Image not available
Illustrative purposes only
PY14
Relay Socket, Panel, Solder Lug, 14 Pins, 3 A, MY Series
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: OMRON / PARTNER STOCK
- Product type: Relay Sockets
- SVHC: To Be Advised
- No. of Pins: 14Pins
- Product Range: MY Series
- Current Rating: 3A
- Voltage Rating: -
- Socket Mounting: Panel
- Socket Terminals: Solder Lug
| Delivery and price | |
|---|---|
| Units per pack | 90 |
| Price | 3.57 € |
| Current stock | 500+ |
| Lead time | 30 days |
Datasheet
CSM_common_sockets_DS_E_3_16 ## **Common Sockets** ## **A Wide Variety of Square and Round Sockets in Front-mounting and Back-mounting Models** - Models available with finger protection. - Hold-down Clips and Short Bars for PYFZ/PYF Sockets are also available. - New screwless models available. For the most recent information on models that have been certified for safety standards, refer to your OMRON website. ## **Ordering Information** ## **Square Sockets** **==> picture [495 x 168] intentionally omitted <==** **----- Start of picture text -----**<br> Model P2R (back-mounting), pages 11 and 12 P7TF (front-<br>P2RF (front-mounting), page 8 mounting),<br>Number<br>Solder terminals PCB terminals page 12<br>of pins<br>P2RF-05 P2RFZ-05-E P2RF-05-E [*] P2R-05A P2R-05P P2R-057P P7TF-05<br>Approx. 27 g Approx. 30 g Approx. 38 g Approx. 5 g Approx. 5 g Approx. 5.5 g Approx. 28 g<br>5 pins<br>AA ~ Z RO >) <e |: asit<br>wl S nis ai ~E .<br> P2RF-08 P2RFZ-08-E P2RF-08-E [*] P2R-08A P2R-08P P2R-087P ---<br> Approx. 33 g Approx. 38 g Approx. 38 g Approx. 5 g Approx. 5 g Approx. 5.5 g<br>8 pins<br>**----- End of picture text -----**<br> **Note: 1.** The structure of @-E models provides finger protection. Round terminals cannot be used. Use forked crimp terminals. **2.** To remove the Relay, pull the lever on the Socket with your fingers supporting the lever and the opposite side of the Relay case, and jiggle the Relay. - Use a #1 Phillips screwdriver to tighten the screws on this Socket. **1** **Common Sockets** **==> picture [491 x 478] intentionally omitted <==** **----- Start of picture text -----**<br> Model PY (back-mounting), pages 16 to 14<br>PYF (front-mounting), pages 13 to 14<br>Number<br>Solder terminals Wrapping terminals PCB terminals<br>of pins<br>ey ee ee<br>PYF08A [*3] PYF08M PY08 PY08-Y1 PY08QN PY08QN-Y1 PY08-02 [*2]<br>Approx. 32 g Approx. 26 g Approx. 8 g PY08-Y3 Approx. 12 g PY08QN2-Y1 Approx. 7.2 g<br>g , PY08QN2 Ff<br>PYF08A-E [*1,3] PYFZ-08<br>Approx. 32 g<br>8 pins<br>Pge. NEW e te t ©<br>PYFZ-08-E [*3]<br>Approx. 32 g<br>PYF11A Approx. 43 g PY11 Approx. 9 g 1 PY11-Y1 PY11QNPY11QN2 PY11QN-Y1PY11QN2-Y1 Ce ? PY11-02 [*2]<br>11 pins<br>al i<br>NEW<br>PYF14A [*] [3] PYFZ-14 PY14 PY14-Y1 PY14QN PY14QN-Y1 PY14-02 [*2]<br>Approx. 49 g Approx. 50 g Approx. 10 g PY14-Y3 Approx. 14 g PY14QN2-Y1<br>PY14QN2 PY14QN-Y3<br>PY14QN2-Y3<br>oH. | ‘K<br>14 pins PYF14A-E [*1,3] PYFZ-14-E [*1]<br>Approx. 50 g<br>eoeNEW ee F * *<br>**----- End of picture text -----**<br> **Note:** The structure of @-E models provides finger protection. Round terminals cannot be used. Use forked crimp terminals. - *1. Use a #1 Phillips screwdriver to tighten the screws on this Socket. - *2. The structure does not resist flux. Manual soldering is recommended for this product. - *3. Scheduled to be discontinued in March 2021. **2** **Common Sockets** **==> picture [511 x 209] intentionally omitted <==** **----- Start of picture text -----**<br> Model PT (back-mounting), pages 19 to 16<br>PTF (front-mounting), pages 18 to 15<br>Number<br>Solder terminals Wrapping terminals PCB terminals<br>of pins<br>PTF08A Approx. 47 g PTF08A-E [*1] PT08 Approx. 11 g PT08QN PT08-0 [*2]<br>Approx. 10.4 g Approx. 8 g<br>8 pins<br>PTF11A Approx. 61 g PT11 Approx. 13 g PT11QN PT11-0 [*2]<br>Approx. 12.2 g<br>11 pins<br>PTF14A Approx. 77 g PTF14A-E [*1] PT14 Approx. 17 g PT14QN PT14-0 [*2]<br>Approx. Approx. 16.2 g<br>20 g<br>14 pins<br>**----- End of picture text -----**<br> **Note:** The structure of @ -E models provides finger protection. Round terminals cannot be used. Use forked crimp terminals. * Use a #1 Phillips screwdriver to tighten the screws on this Socket. - The structure does not resist flux. Manual soldering is recommended for this product. **==> picture [154 x 106] intentionally omitted <==** **----- Start of picture text -----**<br> Model<br>Number P7LF (front-mounting), page 20<br>of pins<br> P7LF-06 Approx. 60 g<br>6 pins<br>**----- End of picture text -----**<br> **Note:** Refer to _Models with Standards Certification_ for detailed information on the models of Common Sockets that are certified for standards. **3** **Common Sockets** ## **Round Sockets** **==> picture [512 x 440] intentionally omitted <==** **----- Start of picture text -----**<br> Model PL (back-mounting), page 25<br>PF (front-mounting), P2CF (front-mounting), PFA (front-mounting), P3G (back-mounting),<br>Number page 21 page 22 page 23 page 24 Solder Wrapping PCB<br>of pins terminals terminals terminals<br>PF083A P2CF-08 8PFA P3G-08 PL08 PL08-Q PLE08-0<br>Approx. 34 g Approx. 55 g Approx. Approx. 40g Approx. 14 g Approx. 15 g Approx.<br>57 g 10.6g<br>PF083A-E [*]<br>P2CF-08-E<br>8 pins 8PFA1 Note: The Y92A-48G<br>Approx. Terminal Cover<br>66 g can be used to<br>PF085A provide finger<br>Approx. 40 g protection.<br>PF113A P2CF-11 11PFA P3GA-11 PL11 PL11-Q PLE11-0<br>Approx. Approx. Approx. 74 g Approx. Approx. 15 g Approx. Approx.<br>47 g 70g 47 g 18.5A 10.8 g<br>11 pins<br>PF113A-E [*] P2CF-11-E Note: The Y92A-48G<br>Terminal Cover<br>can be used to<br>provide finger<br>protection.<br>14PFA Approx. 104 g PL15<br>Approx. 28 g<br>--- --- --- --- ---<br>14 pins<br>PL20<br>Approx. 17 g<br>--- --- --- --- --- ---<br>20 pins<br>**----- End of picture text -----**<br> **Note:** The structure of @ -E models provides finger protection. Round terminals cannot be used. Use forked crimp terminals. * Use a #1 Phillips screwdriver to tighten the screws on this Socket. ## **Terminal Cover** |**Model**|**Y92A-48G**| |---|---| |**Appearance**|| **Note:** Refer to Models with Standards Certification for detailed information on the models of Common Sockets that are certified for standards. **4** **Common Sockets** ## **Hold-down Clips For Square Sockets** ## **(Unit: mm)** **==> picture [511 x 354] intentionally omitted <==** **----- Start of picture text -----**<br> PKC One Set (2 Clips) PTC-1 PYC-A1 Approx. 0.54 g PYC-A2 PYC-E1 PYC-P Approx. 1.4 g<br>4.5 5 One Set (2 Clips) One Set (2 Clips) One Set (2 Clips)<br>3<br>Approx. 5<br>3.3 Approx. 5 Approx. 5<br>10 5<br>7° 29 29 max . Approx. 3<br>71.8 36.3 42.8 36.3<br>2.7 2.7 38.5<br>36.3 [40.7]<br>4.5<br>3 4.5 1 4.5 1.2 4.5 4.5 1.2 4.5 ±0.1 5.8 1.2 4.3<br>2.5 9.6<br>PYC-P2 Approx. 1.2 g PYC-S Approx. 1.8 g PYC-1 Approx. 6 g PYC-2 PYC-3 PYC-5<br>9.4<br>10 8 8 5 10<br>28<br>28 28 28.8 Approx. 3 29.5<br>3.7<br>2.5<br>52 58.2 44.5 41.7<br>PYC Approx. 0.2 g Y92H-1 Y92H-3 Y92H-4<br>One Set (2 Clips) R9<br>Approx. 5<br>10 6 3 5<br>3.5 30.5<br>24.5 2.5<br>3.7<br>53<br>1.5 72.9 20 (84°)<br>34.5<br>1.5<br>34.7<br>23.5<br>6 33.7<br>6 10 2 4.5 1.2 4.5<br>**----- End of picture text -----**<br> ## **For Round Sockets** **==> picture [511 x 257] intentionally omitted <==** **----- Start of picture text -----**<br> PFC-A1 Approx. 2.2 g PFC-A6 Approx. 2.4 g PFC-A7 Approx. 3.0 g PLC Approx. 2.4 g PLC-1 Approx. 2.6 g PLC-7 Approx. 3.0 g<br>One Set (2 Clips) One Set (2 Clips) One Set (2 Clips) One Set (2 Clips) One Set (2 Clips) One Set (2 Clips)<br>4.6 4.6<br>4.6<br>60.8 62 73.3 74.5 94 95.2 56.6 56.3 69.2 65.7<br>7.6 8 8<br>6 4.5<br>6 4.5 9<br>6 4.5<br>PLC-8 Approx. 6.4 g PLC-10 Approx. 2.0 g PLC-12 Approx. 5.4 g<br>One Set (2 Clips) One Set (2 Clips) One Set (2 Clips)<br>5<br>90.2 86.7 64.3<br>66.2<br>8 8<br>9 6<br>**----- End of picture text -----**<br> **5** **Common Sockets** ## **Applicable Hold-down Clips For Square Sockets** |**Sockets**|**PYFZ-**@<br>**PYF**@**A**<br>**PTF**@**A**|**PYF08M**|**PY**@**(QN)**<br>**PT**@**(QN)**|**PY**@**-02**<br>**PT**@**-0**| |---|---|---|---|---| |**Applicable models**||||| |**MY**@**, MY**@**N,**<br>**MY**@**-D, MY2**@**-CR,**<br>**MY4**@**-CR,**<br>**MY4Z**@**-CR,**<br>**MY**@**-TU, MY2K,**<br>**MY**@**N-D2, LY**@**,**<br>**LY**@**N, LY**@**-TU,**<br>**MYQ**@**,**<br>**G3H(D) Series,**<br>**G3F(D) Series,**<br>**G3FM, and G9H**|PYC-A1|PYC<br>PYC-P|PYC-P<br>PYC-S|PYC-P| |**MY**@**I***<br>**LY**@**I**||---|PYC-P2|| |**MY4H**||---|PYC-P|| |**MY2Z**@**-CR**<br>**MY3**@**-CR**<br>**LY**@**-CR**|Y92H-3|---|PYC-1|| |**G7K**|PKC|---||| |**H3Y**|Y92H-3|Y92H-4||| **Note:** The @ in the model number is replaced with 08, 11, or 14. - If you use a Hold-down Clip with the MY2I, you cannot use the PYF08A. Use the PYF14A. ## **For Round Sockets** |**Sockets**|**PF083A**<br>**PF113A**|**PL08 (-Q)**<br>**PL11 (-Q)**|**PLE08-0**<br>**PLE11-0**|**P2CF-11**| |---|---|---|---|---| |**Applicable models**||||| |**61F-03B, -04B**|PFC-A1|PLC|PLC-10|---| |**61F-GP-N,**<br>**-GPN-BT**<br>**61F-GP-N8**<br>**?61F-APN2**|PFC-N8|PHC-5||| |**MK2P Series,**<br>**MK2KP,**<br>**MK3P**@**(-US), and**<br>**G3B(D) Series**|PFC-A1|PLC||| |**MK3ZP**<br>**MK3LP**||PLC-1||| |**MYA-NA1, -NB1**<br>**MYA-LA1, -LB1**<br>**MYA-NA2, -NB2**<br>**MYA-LA2, -LB2**|PFC-A6|PLC-7|---|---| |**MYA-LA12, -LB12**|PFC-A7|PLC-8|---|---| |**APR-S**|PFC-A6|PLC-7|---|---| |**APR-S380/-S440**|---|---|---|Y92H-1| |**LG2**|PFC-A7|PLC-8|---|---| |**K6EL**|---|Y92H-1|---|---| **Note: 1.** The 8PFA(1), 11PFA, and 14PFA are held with hooks. **2.** The PL15, PL20, and PF202, as well as models not given in the above table, require panel processing for installation. **3.** The PF085A Hold-down Clip is included with the H3M and H2A. It is an option (sold separately) for the H2C. **6** **Common Sockets** ## **Specifications** ## **Socket Characteristics** |**Model**|**Continuous**<br>**carry current**|**Dielectric strength**|**Insulation**<br>**resistance***|**Remarks**| |---|---|---|---|---| |P2RFZ-05-E|10 A|Between contact terminals of samepolarity: 1,000 VAC for 1 min|1,000 MΩmin.|| |||Between coil and contact terminals: 4,000 VAC for 1 min||| |P2RFZ-08-E|5 A|Between contact terminals of differentpolarity: 3,000 VAC for 1 min|1,000 MΩmin.|| |||Between contact terminals of samepolarity: 1,000 VAC for 1 min||| |||Between coil and contact terminals: 4,000 VAC for 1 min||| |P2RF-05(-E)|10 A|Between contact terminals of samepolarity: 1,000 VAC for 1 min|1,000 MΩmin.|| |||Between coil and contact terminals: 4,000 VAC for 1 min||| |P2RF-08(-E)|5 A|Between contact terminals of differentpolarity: 3,000 VAC for 1 min|1,000 MΩmin.|| |||Between contact terminals of samepolarity: 1,000 VAC for 1 min||| |||Between coil and contact terminals: 4,000 VAC for 1 min||| |P2R-05P|10 A|Between contact terminals of samepolarity: 1,000 VAC for 1 min|1,000 MΩmin.|| |||Between coil and contact terminals: 4,000 VAC for 1 min||| |P2R-08P|5 A|Between contact terminals of differentpolarity: 3,000 VAC for 1 min|1,000 MΩmin.|| |||Between contact terminals of samepolarity: 1,000 VAC for 1 min||| |||Between coil and contact terminals: 4,000 VAC for 1 min||| |P2R-057P|10 A|Between contact terminals of samepolarity: 1,000 VAC for 1 min|1,000 MΩmin.|| |||Between coil and contact terminals: 5,000 VAC for 1 min||| |P2R-087P|5 A|Between contact terminals of differentpolarity: 3,000 VAC for 1 min|1,000 MΩmin.|| |||Between contact terminals of samepolarity: 1,000 VAC for 1 min||| |||Between coil and contact terminals: 5,000 VAC for 1 min||| |P2R-05A|10 A|Between contact terminals of same polarity: 1,000 VAC for 1 min|1,000 MΩmin.|| |||Betweenground terminals: 1,500 VAC for 1 min||| |||Between coil and contact terminals: 4,000 VAC for 1 min||| |P2R-08A|5 A|Between contact terminals of different polarity: 3,000 VAC for 1 min|1,000 MΩmin.|| |||Between contact terminals of same polarity: 1,000 VAC for 1 min||| |||Betweenground terminals: 1,500 VAC for 1 min||| |||Between coil and contact terminals: 4,000 VAC for 1 min||| |P7TF-05|5 A|Between terminals: 2,000 VAC for 1 min|1,000 MΩmin.|| |PYFZ-08(-E)|10 A|Between contact terminals of different polarity: 2,250 VAC for 1 min|1,000 MΩmin.|| |||Between contact terminals of same polarity: 2,250 VAC for 1 min||| |||Between coil and contact terminals: 2,250 VAC for 1 min||| |PYF08A(-E)|7 A|Between terminals: 2,000 VAC for 1 min|1,000 MΩmin.|The continuous carry current of 10<br>A for the PYF08S is for an<br>ambient temperature of 55°C.<br>At an ambient temperature of<br>70°C, the value is 7 A.| |PYF11A|5 A|Between terminals: 2,000 VAC for 1 min|1,000 MΩmin.|| |PYFZ-14(-E)|6 A|Between contact terminals of differentpolarity: 2,250 VAC for 1 min|1,000 MΩmin.|| |||Between contact terminals of samepolarity: 2,250 VAC for 1 min||| |||Between coil and contact terminals: 2,250 VAC for 1 min||| |PYF14A(-E)|3 A|Between terminals: 2,000 VAC for 1 min|1,000 MΩmin.|| |PY08(-Y1)(-Y3)|7 A|Between terminals: 1,500 VAC for 1 min|1,000 MΩmin.|| |PY08QN(-Y1)|7 A|Between terminals: 1,500 VAC for 1 min|100 MΩmin.|| |PY08-02|7 A|Between terminals: 1,500 VAC for 1 min|100 MΩmin.|| |PY11(-Y1)|5 A|Between terminals: 1,500 VAC for 1 min|100 MΩmin.|| |PY11QN(-Y1)|5 A|Between terminals: 1,500 VAC for 1 min|100 MΩmin.|| |PY11-02|5 A|Between terminals: 1,500 VAC for 1 min|100 MΩmin.|| |PY14(-Y1)(-Y3)|3 A|Between terminals: 1,500 VAC for 1 min|100 MΩmin.|| |PY14QN(-Y1)|3 A|Between terminals: 1,500 VAC for 1 min|100 MΩmin.|| |PY14-02|3 A|Between terminals: 1,500 VAC for 1 min|100 MΩmin.|| |PTF@@A(-E)|10 A|Between terminals: 2,000 VAC for 1 min|100 MΩmin.|| |PT@@|10 A|Between terminals: 2,000 VAC for 1 min|100 MΩmin.|| |PT@@QN|10 A|Between terminals: 2,000 VAC for 1 min|100 MΩmin.|| |PT@@-0|10 A|Between terminals: 2,000 VAC for 1 min|100 MΩmin.|| |P7LF-06|30 A|Between contact terminals of differentpolarity: 2,000 VAC for 1 min|1,000 MΩmin.|| |||Between contact terminals of samepolarity: 2,000 VAC for 1 min||| |||Between coil and contact terminals: 4,000 VAC for 1 min||| |PF@@@A(-E)|5 A|Between terminals: 2,000 VAC for 1 min|1,000 MΩmin.|| |P2CF-@(-E)|5 A|Between terminals: 2,000 VAC for 1 min|1,000 MΩmin.|| |8PFA(1)|10 A|Between terminals: 2,000 VAC for 1 min|1,000 MΩmin.|| |11PFA(1)|10 A|Between terminals: 2,000 VAC for 1 min|1,000 MΩmin.|| |P3G(A)-@|6 A|Between terminals: 2,000 VAC for 1 min|1,000 MΩmin.|| |PL@(-Q)|10 A|Between terminals: 2,000 VAC for 1 min|1,000 MΩmin.|| |PLE@@-0|10 A|Between terminals: 2,000 VAC for 1 min|1,000 MΩmin.|| * The insulation resistance was measured with a 500-VDC insulation resistance meter at the same places as those used for measuring the dielectric strength. ## **Safety Precautions** **Refer to** _**Common Relay Precautions**_ **for general precautions.** **7** **Common Sockets** ## **Dimensions** ## **P2RF** ## **(Unit: mm)** **==> picture [511 x 382] intentionally omitted <==** **----- Start of picture text -----**<br> Dimensions Terminal Arrangement/Internal Connections Mounting Hole Dimensions<br>P2RF-05<br> (One Pole) 7± [0.2] 2<br>5-M3.5×8 4.2-dia. hole<br>4 dia. 9.5<br>4<br>30 [±0.05]<br>71.5 max . 35.5 3<br>4<br>M3 (M3 x 16)<br>2 or 3.2-dia. hole<br>5 1<br>4 19.5 max. 3 0 max19.5 . (Top View)<br>5 4 max . (Top View) Note: Track mounting is also possible.<br>P2RFZ-05-E<br>(One Pole)<br>(Finger Protection Structure) 3.2-dia. hole<br>8-M3X8 48 max. 2 10.5<br>4<br>2<br>3 39.5±0.1<br>(42.3)<br>39.5<br>78.5 max. M3 or<br>3.5-dia. hole<br>5 1<br>(35.8)<br>3.5-dia.<br>hole 35.5<br>17.2 (Top View) (Top View)<br>4 31 max. Note: Track mounting is also possible.<br>16 max.<br>61 max.<br>**----- End of picture text -----**<br> **P2RF-05-E (One Pole) (Finger Protection Structure)** **==> picture [452 x 167] intentionally omitted <==** **----- Start of picture text -----**<br> 7 [±0.2]<br>3.2-dia. hole<br>4 (11)<br>59 max. 7<br>(80.9 max.)* 2 (12) 2<br>5-M3.5×7 4 8 max . 3 (14)<br>39.5 [±0.1]<br>3.5-dia. hole 4<br>39.5<br>5<br>85.5 max. 35.5 (A1)(A2) 1 M3 or 3.5-dia. hole<br>(Top View)<br>Note: Figures in parentheses (Top View)<br>indicate DIN standard<br>*When mounted numbers. Note: Track mounting is also possible.<br>4 16 on H3RN-1@.<br>11.5<br>61 max.<br>**----- End of picture text -----**<br> **8** **Common Sockets** **==> picture [511 x 599] intentionally omitted <==** **----- Start of picture text -----**<br> Dimensions Terminal Arrangement/Internal Connections Mounting Hole Dimensions<br>P2RF-08<br> (Two Poles) 7 [±0.2] 2<br>4.2-dia. hole<br>8-M3.5×8<br>9.5<br>4 dia.<br>6 3<br>5 4 30 [±0.05]<br>71.5 max . 35.5 4<br>M3 (M3 x 16)<br>7 2 or 3.2-dia. hole<br>8 1<br>4 19.5 (Top View)<br>19.5 max. 3 0 max .<br>5 4 max . (Top View) Note: Track mounting is also possible.<br>P2RFZ-08-E<br>(Two Poles)<br>(Finger Protection Structure) 3.2-dia. hole<br>8-M3X8 48 max. 2<br>6 3 10.5<br>2<br>7 2<br>5 4<br>39.5±0.1<br>(42.3)<br>39.5<br>78.5 max. M3 or<br>8 1 3.5-dia. hole<br>(35.8)<br>3.5-dia.<br>hole 35.5<br>(Top View)<br>(Top View)<br>17.2<br>4<br>16 max. 31 max. Note: Track mounting is also possible.<br>61 max.<br>P2RF-08-E<br>(Two Poles)<br>(Finger Protection Structure)<br>6 [+0.2] −0.1 (21) 6 3 (11)<br>(22) 7 2 (12) 3.2-dia. hole<br>63 max. 5 4 7<br>1.5 (84.9 max.) [*] 2 (24) (14)<br>2 8-M3×8 4 8 max .<br>3 dia.<br>39.5 [±0.1]<br>3.5-dia. hole 8 (A1) 4<br>39.5 (A2) 1<br>85.5 max. 35.5 (Top View) M3 or 3.5-dia. hole<br>Note: Figures in (Top View)<br>parentheses<br>indicate DIN<br>4 1 6 11.5 *on H3RN-2When mounted @. standard numbers. Note: Track mounting is also possible.<br>6 1 max .<br>**----- End of picture text -----**<br> **Note:** If an I/O SSR or Indicator Module is used, the polarity of terminal 1 is negative. **9** **Common Sockets** ## **Accessories for Screw Terminal Sockets (P2RFZ-** @ **-E) Short Bars** |**Applicable**<br>**models**|**Appearance**|**Dimensions (mm)**|**Model**| |---|---|---|---| |P2RFZ-05-E<br>P2RFZ-08-E|.|2.9<br>2.5 max.<br>15.4 max.<br>8.7 max.<br>~~9~~<br>6.8±0.1<br>15.7±0.1<br>~~152.7 max.~~<br>~~Dead Gabe Cale Cl Ghd~~ ~~Gd Gn Ged Ge~~<br>~~Gen~~<br>~~LT |~~<br>a|**P2DN-6.8-100S**| |||15.7±0.1<br>2.9<br>2.5 max.<br>1.6-dia.<br>15.4 max.<br>8.7 max.<br>~~9~~<br>~~152.7 max.~~<br>~~|Ma~~<br>~~ao~~<br>~~of~~<br>~~Ra~~<br>~~/~~o~~p~~<br>~~op~~<br>~~oA~~<br>~~tp~~<br>~~op~~<br>~~OM~~|**P2DN-15.7-100S**| **Note:** Each Short Bar set comes with 20 Caps. ## **Accessories for Short Bars (P2DN) Cap** > **Applicable models** ~~ee~~ **Appearance Dimensions (mm) Model** ~~5.2 max.~~ 4 max. P2RFZ-05-E **P2DN-CP100** P2RFZ-08-E 6 max. ~~ae~~ **10** **Common Sockets** ## **P2R** ## **(Unit: mm)** **==> picture [511 x 553] intentionally omitted <==** **----- Start of picture text -----**<br> Dimensions Terminal Arrangement/ PCB Dimensions<br>Internal Connections<br>P2R-05P (One Pole) 4<br>Five, 1.6-dia. holes<br>14.5 max. 7.5 3.5<br>1 3 6<br>6 4 4.5<br>35.5 max. 1.2 3.54.515 2 15<br>4<br>1 4<br>1.5 5 (5)<br>4 7 7<br>3 6.5 max . (Bottom View) (Bottom View)<br>P2R-08P (Two Poles)<br>7.5<br>14.5 max. 7.5 3.5 Eight, 1.3-dia holes<br>0.3 4 5<br>5 3 6 5<br>35.5 max. 1 2.85 20 2 7 5<br>20<br>1 8<br>1.5 (4.3)<br>7.5<br>3 6.5 max . (Bottom View) (Bottom View)<br>P2R-057P (One Pole)<br>14 max. 16.4 4 [±0.1]<br>0.7 8.7 1 10.4 3.5 1 Five, 1.6-dia. holes<br>37 max.29.6 64.515 3 4 4.5 [±0.1] 6 [±0.1]<br>4 2 15 [±0.1]<br>1 8.75<br>4 [±0.1]<br>8.7 7.4 1 (8.75)<br>5<br>7 [±0.1]<br>4 7<br>4 1 max . (Bottom View) (Bottom View)<br>P2R-087P (Two Poles)<br>14 max. 16.4<br>7.5 1 10.4 3.5 0.3 7.5 Eight, 1.3-dia holes<br>5 4 5<br>37 max.29.1 1 5 20 32 67 55<br>8.1 20<br>8.9 7.4 1 8<br>(8.1)<br>7.5<br>41 max. (Bottom View) (Bottom View)<br>**----- End of picture text -----**<br> **Note:** If an I/O SSR or Indicator Module is used, the polarity of terminal 1 is negative. **11** **Common Sockets** ## **P2R** ## **(Unit: mm)** **==> picture [511 x 299] intentionally omitted <==** **----- Start of picture text -----**<br> Dimensions Terminal Arrangement/Internal Connections Mounting Hole Dimensions<br>P2R-05A (One Pole)<br>7.5 4.5<br>14.5 max.<br>1.2 0.3 3<br>4<br>6.7 2<br>35.5 max. 5 16.7<br>3.8<br>1 5<br>Five, 3 x 1.8-dia. holes<br>13.6 [±0.1]<br>6<br>(Bottom View)<br>3 6.5 max .<br>P2R-08A (Two Poles) 30.5 [+] 0 [0.2]<br>7.5<br>14.5 max. 6.5<br>1.2 0.3 4 5 (Use panel with thickness of<br>5 3 6 1.6 to 2.0 mm.)<br>5 2 7<br>35.5 max.<br>2.6 2.8 20<br>1 8<br>Eight, 3 x 1.2-dia. holes 1.5<br>7.5<br>(Bottom View)<br>3 6.5 max .<br>**----- End of picture text -----**<br> **Note:** If an I/O SSR or Indicator Module is used, the polarity of terminal 1 is negative. ## **P7TF** ## **(Unit: mm)** **==> picture [511 x 195] intentionally omitted <==** **----- Start of picture text -----**<br> Dimensions Terminal Arrangement/Internal Connections Mounting Hole Dimensions<br>12.5 [±0.2]<br>P7TF-05<br>M3 or M4 [*]<br>19 max.<br>7 -0 [+0.2]<br>5-M3.5×8<br>4 62 [±0.1]<br>3 2<br>71.5 max. 35.5<br>1 M3<br>5 (Top View)<br>Note: Track mounting is also possible.<br>4 9 * We recommend that you use washers<br>if you use M3 bolts or screws.<br>12.5 [±0.2] 1 9.5 (Top View) Washers are not required with M4<br>60.5 max. bolts or screws.<br>**----- End of picture text -----**<br> **Note:** If an I/O SSR or Indicator Module is used, the polarity of terminal 1 is positive. **12** **Common Sockets** ## **PYFZ/PYF** **(Unit: mm)** **==> picture [511 x 551] intentionally omitted <==** **----- Start of picture text -----**<br> Terminal<br>Dimensions Arrangement/Internal Mounting Hole Dimensions<br>Connections<br>PYFZ-08 PYFZ-08-E<br>Two M3 or M4<br>(Finger Protection Structure) or 4.5-dia. holes<br>Two, 4.2 × 5 6 − [+0.2] 0.1 Two, 4.2 × 5 −6 [+0.2] 0.1<br>mounting holes 8-M3×8 mounting holes 8-M3×8 4 1<br>8 5<br>59 [±0.3]<br>72 max . 35.4 72 max. 35.4<br>12 9<br>14 13<br>15 [±0.2]<br>(Top View)<br>(Top View)<br>4 4<br>23 max. 30 max. 6 23 max. 31 max. 6 Note: Track mounting is also possible.<br>PYF08A [*] [1] PYF08A-E [*] [1]<br>Two M3 or M4<br>(Finger Protection Structure) or 4.5-dia. holes<br>Two, 4.2 × 5 −6 [+0.2] 0.1 3.4 Two, 4.2 × 5 −6 [+0.2] 0.1 3.4<br>mounting holes 8-M3×8 mounting holes 8-M3×8<br>4 1<br>8 5<br>59 [±0.3]<br>72 max. 35.4 72 max. 35.4<br>12 9<br>14 13 15 [±0.2]<br>(Top View)<br>4 4 4 (Top View)<br>23 max. 3 0 max . 6 23 max. 31 max. 6 Note: Track mounting is also possible.<br>PYF08M 8-M3.5×7.5<br>3 dia.<br>7 [±0.2] 4 1 3.5-dia. hole<br>8 5<br>33.5 max.<br>12 9<br>20 [±0.1] 3.5-dia. or M3 hole<br>14 13<br>4 4.5 max . 1.5<br>18 max. (Top View)<br>3.5-dia. mounting holes<br>6.5-dia. countersinking, depth: 11.5<br>PYF11A Two, 4.2 × 5 mounting holes −6 [+0.2] 0.1 3.4 Two M3 or M4 or 4.5-dia. holes<br>11-M3×8<br>3 2 1<br>6 5 4 59 [±0.3]<br>72 max. 35.4<br>9 8 7<br>4 11 10 22 [±0.2]<br>(Top View)<br>29.5 max. 6 (Top View) Note: Track mounting is also<br>3 0 max16.5 . possible.<br>**----- End of picture text -----**<br> - *1. Scheduled to be discontinued in March 2021. **13** **Common Sockets** ## **PYFZ/PYF** **(Unit: mm)** **==> picture [511 x 341] intentionally omitted <==** **----- Start of picture text -----**<br> Terminal<br>Dimensions Arrangement/Internal Mounting Hole Dimensions<br>Connections<br>PYFZ-14 PYFZ-14-E<br>Two M3 or M4<br>(Finger Protection Structure) or 4.5-dia. holes<br>Two, 4.2 × 5 mounting holes −6 [+0.2] 0.1 14-M3×8 Two, 4.2-dia × 5 mounting holes 6 − [+0.2] 0.1 14-M3×8 3 2 1<br>8 7 6 5<br>59 [±0.3]<br>72 max. 35.4 72 max. 35.4<br>12 11 10 9<br>4 14 13 22 [±0.2]<br>(Top View)<br>4 4 (Top View)<br>6 6 Note: Track mounting is also<br>29.5 max. 30 max. 29.5 max. 31 ma x. possible.<br>PYF14A [*] [1] PYF14A-E [*] [1]<br>Two M3 or M4<br>(Finger Protection Structure) or 4.5-dia. holes<br>Two, 4.2 × 5 mounting holes −6 [+0.2] 0.1 3.4 Two, 4.2-dia × 5 mounting holes −6 [+0.2] 0.1 3.4<br>14-M3×8 14-M3×8 3 2 1<br>8 7 6 5<br>59 [±0.3]<br>72 max. 35.4 72 max. 35.4<br>12 11 10 9<br>4 14 13 22 [±0.2]<br>(Top View)<br>4 4 4 (Top View)<br>6 6 Note: Track mounting is also<br>29.5 max. 16.5 29.5 max. 16.5 possible.<br>3 0 max . 3 1 max .<br>**----- End of picture text -----**<br> - *1. Scheduled to be discontinued in March 2021. ## **Relay Sockets and Short Bars for PYFZ/PYF** ## **Bridges within the Same Socket** **==> picture [511 x 155] intentionally omitted <==** **----- Start of picture text -----**<br> Pitch Applicable models Appearance Dimensions (mm) Model Specifications<br>7<br>PYD-020B @( 2P)<br>Max. carry current: 20 A (18 A at 70°C)<br>3.2 Ambient operating temperature: -40 to 70°C (with no<br>icing or condensation)<br>7 PYFZ-14 5.6 Ambient operating humidity: 45% to 85% (with no<br>mm PYF14A icing or condensation)<br>7 7 Conductor material: Brass<br>Conductor surface treatment: Nickel plating<br>Package qty: 50/bag<br>PYD-030B @( 3P)<br>3.2<br>5.6<br>**----- End of picture text -----**<br> **Note:** The @ in the model number is replaced with the insulation color specification code. B: Black, Y: Yellow **14** **Common Sockets** ## **Bridges between Adjacent Sockets** **==> picture [506 x 289] intentionally omitted <==** **----- Start of picture text -----**<br> Pitch Applicable models Appearance Dimensions (mm) Model [*] [1] Specifications<br>22 40°<br>PYD-025B @( 2P)<br>Max. carry current: 20 A (18 A at 70°C)<br>3.3 Ambient operating temperature: -40 to 70°C (with no<br>22 PYFZ-08 ar 5.6 a icing or condensation)Ambient operating humidity: 45% to 85% (with no<br>mm PYF08A [*] [2] 154 icing or condensation)<br>22 40° Conductor material: Brass<br>Conductor surface treatment: Nickel plating<br>PYD-085B @( 8P) Package qty: 10/bag<br>3.3<br>5.6<br>my ear 29 40°<br>PYD-026B @( 2P)<br>Max. carry current: 20 A (18 A at 70°C)<br>3.3 Ambient operating temperature: -40 to 70°C (with no<br>29 PYFZ-14 5.6 icing or condensation)Ambient operating humidity: 45% to 85% (with no<br>mm PYF14A [*] [2] coer aeee 203 icing or condensation)<br>29 40° Conductor material: Brass<br>Conductor surface treatment: Nickel plating<br>PYD-086B @( 8P) Package qty: 10/bag<br>3.3<br>an 5.6<br> The @ in the model number is replaced with the insulation color specification code. B: Black, S: Blue, R: Red@ in the model number is replaced with the insulation color specification code. B: Black, S: Blue, R: Red in the model number is replaced with the insulation color specification code. B: Black, S: Blue, R: Red<br>Ra ane<br>**----- End of picture text -----**<br> - *1. The @ in the model number is replaced with the insulation color specification code. B: Black, S: Blue, R: Red@ in the model number is replaced with the insulation color specification code. B: Black, S: Blue, R: Red in the model number is replaced with the insulation color specification code. B: Black, S: Blue, R: Red - *2. Scheduled to be discontinued in March 2021. ## **Terminal Covers for PYFZ-08/PYFZ-14** **==> picture [238 x 118] intentionally omitted <==** **----- Start of picture text -----**<br> Applicable<br>models Appearance Model<br>| ti“(t;wsésCsisiszC<br>PYCZ-C08<br>PYFZ-08<br>(2 pcs/set)<br>PYCZ-C14<br>PYFZ-14<br>(1 pcs/set)<br>**----- End of picture text -----**<br> **Note:** These covers cannot be used for PYF08A and PYF14A. Use these covers in a combination with PYFZ-08 and PYFZ-14. ## **Dimensions with terminal cover** **==> picture [193 x 101] intentionally omitted <==** **----- Start of picture text -----**<br> PYCZ-C08<br>72 max.<br>O 23 max. o 33 max.<br>**----- End of picture text -----**<br> **==> picture [44 x 8] intentionally omitted <==** **----- Start of picture text -----**<br> PYCZ-C14<br>**----- End of picture text -----**<br> **==> picture [46 x 10] intentionally omitted <==** **----- Start of picture text -----**<br> (Unit: mm)<br>**----- End of picture text -----**<br> **==> picture [101 x 61] intentionally omitted <==** **----- Start of picture text -----**<br> 72 max.<br>se 29.5 max. r I 34 max.<br>**----- End of picture text -----**<br> **15** omRON ~~a~~ **Common Sockets** ## **PY** ## **(Unit: mm)** ||**Dimensions**|||**Terminal**<br>**Arrangement/**<br>**Internal**<br>**Connections**|**Mounting hole and PCB dimensions**|**Mounting hole and PCB dimensions**|**Mounting hole and PCB dimensions**|**Mounting hole and PCB dimensions**|**Mounting hole and PCB dimensions**| |---|---|---|---|---|---|---|---|---|---| |5<br>*The PY08-Y@includ<br>the part outlined by t<br>dashed lines above.<br>**PY08**<br>**PY08-Y1 (L = 42 max.)**<br>**PY08-Y13 (L = 60 max.)**|L<br>2<br>2.7<br>*<br>Ei<br>es<br>he|0 max.<br>ght, 3 x 1.2 ellipses<br>7.7<br>24 m<br>2|ax.<br>.6<br>25.5 max.<br>29.5 max.|1<br>4<br>5<br>8<br>9<br>12<br>13<br>14<br>(Bottom View)|6<br>5<br>25.||||4.1<br>12.65<br>6.35<br>Eight, 1.3-dia holes| |||||||8±0.2|||| ||||||||13.2<br>21.4+0.2<br>0||| |5<br>*1. The PY08QN(2)-Y1 includes the par<br>outlined by the dashed lines above.<br>*2. The figures in the parentheses are fo<br>the PY08QN2(-Y1).<br>**PY08QN**<br>**PY08QN2**<br>**PY08QN-Y1**<br>**PY08QN2-Y1**|*1|~~4~~1.5 max~~.~~<br>36.5 max.)*2<br>(20)*2<br>25<br>22 m<br>24 m<br>1|ax.<br>ax.<br>29.5 max.||||||| ||~~4~~2 max~~.~~<br>(<br>2.7<br>t<br>r||||||||| |||||||.8|||| |**PY08-02**<br>* The structure does not resist flux. Manual<br>soldering is recommended for this product.|16<br>2.7|.5 max.<br>4.3<br>0.3<br>22|max.<br>25.5 max.<br>2<br>1.0<br>29.5 max.||||||| ||||||||||| |||||||.4|||| ||||||||4.2||| |5<br>*The PY11-Y1 includes<br>part outlined by the da<br>lines above.<br>**PY11**<br>**PY11-Y1**|*<br>E|20 max.<br>leven, 3 x 1.2 ellipses<br>7.7<br>24 m|ax.<br>2.6<br>25.5 max.<br>29.5 max.|2<br>1<br>3<br>5<br>4<br>6<br>8<br>7<br>9<br>10<br>11<br>(Bottom View)|6.<br>5.<br>25.8||||4.1<br>12.65<br>6.35<br>Eleven, 1.3-dia holes| ||~~4~~2 max~~.~~<br> <br>2.7<br>the<br>shed|||||±0.2|||| ||||||||13.2<br>21.46+0.2<br>0||| |5<br>*1. The PY11QN(2)-Y1 includes the<br>outlined by the dashed lines abo<br>*2. The figures in the parentheses a<br>the PY11QN2(-Y1).<br>**PY11QN**<br>**PY11QN2**<br>**PY11QN-Y1**<br>**PY11QN2-Y1**|*1|22<br>24<br>~~4~~1.5 max~~.~~<br>(36.5 max.)*2<br>(20)*2<br>25<br>1|max.<br>max.<br>29.5 max.||||||| ||~~4~~2 max~~.~~<br> <br>2.7<br>part<br>ve.<br>re for||||||||| |||||||8|||| |**PY11-02**<br>* The structure does not resist flux. Manual<br>soldering is recommended for this product.|2.7<br>16|4.3<br>0.3<br>22<br>.5 max.|max.<br>25.5 max.<br>2<br>1.0<br>29.5 max.||||||| ||||||||||| ||||||||||| |||||||4|||| ||||||||4.2||| **16** **Common Sockets** **==> picture [511 x 283] intentionally omitted <==** **----- Start of picture text -----**<br> Terminal<br>Dimensions Arrangement/Internal Mounting hole and PCB dimensions<br>Connections<br>PY14 * Fourteen, 3 x 1.2 ellipses<br>PY14-Y1 (L = 42 max.) 25.5 max.<br>PY14-Y3 (L = 60 max. ) 5 29.5 max.<br>25.8 [±0.2]<br>*The PY14-Y@ includes 2.7 7.7 2.6<br>the part outlined by the<br>dashed lines above. L 20 max. 24 max. 21.4 0 [+0.2]<br>PY14QN 1<br>PY14QN2 *1 29.5 max.<br>PY14QN-Y1 (L = 42 max.) 5 1 2 3 4<br>PY14QN2-Y1 (L = 42 max.) 2.7 (20)25 [*][2] 22 max. 5 6 7 8<br>PY14QN-Y3 PY14QN2-Y3(L = 60 max.) (L = 60 max.) L (36.5 max.) 4 1.5 max . [*][2] 24 max. 9 10 11 12<br>*1. The PY14QN-Y@ and PY14QN2-Y@ include the part outlined 13 14 13.2<br>by the dashed lines above.<br>*2. The figures in the parentheses are for the PY14QN2(-Y@). (Bottom View) 4.4<br>5.8<br>PY14-02 1.0 4.1<br>* The structure does not resist flux. Manual soldering is recommended for this product. 0.3 25.5 max. 6.35 12.65<br>29.5 max. 6.4<br>Fourteen<br>4.2 1.3-dia. holes<br>2.7 4.3 22 max. 2<br>16.5 max.<br>**----- End of picture text -----**<br> - **Note: 1.** Use a panel with a thickness of 1 to 2 mm when mounting a Socket on it. **2.** You can use the PY14-Y1 or PY14QN-Y1 for the MY4 Series, MY4H, MYQ4(Z), or MY2K. **3.** You can use the PY14-Y3 or PY14QN-Y3 for H3Y Timers. **17** **Common Sockets** ## **PTF** ## **(Unit: mm)** **==> picture [511 x 692] intentionally omitted <==** **----- Start of picture text -----**<br> Dimensions Terminal Arrangement/Internal Connections Mounting Hole Dimensions<br>PTF08A Two, 4.5 × 6 mounting holes 7 [±0.2] 3.4<br>8-M3.5×8<br>78.5 max. 35.4<br>Two, 4.5 dia. or<br>M4 mounting holes<br>2 1<br>28.5 max. 8 4 3<br>3 0 max .<br>PTF08A-E (Finger Protection Structure) 68 [±0.3]<br>Two, 4.5 × 6 mounting holes 8-M3.5×8 3.4 6 5<br>8 7<br>(Top View) 19 [±0.2]<br>(Top View)<br>78.5 max. 35.5<br>Note: Track mounting is also<br>possible.<br>8<br>28.5 max.<br>3 3 max .<br>PTF11A Two, 4.5 × 6 mounting holes<br>Two, 4.5 × 6 7 [±0.2] 3.4<br>mounting holes<br>11-M3.5×8<br>3 2 1<br>6 5 4<br>68 [±0.3]<br>78.5 max. 35.4<br>9 8 7<br>11 10<br>27.5 [±0.2]<br>3 7 max . 8 (Top View) (Top View)<br>3 0 max . Note: Track mounting is also possible.<br>PTF14A Two, 4.5 × 6 mounting holes 7 [±0.2] 3.4<br>14-M3.5×8<br>78.5 max. 35.4<br>Two, 4.5 dia. or M4 mounting holes<br>4 3 2 1<br>4 5.5 max . 8 8 7 6 5<br>3 0 max .<br>PTF14A-E (Finger Protection Structure) 68 [±0.3]<br>Two, 4.5 × 6 mounting holes 7 [±0.2] 3.4 12 11 10 9<br>14-M3.5×8<br>14 13<br>(Top View) 36 [±0.2]<br>(Top View)<br>78.5 max. 35.5<br>Note: Track mounting is also possible.<br>4 5.5 max . 8<br>3 3 max .<br>**----- End of picture text -----**<br> **Note:** If you use the PTF08A, PTF08A-E, or PT08 with an LY1 Relay, connect the following terminal pairs: 1-2, 3-4, and 5-6 (for usage at 10 A or higher). **18** **Common Sockets** ## **PT** **(Unit: mm)** **==> picture [511 x 480] intentionally omitted <==** **----- Start of picture text -----**<br> Terminal<br>Dimensions Arrangement/Internal Mounting hole and PCB dimensions<br>Connections<br>PT08 PT08QN<br>5 1.5×1.0<br>0.3 25.5 29.5<br>1.0 max. max. 25.8 [±0.2]<br>25.5 29.5<br>max. max. 9 2.5<br>2.7 20 1.5 2<br>2.7 24 max. 2 3 5 max . 24 max. 1 2 21.4 0 [+0.2]<br>20.5 max. Eight, 1.7-dia × 3.5 oblong holes 3 4<br>PT08-0<br>5 6<br>*Maintain a sufficient distance from the<br>2 pattern when using double-sided PCBs. 7 8 1 5.6<br>• The structure does not resist flux. 1 0<br>Manual soldering is recommended for<br>0.3 this product. (Bottom View) 5.35 4.6<br>12.45<br>29.5 max. 6.45<br>2 5 [*] 6.5 6.5<br>1 4.3 3 Eight, 2.5-dia. holes<br>22 max.<br>18 max. (±0.1 tolerance)<br>PT11 PT11QN<br>0.3<br>1.5×1.0<br>5<br>Eleven, 1.7-dia × 3.5 holes 1.5 30.6 32 max.<br>31 [±0.2]<br>30.6 32 max. 2.7 9 2.5 20 1.0<br>3 5 max . 1.2 26.4<br>26.6 0 [+0.3]<br>2.7 1.2 26.4 29.5 max.<br>10 7 4 1<br>20.5 max. 29.5 max.<br>8 5 2<br>PT11-0<br>*Maintain a sufficient distance from the 11 9 6 3 12.45<br>0.3 pattern when using double-sided PCBs. 6.45 4.6<br>• The structure does not resist flux. Eleven,<br>Manual soldering is recommended for 5.2 2.5-dia. holes<br>this product. (Bottom View)<br>10<br>21.4<br>2 5 [*] 32 max. 10<br>5.8<br>2.7 4.3 6.2 6.2 5.65<br>18 max. 29.5 max. (±0.1 tolerance)<br>**----- End of picture text -----**<br> **19** **Common Sockets** **==> picture [511 x 292] intentionally omitted <==** **----- Start of picture text -----**<br> Terminal<br>Dimensions Arrangement/Internal Mounting hole and PCB dimensions<br>Connections<br>PT14 PT14QN<br>0.3<br>1.5×1.0<br>5<br>Fourteen, 1.7-dia × 3.5 holes<br>42.5 max.<br>1.5 41 [±0.2]<br>42.5 max.<br>9 2.5<br>2.7 20 1.0<br>3 5 max .<br>26.5 max. 26.6 0 [+0.3]<br>2.7 29.5 max. 13 9 5 1<br>26.5 max.<br>20.5 max. 29.5 max. 10 6 2<br>PT14-0 *Maintain a sufficient distance from the 11 7 3 12.45 4.6<br>0.3 pattern when using double-sided PCBs. 6.45<br>• The structure does not resist flux. 14 12 8 4<br>Manual soldering is recommended for 5.1 5.8<br>this product.<br>(Bottom View) 10<br>31.4 10<br>4 2.5 max.<br>2 5 [*] 10<br>Fourteen,<br>2.5-dia. holes<br>2.7 4.3 6.4<br>6.4 5.45<br>17.5 max. 26.5 max. (±0.1 tolerance)<br>29.5 max.<br>**----- End of picture text -----**<br> **Note:** Use a panel with a thickness of 1 to 2 mm when mounting a Socket on it. ## **P7LF** ## **(Unit: mm)** **==> picture [511 x 193] intentionally omitted <==** **----- Start of picture text -----**<br> Dimensions Terminal Arrangement/Internal Connections Mounting Hole Dimensions<br>P7LF-06<br>2-M3.5×6 (coil side) 8 [±0.05]<br>51.5 max.<br>0 1 Two, 4.5 dia. or<br>M4 mounting holes<br>(contact side)4-M4×8 9.2 [±0.05] 25 5<br>40 [±0.1] 4 6 max . 40 [±0.1]<br>5 5.5 max . 2 4 6 8<br>(Top View)<br>**----- End of picture text -----**<br> **20** **Common Sockets** ## **PF** **(Unit: mm)** ||||**Dimensions**|||**Terminal Arrangement/**<br>**Internal Connections**|**Mounting Hole Dimensions**| |---|---|---|---|---|---|---|---| |**PF083A**|52<br>8-|M3.5×7|3.5<br>33<br>Two,<br>4.2 dia. ho<br>7±0.2<br>max~~.~~|les|x.<br><br>35.4<br>4|2<br>1<br>8<br>7<br>3<br>4<br>5<br>6<br>(Top View)|33±0.2<br>Two M4 or 4.5-dia. holes<br>**Note:**Track mounting is also<br>possible.| |||max.|||||| |||4<br>~~4~~1|||||| |||||21 ma<br><br>|||| |**PF083A-E**|4<br>52<br>8-|M3.5×7|max.<br>23<br>7±0.2<br>Two, 4.2-dia<br>mounting ho<br>8 25 di<br>3.<br>33|<br>les<br>a.<br><br>|x.<br>2<br>4<br>35.4||| |||max.|||||| |||41<br><br>|||||| |||||21 ma<br><br>|||| |**PF085A**|58|8-M3.5×7|7±0.2<br>Two,<br>4.5 dia. hol|es|4<br>35.4<br>ax.<br>2|6<br>5<br>4<br>3<br>7<br>8<br>1<br>2<br>(Top View)|| |||max.|||||| ||||||||| ||||3±0.2<br>1.<br>max~~.~~||||| |||3<br>4<br>~~4~~0|||||| |||||21.6 m<br><br>3.5|||| |**PF113A**|11-M3.5<br>4<br>52 m|22<br>×7|7±0.2<br>3.5<br>max~~.~~<br>4<br>4|~~3~~1 m<br>2<br>|4<br>ax.<br>35.4|2<br>3<br>1<br>11<br>10<br>9<br>5<br>4<br>6<br>7<br>8<br>(Top View)|34±0.2<br>Two M4 or 4.5-dia. holes<br>**Note:**Track mounting is also<br>possible.| |||ax.|||||| |||43<br>3<br>5|||||| |52<br>4<br>**PF113A-E**|1|1-M3.5×5|8<br>7±0.2<br>23<br>2.8|~~3~~1 m<br>5<br>3.|ax~~.~~<br>.5<br>5<br>35.4<br>4||| ||4<br>max.<br>||||||| |||.2|||||| |||5.2<br><br>4|||||| - **Note: 1.** For the PF083A and PF113A, the Socket key slot is on the top. (Applicable model: MK) **2.** The structure of @ -E models provides finger protection. Round terminals cannot be used. Use forked crimp terminals. **21** **Common Sockets** ## **P2CF** ## **(Unit: mm)** |||**Dimensions**|||**Terminal Arrangement/**<br>**Internal Connections**|**Mounting Hole Dimensions**| |---|---|---|---|---|---|---| |70<br>**P2CF-08**|8-M3.5×7.5|Two,<br>4.5 dia. holes<br>7.8<br>3<br>0 max.||max.<br>4.5<br>35.4|6<br>5<br>4<br>3<br>7<br>8<br>1<br>2<br>(Top View)|40±0.2<br>Two M4 or 4.5-dia. holes<br>**Note:**Track mounting is also<br>possible.| ||||20.3<br>|||| ||max.|||||| |||||||| ||4<br>5|||||| |70<br>**P2CF-08-E**|8-M3.5×7.5|1<br>2<br>4<br>3<br>E<br>AC<br>E<br>Two,<br>4.5 dia. holes<br>7.8<br>1.<br>3<br>0 max.<br>40±0.2|5|max.<br>0.3<br>19<br>4.5<br>35.4||| ||7<br>8<br>6<br>5<br>P2CF-08-<br>10A250V<br>RESISTIV<br>max.|4<br>3<br>E|21.5<br>2<br><br>3<br>|||| |||1<br>2<br>AC<br>E||||| ||4<br>5<br>|||||| |70<br>1<br>**P2CF-11**|1-M3.5×7.5|0 max.<br>Two,<br>4.5 dia. holes<br>7.8<br>3||2 max.<br>4.5<br>35.4|8<br>7<br>6<br>5<br>10<br>11<br>1<br>2<br>4<br>3<br>9<br>(Top View)|40±0.2<br>Two M4 or 4.5-dia. holes<br>**Note:**Track mounting is also<br>possible.| ||||31.|||| ||max.|||||| |||||||| ||4<br>5|||||| |70<br>1<br>**P2CF-11-E**|7<br>8<br>1-M3.5×7.5|1<br>2<br>6<br>5<br>3<br>4<br>1-E<br>AC<br>VE<br>0 max.<br>40±0.2<br>Two,<br>4.5 dia. holes<br>7.8<br>1.2<br>3<br>5||2 max~~.~~<br>30<br>4.5<br>35.4||| |||||||| ||9<br>P2CF-1<br>10A250V<br>RESISTI<br>max.|4<br>1-E||||| ||||~~3~~1.<br>|||| |||3<br>AC<br>VE||||| ||10<br>11<br>4<br>5<br>|||||| **22** **Common Sockets** |**PFA**|||||**(Unit: mm)**|**(Unit: mm)**|**(Unit: mm)**| |---|---|---|---|---|---|---|---| |||**Dimensions**||||**Terminal Arrangement/**<br>**Internal Connections**|**Mounting Hole Dimensions**| |**8PFA**|81 max.<br>4<br>8-M3.5×7||5<br>Two,<br>4.5 dia. hole<br>7.8±0.2|s|118<br>max.<br>x.<br>35.4<br>4<br>4|6<br>5<br>4<br>3<br>7<br>8<br>1<br>2<br>(Top View)|40±0.2<br>Two M4 or 4.5-dia. holes<br>**Note:**Track mounting is also<br>possible.| ||||||||| ||||||||| |||||24 ma<br><br>|||| ||||||||| ||||||||| ||||||||| |||~~5~~1 max~~.~~<br>40±0.2|||||| |**8PFA1**|8-M3.5×7<br>93 max.<br>4||7.8±0.2||130<br>max.<br>35.4<br><br>4<br>x.||| ||||5<br>Two,<br>4.5 dia. holes|<br>|||| |||||24 ma|||| ||||||||| ||||||||| ||||||||| ||||||||| |||~~5~~1 max.<br>40±0.2|||||| |**11PFA**|81 max.<br>11-M3.5×7<br>4||7.8±0.2<br>Two,<br>4.5 dia. holes<br>5|<br><br>|35.4<br>4<br>4<br>118<br>max.<br>max~~.~~|8<br>7<br>6<br>5<br>10<br>11<br>1<br>2<br>9<br>4<br>3<br>(Top View)|40±0.2<br>Two M4 or 4.5-dia. holes<br>**Note:**Track mounting is also<br>possible.| ||||||||| ||||||||| ||||||||| |||||~~3~~3.5|||| ||||||||| ||||||||| |||40±0.2<br>~~5~~1 max~~.~~|||||| |81<br>**14PFA**|14-M3.5×7||Two,<br>4.5 dia. h<br><br>7.8±0.2|oles<br><br>5<br>~~3~~3.5|4<br>4<br>max~~.~~<br>35.4 118<br>max.|7<br>14<br>6<br>4<br>3<br>5<br>12<br>8<br>15<br>1<br>2<br>9<br>10<br>11<br>(Top View)|60±0.2<br>Two, 4.5 dia. or M4 mounting holes<br>**Note:**Track mounting is also<br>possible.| ||max.||||||| ||||||||| ||||||||| ||4|60±0.2<br>~~7~~2 max~~.~~|||||| **23** **Common Sockets** ## **P3G/P3GA** ## **(Unit: mm)** **==> picture [511 x 231] intentionally omitted <==** **----- Start of picture text -----**<br> Dimensions Terminal Arrangement/Internal Connections Mounting Hole Dimensions<br>P3G-08 2 7 di a.<br>3 4 5 6<br>45<br>---<br>2 1 8 7<br>Eight,<br>45 4.9 17 M3.5 SEMS screws (Bottom View)<br>Note: The Y92A-48G Terminal Cover can be used to<br>implement finger protection.<br>P3GA-11 2 7 di a.<br>5 6 7 8<br>4<br>45 25.6<br>3 9 ---<br>2 1 11 10<br>Eleven,<br>45 4.5 16.3 6.2 M3.5 SEMS screws (Bottom View)<br>Note: The Y92A-48G Terminal Cover can be used to<br>implement finger protection.<br>**----- End of picture text -----**<br> ## **Terminal Cover (Unit: mm)** **==> picture [327 x 137] intentionally omitted <==** **----- Start of picture text -----**<br> Appearance Dimensions<br>Y92A-48G Twelve, 6.4 dia.<br>34 Y92A-48G UP 47.7 × 47.7 48 × 48<br>P C<br>16.5<br>24.6 27.6<br>47.4<br>**----- End of picture text -----**<br> **24** **Common Sockets** ## **PL** ## **(Unit: mm)** **==> picture [511 x 637] intentionally omitted <==** **----- Start of picture text -----**<br> Dimensions Terminal Arrangement/Internal Connections Mounting hole and PCB dimensions (bottom view)<br>Two, 3.5 dia. or M3 L = 40 mm<br>PL08 3.5 4 1 device mounting holesTwo, 3.5 or M3 MK2(Z)PL = 74 mm<br>Two, Socket mounting holes PU, AMD-S, MM2(X)P, CZ, STP, H3L,<br>2 dia. holes TDS, DTS, DSP, TDF, TDV<br>L = 86 mm<br>50.5 max.40 30 dia. 31-dia. hole 40 [±0.3] L 61F-GP/-APN, G4Q-212S, RD2P, RDA, TDA, AGF, SE, SAD, K2CU,<br>3.9 SDV-F<br>5 0.5 ma x. App20.5rox.<br>PL08-Q 3.5 4 1 4 5 Two 3.5-dia. or<br>t0.6×1.3 3 6 two M3 Socket mounting holes<br>2 7<br>51 max. 40 30 dia. 1 8 31-dia. hole MK2(Z)P<br>40 [±0.3]<br>1 6 (Bottom View)<br>3 5 max . 3 5 max .<br>PLE08-0 1 4 15 t0.3 Two 3.5-dia. Hold-down Clip mounting holes<br>45°<br>29±0.1 dia. 2 7.7±0.5 dia. 040 [+0.1] MK2(Z)P<br>21.5 max. Eight, 2.5-dia. holes<br>PL11 3.5 4 1<br>Two 2-dia.<br>holes<br>51 max. 40 30 dia. Two, 3.5 dia. or M3 device mounting<br>3.9 /Hold-down Clip mounting holes<br>L = 40 mm L = 74 mm<br>Two, 3.5 dia. or M3 MK3P MM3P<br>Socket mounting holes<br>3 5 max . Approx20.5 . MK2KP MK2(X)KP<br>31-dia. hole<br>PL11-Q 3.5 4 1 40 [±0.3] L<br>5 6 7 L = 42 mm<br>MK3ZP<br>t0.6×1.3 4 8<br>MK3LP<br>3 9<br>51 max. 2 10<br>1 11<br>1 6<br>(Bottom View)<br>3 5 max . 3 5 max .<br>PLE11-0 14 15 t0.3 360° Two, 3.5-dia. holes Applicable model/Hold-down Clip mounting holes<br>11 L = 40 mm L = 42 mm<br>MK3P MK3ZP<br>29±0.1 dia. 28.7 [±0.5] L MK2KP MK3LP<br>22 max.<br>Eleven, 2.5-dia. holes<br>PL15 4 4 1 Two, 3.5 dia. or M3<br>device mounting holes<br>MM3XP<br>Two 2-dia. holes 2 312 4 Two, 3.5 dia. or M3 Socket mounting holes MM4(X)PMM3(X)KP<br>66 max. 53 41 max. 1 11 13 5 4.2-dia. hole 74 MM4(X)KP<br>3.9 10 15 14 6<br>9 7<br>8<br>(Bottom View)<br>4 5 max .<br>22 max.<br>53<br>**----- End of picture text -----**<br> **25** **Common Sockets** **==> picture [511 x 121] intentionally omitted <==** **----- Start of picture text -----**<br> Dimensions Terminal Arrangement/Internal Connections Mounting hole and PCB dimensions (bottom view)<br>PL20 Two, 3.5-dia. holes 4 1 Two, 4.5-dia. Relay mounting holes<br>Two, 2 dia. 17 1819 20 12 3 Two, 4-dia. Socket mounting holes<br>46.5 max. 31 max. 16 4 33-dia. hole<br>3.9 15 14 6 5 56 [±0.2]<br>13 12 10 8 7<br>11 9<br>3 6.5 max . 23 max. (Bottom View) * Relay mounting holes are not<br>38 [±0.2] required for the LDNP.<br>**----- End of picture text -----**<br> **Note:** When mounting, pay due attention to the direction of the key groove of applicable Relays. **26** ## Terms and Conditions Agreement ## Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. ## Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http://www.omron.com/global/ or contact your Omron representative for published information. ## Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. ## Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. ## Programmable Products. Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence thereof. ## Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability. ## Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at any time to confirm actual specifications of purchased Product. ## Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. **In the interest of product improvement, specifications are subject to change without notice.** ## **OMRON Corporation** ## **Industrial Automation Company** 2020.5 **http://www.ia.omron.com/** (c)Copyright OMRON Corporation 2020 All Right Reserved.
Updated at June 6, 2026
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →