
|Y type, Ag, single contact|100mA, 12VDC||||||4.5mA to 20mA|4.5mA to 20mA|
|Z type, Ag, bifurcated crossbar|1mA, 12VDC||||||6 to 115VAC||
|P type, Au overlay Ag, bifurcated crossbar||dry circuit||**Coil versions, DC coil**|||||
|L type, AuPtAg, bifurcated crossbar|L type, AuPtAg, bifurcated crossbar|dry circuit||Coil|Rated|Operate|Coil|Rated coil|
|Initial contact resistance||||code|voltage|voltage|resistance|power|
|All AgCdO contact types||100mΩ|||VDC|VDC|Ω±10%|mW|
|All other contact materials and types|All other contact materials and types|50mΩ||V - standard DC voltage adjustment|||||
|Frequency of operation||360 ops./hr||1, 2 and 4 pole|1, 2 and 4 pole||||
|||||V10|3|2.25|10|900|
|**Contact ratings**||||V28|5|3.75|28|900|
|Type<br>Load||Cycles||V52|6|4.5|52|900|
|**UL 508**||||V185|12|9|185|900|
|W type, AgCdO, single contact||||V700|24|18|700|900|
|7.5A, 120VAC, resistive|7.5A, 120VAC, resistive|||V2.5K|48|36|2500|900|
|7.5A, 28VDC, resistive||||V5.8K|72|54|5800|900|
|1/8HP, 120VAC, same polarity||||V15.0K|115|86|15000|900|
|1/6HP, 240VAC, same polarity||||6 pole|||||
|X type, AgCdO, single contact||||V6|3|2.25|6|1,500|
|2A, 30VDC, resistive||100x103||V16|5|3.75|16|1,600|
|5A, 120VAC, resistive||6x103||V25|6|4.5|25|1,500|
|5A, 30VDC, resistive||100x103||V90|12|9|90|1,600|
|1/20HP, 120VAC, same polarity||1/20HP, 120VAC, same polarity||V430|24|18|430|1,400|
|1/10HP, 240VAC, same polarity||1/10HP, 240VAC, same polarity||V1.5K|48|36|1500|1,600|
|M type, AgCdO, bifurcated contact||||V3.5K|72|54|3500|1,500|
|5A, 120VAC, resistive||6x103||V9.0K|115|86|9000|1,500|
|5A, 28VDC, resistive||6x103||8 pole|||||
|Y type, Ag, single contact||||V5|3|2.25|5|1,800|
|2A, 120VAC||6x103||V14|5|3.75|14|1,800|
|2A, 28VDC||6x103||V20|6|4.5|20|1,800|
|250VA, 250VAC||30x103||V72|12|9|72|2,000|
|125VA, 125VAC||100x103||V350|24|18|350|1,700|
|Z type, Ag, bifurcated crossbar contact||||V1.25K|48|36|1250|1,900|
|3A, 120VAC||6x103||V2.8K|72|54|2800|1,900|
|3A, 28VDC||6x103||V8.0K|115|86|8000|1,700|
|2A, 30VDC||100x103||All figures are given for coil without preenergization, at ambient temperature +23°C.||||All figures are given for coil without preenergization, at ambient temperature +23°C.|



1 

Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 

08-2015, Rev. 0815 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company 

Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions 

Signal Signal Relays 

**Potter & Brumfield** 

## **R10 Series Relay** (Continued) 

|**Coil versions, DC coil**(continued)|**Coil versions, DC coil**(continued)|**Coil versions, DC coil**(continued)|||**Coil versions, DC coil**|**Coil versions, DC coil**|**Coil versions, DC coil**(continued)|||
|---|---|---|---|---|---|---|---|---|---|
|Coil|Rated|Operate|Coil|Rated coil|Coil|Rated|Operate|Coil|Rated coil|
|code<br>voltage||voltage|resistance|power|code|voltage|voltage|resistance|power|
||VDC|VDC|Ω±10%|mW||VDC|VDC|Ω±10%|mW|
|Q - special DC voltage adjustment|||||S - sensitive DC voltage adjustment (continued)||S - sensitive DC voltage adjustment (continued)|||
|1 and 2 pole|1 and 2 pole||||2 pole|||||
|Q52|5|3.1|52|500|SS110|3|2.25|110|85|
|Q110|6|4.5|110|350|SS350|5|3.75|350|75|
|Q450|12|9.2|450|350|SS500|6|4.5|500|75|
|Q1.8K|24|17.4|1,800|350|SS2.0K|12|9|2000|75|
|Q7.5K|48|36.2|7500|310|SS4.5K|18|13.5|4500|75|
|Q15.0K|72|49.5|15000|350|SS7.5K|24|18|7500|80|
|Q30.0K|115|67.5|30000|450|SS15.0K|SS15.0K<br>36|27|15000|85|
|3 and 4 pole|3 and 4 pole||||SS30.0K|SS30.0K<br>48|36|30000|80|
|Q32|5|3.8|32|800|3 and 4 pole|||||
|Q52|6|4.2|52|700|SS52|3|2.25|52|175|
|Q185|12|8.4|185|800|SS175|5|3.75|175|150|
|Q1.0K|24|17.2|1000|600|SS250|6|4.5|250|150|
|Q3.2K|48|31.1|3200|750|SS1.0K|12|9|1000|150|
|Q7.5K|72|49.3|7500|700|SS2.2K|18|13.5|2200|150|
|Q15.0K|115|67.5|15000|900|SS3.7K|24|18|3700|150|
|S - sensitive DC voltage adjustment|S - sensitive DC voltage adjustment||||SS7.5K|36|27|7500|175|
|1 and 2 pole|1 and 2 pole||||SS15.0K|SS15.0K<br>48|36|15000|150|
|S50|3|2.25|50|180||||||
|S140|5|3.75|140|180|Coil|Maximum|Operate|Coil|Pick-up|
|S200|6|4.5|200|180|code|coil current|current|resistance|coil power|
|S800|12|9|800|180||mADC|mADC|Ω±10%|mW|
|S3.2K|24|18|3200|180|J - sensitive DC current adjustment||J - sensitive DC current adjustment|||
|S13.0K|48|36|13000|180|2 pole|||||
|S28.0K|72|54|28000|190|J1.0K|45|8.5|1000|75|
|S50.0K|115|86|50000|270|J2.5K|28|5.8|2500|85|
|3 and 4 pole|3 and 4 pole||||J5.0K|20|4.1|5000|85|
|S30|3|2.25|30|300|J10.0K|14|3.1|10000|100|
|S80|5|3.75|80|350|J15.0K|11.5|2.6|15000|100|
|S110|6|4.5|110|350|J30.0K|8.3|1.7|30000|85|
|S450|12|9|450|350|4 pole|||||
|S1.8K|24|18|1800|350|J1.0K|45|13|1000|175|
|S7.5K|48|36|7500|300|J2.5K|28|8.4|2500|175|
|S16.0K|72|54|16000|350|J5.0K|20|6.2|5000|200|
|S40.0K|115|86|40000|350|J10.0K|14|4.5|10000|200|
|6 pole|||||J15.0K|11.5|3.5|15000|200|
|S20|3|2.25|20|500|J30.0K|8.3|2.5|30000|200|
|S56|5|3.75|56|500|6 pole|||||
|S80|6|4.5|80|500|J1.0K|45|16|1000|250|
|S320|12|9|320|500|J2.5K|28|10|2500|250|
|S1.2K|24|18|1200|500|J5.0K|20|7.2|5000|250|
|S5.2K|48|36|5200|500|J10.0K|14|5|10000|250|
|S13.0K|72|54|13000|400|J15.0K|11.5|4.2|15000|270|
|S30.0K|115|86|30000|500|J30.0K|8.3|2.9|30000|250|
|8 pole|||||8 pole|||||
|S12|3|2.25|12|750|J1.0K|45|20|1000|250|
|S35|5|3.75|35|750|J2.5K|28|13|2500|250|
|S52|6|4.5|52|700|J5.0K|20|9|5000|250|
|S200|12|9|200|750|J10.0K|14|6.4|10000|250|
|S800|24|18|800|750|J15.0K|11.5|5.3|15000|270|
|S3.2K|48|36|3200|750|J30.0K|8.3|3.7|30000|250|
|S7.5K|72|54|7500|700|J - sensitive DC current adjustment - R10S types only||J - sensitive DC current adjustment - R10S types only|J - sensitive DC current adjustment - R10S types only||
|S16.0K|115|86|16000|850|1 pole|||||
|SS - ultra sensitive DC voltage adjustment|||||J5001)|–|4.5|500|10|
|1 pole|||||J1.0K1)|–|3.2|1000|10|
|SS220|3|2.25|220|45|J2.5K|–|2|2500|10|
|SS700|5|3.75|700|40|J5.0K2)|–|1.4|5000|10|
|SS1.0K|6|4.5|1000|40|J10.0K|–|1|10000|10|
|SS4.0K|12|9|4000|40|J16.0K|–|0.8|16000|10|
|SS9.0K|18|13.5|9000|40|J30.0K3)|–|0.6|30000|11|
|SS15.0K|24|18|15000|40||||||
|SS30.0K|36|27|30000|45||||||



2 

Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 

08-2015, Rev. 0815 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company 

Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions 

Signal Signal Relays 

**Potter & Brumfield** 

## **R10 Series Relay** (Continued) 

Operative Range R10 Relays (DC Only) Typical Ranges of Operations @ 25°C 

**==> picture [516 x 586] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||||||||||
|---|---|---|---|---|---|---|---|---|---|
|Coil versions, DC coil|(continued)|
|R10 Relays (DC Only) Typical Ranges of Operations @ 25°C|
|Coil|Maximum|Operate|Coil|Pick-up|
|code|coil current|current|resistance|coil power|
|mADC|mADC|Ω±10%|mW|(Curves for reference only. If specific|
|J - sensitive DC current adjustment – R10S types only|values are required, testing is required.)|
|2 pole|30|12|
|J500|[1)]|–|6.3|500|20|
|J1.0K|–|4.5|1000|20|25|Typical Operate|10|
|J2.5K|[2)]|–|2.9|2500|25|and Release Time|
|J5.0K|–|2|5000|20|20|TeA|(all contact configurations)||||8|
|J10.0K|[3)]|–|1.4|10000|20|
|J16.0K|–|1.2|16000|25|
|J30.0K|–|0.8|30000|20|15|QL|6|
|4 pole|Release Time|
|J500|–|9|500|45|10|pf|(no suppression)|4|
|J1.0K|–|6.5|1000|45|
|J2.5K|[2)]|–|4.1|2500|45|
|J5.0K|[3)]|–|2.9|5000|45|5|a|2|
|Operate Time|
|J10.0K|–|2|10000|40|
|ee|
|J16.0K|–|1.4|16000|35|
|1.0|1.33|1.5|2.0|2.5|3.0|
|J30.0K|–|1.2|30000|45|
|Multiple of Max. Pull-in Voltage or Current|
|1) Suggested for 5VDC operation|R10 Ultra-Sensitive “SS” and “JJ” Typical Ranges of Operation @ 25°C|
|2) Suggested for 12VDC operation|
|3) Suggested for 24VDC operation|
|JJ - ultrasensitive DC current adjustment|(Curves for reference only. If specific|
|1 pole|values are required, testing is required.)|
|JJ1.0K|45|4.5|1000|20|50|10|
|JJ2.5K|28|2.9|2500|25|
|Typical Operate|
|JJ5.0K|20|2.1|5000|25|
|40|and Release Time|8|
|JJ10.0K|14|1.5|10000|25|(all contact configurations)|
|JJ15.0K  JJ30.0K|11.5 8.3|1.2 0.85|15000 30000|25 25|30|Mer|6|
|2 pole|
|JJ1.0K  JJ2.5K  JJ5.0K|45 28 20|6.5 4.1 2.9|1000 2500 5000|45 45 45|20|aBNGE|(no suppression)Release Time|4|
|JJ10.0K|14|2|10000|40|CNS|
|10|2|
|JJ15.0K|11.5|1.7|15000|45|Operate Time|
|JJ30.0K|8.3|1.2|30000|45|
|OO|4 pole|1.0|pooHT|1.5|Re|2.0|E>|3.0|4.0|
|JJ1.0K|45|9|1000|85|
|JJ2.5K|28|5.8|2500|85|Typical Coil Inductance Multiple of Max. Pull-in Voltage or Current|
|JJ5.0K|20|4.1|5000|85|
|JJ10.0K|14|3|10000|90|
|JJ15.0K|11.5|2.4|15000|85|
|500|
|i|JJ30.0K All figures are given for coil without preenergization, at ambient temperature +23°C. 8.3|1.7|30000|90|
|100|
|Coil versions, AC coil (dual coil diode rectif|Coil|Rated|Operate|ed construction)|Coil|50|eesae|
|code|voltage|voltage|resistance|
|VAC|VAC|Ω±20%|10|
|Armature (open)|
|Standard AC|
|2 and 4 pole|Armature (closed)|
|6V|6|5|25|1.0|aa|
|12V   24V|12 24|18 9|500 120|0.5|Oe|
|48V|48|36|2000|
|115V|115|86|9000|“2A;|
|6 and 8 pole|0.110|50|100|500|1K|5K|10K|100K|
|6V|6|5|15|
|12V|12|9|90|Coil Resistance (Ohms)|
|24V|24|18|350|
|48V|48|36|1400|
|115V|115|86|7500|

**----- End of picture text -----**<br>


All figures are given for coil without preenergization, at ambient temperature +23°C. 

3 

Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 

08-2015, Rev. 0815 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company 

Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions 

Signal Signal Relays 

**Potter & Brumfield** 

## **R10 Series Relay** (Continued) 

|~~**Insulation Data**~~||
|---|---|
|Initial dielectric strength||
|between open contacts|500Vrms|
|between contact and coil|1000Vrms|
|between adjacent contacts|1000Vrms|
|Initial insulation resistance||
|between insulated elements|10GΩ, 500VDC|
|||
|~~**Other Data**~~||
|Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content||
|refer to the Product Compliance Support Center at|refer to the Product Compliance Support Center at|
|www.te.com/customersupport/rohssupportcenter||
|Ambient temperature|-55ºC to 75ºC|
|Category of environmental protection||
|IEC 61810|RTI-dust protected and RTIII-wash tight|



|~~**Other Data**(continued)~~||
|---|---|
|Terminal type|Solder/plug-in terminals, PCB-THT,|
||8-or 11-PIN octal type plug|
|Weight|23 to 40g|
|Packaging/unit|tray/50 pcs., box/350pcs.|
|||
|~~**Accessories**~~||
|For details see datasheet|Sockets and Accessories, R10 Relays|
|Product Code Description||
|Many versions of sockets and clips available.|Many versions of sockets and clips available.|



**NOTE:** Relays with contact current <50mA are not recommended for use in sockets. 

## **Dimensions** 

**==> picture [337 x 202] intentionally omitted <==**

**----- Start of picture text -----**<br>
1.187 MAX .<br>(30.15)<br>.735 MAX. R10S: 1.50 MAX. CASE R ONLY<br>an (18.67) CASE E a (38.1) Recommend tape tab<br>ONLY be removed after<br>2 POLE .950 MAX. immersion cleaning<br>(24.13, 2 POLE 1R10) and before relay is put<br>.406 4 POLE 1.165 MAX. in service. Peel off to<br>(10.31) .085 MAX. (29.59, 4 POLE 1R10)6 POLE 1.375 MAX. permit proper relay<br>(2.16) (34.93) ventilation.<br>.135 8 POLE 1.580 MAX.(40.13)<br>(3.43)<br>.171<br>.354<br>y (4.43) “ Er TYPE E6 ONLY<br>(8.99)<br>.210<br>(5.33) .375 .156<br>NIB .091 DIA. x .020 HIGH3-48 THREAD } [TYPE E1 ONLY] THREAD#6-32 (9.53) (3.96)<br>(2.31)    (.51)<br>TYPE E6 ONLY<br>.59 REF.<br>(15.0) oe .437<br>(11.10)<br>STUD ON NARR OW<br>SIDE ONLY<br>**----- End of picture text -----**<br>


## **Terminal dimensions** 

Solder terminal dimensions Printed circuit terminal dimensions 

**==> picture [515 x 248] intentionally omitted <==**

**----- Start of picture text -----**<br>
.090 A B C D Arrang.<br>(2.29) .040 B Type 2 .131 .050 .064 1.251 Inline<br>(1.02) Type 7 .131 .040 .013 1.20 Inline<br>i: Y<br>C A Type 9 .170 .040 .000 1.187 Staggered<br>D Thickness .012 .012 .012 .013 –––<br>.080 .012 (TO TOP OF CASE)<br>(2.03) (.30)<br>Terminal assignment<br>R10 - AC Coil Diagram<br>28     15       16<br>26      27       14<br>22     12       13 25     12       13 oathia<br>20      21      11 23      24      11<br>fore Seabee<br>16       9       10 16       9       10 19       9       10 22       9       10 oe pos<br>DUAL<br>14     15        8 14     15        8 17      18       8 20      21       8 COIL<br>10       6        7 10       6        7 13       6        7 13       6        7 16       6        7 19       6        7<br> 8        9        5  8        9        5 11     12        5 11     12        5 14      15       5 17      18       5<br>boo} 4    3    2     1 boo 4    3    2     1 8 S008 4    3    2     1 boob 4    3    2     1 boo} 4    3    2     1 Sook 4    3    2     1<br>1 POLE 2 POLE 3 POLE 4 POLE 6 POLE 8 POLE<br>08-2015, Rev. 0815 Datasheets and product specification   Datasheets and product data is subject to the  Datasheets, product data, ‘Definitions’ sec-<br>www.te.com according to IEC 61810-1 and to be used  terms of the disclaimer and all chapters of  tion, application notes and all specifications<br>© 2015 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at  are subject to change.<br>**----- End of picture text -----**<br>


4 08-2015, Rev. 0815 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company 

Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ secterms of the disclaimer and all chapters of tion, application notes and all specifications the ‘Definitions’ section, available at are subject to change. http://relays.te.com/definitions 

Signal Signal Relays 

**Potter & Brumfield** 

## **R10 Series Relay** (Continued) 

**==> picture [519 x 581] intentionally omitted <==**

**----- Start of picture text -----**<br>
PCB layout  Suggested panel cutout for relay  Mounting hole layout for<br>Bottom view on solder pins terminal & mounting style 6<br>Terminal Types E2 & R2  Terminal Types E9 & R9<br>(Omit unnecessary holes)  (Omit unnecessary holes)<br>2 HOLES .187 ± .002 DIA.<br>.210 (12.70).500 .109 + .005– .000 DIA. TOLERANCE: (± .25) [± .010] (4.75 ± .05)<br>.320(5.33) .420 (13.46).530 (18.80).740 (2.54)GRID.100 6 (           )2.77+ .13– .00 X (11.10).437<br>(8.13) (10.67) POLE<br>(2.79).110 Laat (10.16)(11.43).400.450 (13.97).550(        .0561.42HOLES+ .004+ .10- .000- .00(16.00).630)DIA. .056(        )1.42HOLES+ .004- .000+ .10- .00 DIA.(12.70).500 (11.43).450 et (3.81)POLE.1502 POLE(2.54)4.100 (16.66 ± .38).656 ± .015(7.14).281 THE X = 2 POLE – .343 ± .020                 (8.71 ± .51)(8.99).354 (3.56).140 .281 ± .015(7.14 ± .38) .147 ± .002 DIA.(3.73 ± .05)<br>4 POLE – .562 ± .020<br>                 (14.27 ± .51)<br>6 POLE – .781 ± .020<br>                 (19.84 ± .51)<br>8 POLE – 1.000 ± .020<br>                 (25.40 ± .51)<br>Product code structure  Typical product code  R10  -E  1  Y  4  -V700<br>Type<br>R10  Cradle-style relay with form C contacts<br>R10S  Super sensitive cradle-style relay with form C contacts<br>Case style<br>E  Non-sealed polycarbonate dust cover (RTI)<br>R  Wash-tight (RTIII), tape sealed plastic case   [1)]<br>T  Octal style base on non-sealed polycarbonate dust cover (terminal types 1 & 2 only; 1, 2 & 3 poles only)<br>  1) R10 type only, terminal code 2 or 9 only, no ground or stud<br>Terminal and mounting<br>1  Solder/Plug-in terminals with #3-48 mounting stud on R10-E; 8-pin octal type on R10-T<br>2 PCB terminals (std.) 1.62mm (.064in) clearance, 31.75mm (1.25in) seated ht.; 11-pin octal type on R10-T<br>6 Side mounting plate with #6-32 stud, solder/plug-in terminals (#3-48 stud not included)<br>7 Narrow 1.02mm (.04in) PCB terminals, .33mm (.013in) clearance, 30.48mm (1.2in) seated ht.<br>9 Non-shouldered, narrow 1.02mm (.04in) PCB terminals in staggered arrangement  [ 2)]<br>2) Available only on 1 through 6 pole models<br>Contact style and rating    [3)]<br>W  Single contact rated 7.5A max, 300mA min.  [4)  5)]<br>X  Single contact rated 5A max, 300mA min.   [5)  6)]<br>M  Bifurcated contact rated 5A max, 300 mA min.  [5) 6)]<br>Y  Single contact rated 2A typ, 3A max, 100mA min.<br>Z  Bifurcated low level contacts rated 100mA typ, 2A max, 1mA min.<br>P  Bifurcated crossbar dry circuit contacts rated 1mA typ, 3A max, dry circuit min.<br>L  Bifurcated crossbar dry circuit contacts rated 500 microA typ, 250 mA max, dry circuit min.<br>  3) Ratings are at 28VDCV or 115VAC. Total load must not exceed 30A per relay.<br>  4) Use ungrounded frame for AC load of ≥5A. Max ratings are 7.5A at 115VAC and 4A at 28VDC for coil codes S & J<br>  5) Only available on R10 type, only available with coil adjustment code V, Q, S and J.<br>—   6) Use ungrounded frame for AC load of ≥5A. Max ratings are 5A at 115VAC and 3A at 28VDC for coil codes S & J<br>Number of poles<br>1  1 pole  4  4 pole (not available on R10-T)<br>2  2 pole  6  6 pole (not available on R10-T)  [7)]<br>3  3 pole  8  8 pole (not available on R10-T)   [8)]<br>  7) Not available with contact code W<br>  8) Only available with case style E, not available with contact code W<br>**----- End of picture text -----**<br>


- **Coil voltage** 

   - Coil code: please refer to coil versions table 

**AC voltage** Specify coil code consisting of nominal coil voltage followed by W (example: 24V) 

- **DC voltage** Specify coil code consisting of coil adjustment code letter followed by coil resistance (example: V700) 

5 

Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 

08-2015, Rev. 0815 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company 

Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions 

Signal Signal Relays 

**Potter & Brumfield** 

## **R10 Series Relay** (Continued) 

|R10-E1P2-115V<br>R10-E1P2-V700<br>R10-E1P4-115V<br>R10-E1P4-V700<br>R10-E1W2-V185<br>R10-E1W2-V700<br>R10-E1W4-V185<br>R10-E1W4-V700<br>R10-E1X2-24V<br>R10-E1X2-115V<br>R10-E1X2-S800<br>R10-E1X2-V185<br>R10-E1X2-V700<br>R10-E1X4-115V<br>R10-E1X4-V185<br>R10-E1X4-V700<br>R10-E1X4-V2.5K<br>R10-E1X6-115V<br>R10-E1X6-V90<br>R10-E1X6-V430<br>R10-E1Y2-J1.0K<br>R10-E1Y2-J2.5K<br>R10-E1Y2-V185<br>R10-E1Y2-V700<br>R10-E1Y2-V2.5K<br>R10-E1Y2-V15.0K<br>R10-E1Y4-J10.0K<br>R10-E1Y4-V52<br>R10-E1Y4-V2.5K<br>R10-E1Y4-V700<br>R10-E1Y6-V430<br>R10-E1Y6-V1.5K<br>R10-E1Z2-V185<br>R10-E1Z2-V700<br>R10-E1Z4-V185<br>R10-E1Z4-V700<br>R10-E1Z4-V2.5K<br>R10-E1Z6-V430<br>R10-E1Z6-V1.5K<br>R10-T1P2-115V<br>R10S-E1Y1-J1.0K<br>R10S-E1Y2-J5.0K<br>R10-E2P4-V185<br>R10-E2P4-V700<br>R10-E2W2-V185<br>R10-E2X2-V185<br>R10-E2X2-V700<br>R10-E2X4-V185<br>R10-E2X4-V700<br>R10-E2Y2-V185<br>R10-E2Y2-V700<br>R10-E2Y4-V185<br>R10-E2Y4-V700<br>R10S-E2Y1-J1.0K<br>~~|~~<br>~~|~~|2 form C, 2 CO|Au overlay Ag|Bif crossbar / dry circuit<br>~~||||||~~|115 VAC<br>~~|~~<br>~~||~~|Solder/plug-in w/ #3-48 mounting stud|7-1393765-0<br>6-1393765-9<br>7-1393765-6<br>7-1393765-5<br>8-1393765-9<br>9-1393765-1<br>9-1393765-3<br>9-1393765-5<br>1-1393766-1<br>1-1393766-0<br>1393766-3<br>1393766-5<br>1393766-9<br>1-1393766-8<br>1-1393766-4<br>1-1393766-7<br>1-1393766-5<br>2-1393766-5<br>2-1393766-4<br>2-1393766-2<br>3-1393766-3<br>3-1393766-4<br>4-1393766-0<br>4-1393766-4<br>4-1393766-1<br>3-1393766-9<br>4-1393766-9<br>5-1393766-6<br>5-1393766-5<br>5-1393766-7<br>6-1393766-1<br>6-1393766-0<br>7-1393766-2<br>7-1393766-4<br>7-1393766-9<br>8-1393766-1<br>8-1393766-0<br>8-1393766-6<br>8-1393766-5<br>2-1393769-8<br>7-1393769-0<br>7-1393769-5<br>1393767-3<br>1393767-4<br>1393767-7<br>1-1393767-1<br>1-1393767-5<br>1-1393767-7<br>1-1393767-8<br>2-1393767-6<br>2-1393767-9<br>3-1393767-5<br>3-1393767-6<br>8-1393769-1|
|---|---|---|---|---|---|---|
|||||24 VDC<br>~~|~~<br>~~||~~|||
||4 form C, 4 CO|||115 VAC<br>~~|||~~|||
|||||24 VDC<br>~~||||||~~|||
||2 form C, 2 CO|AgCdO|Single contact / 7.5A<br>~~|||||||~~|12 VDC<br>~~||||~~|||
|||||24 VDC<br>~~|||~~|||
||4 form C, 4 CO|||12 VDC<br>~~||||~~|||
|||||24 VDC<br>~~||||||~~|||
||2 form C, 2 CO||Single contact / 5A<br>~~|||~~<br>~~|||||||||~~|24 VAC<br>~~|||~~|||
|||||115 VAC<br>~~||~~|||
|||||12 VDC<br>~~||~~<br>~~|~~|||
|||||24 VDC<br>~~||~~|||
||4 form C, 4 CO|||115 VAC<br>~~|||~~|||
|||||12 VDC<br>~~|||~~|||
|||||24 VDC<br>~~|||~~|||
|||||48 VDC<br>~~|||~~|||
||6 form C, 6 CO|||115 VAC<br>~~|||~~|||
|||||12 VDC<br>~~|||~~|||
|||||24 VDC<br>~~|||~~|||
||2 form C, 2 CO|Ag|Single contact / 2A typical<br>~~||~~<br>~~|~~<br>~~|[|||||~~|Not applicable<br>~~||Cd~~|||
|||||~~|Cd~~<br>~~|~~<br>~~|~~|||
|||||12 VDC<br>~~|~~|||
|||||24 VDC<br>~~||~~|||
|||||48 VDC<br>~~|~~|||
|||||115 VDC<br>~~|~~<br>~~|~~|||
||4 form C, 4 CO<br>~~—~~<br>~~oe~~|||Not applicable<br>6 VDC<br>~~|~~|||
|||||48 VDC|||
|||||24 VDC<br>~~—~~|||
||6 form C, 6 CO<br>~~—~~<br>~~oe~~||||||
|||||48 VDC<br>~~—~~<br>~~|[|||||~~|||
||2 form C, 2 CO<br>~~oe~~||Bifurcated / 100mA typical<br>~~|[|||||~~|12 VDC<br>~~—~~<br>~~|[|||||~~|||
|||||24 VDC<br>~~|[|||||~~|||
||4 form C, 4 CO|||12 VDC<br>~~|[|||||~~|||
|||||24 VDC<br>~~|[|||||~~|||
|||||48 VDC<br>~~|[|||||~~|||
||6 form C, 6 CO|||24 VDC<br>~~|[|||||~~|||
|||||48 VDC<br>~~|[|||||~~|||
||2 form C,2 CO<br>~~e~~<br>~~|~~|Au overlayAg<br>~~e~~|Bif crossbar / drycircuit<br>~~|[|||||~~<br>~~eG~~|115 VAC<br>~~|[|||||~~<br>~~G~~|||
||1 form C,1 CO<br>~~e~~<br>~~|~~<br>~~|~~|Ag<br>~~e~~|Single contact / 2A typical<br>~~eG~~<br>~~|~~|Not applicable<br>~~G~~<br>~~|~~|||
||2 form C,2 CO<br>~~|~~<br>~~|~~||||||
||4 form C, 4 CO<br>~~|~~<br>~~—~~|Au overlay Ag|Bif crossbar / dry circuit<br>~~|~~<br>~~|~~|12 VDC<br>~~|~~<br>~~|~~|PCB, .064" clearance, 1.25" seated ht.||
|||||24 VDC<br>~~|~~<br>~~|~~|||
||2 form C, 2 CO<br>~~—~~|AgCdO|Single contact / 5A<br>~~|~~<br>~~|||~~|12 VDC<br>~~|~~<br>~~|~~|||
|||||24 VDC<br>~~|~~<br>~~||~~|||
||4 form C, 4 CO<br>~~—~~|||12 VDC<br>~~|~~<br>~~|||~~|||
|||||24 VDC<br>~~||~~|||
||2 form C, 2 CO|Ag|Single contact / 2A typical<br>~~|~~<br>~~|~~~~**|**~~|12 VDC<br>~~||~~<br>~~|~~|||
|||||24 VDC<br>~~|~~<br>~~|~~~~**|**~~|||
||4 form C, 4 CO|||12 VDC<br>~~|~~~~**|**~~|||
|||||24 VDC<br>~~**|**~~|||
||1 form C,1 CO|||Not applicable|||



6 

Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ secterms of the disclaimer and all chapters of tion, application notes and all specifications the ‘Definitions’ section, available at are subject to change. http://relays.te.com/definitions 

08-2015, Rev. 0815 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company