PE-53914NLT
COMMON MODE INDUCTOR, AEC-Q200, 13.2MH
- Manufacturer: PULSE ELECTRONICS
- Product type: SMD Common Mode Chokes / Filters
- Inductance: 13.2mH
- Product Range: PE-XXXXNL Series
- Product Width: 14.22mm
- Qualification: AEC-Q200
- Product Height: 8.89mm
- Product Length: 16.38mm
- DC Current Rating: 500mA
- Common Mode Filter Case: 16.38mm x 14.22mm x 8.89mm
| Delivery and price | |
|---|---|
| Units per pack | 100 |
| Price | 1.62 € |
| Current stock | 10+ |
| Lead time | 30 days |
## SMT Common Mode Inductors _0.5A to 3.6A_ _Pick and place compatible Rated voltage 250Vac Low RFI toroid Tape & Reel packaging available_ Electrical Specifications @ 25°C - Operating Temperature -40°C to +125°C |Electrical Specifications @ 25°C - Operating Temperature -40°C to +125°C<br>**Part**<br>**Number**<br>**Inductance**<br>(mH MIN)<br>**Irated**<br>(A)<br>**DCR (MAX)**<br>(mΩ)<br>**Typical**<br>**SRF**<br>(MHz)<br>**Impedance**<br>**Curve**<br>**Size**<br>**Code**<br>**Weight**<br>(Grams)<br>**Quantity**<br>**In Tube**<br>1, 2|Electrical Specifications @ 25°C - Operating Temperature -40°C to +125°C<br>**Part**<br>**Number**<br>**Inductance**<br>(mH MIN)<br>**Irated**<br>(A)<br>**DCR (MAX)**<br>(mΩ)<br>**Typical**<br>**SRF**<br>(MHz)<br>**Impedance**<br>**Curve**<br>**Size**<br>**Code**<br>**Weight**<br>(Grams)<br>**Quantity**<br>**In Tube**<br>1, 2|Electrical Specifications @ 25°C - Operating Temperature -40°C to +125°C<br>**Part**<br>**Number**<br>**Inductance**<br>(mH MIN)<br>**Irated**<br>(A)<br>**DCR (MAX)**<br>(mΩ)<br>**Typical**<br>**SRF**<br>(MHz)<br>**Impedance**<br>**Curve**<br>**Size**<br>**Code**<br>**Weight**<br>(Grams)<br>**Quantity**<br>**In Tube**<br>1, 2|Electrical Specifications @ 25°C - Operating Temperature -40°C to +125°C<br>**Part**<br>**Number**<br>**Inductance**<br>(mH MIN)<br>**Irated**<br>(A)<br>**DCR (MAX)**<br>(mΩ)<br>**Typical**<br>**SRF**<br>(MHz)<br>**Impedance**<br>**Curve**<br>**Size**<br>**Code**<br>**Weight**<br>(Grams)<br>**Quantity**<br>**In Tube**<br>1, 2|Electrical Specifications @ 25°C - Operating Temperature -40°C to +125°C<br>**Part**<br>**Number**<br>**Inductance**<br>(mH MIN)<br>**Irated**<br>(A)<br>**DCR (MAX)**<br>(mΩ)<br>**Typical**<br>**SRF**<br>(MHz)<br>**Impedance**<br>**Curve**<br>**Size**<br>**Code**<br>**Weight**<br>(Grams)<br>**Quantity**<br>**In Tube**<br>1, 2|Electrical Specifications @ 25°C - Operating Temperature -40°C to +125°C<br>**Part**<br>**Number**<br>**Inductance**<br>(mH MIN)<br>**Irated**<br>(A)<br>**DCR (MAX)**<br>(mΩ)<br>**Typical**<br>**SRF**<br>(MHz)<br>**Impedance**<br>**Curve**<br>**Size**<br>**Code**<br>**Weight**<br>(Grams)<br>**Quantity**<br>**In Tube**<br>1, 2|Electrical Specifications @ 25°C - Operating Temperature -40°C to +125°C<br>**Part**<br>**Number**<br>**Inductance**<br>(mH MIN)<br>**Irated**<br>(A)<br>**DCR (MAX)**<br>(mΩ)<br>**Typical**<br>**SRF**<br>(MHz)<br>**Impedance**<br>**Curve**<br>**Size**<br>**Code**<br>**Weight**<br>(Grams)<br>**Quantity**<br>**In Tube**<br>1, 2|Electrical Specifications @ 25°C - Operating Temperature -40°C to +125°C<br>**Part**<br>**Number**<br>**Inductance**<br>(mH MIN)<br>**Irated**<br>(A)<br>**DCR (MAX)**<br>(mΩ)<br>**Typical**<br>**SRF**<br>(MHz)<br>**Impedance**<br>**Curve**<br>**Size**<br>**Code**<br>**Weight**<br>(Grams)<br>**Quantity**<br>**In Tube**<br>1, 2|Electrical Specifications @ 25°C - Operating Temperature -40°C to +125°C<br>**Part**<br>**Number**<br>**Inductance**<br>(mH MIN)<br>**Irated**<br>(A)<br>**DCR (MAX)**<br>(mΩ)<br>**Typical**<br>**SRF**<br>(MHz)<br>**Impedance**<br>**Curve**<br>**Size**<br>**Code**<br>**Weight**<br>(Grams)<br>**Quantity**<br>**In Tube**<br>1, 2| |---|---|---|---|---|---|---|---|---| |**PE-53914NL**|13.2|0.50|850|0.3|5|LCCI-37|2.4|30| |**PE-53913NL**|6.0|1.00|450|0.5|4|LCCI-37|2.4|30| |**PE-53912NL**|1.8|2.50|80|2.2|3|LCCI-50|5.2|30| |**PE-53911NL**|0.9|1.50|60|2|2|LCCI-37|2.5|30| |**PE-53910NL**|0.6|3.60|50|4|1|LCCI-50|5.3|30| ## **Notes:** 1. Optional Tape & Reel packaging can be ordered by adding a “ **T** ” suffix to the equivalent to NL versions. If a part number does not have the “ **NL** ” part number (i.e. PE-53914L becomes PE-53914L **T** ). Pulse complies to industry suffix, but an RoHS compliant versions is required, please contact standard tape and reel specification EIA481. Pulse for availability. 2. The “ **NL** ” suffix indicates an RoHS-compliant part number. Non-NL suffixed 3. The temperature of the component (ambient plus temperature rise) parts are not necessarily RoHS compliant, but are electrically and mechanically must be within the stated operating temperature range. ## **Mechanicals Schematics** **==> picture [41 x 10] intentionally omitted <==** **----- Start of picture text -----**<br> PE-XXXXNL<br>**----- End of picture text -----**<br> **==> picture [276 x 247] intentionally omitted <==** **----- Start of picture text -----**<br> 1 2<br>4 Or VY __o 3<br>1:1 ±2%<br>Typical Impedance Curves<br>;<br>7K<br>5<br>6K 4<br>5K 3<br>4K Poe RE<br>Pi Ae KN<br>3K rt il AA, TIAN NLL<br>2<br>2K<br>1<br>1K OeSS TT<br>0 Creat SSN<br>0 0.01 0.1 1 10 100<br>pecker Frequency (MHz) TTT SS<br>Size A B C D E F<br>LCCI-37 .560/14,22 .645/16,38 .350/8,89 .520/13,21 .340/8,64 .530/13,46<br>LCCI-50 .670/17,02 .770/19,56 .390/9,90 .650/16,51 .445/11,30 .660/16,76<br>)( Impedance Ω<br>**----- End of picture text -----**<br> **==> picture [487 x 12] intentionally omitted <==** **----- Start of picture text -----**<br> 1 power.pulseelectronics.com SPM2007 (01/18) http://www.power.pulseelectronics.com/contact<br>**----- End of picture text -----**<br> ## SMT Common Mode Inductors _0.5A to 3.6A_ ## Application These transformers have been designed for use at the interface between line driver and receiver and the interconnecting medium in Digital Audio Data Transmission Systems according to AES 3-199X or IEC 958. In such systems, two channels of periodically sampled and uniformly quantized audio signals are transmit on a single shielded twisted pair. These transformers are recommended for use with the Cirrus Logic CS8401, CS8402, CS8403 and CS8404 “Digital Audio Interface Transmit Device. The schematic below represents an implementation of transmit and receive circuits using isolation transformers at both ends. Equalization in the receiver may permit to increase the length of the interconnecting cable. The electrical parameters of the interface are based on those of CCITT V.II or balanced voltage digital circuits which allow signal transmission up to a few hundred meters. The isolation transformers are essential in improving the balance of the transmitter and the receiver circuitry, and reducing common mode noise and EMI. ## **Applicable Documents** AES 3-1985 (ANSI S4.40-1985), AES 3-199XDraft, IEC 958, CP-340, EBU 3250 ## Application Chart ## For More Information |**Pulse Worldwide**|**Pulse Europe**|**Pulse China Headquarters**|**Pulse North China**|**Pulse South Asia**|**Pulse North Asia**| |---|---|---|---|---|---| |**Headquarters**|Pulse Electronics GmbH|Pulse Electronics (ShenZhen) CO., LTD|Room 2704/2705|3 Fraser Street|1F, No.111| |15255 Innovation Drive Ste 100|Am Rottland 12|D708, Shenzhen Academy of|Super Ocean Finance Ctr.|0428 DUO Tower|Xiyuan Road| |San Diego, CA 92128|58540 Meinerzhagen|Aerospace Technology,|2067 Yan An Road West|Singapore 189352|Zhongli District| |U.S.A.|Germany|The 10th Keji South Road,|Shanghai 200336||Taoyuan City 32057| |||Nanshan District, Shenzhen, P.R.|China||Taiwan (R.O.C)| |||China 518057|||| |Tel: 858 674 8100|Tel: 49 2354 777 100|Tel: 86 755 33966678|Tel: 86 21 62787060|Tel: 65 6287 8998|Tel: 886 3 4356768| |Fax: 858 674 8262|Fax: 49 2354 777 168|Fax: 86 755 33966700|Fax: 86 2162786973|Fax: 65 6280 0080|Fax: 886 3 4356820| Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2017. Pulse Electronics, Inc. All rights reserved. SPM2007 (01/18) http://www.power.pulseelectronics.com/contact 2 power.pulseelectronics.com
Updated at February 9, 2023
Pulse Electronics, a YAGEO company, is a global leader in the design and manufacturing of passive electronic components. With a legacy of innovation dating back to 1956, the company provides essential technology for the communications, computing, industrial, transportation, and IoT sectors. Pulse is recognized worldwide for delivering high-performance solutions that power advanced applications, ranging from 5G networks and electric vehicles to data centers and smart grids. The company's extensive product portfolio is heavily anchored in power and networking magnetics. This includes a comprehensive range of power inductors engineered for exceptional efficiency and reliability in demanding environments. To address complex electromagnetic compatibility challenges, Pulse also manufactures highly effective EMC and RFI suppression solutions, such as common mode chokes and filters, alongside specialized toroidal and RF inductors designed to ensure clean power delivery and optimal signal integrity. Beyond traditional magnetics, Pulse excels in the development of advanced wireless and power conversion components. Their connectivity solutions feature a wide array of high-performance RF antennas and single-band chip antennas tailored for modern connected devices. Furthermore, to support sophisticated power architectures, Pulse provides a broad spectrum of transformers—encompassing PCB-mounted designs, current sensing transformers, and precise pulse transformers—equipping engineers with robust, industry-proven components for power isolation and measurement.
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →