PMP6RGT

## **Photoelectrics Retro-reflective, Polarized, Relay Output Type PMP** 

- **Range: 6 m** 

- **Modulated, visible light, polarized** 

- **Make or break switching function (switch selectable)** 

- **LED-indication for target detected** 

- **Multi supply voltage:** 

- **12 to 240 VDC and** 

- **24 to 240 VAC, 50/60 Hz** 

- **25 x 65 x 81 mm reinforced PC/ABS- housing, IP 67** 

- **Timer options (adjustable)** 

- **NO and NC output** 

**Product De scri tion Orderin Ke p g y PMP 6 R G T** Retro-reflective pho to e lec tric tion. 25 x 65 x 81 mm pla stic **Type** switch with polarized light. hous ing. PG 13.5 or 1/2” NPT **Range** Range up to 6 m. Fixed sen sicable gland. Timer options: **Output** tiv i ty. Im mune to am bi ent light. Delay on operate, delay on **Cable gland type** ~~a"~~ Output func tion switch selecre lease, one shot (trig gered **Timer function** table. Pro tec tion de gree IP on leading or trail ing edge). 67. Screw ter mi nal con nec- 

## **T e Selection yp** 

|**Type Selection**||
|---|---|
|**Housing**|**Range**|
|**W x H x D**|**(Sn) **|
|25 x 65 x 81||
|PG 13.5 cable gland|6 m|
|1/2” NPT cable gland|6 m|



**Ordering no. with timer** 

**PMP 6R GT PMP 6R IT** 

## **S ecifications p** 

|**Rated operating dist.**(Sn)|**Rated operating dist.**(Sn)|PMP6.. 6 m|
|---|---|---|
|(0 to 5,000 lux)||with reflector type ER 4,<br>ref. target|
|**Blind zone**||≤ 0.15 m|
|**Rated operational volt.**|**Rated operational volt.**(UB)|10.8 to 264 VDC|
|AC: 45 to 65 Hz||21.6 to 264 VAC|
|**Rated operational power**|||
|(relayON)||≤ 2 W(2.5 VA)|
|**Output**|||
|Contact ratings (AgCdO)||µ (micro gap)|
|Resistive loads|AC 1|3 A/250 VAC|
||DC 1|3 A/30 VDC|
|Small inductive loads AC 15|Small inductive loads AC 15|2 A/250 VAC|
|DC 13<br>Mechanical life (typical)<br>Electrical life (typical)||3 A/30 VDC<br>≥ 40 x 106operations<br>≥ 5 x 105operations<br>at 220 VAC - 3 A resistive<br>load: 360 impulses/h|
|**Dielectric voltage**||2,000 VAC (rms)|
|||(cont./supply)|
|**Sensitivity**||Fixed|
|**Light source**||GaAlAs, LED, 660 nm|
|**Light type**||Visible, modulated|
|**Optical angle**||±2°|
|**Light spot size**||280 mm at 4 m|



|**Operating frequency**|20 Hz|
|---|---|
|**Response time**||
|OFF-ON (tON)|≤ 20 ms|
|ON-OFF(tOFF)|≤ 30 ms|
|**Power ON delay **(tv)|≤ 300 ms(typ. 100 ms)|
|**Output function**|Switch selectable, make or|
||break switching|
|**Indication**||
|Target detected|LED, yellow|
|**Optional timer**||
|Delay on operate|0.1 to 7 s ± 2 s|
|Delay on release|0.1 to 7 s ± 2 s|
|One shot|0.1 to 7 s ± 2 s|
|**Environment**||
|Overvoltage category|III (IEC 60664/60664A;|
||60947-1)|
|Pollution degree|3 (IEC 60664/60664A;|
||60947-1)|
|Degree ofprotection|IP 67(IEC 60529;60947-1)|
|**Temperature**||
|Operating|-25° to +55°C (-13° to +131°F)|
|Stor age|-30° to +80°C (-22° to +176°F)|



**1** 

Specifications are subject to change without notice (22.01.2015) 

**PMP** 

## **Specifications (cont.)** 

|**Vibration**|10 to 150 Hz, 0.5 mm/7.5 g<br>(IEC 60068-2-6)|
|---|---|
|**Shock**|2 x 1 m & 100 x 0.5 m|
|**Rated insulation voltage**|(IEC 60068-2-32)<br>250 VAC(rms)|
|**Housing material**||
|Body|PC/ABS, grey|
|Front|PMMA, red|
|Cover|PC, black|
|Cable gland|PA, black, reinforced|
|Mountingbracket|Steel,black|
|**Connection**||
|Screw terminal|5 x 2 x 1 mm2|
|Cable gland|PG 13.5 or 1/2” NPT|
||for cable 6 to 10 mm|
|**Weight**|110g|
|**Approvals**|UL,CSA|
|**CE-marking**|Yes|



## **Truth Table** 

||Make switch ing|Make switch ing|Break switching|Break switching|
|---|---|---|---|---|
|Object present|Yes|No|Yes|No|
|LED|OFF|ON|OFF|ON|
|Load|Non-<br>active|Active|Active|Non-<br>active|



## **Connection Dia ram g** 

## **Selection of Function** 

**==> picture [365 x 250] intentionally omitted <==**

**----- Start of picture text -----**<br>
Switch<br>Time adjustment  1   2   3<br>PMP 6R . 1  Delay on operate -<br> Break switching<br>2  Delay on operate -<br> Make switching<br>3  Delay on release -<br>=<br> Break switching<br>LED<br>4  Delay on release -<br>DIP switches  Make switching<br>=<br>5 One shot, trailing edge -<br>12 - 240 VDC   Break switching<br>24 - 240 VAC<br>50/60 Hz == 6  One shot, trailing edge -<br> Make switching<br>7  One shot, leading edge -<br>30 VDC  Break switching<br>250 VAC<br>Max. 3 A 8  One shot, leading edge -<br>= EE=  Make switching<br>Upper postion ON (Mode 1)<br>Lower position OFF (Mode 0)<br>**----- End of picture text -----**<br>


## **Installation Hints** 

_To avoid interference from inductive voltage/ Relief of cable strain Protection of the sensing face Switch mounted on mobile carrier current peaks, separate the prox. switch power cables from any other power cables, e.g. motor, contactor or solenoid cables_ Incorrect Correct The cable should not be pulled A proximity switch should not serve as Any repetitive flexing of the ~~te~~ mechanical stop cable should be avoided 

**2** 

Specifications are subject to change without notice (22.01.2015) 

**PMP** 

**==> picture [72 x 72] intentionally omitted <==**

## **O eration Dia ram p g** 

t   = Time delay tv = Power ON delay Power supply Target present Object present Func 1. Output ON Func 2. Output ON Func 3. Output ON Func 4. Output ON Func 5. Output ON Func 6. Output ON Func 7. Output ON Func 8. Output ON Func 9. Output ON 

Func 10. Output ON 

## **Dimensions** 

**==> picture [500 x 245] intentionally omitted <==**

**----- Start of picture text -----**<br>
PMP PMP with angle  bracket<br>25 81<br>17.5 40 7<br>61.5<br>2.5<br>35.5<br>67.5 29.5 9.5<br>Ø4.3<br>36<br>5<br>Pg 13.5 or ½” NPT<br>or 1/2” NPT<br>**----- End of picture text -----**<br>


## **Accessories** 

- Reflectors: ER series 

- MB02 (longer mounting bracket) 

## **Deliver Contents y** 

- Photoelectric switch: PMP 

- Cable gland 

- Installation instruction 

- Mounting bracket 

- **Packaging:** Corrugated cardboard (environmentally friendly recycling material) 

**3** 

Specifications are subject to change without notice (22.01.2015)