PGL6395.700HLT

SMT Power Inductors _Power Beads - PGL6395.XXXHLT Series_ 

_**Current Rating:** Over 140A_ _**Inductance Range:** 70nH to 220nH_ _**Height:** 10.0mm Max_ 

_**Footprint:** 10.2mm x 4.6mm Max_ 

|Part<br>Number|Electrical Specifications @ 25°C — Operating Temperature -40°C to +125°C<br>Inductance<br>@ 0 ADC<br>(nH+/-15%)|Electrical Specifications @ 25°C — Operating Temperature -40°C to +125°C<br>Inductance<br>15%)<br>Inductance<br>@ I sat<br>(nH MIN)|Electrical Specifications @ 25°C — Operating Temperature -40°C to +125°C<br>Irated<br>(ADC)|Electrical Specifications @ 25°C — Operating Temperature -40°C to +125°C<br>DCR<br>mohms<br>(+/-10%)|Electrical Specifications @ 25°C — Operating Temperature -40°C to +125°C<br>Saturation Current5<br>(A TYP)|Electrical Specifications @ 25°C — Operating Temperature -40°C to +125°C<br>Saturation Current5<br>(A TYP)|Electrical Specifications @ 25°C — Operating Temperature -40°C to +125°C<br>Saturation Current5<br>(A TYP)|Irms|
|---|---|---|---|---|---|---|---|---|
||||||25°C|(A TYP)<br>100°C|125°C||
|PGL6395.700HLT|70|50|70|0.23|141|120|113|70|
|PGL6395.101HLT|100|72|70||98|83|77||
|PGL6395.121HLT|120|82|70||82|70|65||
|PGL6395.221HLT|220|141|42||42|36|33||



## **NOTES:** 

1. Inductance measured at 100kHz, 100mVrms. 

2. Inductance at Irated is the value of the inductance at 25°C at the listed rated current. 

3. The rated current as listed is either the saturation current (25°C or 100°C) or the heating current depending on which value is lower. 

4. The nominal DCR is measured at point LN 2. , as shown below on the mechanical drawing. 

5. The saturation current is the typical current which causes the inductance to drop by 20% at the stated ambient temperatures (25°C, 100°C ). This current is determined by placing the component in the specified ambient environment and applying a short duration pulse current (to eliminate self-heating effects) to the component. 

6. The heating current is the DC current which causes the part temperature to increase by approximately 40°C when used in a typical application. 

to core losses in the inductor which may neccessitate derating the current in order to limit the temperature rise of the component. To determine the approximate total losses (or temperature rise) for a given application, the core loss and temperature rise curves can be used. 

   8. Parts with the HLT suffix are sold in tape and reel packaging. Pulse complies to industry standard tape and reel specification EIA-481. 

      - The tape and reel for this product has a width (W=24mm), pitch (Po=12mm) and depth (Ko=10.3mm). Samples of these parts can be ordered by removing the HLT suffix and replacing with HL. 

   9. The temperature of the component (ambient plus temperature rise) must be within the stated operating temperature range. 

   10. Sample Value only. Guaranteed by Design and not tested in production 

7. In high volt*time applications, additional heating in the component can occur due 

**==> picture [46 x 11] intentionally omitted <==**

**----- Start of picture text -----**<br>
Mechanical<br>**----- End of picture text -----**<br>


## **Schematic** 

## **PGL6395.XXXHLT** 

**Weight:** 1.99grms **Tape &Reel:** 400/ Reel **Dimensions:** mm Unless otherwise specified , all tolerances are ± 0.25 

P933.Pre (10/22) 

PulseElectronics.com 

1 

_Power Beads - PGL6395.XXXHLT Series_ 

## SMT Power Inductors 

## **L vs I Curves** 

## **PGL6395.700HLT, L vs I  Curve** 

## **PGL6395.101HLT, L vs I  Curve** 

P933.Pre (10/22) 

PulseElectronics.com 

2 

SMT Power Inductors _Power Beads - PGL6395.XXXHLT Series_ 

## **PGL6395.121HLT, L vs I  Curve** 

**PGL6395.221HLT, L vs I  Curve** 

P933.Pre (10/22) 

PulseElectronics.com 

3 

SMT Power Inductors _Power Beads - PGL6395.XXXHLT Series_ 

## **PGL6395.XXXHLT Coreloss** ee 

**==> picture [343 x 188] intentionally omitted <==**

**----- Start of picture text -----**<br>
1.0<br>0.9 Pt 1000 800KHz 600KHz<br>0.8 a KHz 400<br>KHz 300<br>0.7 a ee 500 KHz<br>KHz<br>0.6 ee ee ee a eee e e A ee 200<br>KHz<br>0.5<br>0.4<br>0.3<br>0.2<br>0.1<br>0.0<br>0 200 400 600 800 1000 1200 1400 1600 1800 2000<br>ΔB<br>where ΔB = 0.37 * L(nH) * ΔI<br>CoreLoss (W)<br>**----- End of picture text -----**<br>


## For More Information: 

**Americas -** prodinfo_power_americas@yageo.com  | **Europe -** prodinfo_power_emea@yageo.com  | **Asia -** prodinfo_power_asia@yageo.com 

Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2022. Pulse Electronics, Inc. All rights reserved. 4 PulseElectronics.com P933.Pre (10/22) a YAGEO company re © Pulse