PVSE 230/12-6

Single phase, primary switched mode power supply, Economy **PVSE 230/12-6** 

## Advantages 

Stabilised and adjustable output voltage Up to 200 % real power boost for 4 seconds Top boost to trip conventional circuit breakers DC OK signalling Stand-by-input Parallel connection option Service-friendly spring-loaded connector system Optional with active inrush current limiter 

## Applications 

Primary switched mode power supply with massive power reserves focussing on the key task of power supply. 

## Simplified diagram 

## Standards Z 

Primary switched mode power supply to UL 60950, UL 508 

## Approvals W oZ 

UL/CSA 60950 recognised, UL508 listed 

Safety: EN 61558-2-16, EN 60950-1 EMC: EN 61204-3 

## Single phase, primary switched mode power supply, Economy **PVSE 230/12-6** 

|Type<br>PVSE 230/12-6|Type|PVSE 230/12-6|
|---|---|---|
|Input<br>Input rated voltage<br>100 - 240 Vac<br>Input rated current (rated load)<br>0.86 / 0.51 Aac (110 / 230 Vac)<br>+-<br>30|Terminal and mounting<br>Connections input, (spring clamp terminal,<br>pluggable)|max. 2.5 mm²|
|Input voltage range<br>85 - 264 Vac (120 - 373 Vdc)<br>Rated frequency range<br>44 Hz - 66 Hz / 0 Hz<br>Starting current limiter<br><30 A, NTC<br>Input fuse internal<br>2 A (slow-blow)<br>Recommended back-up fuse (circuit breaker)<br>6 A, 10 A, 16 A, characteristics B, C<br>Harmonic correction<br>-<br>Mains buffering<br>10 / 70 ms (110 / 230 Vac)<br>Transient surge voltage protection<br>Varistor<br>Connections output, (spring clamp terminal,<br>pluggable)<br>max. 2.5 mm²<br>Connections signalling, (spring clamp terminal,<br>pluggable)<br>max. 0.5 mm²<br>Mounting position<br>vertical<br>Fixing method<br>DIN Rail system TH 35<br>Measures and weights<br>Weight<br>0.80 kg<br>oO<br>oO<br>©<br>i<br>xe)<br>xe)<br>~~8§~~<br>~~8~~<br>5<br>a<br>5<br>lw<br>oO<br>=|||



|Transient surge voltage protection<br>Varistor|Transient surge voltage protection<br>Varistor|
|---|---|
|Output<br>Output rated voltage<br>12 Vdc ±1 %<br>Output voltage range<br>11 - 18 Vdc<br>~~hid~~||
|Resistance to reverse feed max.|25 Vdc|
|Output rated current|6.00 A|
|Parallel connection|Yes|
|Power Boost|12 A / 4 s (9 A / 8 s)|
|Overload behaviour|Constant current|
|max. Power loss idling/nominal load|3.0 / 8.8 W|
|Serial operation|Yes|
|Efficiency|typ. 83 %|
|Ripple factor|typ. 70 mVss|
|Top Boost<br>Signaling<br>Stand-by-input|21 A / 25 ms<br>Yes|
|Power Good (DC OK)|LED green, LED red|
|Potential free signal contact|Yes|
|Standards||
|Classification|Primary switched mode power supply|
|Approvals||
|Approvals|cURus, cULus|
|Environment||
|Storage temperature|-25° C to +85° C|
|Derating|-3 %/K > +50° C,<br>-5 %/Vac < 95 Vac|
|Ambient temperature|-10° C to +70° C|
|Safetyandprotection||
|Safety class|I, with PE connection|
|Protection index|IP 20|
|Accessory||
|Connector for signalling|PV-CON (optional)|
|Side DIN Rail mounting|PV-TS35M (optional)|
|Direct screw fastening plate for lateral mounting|PV-WB2 (optional)|
|Order numbers||
|**Order Number**|**PVSE 230/12-6**|



**==> picture [224 x 70] intentionally omitted <==**

**----- Start of picture text -----**<br>
127.0<br>76.0<br>12.5<br>163.5<br>40.0<br>**----- End of picture text -----**<br>