PDU620-13

**PDU620** 

## **6A ULTRA-FAST RECOVERY RECTIFIER PowerDI 5** 

## **Features** 

Glass Passivated Die Construction Ultra-Fast Recovery Time for High Efficiency High Maximum Junction Temperature High Forward Surge Current Capability 

For Use in Low Voltage, High Frequency Inverters, Free Wheeling, and Polarity Protection Applications 

**Lead Free Finish, RoHS Compliant (Note 1) "Green" Molding Compound (No Br, Sb) Qualified to AEC-Q101 Standards for High Reliability** 

TOP VIEW 

## **Mechanical Data** 

Case: PowerDI 5 Case Material: Molded Plastic, “Green” Molding Compound. UL Flammability Classification Rating 94V-0 Moisture sensitivity:  Level 1 per J-STD-020C 

Terminals: Finish – Matte Tin annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208 **e3** Polarity: See Diagram on Page 4 Marking: See Page 3 Weight: 0.096 grams (approx.) 

BOTTOM VIEW 

**Maximum Ratings** @ TA = 25 C unless otherwise specified 

Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. 

|**Characteristic**|**Symbol**|**Value**|**Unit**|
|---|---|---|---|
|Peak Repetitive Reverse Voltage<br>Working Peak Reverse Voltage<br>DC Blocking Voltage|VRRM<br>VRWM<br>VR|200|V|
|RMS Reverse Voltage|VR(RMS)|141|V|
|Average Rectified Output Current (See also figure 4)|IO|6|A|
|Non-Repetitive Peak Forward Surge Current<br>8.3ms Single half sine-wave Superimposed on Rated Load|IFSM|150|A|



## **Thermal Characteristics** 

~~OG~~ **Characteristic Symbol Typ Max Unit** ~~pe~~ Thermal Resistance Junction to Soldering Point R JS 1.5 C/W ~~pe~~ Thermal Resistance Junction to Ambient Air (Note 2)                  TA = 25 C R JA 95 C/W ~~pe~~ Thermal Resistance Junction to Ambient Air (Note 3)                  TA = 25 C R JA 60 C/W ~~pe~~ Thermal Resistance Junction to Ambient Air (Note 4)                  TA = 25 C R JA 40 C/W ~~a~~ Operating Temperature Range Tj -65 to +175 °C ~~a~~ Storage Temperature Range TSTG -65 to +175 °C 

Notes:       1.  RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7. 

2.  FR-4 PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf. 

3.  Polymide PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf. 

4.  Polymide PCB, 2 oz. Copper.  Cathode pad dimensions 9.4mm x 7.2mm.  Anode pad dimensions 2.7mm x 1.6mm. 

DS30760 Rev. 2 - 2 PowerDI is a trademark of Diodes Incorporated. 

1 of 4 **www.diodes.com** 

PDU620 Diodes Incorporated 

**Electrical Characteristics** @ TA = 25 C unless otherwise specified 

**==> picture [506 x 654] intentionally omitted <==**

**----- Start of picture text -----**<br>
GO Characteristic Symbol Value Unit Test Condition<br>Minimum Reverse Breakdown Voltage (Note 5) V(BR)R 200 V IR = 5 A<br>a GS 0.940 IF = 6A, TS =   25 C<br>Maximum Forward Voltage VFM 0.8600.975 V IIFF = 6A, T = 8A, TSS = 150 =   25 CC<br>0.895 IF = 8A, TS = 150 C<br>OO Maximum Reverse Leakage Current (Note 5) IRM 5005 A TTSS =   25 = 100 C, VC, VRR = 200V = 200V<br>Maximum Reverse Recovery Time trr 25 ns IIFRR = 0.5A, I = 0.25A (See figure 7)R = 1.0A<br>Notes: 5.   Short duration test pulse used to minimize self-heating effect.<br>100<br>1,000<br>T = 175°C<br>10 Tj = 175°C j<br>100 T = 150°C<br>j<br>T = 150°C<br>1 FLOSS j FESSERRE<br>f/f 10<br>f~f- >= SE88050>=— ===<br>100m Tj = 125°C Tj = 125°C<br>— Ud<br>[ee][ee] Tj = 85°C 1 ca Tj = 85°C<br>10m ee [/] [{2] ff, Cé*8S SGee>=-—— aes e nneeen<br>T = 25°C 0.1<br>1m j<br>T = 25°C<br>j<br>0.01<br>Tj = -65°C Tj = -65°C<br>ton WA OF |Pf, 0.001 PLEertTE TT yy<br>0 0.2 0.4 0.6 0.8 1 1.2 1.4 0 40 80 120 160 200<br>VF, INSTANTANEOUS FORWARD VOLTAGE (V) VR, INSTANTANEOUS REVERSE VOLTAGE (V)<br>Fig. 1 Typical Forward Characteristics Fig. 2 Typical Reverse Characteristics<br>400 7.5<br>f = 1MHz<br>350<br>Pf ff ft TTT<br>6<br>300<br>| ft ft ty ITT<br>250 V e R E Note 4 E<br>4.5<br>200 AC B s Note 3 c<br>150 Nee 3 BERS SAQANEEREE<br>100 Pret<br>P| [ST] SE TTT PN Note 2 S ENT<br>1.5<br>50 oP CTT SAANNN TT<br>ee t<br>0<br>0 COCO<br>0 10 20 30 SS<br>0 25 50 75 100 125 150 175<br>VR, REVERSE VOLTAGE (V) TA, AMBIENT TEMPERATURE (°C)<br>Fig. 3 Typical Total Capacitance vs. Reverse Voltage Fig. 4 DC Forward Current Derating<br>, DC FORWARD CURRENT (A)<br>I<br>, TOTAL CAPACITANCE (pF)<br>C<br>, INSTANTANEOUS FORWARD CURRENT (A)<br>I<br>T F<br>F<br>**----- End of picture text -----**<br>


Notes: 5.   Short duration test pulse used to minimize self-heating effect. 

DS30760 Rev. 2 - 2 PowerDI is a trademark of Diodes Incorporated. 

2 of 4 **www.diodes.com** 

PDU620 

**==> picture [503 x 442] intentionally omitted <==**

**----- Start of picture text -----**<br>
6 250<br>IPK Note 2<br>IAV = 1 (DC)<br>200<br>4.5<br>EERE =<br>150<br>3<br>100<br>1.5<br>50<br>EPZEEEEe | | tt tt fp<br>0 ALLEL EE 0 ft}it tf] ft<br>0 1 2 3 4 5 6 7 8 9 10 0 50 100 150 200<br>IF, FORWARD CURRENT (A) TA, DERATED AMBIENT TEMPERATURE (°C)<br>Fig. 6 Operating Temperature Derating<br>Fig. 5 Forward Power Dissipation<br>t rr 1<br>+0.5A<br>Device<br>Under (-)<br>Test 0A<br>(+)<br>50V DC Pulse<br>Approx Generator -0.25A<br>(-) (Note 2)<br>Oscilloscope (+)<br>(Note 1)<br>Notes: -1.0A TWEE EEL<br>1. Rise Time = 7.0ns max. Input Impedance = 1.0MQ, 22pF.<br>Set time base for 50/100 ns/cm<br>, DC REVERSE VOLTAGE (V)<br>V<br>, FORWARD POWER DISSIPATION (W)<br>P<br>R<br>F<br>**----- End of picture text -----**<br>


Fig. 7 Reverse Recovery Time Characteristic and Test Circuit 

## **Ordering Information**[(Note 6)] 

|**Device**|**Packaging**|**Shipping**|
|---|---|---|
|PDU620-13|PowerDI 5|5000/Tape & Reel|



Notes: 6. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. 

## **Marking Information** 

U620 U620 = Product type marking code = Manufacturers’ code marking it YYWW = Date code marking ) tl Di YY = Last digit of year ex: 06 for 2006 YYWWK WW = Week code 01 to 52 K = Factory Designator 

DS30760 Rev. 2 - 2 

3 of 4 

PDU620 

**www.diodes.com** 

PowerDI is a trademark of Diodes Incorporated. 

## **Package Outline Dimensions** 

A D A2 L1 ~~fea b2~~ t ~~bf~~ **PowerDI 5 Dim Min Max** E E1 **A** 1.05 1.15 **A2** 0.33 0.43 [- ~~]~~ T ~~TT~~ L1 **b1** 0.80 0.99 e b1 i ~~a~~ t b1 ~~t~~ A2 ~~=~~ **b2** 1.70 1.88 **D** 3.90 4.05 A ~~t~~ D ~~el —~~ D2 **D2** 3.05 NOM ~~b2~~ L **E** 6.40 6.60 **e** 1.84 NOM E2 E **E1** 5.30 5.45 W L1 **E2** 3.55 NOM ~~fy FES~~ **L** 0.75 0.95 e b1 b1 **L1** 0.50 0.65 ~~4a —~~ **W** 1.20 1.50 **LEFT PIN BOTTOMSIDE RIGHT PIN** _ ~~—~~ **HEAT SINK** ~~TT~~ **All Dimensions in mm Note: Pins Left & Right must be electrically connected at the printed circuit board.** 

## IMPORTANT NOTICE 

Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agreetoholdDiodesIncorporatedandallthecompanieswhoseproductsarerepresentedonourwebsite,harmlessagainstalldamages. 

## LIFE SUPPORT 

DiodesIncorporatedproductsarenotauthorizedforuseascriticalcomponentsinlifesupportdevicesorsystemswithouttheexpressedwrittenapprovalofthe PresidentofDiodesIncorporated. 

DS30760 Rev. 2 - 2 PowerDI is a trademark of Diodes Incorporated. 

4 of 4 **www.diodes.com** 

PDU620