PDR5G-13

**PDR5G** 

## **5A GLASS PASSIVATED RECTIFIER** _**PowerDI 5**_ 

## **Features** 

Glass Passivated Die Construction 

Glass Passivated Die Construction D A A2 Low Leakage Current b2 **Lead Free Finish, RoHS Compliant (Note 1)** L1 ~~Sr be~~ **PowerDI** . **5 "Green" Molding Compound (No Br, Sb)** E E1 **Dim Min Max Qualified to AEC-Q101 Standards for High Reliability A** 1.05 1.15 L1 ~~iB) i a~~ **A2** 0.33 0.43 ~~JUL~~ e = ~~FR~~ **b1** 0.80 0.99 b1 b1 A2 **b2** 1.70 1.88 **Mechanical Data** ~~di~~ t ~~-~~ k = ~~-_- E+~~ D **D** 3.90 4.05 D2 Case: PowerDI 5 b2 **D2** 3.05 NOM Case Material: Molded Plastic, “Green” Molding L **E** 6.40 6.60 Compound. UL Flammability Classification Rating 94V-0 E2 E **e** 1.84 NOM Moisture Sensitivity:  Level 1 per J-STD-020C **E1** 5.30 5.45 ~~.~~ Terminals: Finish – Matte Tin annealed over Copper W L1 leadframe. Solderable per MIL-STD-202, Method 208 **e3 E2** 3.55 NOM Polarity: See Diagram e **L** 0.75 0.95 b1 b1 ~~:~~ Marking: See Page 3 **L1** 0.50 0.65 Weight: 0.096 grams (approximate) ee **LEFT PIN BOTTOMSIDE** ~~e~~ e ~~oo~~ **W** 1.20 1.50 **RIGHT PIN** ~~—~~ **HEAT SINK** ~~a~~ **All Dimensions in mm** 

## **Mechanical Data** 

**Note:   Pins Left & Right must be electrically connected at the printed circuit board.** 

## **Maximum Ratings** 

@ TA = 25 C unless otherwise specified 

Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. 

|Single phase, half wave, 60Hz, resistive or inductive load.<br>For capacitive load, derate current by 20%.||||
|---|---|---|---|
|**Characteristic**|**Symbol**|**Value**|**Unit**|
|Peak Repetitive Reverse Voltage<br>Working Peak Reverse Voltage<br>DC Blocking Voltage|VRRM<br>VRWM<br>VR|400|V|
|RMS Reverse Voltage|VR(RMS)|283|V|
|Average Rectified Output Current (See also figure 4)|IO|5|A|
|Non-Repetitive Peak Forward Surge Current<br>8.3ms Single half sine-wave Superimposed on Rated Load|IFSM|100|A|



## **Thermal Characteristics** 

|**Thermal Characteristics**|||||||
|---|---|---|---|---|---|---|
|**Characteristic**<br>~~De~~||**Symbol**<br>~~De~~||**Typ**<br>~~De~~|**Max**<br>~~De~~|**Unit**<br>~~De~~|
|Thermal Resistance Junction to Soldering Point<br>~~De~~<br>~~ee~~||R JS<br>~~De~~<br>~~ee~~||~~De~~<br>~~ee~~|1.5<br>~~De~~<br>~~ee~~|C/W<br>~~De~~<br>~~ee~~|
|Thermal Resistance Junction to Ambient Air (Note 2)<br>~~ee~~||R JA<br>~~ee~~||75<br>~~ee~~|~~ee~~|C/W<br>~~ee~~|
|Thermal Resistance Junction to Ambient Air (Note 3)<br>~~ee~~<br>~~as~~||R JA<br>~~ee~~<br>~~as~~||65<br>~~ee~~<br>~~as~~|~~ee~~<br>~~as~~|C/W<br>~~ee~~<br>~~as~~|
|Thermal Resistance Junction to Ambient Air (Note 4)<br>~~as~~||R JA<br>~~as~~||45<br>~~as~~|~~as~~|C/W<br>~~as~~|
|Operating Temperature Range<br>~~as~~<br>~~Be~~||Tj<br>~~as~~<br>~~Be~~||~~as~~<br>~~Be~~|-65 to +150<br>~~as~~<br>~~Be~~|C<br>~~as~~<br>~~Be~~|
|Storage Temperature Range<br>~~Be~~||TSTG<br>~~Be~~||~~Be~~|-65 to +150<br>~~Be~~|C<br>~~Be~~|



Notes:       1.  RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see _EU Directive Annex Notes 5 and 7_ . 2.  FR-4 PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf. TA = 25 C 3.  Polymide PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf. TA = 25 C 

4.  Polymide PCB, 2 oz. Copper. Cathode pad dimensions 9.4 mm x 7.2 mm. Anode pad dimensions 2.7 mm x 1.6 mm. TA = 25 C 

DS30552 Rev. 6 - 2 

PDR5G 

1 of 3 

PowerDI is a trademark of Diodes Incorporated. **www.diodes.com** 

Diodes Incorporated 

**Electrical Characteristics** @ TA = 25 C unless otherwise specified 

**Characteristic Symbol Min Typ Max Unit Test Condition** ~~rs~~ Reverse Breakdown Voltage (Note 5) ~~rs~~ V(BR)R 400 ~~rs nn ns~~ V ~~de~~ IR = 10 A ~~rs~~ Forward Voltage ~~rs~~ VF ~~nner Qs~~ 0.92 1.15 V IF = 5A, TS = 25 C ~~ee~~ Reverse Leakage Current (Note 5) IR ~~aed~~ 0.029 25010 A TTSS =   25 = 125 C, VC, VRR = 400V  = 400V Reverse Recovery Time trr 3.3 s IIFrr = 0.5A, I = 0.25A R = 1.0A, ~~ee~~ eee ed eee ee 

Notes:       2.  FR-4 PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf. TA = 25 C 

3.  Polymide PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf. TA = 25 C 

4.  Polymide PCB, 2 oz. Copper. Cathode pad dimensions 9.4 mm x 7.2 mm. Anode pad dimensions 2.7 mm x 1.6 mm. TA = 25 C 

5.  Short duration test pulse used to minimize self-heating effect. 

6.  Polymide PCB, 2 oz. Copper.  Cathode pad dimensions 18.8mm x 14.4mm.  Anode pad dimensions 5.6mm x 3.0mm. 

**==> picture [506 x 493] intentionally omitted <==**

**----- Start of picture text -----**<br>
100 ee eee OO  ————<br>SSS SSS SSS ———<br>10 T  = +150°C<br>j<br>1 T  = +125°C<br>j<br>T  = 150°Cj<br>100m SSs7oe= eee T  = +85°C eee<br>j<br>fff fe SS<br>10m —___¥ {Fe T  = 85°Cj . 100n part ttEtt—<br>1m T  = 25°Cj<br>T  = +25°C<br>j<br>10n<br>= Sf fF a<br>T  = -65°Cj<br>T  = -65°C<br>j<br>tn LLA A 1n po<br>0 0.2 0.4 0.6 0.8 1.0 1.2 0 80 160 240 320 400<br>VF, INSTANTANEOUS FORWARD VOLTAGE (V)Fig. 1  Typical Forward Characteristics VR, INSTANTANEOUS REVERSE VOLTAGE (V)<br>Fig. 2  Typical Reverse Characteristics<br>100 | | | fj | 7.5 EEE<br>f = 1 MHz<br>6.0<br>75 “Tt EE<br>f |  .| fl | SESRSEeERnnneetiti TTT TTT<br>4.5<br>50 TTP PP PRN EEE EEE<br>Note 6<br>PAE 3.0 CTP<br>| fF ft | BEREERSSeREEaE<br>25<br>1.5 Note 2<br>| .<br>ee ee ee eS<br>LEA<br>0<br>0 ELLEELLE ENN EI<br>0 5 10 15 20 25 30<br>0 25 50 75 100 125 150 175<br>VR, REVERSE VOLTAGE (V) TA, AMBIENT TEMPERATURE (°C)<br>Fig. 3  Typical Total Capacitance vs. Reverse Voltage Fig. 4  DC Forward Current Derating<br>, INSTANTANEOUS FORWARD CURRENT (A) INSTANTANEOUS REVERSE CURRENT (A),<br>IF  IR<br>, TOTAL CAPACITANCE (pF)<br>T<br>C , DC FORWARD CURRENT (A)IF<br>**----- End of picture text -----**<br>


DS30552 Rev. 6 - 2 

PDR5G 

2 of 3 

PowerDI is a trademark of Diodes Incorporated. **www.diodes.com** 

**==> picture [497 x 338] intentionally omitted <==**

**----- Start of picture text -----**<br>
4 180<br>I PK TTT TTT TTT<br>IAV = 1 (DC) 150<br>3 cee GEER<br>120<br>COOP FE<br>2 90<br>60<br>1<br>30<br>0 PPLELLELELL =  EEE 0<br>0 1 2 3 4 5 0 100 200 300 400<br>IF, FORWARD CURRENT (A) VR, DC REVERSE VOLTAGE (V)<br>Fig. 5  Forward Power Dissipation Fig. 6  Operating Temperature Derating<br>Ordering Information (Note 7)<br>Device Packaging Shipping<br>PDR5G-13 PowerDI 5 5000/Tape & Reel<br>Notes: 7. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf.<br>, FORWARD POWER DISSIPATION (W)<br>F<br>P , DERATED AMBIENT TEMPERATURE (°C)<br>A<br>T<br>**----- End of picture text -----**<br>


## **Marking Information** 

**==> picture [224 x 55] intentionally omitted <==**

**----- Start of picture text -----**<br>
R5G R5G = Product type marking code<br>       = Manufacturers’ code marking<br>YYWW = Date code marking<br>  YY = Last two digits of year ex: 05 for 2005<br>  YYWWK   WW = Week code 01 to 52<br>  K = Factory Designator<br>**----- End of picture text -----**<br>


## IMPORTANT NOTICE 

Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. 

DS30552 Rev. 6 - 2 

PDR5G 

3 of 3 

PowerDI is a trademark of Diodes Incorporated. **www.diodes.com**