PVSE 230/24-20

Single phase, primary switched mode power supply, Economy **PVSE 230/24-20** 

## Advantages 

Stabilised and adjustable output voltage Up to 200 % real power boost for 4 seconds Top boost to trip conventional circuit breakers DC OK signalling Stand-by-input Parallel connection option Service-friendly spring-loaded connector system Optional with active inrush current limiter 

## Applications 

Primary switched mode power supply with massive power reserves focussing on the key task of power supply. 

## Simplified diagram 

## Standards Z 

Primary switched mode power supply to UL 60950, UL 508 

## Approvals W oZ 

UL/CSA 60950 recognised, UL508 listed 

Safety: EN 61558-2-16, EN 60950-1 EMC: EN 61204-3 

## Single phase, primary switched mode power supply, Economy **PVSE 230/24-20** 

**==> picture [547 x 468] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||||||
|---|---|---|---|---|---|
|Type|PVSE 230/24-20|Type|PVSE 230/24-20|
|Input|Terminal and mounting|
|Input rated voltage|110 - 240 Vac|Connections input, (spring clamp terminal,|max. 2.5 mm²|
|Input rated current (rated load)|5.7 / 2.3 Aac (110 / 230 Vac)|pluggable)|
|oO|Input voltage range|85 - 264 Vac (120 - 373 Vdc)|oO|Connections output, (spring clamp terminal,|max. 10 mm²|
|xe)©|Rated frequency rangeStarting current limiter|44 Hz - 66 Hz / 0 Hz<8 A, active|xe)i|pluggable)Connections signalling, (spring clamp terminal,|max. 0.5 mm²|
|pluggable)|
|8|Input fuse internal|10 A (slow-blow)|§|Mounting position|vertical|
|8|Recommended back-up fuse (circuit breaker)|10 A, 16 A, characteristics B, C|Fixing method|DIN Rail system TH 35|
|a|Harmonic correction|active|5|
|lw|Mains buffering|20 / 25 ms (110 / 230 Vac)|5oO|Measures and weights|
|Transient surge voltage protection|Varistor|=|Weight|2.30 kg|
|Output|
|h|Output rated voltage|id|24 Vdc ±1 %|<>|
|Output voltage range|22 - 29.5 Vdc|GB|
|Resistance to reverse feed max.|35 Vdc|
|Output rated current|20.00 A|
|Parallel connection|Yes|
|Power Boost|30 A / 4 s (25 A / 8 s)|
|Overload behaviour|Constant current|127.0|
|max. Power loss idling/nominal load|4.8 / 50.2 W|
|Serial operation|Yes|
|Efficiency|typ. 91 %|
|Ripple factor|typ. 70 mVss|
|Top Boost|80 A / 25 ms|76.0|
|Signaling|
|Stand-by-input|Yes|12.5|
|Power Good (DC OK)|LED green, LED red|
|Potential free signal contact|Yes|
|Standards|
|Classification|Primary switched mode power supply|
|Approvals|
|Approvals|cURus, cULus|
|Environment|
|Storage temperature|-25° C to +85° C|
|-3 %/K > +50° C,|
|Derating|
|-1,5 %/Vac < 110 Vac|
|Ambient temperature|-10° C to +70° C|
|Safety and protection|
|Safety class|I, with PE connection|
|Protection index|IP 20|
|Accessory|
|Connector for signalling|PV-CON (optional)|
|Side DIN Rail mounting|PV-TS35M (optional)|
|Direct screw fastening plate for lateral mounting|PV-WB2 (optional)|
|Order numbers|
|Order Number|PVSE 230/24-20|

**----- End of picture text -----**<br>