PM-0112-070-0.

Single-phase, primary switched mode power supply **PM-0112-070-0** 

~~DT~~ 

## Advantages 

Stabilized and adjustable output voltage Low stand-by consumption <1 W Constant current limiting without overload shutdown DC OK indicator Push-in terminals Robust DIN rail mounting In compliance with EN 60335-1 3 years warranty 

## Applications 

Efficient, primary switched mode power supply in slim plastic housing. A powerful and flexible option that's still light and compact. Our real all-rounders, these power supply units are suitable for a highly diverse range of applications in solar, measurement and control technology as well as industrial and building automation. The devices cover the lower and average power requirements from 25 W to 100 W. Versions with 12 V, 24 V, 30.5 V and 48 V are available, enabling a whole range of applications. A version with 3.8 A rated current is available for establishing NEC Class 2 circuits. All power supplies also comply with the EN 60335-1 standard for domestic appliances. The output voltage can be easily set using the rotary potentiometer on the front of the housing. The DIN rail fastening method and push-in connection terminals enable fast and secure mounting. 

Versions for construction of AS-i circuits as well as for medical applications according to UL 60601 are available. 

**==> picture [102 x 6] intentionally omitted <==**

**----- Start of picture text -----**<br>
Picture shows PM-0124-040-0<br>**----- End of picture text -----**<br>


## Standards Z 

## Approvals # W o Z 

Primary switched mode power supply to UL 60950, UL 508 

UL/CSA 60950 recognised, UL508 listed, Germanischer Lloyd 

Safety: EN 61558-2-16, EN 60950-1, EN 60335-1 EMC: EN 61204-3 

## Single-phase, primary switched mode power supply **PM-0112-070-0** 

|||Type|PM-0112-070-0|
|---|---|---|---|
|+-||Special features<br>Characteristics|-|
|o <br>b<br>oO<br>xe)<br>=|Input<br>Input rated voltage<br>Input voltage range<br>Input voltage derating<br> ~~| ——~~||100 - 240 Vac<br>85 - 264 Vac (120 - 372 Vdc)<br>-2,5 %/Vac < 95 Vac|
|9||Rated frequency range|44 Hz - 66 Hz / 0 Hz|
|oO<br>wo||Input rated current (rated load)<br>Starting current limiter<br>Switch-on time|1.87 A (100 Vac) / 0.94 A (240 Vac)<br>< 30 A, NTC<br>0.5 s (100 Vac) / 0.3 s (230 Vac)|
|||Power factor<br>Input fuse internal|0.55<br>4 A|
|||Recommended back-up fuse (circuit breaker)<br>Mains buffering (rated load)<br>Transient surge voltage protection<br>Output|6 A, 10 A, 16 A,<br>characteristic B, C<br>15 ms (100 Vac) / 80 ms (230 Vac)<br>varistor|
|||Output rated voltage<br>Output voltage range<br>Output rated current<br>Output limited current|12 Vdc<br>11,5 – 14,5 Vdc<br>7 A<br>7.7 ... 8 A (constant current)|
|||Class 2 output (UL Limited Power Source, LPS)|No|
|||Parallel connection|Yes|
|||Serial operation|Yes|
|||Power dissipation, no load/rated load|<1 W / 16.2 W (230 Vac)|
|||Max. power losses|19.8 W (100 Vac / 12 V / 7 A)|
|||Ripple factor|typ. 20mVss|
|||Resistance to reverse feed max.|25 Vdc|
|||Over-voltage-protection|max. 32 Vdc|
|||Efficiency|86 %|
|||Signaling||
||||LED green|
|||Status indicator|Uout > typ. 10 Vdc|
||||LED lit permanently|
||||Active high signal|
|||Signal output|Uout > typ. 10 Vdc<br>max. 40 mA@12 Vdc|
||||short circuit proof|
|||Approvals||
|||Approvals|cURus, cULus, GL|
|||Environment||
|||Storage temperature|-13 °F to +185 °F|
|||Ambient temperature|-13 °F to +158 °F|
|||Derating|-3 %/K > +122 °F|
|||Mounting position|horizontal for standard rail DIN TS35|
|||Type of cooling|Natural convection|
|||Required minimum spacing (left/right)|0.00 inch|
|||Required minimum spacing (over/under)|1.97 inch|
|||Safetyandprotection||
|||Protection index|IP 20|
|||Safety class|II, without PE connection|
|||Order numbers||
|||**Order Number**|**PM-0112-070-0**|



**==> picture [256 x 217] intentionally omitted <==**

**----- Start of picture text -----**<br>
Type PM-0112-070-0<br>Terminal and mounting<br>Terminals input (direct plug-in technology Push-in) max 2,5 mm²<br>Terminals output (direct plug-in technology Push-in) max 2,5 mm²<br>boO Terminals signalling (direct plug-in technology Push- max 2,5 mm²<br>oO in)<br>xe)<br>G Measures and wei ————SSSSSSSSS_______—8QqR ghts<br>2 Weight 0.88 lbs<br>Dimensions in inch<br>5oOo<br>=<br>0.14<br>_ ——— EQD QLe_<br>3.54 1 tsi ESS |<br>s o n] = SS Ss<br>I # 0 I)  | Se .<br>= is p ~<br>0.12 1.77 ———Be i ; r 6| aT ale Go<br>2.05 | ad 4.07<br>4.37<br>30<br>**----- End of picture text -----**<br>