PSG240E

**Power￿supply￿unit,￿1-phase,￿100-240VAC/24VDC,￿10A** 

**Part￿no. PSG240E Article￿no. 131670** 

## **Delivery programme** 

|**Deliveryy￿programmerogrammegrammeramme**||||
|---|---|---|---|
|Product range|||Power supplies PSG|
|Phases|||1-phase|
|Input voltage range|||85 - 264 V AC<br>120 - 375 V DC|
|Nominal input voltage|||100 - 240 V AC|
|Rated output voltage|||24 V DC (± 2%)|
|Rated output current||A|10|
|Setting range for the output voltage|||22-28 V DC|
|Rated output power||W|240|



## **Technical￿data** 

## **Input￿characteristics** 

||Nominal input voltage|||100 - 240 V AC|
|---|---|---|---|---|
||Supply frequency||||
||Rated value||Hz|50/60|
||Range||Hz|47 - 63|
||||||
||Nominal current|In|A|2.9 bei 115 V AC, 1.5 bei 230 V AC|
||Mains buffering at nominal load||ms||
||Mains failure bridging||ms|> 20 at 115 V AC|
|||||> 20 at 230 V AC|
||Run-up time after mains voltage applied||ms|1000|
||Internal input fuse (device protection, not accessible)|||T6.3AH/250 V|
||Back-up fuse|||10, 16 A (recommended)|
||Tripping characteristic|||B|
||Leakage Current|||< 3.5 mA|
|**Output￿characteristics**|||||
||Rated output power||W|240|
||Rated output voltage|||24 V DC (± 2%)|
||Tolerance|||±2 %|
||Setting range for the output voltage|||22-28 V DC|
||Nominal current||A|10|
||Derating from Tamb> +50 °C|||2.5 % per Kelvin (> 70 °C: 4 % per Kelvin) temperature increase|
||Capacitive load starting|||Max 10000 µF|
||Heat dissipation||W|42.5|
||Efficiency||%|> normally 84|
||Residual ripple and switching peaks|||20 MHz: < 50 mV/< 240 mVpp|
||Can be switched in parallel|||with ORing Diode|
|**General￿characteristics**|||||
||Housing|||Aluminum (Al5052)|
||Status indication|||DC OK: LED green|
||Height||mm|121|
||Width||mm|85|
||Depth||mm|118.5|
||Weight||kg|1.04|
||Terminations|||Screw connection|
||Stripping length||mm|7|
|||||or suitable cable lug for crimping|



06/08/2015 

131670 - HPL-ED2015 V12.0 EN 

1 / 3 

|Ambient air temperature range||°C||
|---|---|---|---|
|Operation||°C|-20 - +75 (> 50 °C derating)|
|Storage, transport|ϑ|°C||
|Storage|ϑ|°C|-20 - +85|
|damp heat|||< 95 % relative humidity at +25 °C, no condensation|
|Vibrations (IEC/EN 60068-2-6)|||10 – 150 Hz, accel. 50 m/s², 0.35 mm,<br>single amplitude (5 g max.) for 90 min. in X, Y, Z direction|
|Mechanical shock resistance (IEC 60068-2-27)|||30 g (300 m/s²) in all directions|
|Pollution degree|||2|
|Climatic class (IEC)|||3K3 according to EN 60721|
|**Safetyandsafetyfeatures**||||
|Transient overvoltage protection|||Varistor|
|Current limitation at short-circuit|||IÜberstrom= 150 % der max. Ausgangsleistung|
|Overvoltage protection|||Yes, against internal overvoltage|
|Insulation voltage||||
|Input/Output|||4 kV AC (type test), 3 kV AC (routine test)|
|Input/PE|||1.5 kV AC (type test), 1.5 kV AC (routine test)|
|Output/PE|||1.5 kV AC (type test), 500 V AC (routine test)|
|Degree of Protection|||IPX0|
|Protection class|||Class I with PE connection|
|**Standards**||||
||||Electrical equipment of machines: IEC60204-1 (Overvoltage category III)<br>Equipping power installations with electronic apparatus: EN 50178/IEC 62103<br>Safety extra-low voltage: PELV (EN 60204), SELV (EN 60950)<br>Protection against electric shock: DIN 57100-410<br>CE: In conformance with EMC Directive 2004/108/EC and Low Voltage Directive<br>2006/95/EC<br>ITE: EN 55022, EN 61000-3-2, EN 61000-3-3, EN 55024<br>Industrial: EN 55011<br>Mains harmonics limitation: EN 601000-3-2|



## **Design￿verification￿as￿per￿IEC/EN￿61439** 

|**DesignverificationasperIEC/EN61439**||||
|---|---|---|---|
|IEC/EN 61439 design verification||||
|10.2 Strength of materials and parts||||
|10.2.2 Corrosion resistance|||Meets the product standard's requirements.|
|10.2.3.1 Verification of thermal stability of enclosures|||Meets the product standard's requirements.|
|10.2.3.2 Verification of resistance of insulating materials to normal heat|||Meets the product standard's requirements.|
|10.2.3.3 Verification of resistance of insulating materials to abnormal heat<br>and fire due to internal electric effects|||Meets the product standard's requirements.|
|10.2.4 Resistance to ultra-violet (UV) radiation|||Meets the product standard's requirements.|
|10.2.5 Lifting|||Does not apply, since the entire switchgear needs to be evaluated.|
|10.2.6 Mechanical impact|||Does not apply, since the entire switchgear needs to be evaluated.|
|10.2.7 Inscriptions|||Meets the product standard's requirements.|
|10.3 Degree of protection of ASSEMBLIES|||Meets the product standard's requirements.|
|10.4 Clearances and creepage distances|||Meets the product standard's requirements.|
|10.5 Protection against electric shock|||Does not apply, since the entire switchgear needs to be evaluated.|
|10.6 Incorporation of switching devices and components|||Does not apply, since the entire switchgear needs to be evaluated.|
|10.7 Internal electrical circuits and connections|||Is the panel builder's responsibility.|
|10.8 Connections for external conductors|||Is the panel builder's responsibility.|
|10.9 Insulation properties||||
|10.9.2 Power-frequency electric strength|||Is the panel builder's responsibility.|
|10.9.3 Impulse withstand voltage|||Is the panel builder's responsibility.|
|10.9.4 Testing of enclosures made of insulating material|||Is the panel builder's responsibility.|
|10.10 Temperature rise|||The panel builder is responsible for the temperature rise calculation. Eaton will<br>provide heat dissipation data for the devices.|
|10.11 Short-circuit rating|||Is the panel builder's responsibility.|
|10.12 Electromagnetic compatibility|||Is the panel builder's responsibility.|
|10.13 Mechanical function|||The device meets the requirements, provided the information in the instruction<br>leaflet (IL) is observed.|



06/08/2015 

131670 - HPL-ED2015 V12.0 EN 

2 / 3 

**Dimensions** 

## **Additional￿product￿information￿(links)** 

**IL00912003E** 

IL00912003E 

Eaton Industries GmbH http://www.eaton.eu © 04/2015 by Eaton Industries GmbH 131670 - HPL-ED2015 V12.0 EN 

06/08/2015 

3 / 3