PH18CNR65PAT1SA

DISTANCE PHOTO

⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.

Manufacturer: CARLO GAVAZZI / PARTNER STOCK
Product type:
SVHC: No SVHC (25-Jun-2025)

Delivery and price
Units per pack	3
Price	104.02 €
Current stock	10+
Lead time	30 days

Datasheet

## **Photoelectrics Retro-reflective Type PH18CNR..., DC** 

- **Miniature sensor range** 

- **Range: 6.5 m** 

- **Sensitivity adjustment by potentiometer** 

- **Modulated, infrared light 850 nm** 

- **Supply voltage: 10 to 30 VDC** 

- **Output: 100 mA, NPN or PNP, N.O & N.C.** 

- **Degree of protection IP67, IP69K** 

- **LED indication for output, stability and power ON** 

- **Protection: reverse polarity, short circuit and transients** 

- **Cable, plug and pigtail versions** 

- **Excellent EMC performance** C€ @« EC@LAB 

**Product Descri tion Orderin Ke p g y PH18CNR65PAM1SA** The PH18CNR... is part of a Compact housing and high **Type** ~~—_—__—_—_______~~ family of inexpensive general power LED for excellent ~~——_—_~~ **Housing style square** ~~Ff~~ purpose retro-reflective senperformance-size ratio. **Housing size** sors in industrial standard 18 The potentiometer used for **Housing material** mm cylindrical and square adjustment of the sensitivi- **Housing type neutral** ABS housing. ty makes the sensors highly **Detection principle** The sensors are useful in flexible. The output type is **Sensing distance** applications where high-acNPN or PNP and the output **Output type** curacy detection as well as switching function is NO and **Output configuration** small size is required. NC. **Connection type Sensitive adjustment** 

## **T e Selection yp** 

|**Housing style**|**Range**|**Connection**|
|---|---|---|
||**Sn**||
|M18 Square type|6.5 m|Cable|
|M18 Square type|6.5 m|Plug|
|M18 Square type|6.5 m|Pigtail M12|



**Ordering no. Ordering no. NPN PNP Make & break switching Make & break switching PH 18 CNR 65 NASA PH 18 CNR 65 PASA PH 18 CNR 65 NAM1SA PH 18 CNR 65 PAM1SA PH 18 CNR 65 NAT1SA PH 18 CNR 65 PAT1SA** 

## **Specifications** according to EN60947-5-2 

|**Rated operating distance**(Sn) Up to 6.5 m,|) Up to 6.5 m,|
|---|---|
||reference target ER4<br>reflector ø 80 mm|
|**Blind zone**|50 mm @ Sn max.|
|**Sensitivity control**<br> Electrical adjustment<br>Mecanical adjustment<br>Adjustable distance to target 50-650 cm<br>**Temperature drift**<br>**Hysteresis**(H)<br> (differential travel)<br>**Rated operational volt.**(UB)<br>**Ripple**(Urpp)<br>**Output current**<br>Continuous (Ie)<br>Short-time (I)|Adjustable by potentiometer<br>210˚<br>240˚<br>et 50-650 cm<br>≤ 0.2%/ºC<br>≤ 20%<br>10 to 30 VDC<br>(ripple included)<br>≤ 10%<br>≤ 100 mA<br>≤ 100 mA|
|(max. load capacity100 nF)||
|**No load supply current**(Io)|≤ 25 mA @ 24 VDC|
|**Minimum operational current**(Im)|0.5 mA|
|**OFF-state current**(Ir)|≤ 100 µA|



|**Voltage drop **(Ud)|≤ 2.0 VDC @ 100 mA|
|---|---|
|**Protection**|Short-circuit, reverse|
||polarityand transients|
|**Light source**|LED,850 nm|
|**Light type**|Infrared,modulated|
|**Sensing angle**|± 2º|
|**Ambient light**|30.000 lux|
||Incandescent lamp|
|**Light spot Diameter**|Ø 164 mm @ 3.25 m|
|**Operating frequency**|500 Hz|
|**Response time**||
|OFF-ON (tON)|≤ 1.0 ms|
|ON-OFF(tOFF)|≤ 1.0 ms|
|**Power ON delay **(tv)|≤ 100 ms|
|**Output function**||
|Type|NPN or PNP|
|Switchingfunction|NO and NC|
|**Indication**||
|Output ON|LED, yellow|
|Signal stability and power ON|LED, green|



Specifications are subject to change without notice (12.06.2017) 

**1** 

**PH18CNR...** 

## **Specifications (cont.)** 

**==> picture [236 x 200] intentionally omitted <==**

**----- Start of picture text -----**<br>
||||
|---|---|---|
|Cable gland|POM, Black|
|Trimmer shaft|POM, Dark Grey|
|Locknuts|PP, black|
|Mounting bracket|PPA, black|
|Connection|
|Cable|PVC, grey, 2 m|
|4 x 0.25 mm|[2]|, Ø = 4.5 mm|
|Plug|M12, 4-pin|
|(CONB14NF-series)|
|Pigtail|PUR, grey, 30 cm|
|4 x 0.25 mm|[2]|, Ø = 4.5 mm|
|M12, 4-pin|
|(CONB14NF-series)|
|Weight|With cable: 85 g|
|With pigtail: 40 g|
|With plug: 25 g|
|CE-marking|Yes|
|Approvals|cULus (UL508)|
|supply class 2|

**----- End of picture text -----**<br>


**==> picture [244 x 210] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||||||||||
|---|---|---|---|---|---|---|---|---|---|
|Environment|
|Installation category|III (IEC 60664/60664A;|
|60947-1)|
|Pollution degree|3 (IEC 60664/60664A;|
|60947-1)|
|Degree of protection|IP 67, IP 69K*|
|Ambient temperature|
|Operating|-25|°|to +60|°|C (-13|°|to +140|°|F)|
|Storage|-40|°|to +70|°|C (-40|°|to +158|°|F)|
|Vibration|10 to 150 Hz, 1.0 mm/15 g|
|(IEC 60068-2-6)|
|Shock|30 g / 11ms, 3 pos, 3 neg|
|per axis|
|(IEC 60068-2-6, 60068-2-32)|
|Rated insulation voltage|500 VAC (rms)|
|IEC protection class III|
|Housing material|
|Body|ABS, grey|
|Backpart|PC-Transparent|
|Front material|PMMA, red|

**----- End of picture text -----**<br>


**==> picture [62 x 80] intentionally omitted <==**

**----- Start of picture text -----**<br>
90°<br>60°<br>30°<br>0°<br>**----- End of picture text -----**<br>


* The IP69K test according to DIN 40050-9 for high-pressure, high-temperature wash-down applications. The sensor must not only be dust tight (IP6X), but also able to withstand high-pressure and steam cleaning. The sensor is exposed to high pressure water from a spray nozzle that is fed with 80°C water at 8’000– 10’000 KPa (80–100bar) and a flow rate of 14–6L/min. The nozzle is held 100 –150 mm from the sensor at angles of 0°, 30°, 60° and 90° for 30s each. The test device sits on a turntable that rotates with a speed of 5 times per minute. The sensor must not suffer any damaging effects from the high pressure water in appearance and function. 

## **O eration Dia ram p g** 

tv = Power ON delay 

**==> picture [305 x 81] intentionally omitted <==**

**----- Start of picture text -----**<br>
ON<br>Power supply OFF<br>Present<br>Target Not Present a<br>Present<br>Object Not Present Se a<br>ON Tv<br>Break Output (N.C.) OFF es<br>ON Tv<br>Make Output (N.O.)  OFF eeE hlls oo T<br>**----- End of picture text -----**<br>


## **Wiring Diagrams** 

**==> picture [405 x 95] intentionally omitted <==**

**----- Start of picture text -----**<br>
NPN PNP<br>1 BN V 1 BN V<br>4 BK<br>2 WH<br>2 WH<br>4 BK<br>3 BU 3 BU<br>V GND V GND<br>**----- End of picture text -----**<br>


Specifications are subject to change without notice (12.06.2017) 

**2** 

**PH18CNR...** 

## **Detection Diagram** 

**==> picture [237 x 157] intentionally omitted <==**

**----- Start of picture text -----**<br>
Sensor<br>Y<br>X ER4<br>Reflector (feet)<br>0,0 6,6 13,1 19,7 26,2 32,8<br>150100 a 5,93,9<br>50 2,0<br>0 0,0<br>-50 -2,0<br>-100 -3,9<br>-150 -5,9<br>Pf<br>0,0 2,0 4,0 6,0 8,0 10,0<br>Distance (m)<br>(mm) (inch)<br>**----- End of picture text -----**<br>


## **Si nal Stabilit Indication g y** 

**==> picture [219 x 103] intentionally omitted <==**

**----- Start of picture text -----**<br>
Excess Gain<br>1.1 Operation level x 1.1<br>1.0 Operation level<br>0.9 Operation level x 0.9<br>Time<br>Green LED ON<br>Yellow LED ON<br>**----- End of picture text -----**<br>


## **Excess Gain** 

**==> picture [221 x 142] intentionally omitted <==**

**----- Start of picture text -----**<br>
(feet)<br>0,0 6,6 13,1 19,7 26,2 32,8<br>1.000<br>——$—_—_____<br>100<br>10<br>1 po<br>0,0 2,0 4,0 6,0 8,0 10,0<br>Distance (m)<br>Excess Gain<br>**----- End of picture text -----**<br>


## **APH18-MB1** 

**==> picture [177 x 93] intentionally omitted <==**

**----- Start of picture text -----**<br>
6.5<br>Ø 27<br>Ø 27<br>6.5<br>**----- End of picture text -----**<br>


## **Mountin S stems g y** 

**==> picture [141 x 87] intentionally omitted <==**

**----- Start of picture text -----**<br>
M18 Locknut<br>APH18-MB1<br>Min. 1.0 mm<br>Max. 4.5 mm<br>**----- End of picture text -----**<br>


PH18 mounting with a combination of 1 x APH18-MB1 and 1 x M18 locknut. Maximum torque 0.9 NM 

Specifications are subject to change without notice (12.06.2017) 

**3** 

**PH18CNR...** 

## **Dimensions** 

**==> picture [72 x 72] intentionally omitted <==**

**==> picture [500 x 452] intentionally omitted <==**

**----- Start of picture text -----**<br>
Cable/Pigtail version<br>31.5 Power and Stability  15 Operation  Power and Stability  Pigtail M12<br>10.5 17.5 Indicator (Green) Indicator (Yellow) Indicator (Green)<br>3.4<br>3 Emitter<br>Sensitivity Control 240°<br>Receiver<br>Optical Axis<br>Ø 9.9<br>Ø 4.5<br>Plug version<br>31.5 Power and Stability  15 Operation  Power and Stability<br>10.5 17.5 Indicator (Green) Indicator (Yellow) Indicator (Green)<br>3.4<br>3 Emitter<br>Sensitivity Control 240°<br>Receiver<br>Optical Axis<br>M12 x 1 plug<br>1<br>2 4<br>3<br>1<br>2 4<br>3<br>1.5<br>5.45<br>11<br>3.5<br>24.1 35<br>M18 x 1 3.5<br>6.3<br>1.5<br>5.45<br>11<br>3.5<br>24.1 35<br>M18 x 1 3.5<br>10.8<br>**----- End of picture text -----**<br>


## **Installation Hints** 

**==> picture [500 x 119] intentionally omitted <==**

**----- Start of picture text -----**<br>
To avoid interference from inductive voltage / Relief of the cable strain Protection of the sensing face Sensor mounted on a mobile carrier<br>current peaks, separate the proximity switch<br>cables from any other power cables. E.g.<br>Engine, contactor or solenoid cables<br>Incorrect Incorrect<br>Incorrect<br>Correct Correct<br>> 100 mm<br>A proximity switch should not serve Any repetitive flexing of the<br>The cable should not be pulled as mechanical stop cable should be avoided<br>**----- End of picture text -----**<br>


Specifications are subject to change without notice (12.06.2017) 

**4** 

## **Deliver Contents y** 

- Photoelectric switch: PH 18 CNR... 

- Installation instruction on plastic bag 

**==> picture [72 x 72] intentionally omitted <==**

## **Accessories** 

   - Connector type CONG1A.. / CONB14NF.. series 

   - Reflector type ER.. - to be purchased separately 

- Screwdriver 

- Mounting bracket APH18-MB1 

- 1 M18 locknuts 

- **Packaging:** Plastic bag 

Specifications are subject to change without notice (12.06.2017) 

**5**

Updated at April 27, 2026

About Novapart

Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 540,000+ components from 500+ manufacturers.

Learn more →

Stock Shortage Specialist

When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.

Request a quote →

Compliant Alternatives

We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.

BOM Analysis service →