PD60CNK18BPM5T

## **Photoelectrics, Fibre Optic Sensor Contrast Sensor Type PD 60 CNK 18 BP ..** 

- **Range: 18 mm ±2 mm** 

- **Microprocessor controlled and EEPROM parameter storage** 

- **Operational voltage 10 - 30 V DC** 

- **Output 100 mA, NPN and PNP** 

- **Light or dark switching selectable** 

- **Cable or M8 standard plug** 

- **IP65 protection** 

- **cUL and CE approved** 

- **Manual contrast set-up** 

**Product Descri tion p** 

**Product Descri tion Orderin Ke p g y PD60CNK18BPM5T** The PD60CNK18BP.. is a a Push-pull output that per- **Type** fibre optic amplifier made forms both a NPN and a PNP **Housing style** specifically for plastic fibres output, which are fully pro- **Housing size** to detect contrast. The sensor tected against short-circuit, **Housing material** is microprocessor-based and transients and wrong polar- **Not used** ~~|~~ features manual distance ity. The sensor is built in a **Plastic fibres** setup by keyboard. NO or strong 13 x 30 x 60 mm poly- **Sensing distance mm** NC (light or dark mode) outcarbonate housing for DIN-rail **Output type** put is select-able by wiring. mounting. **Output configuration** The sensor output is built as **Connection type Teach-in** 

## **T e Selection yp** 

**Housing Range W x H x D Sn** 13 x 30 x 60 mm 18 mm ±2 mm 

**Ordering no. Ordering no. NPN and PNP cable NPN and PNP plug PD 60 CNK 18 BP T PD 60 CNK 18 BP M5 T** 

## **Fibre** 

100 cm fibre w. M18 lens head **FPDK01SCC100** 

To be ordered separately. 

## **S ecifications p** 

|**Detection distance**|18 mm ±2 mm|
|---|---|
|**Temperature drift**|< 0,4%/°C|
|**Rated operational volt.**(UB)|10 to 30 VDC<br>(ripple included)|
|**Ripple**(Urpp )|≤ 10%|
|**Output current**<br>Continuous (Ie)|100 mA|
|Short-time(I)|100 mA|
|**No load supply current**(Io)<br>**Switching frequency**|50 mA<br>20 kHz|
|**Voltage drop**(Ud)||
|IL= 100 mA<br>IL= 10 mA|≤ 2 VDC<br>≤ 1 VDC|
|**Protection**|Short-circuit, reverse pola-|
||rity,transients|
|**Light source**|White LED|
|**Spot diameter**@18 mm|1.5 mm(FPDK01SCC100)|
|**Modulation frequency**<br>**Ambient light**<br>Incandescent light|40 kHz<br>10’000 Lux|



|Sunlight|20’000 Lux|
|---|---|
|**Response time**||
|OFF-ON (tON)|≤ 25μs|
|ON-OFF(tOFF)|≤ 25μs|
|**Power ON delay **(tv)|≤ 300 ms|
|**Output function**||
|NPN and PNP|Available(Push-Pull output)|
|**Indication function**||
|Insufficient contrast|Both green LED and red key|
||flash for 2 s|
|Short-circuit  output|Both green LED and red key|
||flash continuously|
|**Environment**||
|Installation category|II (IEC 60664/60664A;60947-1)|
|Pollution degree|3 (IEC 60664/60664A;60947-1)|
|Degree ofprotection|IP 65(IEC 60529;60947-1)|
|**Temperature**||
|Operating|0°to +40°C (32° to +104°F)|
|Storage|-20° to +80°C(-4° to +176°F)|
|**Vibration**|10 to 150 Hz, 0.5 mm/7.5 g|
||(IEC60068-2-6)|



**1** 

Specifications are subject to change without notice (13.09.2010) 

**PD60CNK18 BP..** 

## **Specifications (cont.)** 

|**Shock**|2 x 1 m & 100 x 0.5 m<br>(IEC 60068-2-6,60068-2-32)|
|---|---|
|**Rated insulation voltage**<br>**Housing material**<br>Body<br>**Connection**|50 VAC(rms)<br>Polycarbonate|
|Cable|PVC, black, 2 m, 4 x 0.25 mm2|
|Plug|NPB, M8 x 1|
|Cable forplug (M5)|CONB5A-series|
|**Weight**<br>**Approvals**<br>**CE-marking**|24g<br>cUL<br>Yes|



**==> picture [72 x 72] intentionally omitted <==**

## **Pro rammin Function g g** 

|**Teach-in**<br> Colour 1|Press|for 4 sec.<br>**SET**|for 4 sec.<br>**SET**|
|---|---|---|---|
||1st colour has now been|||
||learned|||
||Triangle|LED goes ON||
|Colour 2|Press|<br>**SET**|for 4|
|sec.||||
||2nd colour has now been|||
||learned|||
||Triangle|LED goes OFF||
|Output can be inverted by||||
|teaching colour 2 first||||



## **Dimensions** 

**==> picture [244 x 209] intentionally omitted <==**

**----- Start of picture text -----**<br>
20 25.4 ¯ 4.1<br>60<br>2 4<br>1 3<br>30 M8x1<br>13 SET<br>**----- End of picture text -----**<br>


## **Wiring Diagram** 

**==> picture [244 x 172] intentionally omitted <==**

**----- Start of picture text -----**<br>
1 BN<br>NPN<br>Micro- 4 BK<br>processor<br>PNP<br>3 BU<br>2 WH   Not used<br>**----- End of picture text -----**<br>


**==> picture [245 x 210] intentionally omitted <==**

**----- Start of picture text -----**<br>
20 25.4 ¯ 4.1<br>60 200<br>30<br>13 SET<br>**----- End of picture text -----**<br>


## **Ke board and LED y** 

**==> picture [239 x 172] intentionally omitted <==**

**----- Start of picture text -----**<br>
Press for 4 secs:<br>1st colour is learned, and triangle LED goes ON<br>Press for 4 secs again:<br>2nd colour is learned, and triangle LED goes OFF<br>Key LED, goes on<br>when a key is hit<br>*  Insufficient contrast:<br> both green LED and<br>Triangle LED<br> red key flash for 2 s<br>Detection of the lightest<br>*  Short-circuit output:  colour<br> both green LED and red<br> key flash continuously<br>SET<br>**----- End of picture text -----**<br>


**2** 

Specifications are subject to change without notice (13.09.2010) 

**PD60CNK18 BP..** 

## **Installation Hints** 

**==> picture [436 x 107] intentionally omitted <==**

**----- Start of picture text -----**<br>
To avoid interference from inductive voltage/  Relief of cable strain Protection of the sensing face  Switch mounted on mobile carrier<br>current peaks, separate the prox. switch<br>power cables from any other power cables,<br>e.g. motor, contactor or solenoid cables<br>Incorrect<br>Correct<br>The cable should not be pulled A proximity switch should not serve as  Any repetitive flexing of the<br>es mechanical stop cable should be avoided<br>**----- End of picture text -----**<br>


## **Deliver Contents y** 

- Photoelectric switch: PD60CNK18BP.. 

## **Accessories** 

• Plastic fibre type FPDK01SCC100 

- Installation instruction 

- **Packaging:** Cardboard box 

**Ø 8 M18 x 100 39   ,3 100 57   ,5** ~~a —s~~ 

**3** 

Specifications are subject to change without notice (13.09.2010)