PMS9505.180NLT

## SMT Current Sense Transformer 

_PH9505.XXXNL and PMS9505.XXXNL EP10 SMD Platform_ 

- _**Insulation:** Reinforced, 6.5mm creepage_ _**Isolation:** 3000Vrms_ 

- _**Height:** 14.4mm Max_ 

- _**Footprint:** 13.6mm x 12.8mm Max_ _**Current Rating:** up to 30A_ 

_**Operating Frequency:** Greater than 20kHz_ 

## **Electrical Specifications @ 25°C — Operating Temperature -40°C to +125°C** 

|**Electrical Specifications @ 25°C — Operating Temperature -40°C to +125°C**|**Electrical Specifications @ 25°C — Operating Temperature -40°C to +125°C**|**Electrical Specifications @ 25°C — Operating Temperature -40°C to +125°C**|**Electrical Specifications @ 25°C — Operating Temperature -40°C to +125°C**|**Electrical Specifications @ 25°C — Operating Temperature -40°C to +125°C**|**Electrical Specifications @ 25°C — Operating Temperature -40°C to +125°C**|**Electrical Specifications @ 25°C — Operating Temperature -40°C to +125°C**|**Electrical Specifications @ 25°C — Operating Temperature -40°C to +125°C**|
|---|---|---|---|---|---|---|---|
|**Commercial5,6**|**Automotive**|**Automotive**<br>**Turns**<br>**Ratio**<br>**±2.0%**|**Current2**<br>**Rating**<br>**(A)**|**Secondary**<br>**Inductance**<br>**(mH Min)**|**DCR(m**Ω**Max)**<br>**Primary**<br>**(1*-2)**<br>**Secondary**<br>**(5*-4)**||**Hipot**<br>**(VAC)**|
||||||**Primary**<br>**(1*-2)**|||
|**PH9505.050NLT**|PMS9505.050NLT|PMS9505.050NLT<br>1:50|30|1.7|0.5|1500|3000|
|**PH9505.070NLT**|PMS9505.070NLT|PMS9505.070NLT<br>1:70|30|3.0|0.5|2100|3000|
|**PH9505.100NLT**|PMS9505.100NLT|PMS9505.100NLT<br>1:100|30|7.0|0.5|3100|3000|
|**PH9505.125NLT**|PMS9505.125NLT|PMS9505.125NLT<br>1:125|30|11|0.5|4000|3000|
|**PH9505.180NLT**|PMS9505.180NLT|PMS9505.180NLT<br>1:180|30|25|0.5|9000|3000|



## **NOTES:** 

1. The temperature of component (ambient temperature plus temper-ature rise) must be within the specified operating temperature range. 

2. The maximum current rating is based upon temperature rise of the component and represents the DC current which will cause a typical temperature rise of 40°C . 

3. To calculate value of terminating resistor (Rt) use the following formula: 

- Rt (W) = Vref * N / (Ipeak_primary) 

4. The peak flux density of the device must remain below 2200 Gauss. To calculate the peak flux density for uni-polar current use following formula: 

- Bpk = 8.85* Vref * (Duty_Cycle_Max) * 10[5] / (N * Freq_kHz) 

- for bi-polar current applications divide Bpk (as calculated above) by 2. 

working voltage up to 500Vrms and with reinforced insulation according to IEC60664/IEC60950-1 for working voltage up to 300Vrms 

Application condition: OVC II, Pollution degree 2, Material Group 3, Altitude up to 2km. The actual creepage distance > 6.5mm and the clearance distance >4.5mm between primary and secondary windings. This creepage distance is reduced when the transformer is mounted on the proposed pad layout. Refer to the PCB material group and pollution degree to determine if this reduces the working voltage capability. 

   6. Optional Tape & Reel packaging can be ordered by adding a “ **T** ” suffix to the part number (i.e. PH9505.100NL becomes PH9505.100NLT). Pulse complies to industry standard tape and reel specification EIA481. 

   7. The “ **NL** ” suffix indicates an RoHS-compliant part number. 

5. This design complies with basic insulation according to EC60664/ IEC60590-1/IEC61558-1/-2-16 for a 

## **Mechanical** 

## **Schematic** 

## [ **PH9505NLT/PMS9505NLT** 

**==> picture [140 x 212] intentionally omitted <==**

**----- Start of picture text -----**<br>
q| g:5 q<br>s<br>8) 8<br>yie<br>6 rr ee 1<br>I 1 1 0.2.5 MAXwax —|<br>eeatatstatatehctatetctetatellRRR)sesceceanrareeseeeseeenettsesteceennnrerseseseeeeettsesceearnreceeoeseeenettsesceceannnreeeeoeseeeeettsistetetatatesteeseetROXEERRKKeccmeeneenee KES<br>a——L_]<br>y |<br>eel 1<br>1.85 Ret in 6 5 rerRe LET 385 Ret SURFACE[Sfo.13]<br>13.0£0.5 ——]<br>41 i 1<br>2.50+0.25~_§ 4coeaaLBSSRR| | OLI6,440.37 3x|Oo25 =<br>=|Pos aralLer| a1,440.1=al— 4x<br>PulseElectronics.com<br>1<br>Part Number<br>**----- End of picture text -----**<br>


**Application circuit and pinning** Weight  . . . . . . . . . . . . . . 4 .3 grams Tape & Reel  . . . . . . . . . . . 150/reel 

Dimensions:[Inches] mm ~~_~~ Unless otherwise specified, all tolerances are ±[  .010 ] ~~—~~ 0,25 

P828.F (10/22) 

## SMT Current Sense Transformer 

_PH9505.XXXNL and PMS9505.XXXNL EP10 SMD Platform_ 

**==> picture [77 x 37] intentionally omitted <==**

## For More Information: 

**Americas -** prodinfo_power_americas@ yageo.com  | **Europe -** prodinfo_power_emea@yageo.com  | **Asia -** prodinfo_power_asia@yageo.com 

Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2022. Pulse Electronics, Inc. All rights reserved. 

**==> picture [76 x 37] intentionally omitted <==**

P828.F (10/22) 

PulseElectronics.com 

2