PMP12RG

## **Photoelectrics Retro-reflective, Polarized, Relay Output Type PMP12..** 

- **Range: 12 m** 

- **Modulated, visible light, polarized** 

- **Make or break switching function (switch selectable)** 

- **LED-indication for target detected** 

- **Multi supply voltage:** 

- **12 to 240 VDC and** 

- **24 to 240 VAC, 50/60 Hz** 

- **25 x 65 x 81 mm reinforced PC/ABS- housing, IP 67** 

- **NO and NC output** 

- **High EMC immunity** 

- **UL, CSA and CE** 

## **Product De scri tion p** 

**Product De scri tion Orderin Ke p g y PMP12RG** The PMP12.. is a powerapplications where dust and **Type family** full polarized retro reflective weather conditions will influ- **Type** sensor. The sensor is designed ence on the sensing distance. **Sensing distance (m)** to meet the hash requirements The sensor is made in a strong **Output relay** ~~ee~~ in industrial environments. glass reinforced PC/ABS **Cable gland type** With a sensing distance at housing with two cable glands 12 m the sensor is usefull in for easy connection. 

## **T e Selection yp** 

|**Type Selection**||
|---|---|
|**Housing**|**Range**|
|**W x H x D**|**(Sn) **|
|25 x 65 x 81||
|PG 13.5 cable gland|12 m|
|1/2” NPT cable gland|12 m|



**Ordering no. without timer** 

**PMP 12 RG PMP 12 RI** 

## **S ecifications p** 

|**Rated operating dist.**(Sn)|**Rated operating dist.**(Sn)|12 m||
|---|---|---|---|
|(0 to 5,000 lux)<br>**Blind zone**<br>**Sensitivity**<br>**Temperature drift**||with reflector type ER 4,<br>ref. target<br>≤ 0.15 m<br>Fixed<br>≤ 0.4 %/°C||
|**Differential travel**(H)||||
|Hysteresis||3 to 20%||
|**Rated operational volt.**|**Rated operational volt.**(UB)|10.8 to 264 VDC<br>21.6 to 264 VAC,45 to 65 Hz|45 to 65 Hz|
|**Rated operational power**||||
|(relayON)||≤ 2 W(2.5 VA)||
|**Output**||||
|Contact ratings (AgCdO)||µ (micro gap)||
|Resistive loads|AC 1|3 A/250 VAC||
||DC 1|3 A/30 VDC||
|Small inductive loads AC 15|Small inductive loads AC 15|2 A/250 VAC||
|DC 13||3 A/30 VDC||
|Mechanical life (typical)<br>Electrical life (typical)<br>**Dielectric voltage**|Mechanical life (typical)|≥ 40 x 106operations<br>≥ 5 x 105operations<br>at 220 VAC - 3 A resistive<br>load: 360 impulses/h<br>2,000 VAC (rms)<br>(cont./supply)|at 220 VAC - 3 A resistive|
|**Light source**||GaAlAs,LED,660 nm||
|**Light type**||Visible, modulated||



|**Optical angle**|± 1.5°|
|---|---|
|**Light spot size**|280 mm at 4 m|
|**Ambient light**|Max. 5’000 lux|
|**Operating frequency**|20 Hz|
|**Response time**||
|OFF-ON (tON)|≤ 20 ms|
|ON-OFF(tOFF)|≤ 30 ms|
|**Power ON delay **(tv)|≤ 300 ms(typ. 100 ms)|
|**Output function**|Switch selectable, make or|
||break switching|
|**Indication**||
|Target detected|LED, yellow|
|**Environment**||
|Overvoltage category|III (IEC 60664/60664A;|
||60947-1)|
|Pollution degree|3 (IEC 60664/60664A;|
||60947-1)|
|Degree ofprotection|IP 67(IEC 60529;60947-1)|
|**Temperature**||
|Operating|-25° to +55°C (-13° to +131°F)|
|Stor age|-30° to +80°C(-22° to +176°F)|
|**Vibration**|10 to 150 Hz, 0.5 mm/7.5 g|
||(IEC 60068-2-6)|
|**Shock**|2 x 1 m & 100 x 0.5 m|
||(IEC 60068-2-32)|
|**Rated insulation voltage**|250 VAC (rms)|



**1** 

Specifications are subject to change without notice (19.01.2015) 

**PMP12** 

## **Specifications (cont.)** 

**Housing material** Body PC/ABS, grey Front PMMA, red Cover PC, black Cable gland PA, black, reinforced Mounting  bracket Steel, galvanized **Connection** Screw terminal 5 x 2 x 1 mm[2 ] Cable gland PG 13.5 or 1/2” NPT for cable 6 to 10 mm **Weight** 110 g **Approvals** UL, CSA **CE-marking** Yes 

**==> picture [72 x 72] intentionally omitted <==**

## **Connection Dia ram g** 

**==> picture [245 x 190] intentionally omitted <==**

**----- Start of picture text -----**<br>
LED<br>Break *<br>ON DIP switches Make<br>12 - 240 VDC<br>24 - 240 VAC<br>50/60 Hz<br>30 VDC<br>250 VAC<br>Max. 3 A<br>* Upper position ON (mode 1)<br>Lower position OFF (mode 0)<br>**----- End of picture text -----**<br>


## **O eration Dia ram p g** 

t   = Time delay tv = Power ON delay 

Power supply Target present Object present 

**==> picture [387 x 41] intentionally omitted <==**

## **Dimensions** 

**==> picture [500 x 258] intentionally omitted <==**

**----- Start of picture text -----**<br>
PMP PMP with angle  bracket<br>25 81<br>17.5 40 7<br>61.5<br>2.5<br>35.5<br>67.5 29.5 14.5<br>Ø4.3<br>36<br>5<br>Pg 13.5 or ½” NPT<br>**----- End of picture text -----**<br>


**2** 

Specifications are subject to change without notice (19.01.2015) 

**PMP12** 

## **Installation Hints** 

**==> picture [436 x 107] intentionally omitted <==**

**----- Start of picture text -----**<br>
To avoid interference from inductive voltage/  Relief of cable strain Protection of the sensing face  Switch mounted on mobile carrier<br>current peaks, separate the prox. switch<br>power cables from any other power cables,<br>e.g. motor, contactor or solenoid cables<br>Incorrect<br>Correct<br>The cable should not be pulled A proximity switch should not serve as  Any repetitive flexing of the<br>mechanical stop cable should be avoided<br>**----- End of picture text -----**<br>


## **Deliver Contents y** 

- Photoelectric switch: PMP12.. 

- Cable gland 

## **Accessories** 

   - Reflectors: ER series 

   - MB02 (longer mounting bracket) 

- Installation instruction 

- Mounting bracket 

- **Packaging:** Cardboard box 

**3** 

Specifications are subject to change without notice (19.01.2015)