PDLF4000LB
Filter, EMI, Data Line, Surface Mount, 5 µH, PDLF Series, 100 mA, 7.8mm x 5.5mm x 3.5mm
- Manufacturer: COILCRAFT
- Product type: SMD Common Mode Chokes / Filters
- Inductance: 5µH
- Product Range: PDLF
- Product Width: 5.5mm
- Product Height: 3.5mm
- Product Length: 7.8mm
- DC Current Rating: 100mA
- Common Mode Filter Case: 7.8mm x 5.5mm x 3.5mm
| Delivery and price | |
|---|---|
| Units per pack | 5000 |
| Price | 1.25 € |
| Current stock | 200+ |
| Lead time | 7 days |
Document 491-1 ## **SMT Data Line EMI Filters – PDLF** - Available in 4, 3 and 2-line versions - See our CCDLF series for 10 and 8-line EMI filters - Exceptional common mode noise attenuation from 15 MHz to 300 MHz; passes signal line data below 300 MHz with minimal attenuation - DC current capacity of 500 or 100 mA. - Excellent electrical isolation (300 Vrms) **Designer’s Kit D303** contains four each of all values plus DLF and CCDLF filters **Core material** Ferrite **Terminations** RoHS compliant tin-silver-copper over tin over nickel over phos bronze. Other terminations available at additional cost. **Weight** 183 – 201 mg **Ambient temperature** –40°C to +85°C **Storage temperature** Component: –40°C to +85°C. Tape and reel packaging: –40°C to +80°C **Resistance to soldering heat** Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles **Moisture Sensitivity Level (MSL)** 1 (unlimited floor life at <30°C / 85% relative humidity) |||**Current**|**Inductance**|| |---|---|---|---|---| |**Part**||**max**2|**min**3|**DCR max**| |**number**1|**Lines**|**(mA)**|**(µH)**|**(mOhms)**| |PDLF4000L_|4|100|5|250| |PDLF4500L_|4|500|5|200| |PDLF3000L_|3|100|5|250| |PDLF3500L_|3|500|5|200| |PDLF2000L_|2|100|5|250| |PDLF2500L_|2|500|5|200| **Mean Time Between Failures (MTBF)** 26,315,789 hours **Packaging** 500/7″reel; 2000/13″ reel Plastic tape: 16 mm wide, 0.35 mm thick, 8 mm pocket spacing, 4.4 mm pocket depth **PCB washing** Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf ## 1. When ordering, please specify **packaging** code: | **PDLF4500LC** - **C** = 7″ machine ready reel. EIA-481 embossed plastic tape (500 parts per full reel). - **D** = 13″ machine ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). - **B** = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead. 2. Current rating is for each line. 3. Inductance is per winding, tested at 1 MHz. 4. Operating temperature range -40°C to +85°C. 5. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Document 491-1 Revised 04/01/14 **US** +1-847-639-6400 sales@coilcraft.com **UK** +44-1236-730595 sales@coilcraft-europe.com **Taiwan** +886-2-2264 3646 sales@coilcraft.com.tw **China** +86-21-6218 8074 sales@coilcraft.com.cn **Singapore** + 65-6484 8412 sales@coilcraft.com.sg © Coilcraft Inc. 2014 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 491-2 ## **Surface Mount Data Line EMI Filters** **==> picture [497 x 265] intentionally omitted <==** **----- Start of picture text -----**<br> Recommended PDLF4000, 4500 PDLF3000, 3500 PDLF2000, 2500<br>Notch indicates pin 1<br>Land Pattern 8 7 6 5 8 7 6 5 8 7 6 5<br>1<br>1 8 0.050 8<br>0.217 ±0.006 PDLF 1,27 [cen]<br>5,50 ±0,15 XXXXL<br>0.030<br>4 5 0,76 4 5 1 2 3 4 1 2 3 4 1 2 3 4<br>0.200 0.060<br>5,08 1,52<br>0.307 ±0.008<br>7,80 ±0,20<br>0.138 ±0.008<br>3,50 ±0,20<br>0.007/0,18<br>0.317 ±0.012<br>8,05 ±0,30<br>0.236* 0.0395*<br>6,00 1,00 0.012<br>4 5 0.020 0,305<br>0,50<br>0.050<br>1 8 1,27 [cen]<br>* Dimensions are typical 0.0982,50 Dimensions are in [inches ] mm<br>prior to applying solder<br>**----- End of picture text -----**<br> ## **Typical Response[*]** ## **Typical Impedance** **==> picture [504 x 170] intentionally omitted <==** **----- Start of picture text -----**<br> 0 10,000<br>Differential Mode<br>Common Mode<br>1000<br>10<br>100 Differential Mode<br>Common Mode<br>10<br>20<br>1.0<br>30 0.1<br>0.1 1 10 100 1000 1.0 10 100 1000<br>Frequency (MHz)<br>Frequency (MHz)<br>Attenuation (dB)<br>Impedance (Ohms)<br>**----- End of picture text -----**<br> - Measured on HP 8753D network analyzer. Ref: 50 Ohms. **==> picture [117 x 44] intentionally omitted <==** Document 491-2 Revised 04/01/14 **US** +1-847-639-6400 sales@coilcraft.com **UK** +44-1236-730595 sales@coilcraft-europe.com **Taiwan** +886-2-2264 3646 sales@coilcraft.com.tw **China** +86-21-6218 8074 sales@coilcraft.com.cn **Singapore** + 65-6484 8412 sales@coilcraft.com.sg © Coilcraft Inc. 2014 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.
Updated at February 9, 2023
Coilcraft is a globally recognized leader in the design and manufacture of high-performance magnetic components. Renowned for its engineering excellence, reliable delivery, and stringent quality standards, the company provides essential solutions for a wide array of demanding applications, including signal processing, RF, power management, and timing circuits. Our comprehensive portfolio of Coilcraft components is centered on their industry-leading inductor technologies. This encompasses a vast selection of high-efficiency power inductors designed to optimize modern power supply architectures, alongside precision RF inductors engineered to deliver exceptional stability and performance in high-frequency communications and wireless applications. To support complete electromagnetic compatibility and comprehensive circuit design, we also offer a variety of Coilcraft's specialized magnetic solutions. This includes robust common mode chokes and filters for effective EMC and RFI suppression, current sensing transformers, and a selection of inductor kits and assortments that provide design engineers with versatile options for rapid prototyping and development.
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →