PHPT60415PYX

## **PHPT60415PY** 

**40 V, 15 A PNP high power bipolar transistor 27 May 2015** 

**Product data sheet** 

## **1. General description** 

PNP high power bipolar transistor in a SOT669 (LFPAK56) Surface-Mounted Device (SMD) power plastic package. 

NPN complement: PHPT60415NY 

## **2. Features and benefits** 

- High thermal power dissipation capability 

- High temperature applications up to 175 °C 

- Reduced Printed Circuit Board (PCB) requirements comparing to transistors in DPAK 

- High energy efficiency due to less heat generation 

- AEC-Q101 qualified. 

## **3. Applications** 

- Power management 

- Load switch 

- Linear mode voltage regulator 

- Backlighting applications 

- Motor drive 

- Relay replacement 

## **4. Quick reference data** 

|**Symbol**|**Parameter**|**Conditions**||**Min**|**Typ**|**Max**|**Unit**|
|---|---|---|---|---|---|---|---|
|VCEO|collector-emitter<br>voltage|open base||-|-|-40|V|
|IC|collector current|||-|-|-15|A|
|ICM|peak collector current|single pulse; tp≤ 1 ms||-|-|-30|A|
|RCEsat|collector-emitter<br>saturation resistance|IC= -15 A; IB= -1.5 A; pulsed;<br>tp≤ 300 µs; δ ≤ 0.02  ; Tamb= 25 °C||-|25|57|mΩ|



**Nexperia** 

**PHPT60415PY** 

**40 V, 15 A PNP high power bipolar transistor** 

## **5. Pinning information** 

## **Table 2. Pinning information** 

|**Pin**|**Symbol**|**Description**|**Simplified outline**|**Graphic symbol**|
|---|---|---|---|---|
|1|E|emitter|mb<br>1<br>2<br>3<br>4<br>**LFPAK56; Power-**<br>**SO8 (SOT669)**|_sym132_<br>E<br>C<br>B|
|2|E|emitter|||
|3|E|emitter|||
|4|B|base|||
|mb|C|collector|||



## **6. Ordering information** 

## **Table 3. Ordering information** 

|**Type number**|**Package**|||
|---|---|---|---|
||**Name**|**Description**|**Version**|
|PHPT60415PY|LFPAK56;<br>Power-SO8|Plastic single-ended surface-mounted package (LFPAK56;<br>Power-SO8); 4 leads|SOT669|



## **7. Marking** 

**Table 4. Marking codes** 

|**Type number**|**Marking code**|
|---|---|
|PHPT60415PY|0415PAB|



All information provided in this document is subject to legal disclaimers. 

PHPT60415PY 

© Nexperia B.V. 2017. All rights reserved 

**Product data sheet** 

**27 May 2015** 

**2 / 17** 

**Nexperia** 

**PHPT60415PY** 

**40 V, 15 A PNP high power bipolar transistor** 

## **8. Limiting values** 

## **Table 5. Limiting values** 

_In accordance with the Absolute Maximum Rating System (IEC 60134)._ 

|**Symbol**|**Parameter**|**Conditions**||**Min**|**Max**|**Unit**|
|---|---|---|---|---|---|---|
|VCBO|collector-base voltage|open emitter||-|-40|V|
|VCEO|collector-emitter voltage|open base||-|-40|V|
|VEBO|emitter-base voltage|open collector||-|-8|V|
|IC|collector current|||-|-15|A|
|ICM|peak collector current|single pulse; tp≤ 1 ms||-|-30|A|
|IB|base current|||-|-1.5|A|
|IBM|peak base current|pulsed; tp≤ 1 ms||-|-3|A|
|Ptot|total power dissipation|Tamb≤ 25 °C|[1]|-|1.5|W|
||||[2]|-|3.7|W|
||||[3]|-|5|W|
||||[4]|-|25|W|
|Tj|junction temperature|||-|175|°C|
|Tamb|ambient temperature|||-55|175|°C|
|Tstg|storage temperature|||-65|175|°C|



[1] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard footprint. 

[2] Device mounted on an FR4 Printed-Circuit Board ( PCB), single-sided copper, tin-plated mounting pad for collector 6 cm[2] . 

[3] Device mounted on an ceramic Printed-Circuit Board (PCB), Al2O3, standard footprint. 

[4] Power dissipation from junction to mounting base. 

All information provided in this document is subject to legal disclaimers. 

PHPT60415PY 

© Nexperia B.V. 2017. All rights reserved 

**Product data sheet** 

**27 May 2015** 

**3 / 17** 

**Nexperia** 

**PHPT60415PY** 

**40 V, 15 A PNP high power bipolar transistor** 

**==> picture [233 x 189] intentionally omitted <==**

**----- Start of picture text -----**<br>
aaa-016569<br>6<br>Ptot (1)<br>(W)<br>4 (2)<br>2<br>(3)<br>0<br>-75 25 125 225<br>Tamb (°C)<br>**----- End of picture text -----**<br>


(1) Ceramic PCB, Al2O3, standard footprint 

(2) FR4 PCB, mounting pad for collector 6 cm[2] (3) FR4 PCB, standard footprint 

**Fig. 1. Power derating curves** 

## **9. Thermal characteristics** 

## **Table 6. Thermal characteristics** 

|**Symbol**|**Parameter**|**Conditions**||**Min**|**Typ**|**Max**|**Unit**|
|---|---|---|---|---|---|---|---|
|Rth(j-a)|thermal resistance<br>from junction to<br>ambient|in free air|[1]|-|-|100|K/W|
||||[2]|-|-|41|K/W|
||||[3]|-|-|30|K/W|
|Rth(j-mb)|thermal resistance<br>from junction to<br>mounting base|||-|-|6|K/W|



[1] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard footprint. 

[2] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and mounting pad for collector 6 cm[2] . 

[3] Device mounted on an ceramic Printed-Circuit Board (PCB), Al2O3, standard footprint. 

All information provided in this document is subject to legal disclaimers. 

PHPT60415PY 

© Nexperia B.V. 2017. All rights reserved 

**Product data sheet** 

**27 May 2015** 

**4 / 17** 

**Nexperia** 

**PHPT60415PY** 

## **40 V, 15 A PNP high power bipolar transistor** 

**==> picture [497 x 458] intentionally omitted <==**

**----- Start of picture text -----**<br>
aaa-016570<br>10 [3]<br>Zth(j-a)<br>(K/W)<br>10 [2] duty cycle = 1<br>0.75<br>0.5<br>0.33<br>0.2<br>10 0.1<br>0.05<br>0.02<br>0.01<br>1<br>0<br>10 [-1]<br>10 [-5] 10 [-4] 10 [-3] 10 [-2] 10 [-1] 1 10 10 [2] 10 [3]<br>tp (ns)<br>FR4 PCB, standard footprint<br>Fig. 2. Transient thermal impedance from junction to ambient as a function of pulse duration; typical values<br>aaa-016571<br>10 [2]<br>Zth(j-a) duty cycle = 1<br>(K/W) 0.75<br>0.5<br>0.33<br>10<br>0.2<br>0.1<br>0.05<br>1 0.02<br>0.01<br>0<br>10 [-1]<br>10 [-5] 10 [-4] 10 [-3] 10 [-2] 10 [-1] 1 10 10 [2] 10 [3]<br>tp (ns)<br>FR4 PCB, mounting pad for collector 6 cm [2]<br>Fig. 3. Transient thermal impedance from junction to ambient as a function of pulse duration; typical values<br>**----- End of picture text -----**<br>


All information provided in this document is subject to legal disclaimers. **27 May 2015** 

PHPT60415PY 

© Nexperia B.V. 2017. All rights reserved 

**Product data sheet** 

**5 / 17** 

**Nexperia** 

**PHPT60415PY** 

**40 V, 15 A PNP high power bipolar transistor** 

## **10. Characteristics** 

|**10. Characteristics**|**10. Characteristics**|||||||
|---|---|---|---|---|---|---|---|
|**Table 7.**<br>**Characteristics**||||||||
|**Symbol**|**Parameter**|**Conditions**||**Min**|**Typ**|**Max**|**Unit**|
|ICBO|collector-base cut-off<br>current|VCB= -32 V; IE= 0 A; Tamb= 25 °C||-|-|-100|nA|
|||VCB= -32 V; IE= 0 A; Tj= 150 °C||-|-|-50|µA|
|ICES|collector-emitter cut-off<br>current|VCE= -32 V; VBE= 0 V; Tamb= 25 °C||-|-|-100|nA|
|IEBO|emitter-base cut-off<br>current|VEB= -8 V; IC= 0 A; Tamb= 25 °C||-|-|-100|nA|
|hFE|DC current gain|VCE= -2 V; IC= -500 mA; Tamb= 25 °C||200|340|-||
|||VCE= -2 V; IC= -1 A; tp≤ 300 µs;<br>δ ≤ 0.02  ; Tamb= 25 °C; pulsed||200|330|-||
|||VCE= -2 V; IC= -10 A; tp≤ 300 µs;<br>δ ≤ 0.02  ; Tamb= 25 °C; pulsed||60|90|-||
|||VCE= -2 V; IC= -15 A; pulsed;<br>tp≤ 300 µs; δ ≤ 0.02  ; Tamb= 25 °C||30|45|-||
|VCEsat|collector-emitter<br>saturation voltage|IC= -1 A; IB= -50 mA; tp≤ 300 µs;<br>δ ≤ 0.02  ; Tamb= 25 °C||-|-35|-65|mV|
|||IC= -10 A; IB= -1 A; pulsed;<br>tp≤ 300 µs; δ ≤ 0.02  ; Tamb= 25 °C||-|-235|-550|mV|
|||IC= -15 A; IB= -1.5 A; pulsed;<br>tp≤ 300 µs; δ ≤ 0.02  ; Tamb= 25 °C||-|-375|-850|mV|
|RCEsat|collector-emitter<br>saturation resistance|||-|25|57|mΩ|
|VBEsat|base-emitter saturation<br>voltage|IC= -1 A; IB= -50 mA; pulsed;<br>tp≤ 300 µs; δ ≤ 0.02  ; Tamb= 25 °C||-|-|-0.95|V|
|||IC= -10 A; IB= -1 A; pulsed;<br>tp≤ 300 µs; δ ≤ 0.02  ; Tamb= 25 °C||-|-|-1.3|V|
|||IC= -15 A; IB= -1.5 A; pulsed;<br>tp≤ 300 µs; δ ≤ 0.02  ; Tamb= 25 °C||-|-|-1.4|V|
|VBEon|base-emitter turn-on<br>voltage|VCE= -2 V; IC= -500 mA; Tamb= 25 °C||-|-|-0.8|V|
|td|delay time|VCC= -12.5 V; IC= -8 A;<br>IBon= -250 mA; IBoff= 250 mA;<br>Tamb= 25 °C||-|20|-|ns|
|tr|rise time|||-|190|-|ns|
|ton|turn-on time|||-|210|-|ns|
|ts|storage time|||-|155|-|ns|
|tf|fall time|||-|80|-|ns|
|toff|turn-off time|||-|235|-|ns|



All information provided in this document is subject to legal disclaimers. 

PHPT60415PY 

© Nexperia B.V. 2017. All rights reserved 

**Product data sheet** 

**27 May 2015** 

**6 / 17** 

**Nexperia** 

**PHPT60415PY** 

## **40 V, 15 A PNP high power bipolar transistor** 

**==> picture [497 x 374] intentionally omitted <==**

**----- Start of picture text -----**<br>
Symbol Parameter Conditions Min Typ Max Unit<br>fT transition frequency VCE = -10 V; IC = -500 mA; - 80 - MHz<br>f = 100 MHz; Tamb = 25 °C<br>Cc collector capacitance VCB = -10 V; IE = 0 A; ie = 0 A; - 140 - pF<br>f = 1 MHz; Tamb = 25 °C<br>aaa-016606 aaa-016607<br>600 -18<br>(1) IB = -220 mA<br>hFE IC -170 mA<br>(A)<br>(2) -130 mA<br>400 -12<br>-95 mA<br>-70 mA<br>-50 mA<br>(3) -35 mA<br>200 -6<br>-20 mA<br>-10 mA<br>-5 mA<br>0 0<br>-10 [-1] -1 -10 -10 [2] -10 [3] -10 [4] -10 [5] 0 -1 -2 -3 -4 -5<br>IC (mA) VCE (V)<br>VCE = -2 V Tamb = 25 °C<br>(1) Tamb = 100 °C Fig. 5. Collector current as a function of collector-<br>(2) Tamb = 25 °C emitter voltage; typical values<br>(3) Tamb = −55 °C<br>Fig. 4. DC current gain as a function of collector<br>current; typical values<br>**----- End of picture text -----**<br>


All information provided in this document is subject to legal disclaimers. **27 May 2015** 

PHPT60415PY **Product data sheet** 

© Nexperia B.V. 2017. All rights reserved 

**7 / 17** 

**Nexperia** 

**PHPT60415PY** 

## **40 V, 15 A PNP high power bipolar transistor** 

**==> picture [233 x 244] intentionally omitted <==**

**----- Start of picture text -----**<br>
aaa-016608<br>-1.2<br>VBE<br>(V)<br>-1.0<br>-0.8 (1)<br>-0.6 (2)<br>-0.4<br>(3)<br>-0.2<br>-10 [-1] -1 -10 -10 [2] -10 [3] -10 [4] -10 [5]<br>IC (mA)<br>VCE = -2 V<br>(1) Tamb = −55 °C<br>(2) Tamb = 25 °C<br>(3) Tamb = 100 °C<br>**----- End of picture text -----**<br>


**Fig. 6. Base-emitter voltage as a function of collector current; typical values** 

**==> picture [241 x 274] intentionally omitted <==**

**----- Start of picture text -----**<br>
aaa-016609<br>-1.2<br>VBEsat<br>(V)<br>-1.0<br>-0.8 (1)<br>(2)<br>-0.6<br>(3)<br>-0.4<br>-0.2<br>-10 [-1] -1 -10 -10 [2] -10 [3] -10 [4] -10 [5]<br>IC (mA)<br>IC/IB = 20<br>(1) Tamb = −55 °C<br>(2) Tamb = 25 °C<br>(3) Tamb = 100 °C<br>Fig. 7. Base-emitter saturation voltage as a function of<br>collector current; typical values<br>**----- End of picture text -----**<br>


**==> picture [497 x 297] intentionally omitted <==**

**----- Start of picture text -----**<br>
aaa-016610 aaa-016611<br>-1 -1<br>VCEsat VCEsat<br>(V) (V)<br>-10 [-1] -10 [-1]<br>(1) (1)<br>(2)<br>(2)<br>(3)<br>-10 [-2] -10 [-2] (3)<br>(4)<br>-10 [-3] -10 [-3]<br>-10 [-1] -1 -10 -10 [2] -10 [3] -10 [4] -10 [5] -10 [-1] -1 -10 -10 [2] -10 [3] -10 [4] -10 [5]<br>IC (mA) IC (mA)<br>IC/IB = 20 Tamb = 25 °C<br>(1) Tamb = 100 °C (1) IC/IB = 100<br>(2) Tamb = 25 °C (2) IC/IB = 50<br>(3) Tamb = −55 °C (3) IC/IB = 20<br>(4) IC/IB = 10<br>Fig. 8. Collector-emitter saturation voltage as a<br>function of collector current; typical values Fig. 9. Collector-emitter saturation voltage as a<br>function of collector current; typical values<br>**----- End of picture text -----**<br>


All information provided in this document is subject to legal disclaimers. 

PHPT60415PY 

© Nexperia B.V. 2017. All rights reserved 

**Product data sheet** 

**27 May 2015** 

**8 / 17** 

**Nexperia** 

**PHPT60415PY** 

## **40 V, 15 A PNP high power bipolar transistor** 

**==> picture [497 x 297] intentionally omitted <==**

**----- Start of picture text -----**<br>
aaa-016612 aaa-016613<br>10 [3] 10 [3]<br>RCEsat RCEsat<br>(Ω) (Ω)<br>10 [2] 10 [2]<br>(1)<br>10 10<br>(2)<br>(3)<br>1 1<br>(4)<br>(1)<br>10 [-1] 10 [-1]<br>(2)<br>(3)<br>10 [-2] 10 [-2]<br>-10 [-1] -1 -10 -10 [2] -10 [3] -10 [4] -10 [5] -10 [-1] -1 -10 -10 [2] -10 [3] -10 [4] -10 [5]<br>IC (mA) IC (mA)<br>IC/IB = 20 Tamb = 25 °C<br>(1) Tamb = 100 °C (1) IC/IB = 100<br>(2) Tamb = 25 °C (2) IC/IB = 50<br>(3) Tamb = −55 °C (3) IC/IB = 20<br>Fig. 10. Collector-emitter saturation resistance as a (4) IC/IB = 10<br>function of collector current; typical values Fig. 11. Collector-emitter saturation resistance as a<br>function of collector current; typical values<br>**----- End of picture text -----**<br>


All information provided in this document is subject to legal disclaimers. **27 May 2015** 

PHPT60415PY 

© Nexperia B.V. 2017. All rights reserved 

**Product data sheet** 

**9 / 17** 

**Nexperia** 

**PHPT60415PY** 

**40 V, 15 A PNP high power bipolar transistor** 

## **11. Test information** 

**==> picture [497 x 485] intentionally omitted <==**

**----- Start of picture text -----**<br>
- IB<br>90 % input pulse<br>(idealized waveform)<br>- IBon (100 %)<br>10 %<br>- IBoff<br>output pulse<br>- IC (idealized waveform)<br>90 %<br>- IC (100 %)<br>10 %<br>t<br>td tr ts tf<br>ton toff 006aaa266<br>Fig. 12. BISS transistor switching time definition<br>VBB VCC<br>RB RC<br>(probe) Vo (probe)<br>oscilloscope oscilloscope<br>450 Ω 450 Ω<br>R2<br>VI DUT<br>R1<br>mgd624<br>Fig. 13. Test circuit for switching times<br>**----- End of picture text -----**<br>


## **11.1 Quality information** 

This product has been qualified in accordance with the Automotive Electronics Council (AEC) standard _Q101 - Stress test qualification for discrete semiconductors_ , and is suitable for use in automotive applications. 

All information provided in this document is subject to legal disclaimers. 

PHPT60415PY 

© Nexperia B.V. 2017. All rights reserved 

**Product data sheet** 

**27 May 2015** 

**10 / 17** 

**Nexperia** 

**PHPT60415PY** 

**40 V, 15 A PNP high power bipolar transistor** 

## **12. Package outline** 

**Plastic single-ended surface-mounted package (LFPAK56; Power-SO8); 4 leads** 

**SOT669** 

||Dimensions (mm<br>H<br>D<br>L2<br>L1||||||E<br>b2|E<br>b2|E<br>b2|||A<br>w<br>A<br>0<br>scal<br>c2<br>4<br>mounting<br>base|A<br>w<br>A<br>0<br>scal<br>c2<br>4<br>mounting<br>base|A2|C<br>D1<br>C<br>X<br>A1|C<br>D1<br>C<br>X<br>A1|C<br>D1<br>C<br>X<br>A1|C<br>D1<br>C<br>X<br>A1|C<br>D1<br>C<br>X<br>A1||E1|E1|E1|_sot669_po_<br>0.1<br>L2<br>w<br>y<br>8°<br>0°<br>θ<br>1.3<br>0.8<br>0.25<br>b4<br>y C<br>q<br>(A3)|_sot669_po_<br>0.1<br>L2<br>w<br>y<br>8°<br>0°<br>θ<br>1.3<br>0.8<br>0.25<br>b4<br>y C<br>q<br>(A3)|_sot669_po_<br>0.1<br>L2<br>w<br>y<br>8°<br>0°<br>θ<br>1.3<br>0.8<br>0.25<br>b4<br>y C<br>q<br>(A3)|_sot669_po_<br>0.1<br>L2<br>w<br>y<br>8°<br>0°<br>θ<br>1.3<br>0.8<br>0.25<br>b4<br>y C<br>q<br>(A3)|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|||||||||||||||c<br>A<br>||||||||||||||
|||||||||||||||||||||||||||||
|||H<br><br>L<br>L|1||||||||||||||||||b3|||b4||||
|||||||||||||||||||||||||||||
||||D|||||||||||||||||||||||||
|||||||||||||||||||||||||||||
|||||||||||||||||||||||||||||
|||||||||||||||||||||||||||||
||||2|||||||||||||||||||||||||
|||||||||||||||||||||||||||||
|||||are||||||||||||||||||||||||
||||||||||||||||C<br>A1|||||||||||||
|||||||||||||||||||||||||||||
|||||||||||||||||||||||||||||
||||||||||||||||||||||L|||||||
|||||||||||||||||||||||||||||
||||||||||||||||5 mm||detail X|||||||y||||
||||||||||||||||||||||||||y||C|
|||||||||||||||e||||||||||||||
||Unit(1)<br>A||||A1<br>A2<br>A3<br>b<br>b2|||||||b3<br>b4<br>c<br>c2<br>D(1)|||D1(1)<br>E(1)<br>E1(1)<br>e<br>H||||||L<br>L1|||L2<br>w||||
||mm<br>max<br>nom<br>min<br>1.20<br>1.01<br>0.15<br>0.00<br>0.25<br>0.50<br>0.35<br>4.41<br>3.62<br>2.2<br>2.0<br>1.10<br>0.95<br>0.25<br>0.19<br>0.30<br>0.24<br>0.9<br>0.7<br>4.10<br>3.80||||||||||||||6.2<br>5.8<br>0.85<br>0.40<br>3.3<br>3.1<br>1.27<br>4.20<br>5.0<br>4.8<br>1.3<br>0.8|||||||||||||
||Note<br>1. Plastic or metal protrusions of 0.15 mm maximum per side are not included.|||||||||||||||||||||||||||
||Outline<br>version||||References||||||||||||European<br>projection||||||||Issue date|||
||||||IEC||||JEDEC||||JEITA|||||||||||||||
||SOT669||||MO-235||||||||||||||||||||~~11-03-25~~<br>13-02-27|||



## **Fig. 14. Package outline LFPAK56; Power-SO8 (SOT669)** 

PHPT60415PY All information provided in this document is subject to legal disclaimers. **Product data sheet** 

© Nexperia B.V. 2017. All rights reserved 

**27 May 2015** 

**11 / 17** 

**Nexperia** 

**PHPT60415PY** 

**40 V, 15 A PNP high power bipolar transistor** 

## **13. Soldering** 

**==> picture [482 x 573] intentionally omitted <==**

**----- Start of picture text -----**<br>
Footprint information for reflow soldering SOT669<br>4.7<br>4.2<br>0.9 0.6<br>(3×) (4×)<br>0.25 0.25<br>(2×) (2×)<br>3.45 3.5<br>0.6 2.55<br>(3×) 2<br>0.25<br>(2×)<br>SR opening = 1.1<br>Cu + 0.075<br>2.15<br>3.3<br>SP opening =<br>Cu - 0.050<br>0.7<br>1.27<br>(4×)<br>3.81<br>solder paste<br>solder lands<br>125 µm stencil<br>solder resist occupied area Dimensions in mm sot669_fr<br>**----- End of picture text -----**<br>


**==> picture [301 x 10] intentionally omitted <==**

**----- Start of picture text -----**<br>
Fig. 15. Reflow soldering footprint for LFPAK56; Power-SO8 (SOT669)<br>**----- End of picture text -----**<br>


**==> picture [47 x 9] intentionally omitted <==**

**----- Start of picture text -----**<br>
27 May 2015<br>**----- End of picture text -----**<br>


PHPT60415PY All information provided in this document is subject to legal disclaimers. 

© Nexperia B.V. 2017. All rights reserved **12 / 17** 

**Product data sheet** 

**Nexperia** 

**PHPT60415PY** 

**40 V, 15 A PNP high power bipolar transistor** 

**==> picture [481 x 574] intentionally omitted <==**

**----- Start of picture text -----**<br>
Wave soldering footprint information for LFPAK56 package SOT669<br>4.826<br>1.78<br>1.72<br>2.1<br>1.4<br>0.6 (x4) 1.27<br>0.635<br>solder lands<br>Dimensions in mm<br>15-04-13<br>Issue date 15-04-16 sot669_fw<br>**----- End of picture text -----**<br>


**==> picture [295 x 9] intentionally omitted <==**

**----- Start of picture text -----**<br>
Fig. 16. Wave soldering footprint for LFPAK56; Power-SO8 (SOT669)<br>**----- End of picture text -----**<br>


All information provided in this document is subject to legal disclaimers. 

PHPT60415PY 

© Nexperia B.V. 2017. All rights reserved 

**Product data sheet** 

**27 May 2015** 

**13 / 17** 

**Nexperia** 

**PHPT60415PY** 

## **40 V, 15 A PNP high power bipolar transistor** 

## **14. Revision history** 

|**14. Revision history**|**14. Revision history**|**14. Revision history**|**14. Revision history**|**14. Revision history**|
|---|---|---|---|---|
|**Table 8.**<br>**Revision history**|||||
|**Data sheet ID**|**Release date**|**Data sheet status**|**Change notice**|**Supersedes**|
|PHPT60415PY v.1|20150527|Product data sheet|-|-|



All information provided in this document is subject to legal disclaimers. 

PHPT60415PY 

© Nexperia B.V. 2017. All rights reserved 

**Product data sheet** 

**27 May 2015** 

**14 / 17** 

**Nexperia** 

**PHPT60415PY** 

**40 V, 15 A PNP high power bipolar transistor** 

## **15. Legal information** 

## **15.1 Data sheet status** 

|**Document**<br>**status [1]**<br>**[2]**|**Product**<br>**status[3]**|**Definition**|
|---|---|---|
|Objective<br>[short] data<br>sheet|Development|This document contains data from<br>the objective specification for product<br>development.|
|Preliminary<br>[short] data<br>sheet|Qualification|This document contains data from the<br>preliminary specification.|
|Product<br>[short] data<br>sheet|Production|This document contains the product<br>specification.|



[1] Please consult the most recently issued document before initiating or completing a design. 

[2] The term 'short data sheet' is explained in section "Definitions". 

[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nexperia.com. 

## **15.2 Definitions** 

**Preview** — The document is a preview version only. The document is still subject to formal approval, which may result in modifications or additions. Nexperia does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. 

**Draft** — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. Nexperia does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. 

**Short data sheet** — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local Nexperia sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. 

**Product specification** — The information and data provided in a Product data sheet shall define the specification of the product as agreed between Nexperia and its customer, unless Nexperia and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the Nexperia product is deemed to offer functions and qualities beyond those described in the Product data sheet. 

## **15.3 Disclaimers** 

**Limited warranty and liability** — Information in this document is believed to be accurate and reliable. However, Nexperia does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Nexperia takes no responsibility for the content in this document if provided by an information source outside of Nexperia. 

In no event shall Nexperia be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. 

Notwithstanding any damages that customer might incur for any reason whatsoever, Nexperia’s aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the _Terms and conditions of commercial sale_ of Nexperia. 

**Right to make changes** — Nexperia reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. 

**Suitability for use in automotive applications** — This Nexperia product has been qualified for use in automotive applications. Unless otherwise agreed in writing, the product is not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of a Nexperia product can reasonably be expected to result in personal injury, death or severe property or environmental damage. Nexperia and its suppliers accept no liability for inclusion and/or use of Nexperia products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. 

**Quick reference data** — The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. 

**Applications** — Applications that are described herein for any of these products are for illustrative purposes only. Nexperia makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. 

Customers are responsible for the design and operation of their applications and products using Nexperia products, and Nexperia accepts no liability for any assistance with applications or customer product design. It is customer’s sole responsibility to determine whether the Nexperia product is suitable and fit for the customer’s applications and products planned, as well as for the planned application and use of customer’s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. 

Nexperia does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer’s applications or products, or the application or use by customer’s third party customer(s). Customer is responsible for doing all necessary testing for the customer’s applications and products using Nexperia products in order to avoid a default of the applications and the products or of the application or use by customer’s third party customer(s). Nexperia does not accept any liability in this respect. 

**Limiting values** — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. 

**Terms and conditions of commercial sale** — Nexperia 

products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nexperia.com/profile/terms, unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. Nexperia hereby expressly objects to applying the customer’s general terms and conditions with regard to the purchase of Nexperia products by customer. 

All information provided in this document is subject to legal disclaimers. 

PHPT60415PY 

© Nexperia B.V. 2017. All rights reserved 

**Product data sheet** 

**27 May 2015** 

**15 / 17** 

**Nexperia** 

**PHPT60415PY** 

**40 V, 15 A PNP high power bipolar transistor** 

**No offer to sell or license** — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. 

**Export control** — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities. 

**Translations** — A non-English (translated) version of a document is for reference only. The English version shall prevail in case of any discrepancy between the translated and English versions. 

## **15.4 Trademarks** 

Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 

All information provided in this document is subject to legal disclaimers. 

PHPT60415PY 

© Nexperia B.V. 2017. All rights reserved 

**Product data sheet** 

**27 May 2015** 

**16 / 17** 

**Nexperia** 

**PHPT60415PY** 

**40 V, 15 A PNP high power bipolar transistor** 

## **16. Contents** 

|**16. **|**Contents**|
|---|---|
|**1**|**General description ............................................... 1**|
|**2**|**Features and benefits ............................................1**|
|**3**|**Applications ........................................................... 1**|
|**4**|**Quick reference data ............................................. 1**|
|**5**|**Pinning information ...............................................2**|
|**6**|**Ordering information .............................................2**|
|**7**|**Marking ...................................................................2**|
|**8**|**Limiting values .......................................................3**|
|**9**|**Thermal characteristics .........................................4**|
|**10**|**Characteristics .......................................................6**|
|**11**|**Test information ...................................................10**|
|11.1|Quality information ............................................. 10|
|**12**|**Package outline ................................................... 11**|
|**13**|**Soldering .............................................................. 12**|
|**14**|**Revision history ...................................................14**|
|**15**|**Legal information .................................................15**|
|15.1|Data sheet status ............................................... 15|
|15.2|Definitions ...........................................................15|
|15.3|Disclaimers .........................................................15|
|15.4|Trademarks ........................................................ 16|



## © **Nexperia B.V. 2017. All rights reserved** 

For more information, please visit: http://www.nexperia.com For sales office addresses, please send an email to: salesaddresses@nexperia.com **Date of release: 27 May 2015** 

All information provided in this document is subject to legal disclaimers. 

PHPT60415PY 

© Nexperia B.V. 2017. All rights reserved 

**Product data sheet** 

**27 May 2015** 

**17 / 17**