Image not available
Illustrative purposes only
PVN012ASPBF
Solid State Relay, SPST-NO, 4 A, 20 V, Surface Mount, Solder
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: INFINEON
- Product type:
- Contact Configuration:SPST-NO; Load Current:4A; Operating Voltage Max:20V; Relay Mounting:SMD; Relay Terminals:Solder; Switching Mode:-; Operating Voltage Min:0V; Control Voltage Min:
- Load Current: 4A
- Product Range: HEXFET PVN012A Series
- Relay Mounting: Surface Mount
- Switching Mode: -
- Relay Terminals: Solder
- Control Voltage Max: -
- Control Voltage Min: -
- Contact Configuration: SPST-NO
- Operating Voltage Max: 20V
- Operating Voltage Min: 0V
| Delivery and price | |
|---|---|
| Units per pack | 5 |
| Price | 10.21 € |
| Current stock | 10+ |
| Lead time | 30 days |
Datasheet
## **Series PVN012APbF** LC Microelectronic Power IC HEXFET[®] Power MOSFET Photovoltaic Relay Single-Pole, Normally-Open, 0-20V, 4.0A AC / 6.0A DC ## **General Description** The PVN012A Series Photovoltaic Relay at 50 milliohms features the lowest possible on-state resistance in a miniature package — lower than a comparable reed relay. The PVN012A is a single-pole, normally open solidstate relay. It utilizes a HEXFET **[®]** MOSFET output switch, driven by an integrated circuit photovoltaic generator of novel construction. The output switch is controlled by radiation from a GaAlAs light emitting diode (LED) which is optically isolated from the photovoltaic generator. These units exceed the performance capabilities of electromechanical relays in life, sensitivity, stable onresistance, miniaturization, magnetic insensitivity and ruggedness. They are ideally suited for switching high currents or low level signals without distortion or injection of electrical noise. ## **Features** 50mΩ On-Resistance Bounce-free Operation 4.0 - 6.0 Amp Capacity Linear AC/DC Operation 4,000 VRMS I/O Isolation Solid-State Reliability UL Recognized ESD Tolerance: 4000V Human Body Model 500V Machine Model Series PVN012A relays are packaged in a 6-lead molded DIP package with either thru-hole or surface mount (gull-wing) terminals. They are available in standard plastic shipping tubes or on tape-and-reel. Please refer to part identification information. ## **Applications** Portable Electronics Computers and Peripheral Devices Audio Equipment Power Supplies and Power Distribution Instrumentation ## **Part Identification** PVN012APbF PVN012ASPbF PVN012AS-TPbF thru-hole surface-mount surface-mount, tape and reel _(HEXFET is the registered trademark for International Rectifier Power MOSFETs)_ 1 www.irf.com © 2015 International Rectifier Submit Datasheet Feedback May 12, 2015 ~~= @---- -—~~ Series PVN012APbF ## **Electrical Specifications** (-40°C ≤ TA ≤ +85°C unless otherwise specified) |**Electrical Specifications** (-40°C≤TA≤+85°C unless otherwise specified|**Electrical Specifications** (-40°C≤TA≤+85°C unless otherwise specified|**Electrical Specifications** (-40°C≤TA≤+85°C unless otherwise specified|)|| |---|---|---|---|---| |**INPUT CHARACTERISTICS**<br>|||**Limits**|**Units**| |Minimum Control Current(see figure 1)<br>|||5.0|mA| |Maximum Control Current for Off-State Resistance @ TA= +25°C<br>|||0.4|mA| |Control Current Range(Caution: current limit input LED, see figure 6)<br>|||5.0 to 25.0|mA| |Maximum Reverse Voltage<br>|||6.0|V| |||||| |**OUTPUT CHARACTERISTICS**|||**Limits**|**Units**| |OperatingVoltage Range|||0 to ±20|V(DC or AC peak)| |Maximum Continuous Load Current @ 40°C, 10mA Control (see figure 1)<br>A Connection<br>B Connection<br>C Connection|||4.0|A (DC or AC)| ||B Connection||4.5|A (DC)| ||C Connection||6.0|A(DC)| |Maximum Pulsed Load Current @ 25°C,10mA Control (100 mS @ 10% duty cycle)<br>A Connection<br>B Connection<br>C Connection|||8.0|A (DC or AC)| ||B Connection||9.0|<br>A (DC)| ||C Connection||15.0|A(DC)| |Typical Thermal Resistance (Tthja, Junction-to-Ambient)<br>A Connection<br>B Connection<br>C Connection|||85.1|(oC/W)| ||B Connection||122.9|(oC/W)| ||C Connection||89.7|(oC/W)| |Maximum On-State Resistance @25°C, 10mA Control 100mA pulsed load, (see figs. 3 & 4)||||| ||<br>A Connection<br>B Connection<br>C Connection||50|mΩ| ||||25|mΩ| ||||15|mΩ| |Maximum Off-State Leakage @ TA=+25°C, ±20VDC|||1.0|µA| |Maximum Turn-On Time @TA=+25°C(see figure 7), for 1A, 20 VDCload, 10mA Control|||3.0|ms| |Maximum Turn-Off Time @TA=+25°C(see figure 7), for 1A, 20 VDCload, 10mA Control|||0.5|ms| |Typical Output Capacitance @ 20VDC(see figure 2)|||400|pF| |||||| |**GENERAL CHARACTERISTICS**|||**Limits**|**Units**| |Minimum Dielectric Strength, Input-Output|||4000|VRMS| |Minimum Insulation Resistance, Input-Output|||1012|Ω| |Maximum Capacitance,Input-Output, Vd =0V, f = 1MHz|||1.0|pF| |Maximum Pin Soldering Temperature|||+260|°C| |Ambient Temperature Range:||Operating|-40 to +85|| |||Storage|-40 to +100|| International Rectifier does not recommend the use of this product in aerospace, avionics, military or life support applications. Users of this International Rectifier product in such applications assume all risks of such use and indemnify International Rectifier against all damages resulting from such use. 2 www.irf.com © 2015 International Rectifier Submit Datasheet Feedback May 12, 2015 Series PVN012APbF ## **Connection Diagrams** **==> picture [435 x 103] intentionally omitted <==** **==> picture [400 x 159] intentionally omitted <==** **----- Start of picture text -----**<br> 5.0 1200<br>"A" Connection "A" Connection<br>I LED = 10mA 1000<br>4.0<br>I LED = 5mA 800<br>3.0<br>600<br>2.0<br>400<br>1.0<br>200<br>0.0 0<br>0 20 40 60 80 100 0 5 10 15 20<br>Ambient Temperature (°C) VDD Drain to Drain Voltage<br>Max. Load Current (A) Typical Capacitance (pF)<br>**----- End of picture text -----**<br> **Figure 1. Current Derating Curves*** **Figure 2. Typical Output Capacitance** * Derating of ‘B’ and ‘C’ connections at +85°C will be 70% of that specified at +40°C and is linear from +40°C to +85°C. **==> picture [181 x 149] intentionally omitted <==** **----- Start of picture text -----**<br> 250<br>200<br>150<br>100<br>50<br>0<br>-50<br>-100<br>-150 I LED = 10mA<br>100mS Pulsed, 25°C<br>-200 "A" Connection<br>-250<br>-10 -8 -6 -4 -2 0 2 4 6 8 10<br>Load Current (A)<br>Voltage Drop (mV)<br>**----- End of picture text -----**<br> **Figure 3. Linearity Characteristics** **==> picture [180 x 159] intentionally omitted <==** **----- Start of picture text -----**<br> 2.5<br>"A" Connection<br>10mA Control<br>2 I D = 1A<br>1.5<br>1<br>0.5<br>0<br>-50 -25 0 25 50 75 100 125<br>Ambient Temperature (°C)<br>C)<br> o<br>Rd-on (Normalized to 25°<br>**----- End of picture text -----**<br> **Figure 4. Typical Normalized On-Resistance** 3 www.irf.com © 2015 International Rectifier Submit Datasheet Feedback May 12, 2015 Series PVN012APbF **==> picture [196 x 391] intentionally omitted <==** **----- Start of picture text -----**<br> 100<br>10<br>1<br>0.1<br>-35 -15 5 25 45 65 85 105<br>Ambient Temperature (°C)<br>Figure 5. Typical Normalized Off-State<br>Leakage<br>10<br>ton<br>1<br>tdly<br>0.1<br>toff<br>(10mS Pulse Width, 20V/1A Load)<br>0.01<br>5 10 15 20 25<br>LED Current (mA)<br>C<br>°o<br> 25<br>D-OFF<br>/ I<br>ID-OFF<br>Delay Time (milliseconds)<br>**----- End of picture text -----**<br> **Figure 7. Typical Delay Times** **==> picture [177 x 153] intentionally omitted <==** **----- Start of picture text -----**<br> 20<br>CAUTION:provide current<br>limiting so that 25mA<br>maximum steady state<br>16 co not exceeded. ntrol current rating is<br>12<br>Min. device<br>and +85°C<br>limit TYPICAL<br>8<br>Max.device<br>and -40°C<br>limit<br>4<br>0<br>0 0.5 1 1.5 2<br>LED Forward Voltage Drop (VDC)<br>Input Current (mA)<br>**----- End of picture text -----**<br> **Figure 6. Input Characteristics (Current Controlled)** **==> picture [167 x 141] intentionally omitted <==** **----- Start of picture text -----**<br> ILED<br>90%<br>ID 10%<br>tdelay toff<br>ton<br>**----- End of picture text -----**<br> **Figure 8. Delay Time Definitions** 4 www.irf.com © 2015 International Rectifier Submit Datasheet Feedback May 12, 2015 Series PVN012APbF ## **Case Outlines** **==> picture [433 x 192] intentionally omitted <==** **----- Start of picture text -----**<br> 01-2008 01<br>**----- End of picture text -----**<br> **==> picture [435 x 196] intentionally omitted <==** **----- Start of picture text -----**<br> 01-2009 01<br>**----- End of picture text -----**<br> **Note: For the most current drawing please refer to IR website at:** http://www.irf.com/package/ 5 www.irf.com © 2015 International Rectifier Submit Datasheet Feedback May 12, 2015 Series PVN012APbF |**Qualification information**†|**Qualification information**†|**Qualification information**†| |---|---|---| |Qualification level|Industrial<br>(perJEDEC JESD47I††guidelines)|| |Moisture Sensitivity<br>Level|PVN012APbF|N/A| ||PVN012ASPbF|MSL4<br>(per JEDEC J-STD-020E & JEDEC J-STD-033C††)| ||PVN012AS-TPbF|| |RoHS compliant|<br>Yes|| - Qualification standards can be found at International Rectifier’s web site: http://www.irf.com/product-info/reliability †† Applicable version of JEDEC standard at the time of product release |**Revision History**|| |---|---| |**Date**|**Comments**| |5/11/2015|•Added Qualification Information Table on page 6<br>•Updated data sheet with new IR corporate template| **==> picture [87 x 37] intentionally omitted <==** **IR WORLD HEADQUARTERS:** 101 N. Sepulveda Blvd., El Segundo, California 90245, USA Data and specifications subject to change without notice To contact International Rectifier, please visit http://www.irf.com/whoto-call/ 6 www.irf.com © 2015 International Rectifier Submit Datasheet Feedback May 12, 2015
Updated at June 10, 2026
Infineon Technologies is a globally recognized leader in semiconductor solutions, renowned for driving innovation in power management, energy efficiency, and modern mobility. With a strong legacy of engineering excellence, the company provides highly reliable components designed to meet the rigorous demands of industrial, automotive, and advanced commercial applications. The core of our Infineon portfolio is centered on their industry-leading discrete semiconductors. We offer an extensive selection of single and dual MOSFETs, alongside a robust range of single IGBTs and advanced IGBT modules. These flagship power transistors are essential for high-efficiency power conversion and motor control, providing engineers with superior thermal performance and minimized switching losses. Beyond advanced field-effect transistors, the selection includes a comprehensive array of diodes and rectifiers, heavily featuring Schottky diodes, as well as fast-recovery and RF/PIN diodes. This power foundation is further supported by bipolar transistors, intelligent power modules, and thyristor SCR modules, delivering the critical building blocks required for complex power system designs. To support broader system integration, the portfolio also encompasses specialized solutions such as solid-state relays, AC/DC LED driver ICs, and Bluetooth communications modules. From high-power industrial rectifiers to wireless connectivity adapters, Infineon equips designers with the precision components needed to build efficient, scalable, and fully connected electronic systems.
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 540,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →