PSC-160A-C

## 160W Single Output with Battery Charger(UPS Function) **PSC - 160 series** 

## ■ 

BauarSicherheitbeegelodwacmat geprufto ges g EAL cSALus ~~2)~~ **www.ID 2000000000tuv.com** CBCE ■ Applications 

## ■ 

> ℃ through70 ℃ 

## ■ 

## { 

_File Name:PSC-160-SPEC   2018-01-12_ 

## 160W Single Output with Battery Charger(UPS Function) **PSC - 160 series** 

## **SPECIFICATION** 

|**SPECIFICATION**|**SPECIFICATION**|||||
|---|---|---|---|---|---|
|**OUTPUT**<br>**SAFETY STANDARDS**<br>**MTBF**<br>**DIMENSION**<br>**OTHERS**<br>**PACKING**<br>UL60950-1, TUV EN60950-1<br>approved<br>,EAC TP TC 004<br>Compliance to EN55032 (CISPR32) Class B, EN61000-3-2,-3, EAC TP TC 020<br>Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level,  criteria A, EAC TP TC 020<br>257K hrs min.      MIL-HDBK-217F (25<br>)<br>℃<br>PCB:152.4*76.2*32mm (L*W*H) ; Enclosed type:155.4*85*37mm (L*W*H)<br>PCB:0.35Kg;42pcs/15.7Kg/1.22CUFT ; Enclosed type: 0.45Kg;32pcs/15.4Kg/0.94CUFT<br>**WITHSTAND VOLTAGE**<br>**ISOLATION RESISTANCE**<br>I/P-O/P:3KVAC     I/P-FG:2.0KVAC     O/P-FG:0.5KVAC<br>I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃<br>**SAFETY &**<br>**EMC**<br>**(Note 4)**<br>**EMC IMMUNITY**<br>**EMC EMISSION**<br>**WORKING TEMP.**<br>**WORKING HUMIDITY**<br>**STORAGE TEMP., HUMIDITY**<br>**TEMP. COEFFICIENT**<br>**VIBRATION**<br>-20 ~ +70<br>(Refer to "Derating Curve")<br>℃<br>20 ~ 90% RH non-condensing<br>-20 ~ +85<br>, 10 ~ 95% RH<br>℃<br>±<br>℃<br>℃<br>0.03%/<br>(0~45<br>) on CH1 output<br>10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes<br>**ENVIRONMENT**<br>**RATED CURRENT**<br>**CURRENT RANGE**<br>**RATED POWER**<br>**VOLTAGE RANGE**<br>**FREQUENCY RANGE**<br>**EFFICIENCY (Typ.)**<br>**INPUT**<br>**ALARM**<br>**INRUSH CURRENT (Typ.)**<br>**LEAKAGE CURRENT**<br>**AC OK**<br>**Note.5**<br>**BATTERY LOW**<br>**AC CURRENT (Typ.)**<br>90 ~ 264VAC            127 ~ 370VDC<br>47 ~ 63Hz<br>88%<br>2.5A/115VAC           1.5A/230VAC<br>COLD START 35A/115VAC          70A/230VAC<br><1mA / 240VAC<br>**FUNCTION**<br>Battery low voltage : < 11V<br>Battery low voltage : < 22V<br>Relay contact output, ON : AC OK ; OFF : AC Fail ; Max. rating : 30V / 1A<br>Relay contact output, OFF : Battery OK ; ON : Battery Low ; Max. rating : 30V / 1A<br>3.8A<br>0 ~ 5.8A<br>160W<br>4A<br>--------<br>7.6A<br>0 ~ 11.6A<br>160W<br>**POWER FACTOR (Typ.)**<br>PF<br>0.95/230VAC          PF<br>0.98/115VAC at full load<br>≧<br>≧<br>90%<br>**MODEL**<br>**PSC-160B**<br>**PSC-160A**<br>**DC VOLTAGE**<br>27.6V<br>CH1<br>13.8V<br>CH2<br>13.8V<br>CH1<br>**OUTPUT NUMBER**<br>**VOLTAGE ADJ. RANGE**<br>**LINE REGULATION**<br>**LOAD REGULATION**<br>**SETUP, RISE TIME**<br>**Note.4**<br>**HOLD UP TIME (Typ.)**<br>2000ms, 30ms/230VAC          2000ms, 30ms/115VAC at full load<br>40ms/230VAC          40ms/115VAC at full load<br>240mVp-p<br>CH1: 24 ~ 29V<br>±1.0%<br>±0.5%<br>±0.5%<br>--------<br>--------<br>--------<br>--------<br>150mVp-p<br>CH1: 12 ~ 15V<br>±1.0%<br>±0.5%<br>±0.5%<br>**RIPPLE & NOISE (max.) Note.2**<br>**VOLTAGE TOLERANCE Note.3**<br>**OVERLOAD**<br>**OVER VOLTAGE**<br>**BATTERY CUT OFF**<br>CH1:28.98 ~ 37.26V<br>20 1V<br>±<br>105 ~ 150% rated output power<br>CH1:14.49 ~ 18.63V<br>Protection type : Hiccup mode, recovers automatically after fault condition is removed<br>Protection type : Shut down o/p voltage, re-power on to recover<br>10 0.5V<br>±<br>**PROTECTION**<br>**NOTE**<br>℃<br>、<br>℃<br>℃<br>2A<br>--------<br>27.6V<br>CH2<br>--------<br>--------<br>--------<br>--------<br>1. All parameters NOT specially mentioned are measured at230VAC input, rated load and 25 _ofambient temperature.<br>2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.<br>3. Tolerance: includes set up tolerance, line regulation and load regulation.<br>4. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.<br>5. Please refer to suggested Application 2.(2)<br>(3) in page 3.<br>6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it<br>still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”<br>(as available on http:/Avww.meanwell.com)<br>7. The ambient temperature derating of 3.5<br>/1000m with fanless models and of<br>5<br>/1000m with fan models for operating altitude higher than<br>2000m(6500?t).||**PSC-160A**||**PSC-160B**||
||**OUTPUT NUMBER**|CH1|CH2|CH1|CH2|
||**DC VOLTAGE**|13.8V|13.8V|27.6V|27.6V|
||**RATED CURRENT**|7.6A|4A|3.8A|2A|
||**CURRENT RANGE**|0 ~ 11.6A|--------|0 ~ 5.8A|--------|
||**RATED POWER**|160W||160W||
||**RIPPLE & NOISE (max.) Note.2**|150mVp-p|--------|240mVp-p|--------|
||**VOLTAGE ADJ. RANGE**|CH1: 12 ~ 15V||CH1: 24 ~ 29V||
||**VOLTAGE TOLERANCE Note.3**|±1.0%|--------|±1.0%|--------|
||**LINE REGULATION**|±0.5%|--------|±0.5%|--------|
||**LOAD REGULATION**|±0.5%|--------|±0.5%|--------|
||**SETUP, RISE TIME**<br>**Note.4**|2000ms, 30ms/230VAC          2000ms, 30ms/115VAC at full load||||
||**HOLD UP TIME (Typ.)**|40ms/230VAC          40ms/115VAC at full load||||
||**VOLTAGE RANGE**|90 ~ 264VAC            127 ~ 370VDC||||
||**FREQUENCY RANGE**|47 ~ 63Hz||||
||**POWER FACTOR (Typ.)**|PF<br>0.95/230VAC          PF<br>0.98/115VAC at full load<br>≧<br>≧||||
||**EFFICIENCY (Typ.)**|88%||90%||
||**AC CURRENT (Typ.)**|2.5A/115VAC           1.5A/230VAC||||
||**INRUSH CURRENT (Typ.)**|COLD START 35A/115VAC          70A/230VAC||||
||**LEAKAGE CURRENT**|<1mA / 240VAC||||
||**OVERLOAD**|105 ~ 150% rated output power<br>Protection type : Hiccup mode, recovers automatically after fault condition is removed||||
||**OVER VOLTAGE**|CH1:28.98 ~ 37.26V<br>CH1:14.49 ~ 18.63V<br>Protection type : Shut down o/p voltage, re-power on to recover||||
||**BATTERY CUT OFF**|10 0.5V<br>±||20 1V<br>±||
||**AC OK**<br>**Note.5**|Relay contact output, ON : AC OK ; OFF : AC Fail ; Max. rating : 30V / 1A||||
||**BATTERY LOW**|Battery low voltage : < 11V<br>Battery low voltage : < 22V<br>Relay contact output, OFF : Battery OK ; ON : Battery Low ; Max. rating : 30V / 1A||||
||**WORKING TEMP.**|-20 ~ +70<br>(Refer to "Derating Curve")<br>℃||||
||**WORKING HUMIDITY**|20 ~ 90% RH non-condensing||||
||**STORAGE TEMP., HUMIDITY**|-20 ~ +85<br>, 10 ~ 95% RH<br>℃||||
||**TEMP. COEFFICIENT**|±<br>℃<br>℃<br>0.03%/<br>(0~45<br>) on CH1 output||||
||**VIBRATION**|10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes||||
||**SAFETY STANDARDS**|UL60950-1, TUV EN60950-1<br>approved<br>,EAC TP TC 004||||
||**WITHSTAND VOLTAGE**|I/P-O/P:3KVAC     I/P-FG:2.0KVAC     O/P-FG:0.5KVAC||||
||**ISOLATION RESISTANCE**|I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃||||
||**EMC EMISSION**|Compliance to EN55032 (CISPR32) Class B, EN61000-3-2,-3, EAC TP TC 020||||
||**EMC IMMUNITY**|Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level,  criteria A, EAC TP TC 020||||
||**MTBF**|257K hrs min.      MIL-HDBK-217F (25<br>)<br>℃||||
||**DIMENSION**|PCB:152.4*76.2*32mm (L*W*H) ; Enclosed type:155.4*85*37mm (L*W*H)||||
||**PACKING**|PCB:0.35Kg;42pcs/15.7Kg/1.22CUFT ; Enclosed type: 0.45Kg;32pcs/15.4Kg/0.94CUFT||||
||℃<br>、<br>℃<br>℃<br>1. All parameters NOT specially mentioned are measured at230VAC input, rated load and 25 _ofambient temperature.<br>2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.<br>3. Tolerance: includes set up tolerance, line regulation and load regulation.<br>4. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.<br>5. Please refer to suggested Application 2.(2)<br>(3) in page 3.<br>6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it<br>still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”<br>(as available on http:/Avww.meanwell.com)<br>7. The ambient temperature derating of 3.5<br>/1000m with fanless models and of<br>5<br>/1000m with fan models for operating altitude higher than<br>2000m(6500?t).|||||



_File Name:PSC-160-SPEC   2018-01-12_ 

## 160W Single Output with Battery Charger(UPS Function) **PSC - 160 series** 

## **Mechanical Specification** 

**==> picture [501 x 627] intentionally omitted <==**

**----- Start of picture text -----**<br>
Unit:mm<br>Cover:<br>No.231A-T<br>CN2<br>1 1<br>2 2<br>3 3<br>4<br>CN1 5<br>6<br>FS1 [|| oo HS1 > 78 SECSecc aaalOe<br>1<br>2<br>3 CN3<br>AN 4SVR1 AanmL | CJ a F<br>Ny HS3 LS =) a<br>5.6 141.2<br>152.4<br>. ‘ —- Wage<br>BP @] =<br>| i) Shey oJ<br>tL [LT— aty . - 1955 ~ 275, we.<br>L-Bracket:<br>No.231A-D<br>AN<br>1.HS1,HS3 can not be shorted.<br>2.HS1,HS3 must have safety isolation distance with system case.<br>=e  :Grounding required<br>AC Input Connector (CN1) : JST B3P-VH or equivalent<br>Pin No. Assignment Mating Housing Terminal<br>1 AC/N Alarm Output Connector(CN3) : JST B4B-XH or equivalent<br>2 No Pin JST VHR JST SVH-21T-P1.1 Pin No. Assignment Mating Housing Terminal<br>or equivalent or equivalent<br>3 AC/L 1 2<br>AC OK<br>= la| JST XHP JST SXH-001T-P0.6<br>DC Output Connector (CN2) : JST B8P-VH or equivalent 3 4 Bat. Low | or equivalent or equivalent<br>Pin No. Assignment Mating Housing Terminal a<br>1,2 -V AN<br>3,4 +V JST VHR JST SVH-21T-P1.1<br>1.-V and Bat- can not be shorted.<br>5,6 Bat+ or equivalent or equivalent<br>7,8 Bat-<br>| Block Diagram<br>RL1 AC OK<br>ALARM | 0<br>CIRCUIT O<br>: 3 0)<br>RL2 Bat. Low<br>3 1<br>O<br>EMI FILTER PFC POWER RECTIFIERS © ) +V<br>I/P RECTIFIER& CIRCUIT SWITCHING & -V<br>FILTER<br>| ge Bat. +<br>DETECTION Bat. -<br>FG CIRCUIT<br>PWM<br>O.L.P. CONTROL Battery Charger<br>— | — &<br>a O.V.P. Back up Control<br>4-<br>ψ<br>3.8<br>3max.<br>5.6<br>76.2 64.75<br>32max.<br>AC FUSE T 4.0A/250V<br>**----- End of picture text -----**<br>


_File Name:PSC-160-SPEC   2018-01-12_ 

## 160W Single Output with Battery Charger(UPS Function) **PSC - 160 series** 

## **Output Derating** 

**==> picture [152 x 13] intentionally omitted <==**

**----- Start of picture text -----**<br>
Output Derating VS Input Voltage<br>**----- End of picture text -----**<br>


**==> picture [452 x 147] intentionally omitted <==**

**----- Start of picture text -----**<br>
100<br>100 PCB only<br>90<br>80<br>80<br>Enclosed type<br>60 70<br>50<br>60<br>40<br>50<br>20<br>40<br>-20 0 10 20 30 40 45 50 60 70 (HORIZONTAL) 90 95 100 115 120 140 160 180 200 220 240 264<br>AMBIENT TEMPERATURE ( ℃ ) INPUT VOLTAGE (VAC) 60Hz<br>LOAD (%) LOAD (%)<br>**----- End of picture text -----**<br>


## **Suggested Application** 

## **1.Backup connection for AC interruption** 

- (1) Please refer to the Fig1.1 for suggested connection. 

The power supply charges the battery and provides energy to the load at the same time when the AC main is OK. 

The battery starts to supply power to the load when the AC mains fails. 

**==> picture [319 x 118] intentionally omitted <==**

**----- Start of picture text -----**<br>
CN2<br>1 -V<br>1 2 -<br>23 34 +V + Load<br>CN1 5 Bat+<br>6 + A : 12V<br>HS1 78 Bat- - B : 24V<br>FS1<br>1 Battery<br>2<br>3 CN3<br>4<br>SVR1<br>HS3<br>AC FUSET 4.0A/250V<br>**----- End of picture text -----**<br>


Fig 1.1 Suggested system connection 

## **2.Alarm signal for AC OK and Battery Low** 

- (1) Alarm signal is sent out through " AC OK " & " Battery Low " pins.(relay contact type) 

- (2) An external voltage source is required for this function. The maximum applied voltage is 30V and the maximum sink current is 1A. 

- (3) Table2.1 explains the alarm function built in the power supply 

|Function|Output of Alarm<br>Description|AC OK|(Battery low)|||
|---|---|---|---|---|---|
||Low or short<br>The signal is "Low" when the power supply<br>turns on|CN3 Pin1(Pin3)||||
|AC OK||||||
|Battery<br>Low|voltage 30V max.)<br>voltage 30V max.)<br>Low or short<br>High or open(External applied<br>High or open(External applied<br>The signal is "Low" when the voltage of<br>The signal is "High" when the voltage of<br>The signal turns to be "High" when the power<br>battery is under A:11V, B:22V<br>battery is above A:11V, B:22V<br>supply turns OFF||||R<br>V|
|||CN3 Pin2(Pin4)|||External voltage source (V)|
||Table 2.1 Explanation of Alarm Signal||||and resistor (R)|
||||||(The max. Sink is 1A and 30V)|



- (4) RL1 (AC OK)signal will go into hiccup mode when the overload protection is activating. 

**==> picture [126 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
Fig 2.2 Internal circuit of AC OK (Battery Low)<br>**----- End of picture text -----**<br>


_File Name:PSC-160-SPEC   2018-01-12_