PD30CNT15PMU

## **Photoelectrics Through-beam Type PD30CNT15....MU/RT** 

- **Miniature sensor range** 

- **Range: 15 m** 

- **Sensitivity adjustment by Teach-In programming** 

- **Modulated, Infraredred light 880 nm** 

- **Supply voltage: 10 to 30 VDC** 

- **Output: 100 mA, NPN or PNP preset** 

- **Make and break switching function programmable** 

- **LED indication for output, stability and power ON** 

- **Protection: reverse polarity, short circuit and transients** 

- **Cable and plug versions** 

- **Excellent EMC performance** 

- **Mute function (Sensor blanking) Emitter** 

- **Remote teach - Receiver** 

**Product Descri tion Orderin Ke p g y PD30CNT15NPM5RT** The PD30CNT15 sensor The Teach-In function for **Type** family comes in a compact adjustment of the sensitivi- **Housing style** 10 x 30 x 20 mm reinforced ty makes the sensors highly **Housing size** PMMA/ABS housing. flexible. The output type is **Housing material** The sensors are useful in preset (NPN or PNP), and the **Housing length** applications where high-acoutput switching function is **Detection principle** OS curacy detection as well as programmable (NO or NC). **Sensing distance** ~~=)~~ small size is required. The mute function can be **Output type** Compact housing and high used for testing the sensor **Output configuration** power LED for excellent perfor: Malfunctioning, discon- **Connection type** formance-size ratio. nection, optical axis adjust- **Remote teach** ment, dusty and dirty lenses. **T e Selection yp Housing Range Connection Ordering no. Ordering no. Ordering no. Ordering no. W x H x D Sn NPN NPN PNP PNP Emitter Make or break switching Emitter Make or break switching** 

10 x 30 x 20 mm 15 m Cable **PD 30 CNT 15 NMU PD 30 CNT 15 NPRT PD 30 CNT 15 PMU PD 30 CNT 15 PPRT** 10 x 30 x 20 mm 15 m Plug **PD 30 CNT 15 NM5MU PD 30 CNT 15 NPM5RT PD 30 CNT 15 PM5MU PD 30 CNT 15 PPM5RT Note:** Emitter, Receiver and Connector to be ordered separately. 

## **S ecifications Emitter** EN 60947-5-2 **p** 

|**Rated operational volt.**(UB)|10 to 30 VDC|
|---|---|
|**Ripple**(Urpp)|≤ 10%|
|**Supply current**|≤ 25 mA|
|**Light Source**<br>**Optical angle**<br>**Light type **<br>**Light spot**|GaAIAs,LED,880 nm<br>± 2º at ½ range<br>Infrared,modulated<br>110 mm @ 1.5 m|



|**Protection**|||Reversepolarity,transients|
|---|---|---|---|
|**Indication function**||||
|Power supplyON|ON||LED, green|
|**Mute function**||||
|Emitter off|0 to 3 sec|0 to 3 sec|0 to 2.5 VDC (NPN)|
||||5 to 30 VDC (PNP)|
|Emitter half power||> 3 sec|0 to 2.5 VDC (NPN)|
||||5 to 30 VDC (PNP)|



## **S ecifications Receiver** EN 60947-5-2 **p** 

|**Rated operating distance**(Sn) 15 m, with PD30CNT15|) 15 m, with PD30CNT15|
|---|---|
||Emitter|
|**Blind zone**<br>**Sensitivity**|None<br>Adjustable by Teach-In<br>(push button or wire)|
|**Temperature drift**|≤ 0.3%/ºC|
|**Hysteresis**(H)||
|(differential travel)|≤ 10%|
|**Rated operational volt.**(UB)|10 to 30 VDC|
|**Ripple**(Urpp)|≤ 10%|



|**Adjustable range**|1.5 m to 15 m|
|---|---|
|resolution|3% on distance|
|**Output current**||
|Continuous (Ie)|≤ 100 mA|
|Short-time (I)|≤ 100 mA|
||(max. load capacity100 nF)|
|**No load supply current**(Io)|≤ 30 mA|
|**Minimum operational current**(Im)|0.5 mA|
|**OFF-state current**(Ir)|≤ 100µA|
|**Voltage drop**(Ud)|≤ 2.5 VDC @ 100 mA|



**1** 

Specifications are subject to change without notice (10.02.2017) 

**PD30CNT15....MU/RT** 

**PD30CNT15....MU/RT** 

**==> picture [72 x 40] intentionally omitted <==**

## **General S ecifications** EN 60947-5-2 **p** 

## **Specifications Receiver (cont.)** EN 60947-5-2 

|**Protection**<br>Short-circuit, reverse polarity<br>and transients<br>**Sensing angle**<br>± 4º<br>**Ambient light**<br>10,000 lux<br>**Operating frequency**<br>1000 Hz<br>**Response time**<br>OFF-ON (tON)<br>≤ 0.5 ms<br>ON-OFF(tOFF)<br>≤ 0.5 ms<br>**Power ON delay **(tv)<br>≤ 300 ms<br>**Output function**<br>NPN and PNP<br>Preset<br>NO/NC switchingfunction<br>Set upbybutton<br>**Remote teach**<br>“Push button active”<br>0 to 2.5 VDC (NPN)<br>5 to 30 VDC (PNP)<br>Tamper proof<br>When activated more than<br>20 sec. the sensor goes into<br>a Tamperproof mode.<br>**Indication**<br>Output ON<br>LED, yellow<br> Signal stability ON and power ONLED, green|**Environment**<br>Installation category<br>III (IEC 60664/60664A;<br>60947-1)<br>Pollution degree<br>3 (IEC 60664/60664A;<br>60947-1)<br>Degree ofprotection<br>IP 67(IEC 60529;60947-1)<br>**Ambient temperature**<br>Operating<br>-25°to +55°C (-13°to +131°F)<br>Storage<br>-40°to +70°C(-40°to +158°F)<br>**Vibration**<br>10 to 55 Hz, 0.5 mm/7.5 g<br>(IEC 60068-2-6)<br>**Shock**<br>30 g / 11ms, 3 pos, 3 neg<br>per axis<br>(IEC 60068-2-6,60068-2-32)<br>**Rated insulation voltage**<br>500 VAC(rms)<br>**Housing material**<br>Body<br>ABS<br>Front material<br>PMMA,red<br>**Connection**<br>Cable<br>Emitter/receiver<br>PVC, black, 2 m, Ø = 3.3 mm<br>4 x 0.14 mm2<br>Plug<br>M8,4-pin(CON,54-series)<br>**Weight**(each sensor)<br>With cable: 40 g<br>Withplug:  10g<br>**CE-marking**<br>Yes<br>**Approvals**<br>cULus (UL508)|
|---|---|



## **O eration Dia ram p g** 

tv = Power ON delay 

**==> picture [483 x 115] intentionally omitted <==**

**----- Start of picture text -----**<br>
ON<br>Power supply OFF<br>Present<br>Object Not Present<br>ON T < 3 sec. T > 3 sec.<br>Mute (Emitter) OFF<br>100%<br>Emitted power 50%0%<br>Dirty<br>Optics Clean<br>ON Tv<br>Make Output (N.O.) OFF<br>ON Tv<br>Break Output (N.C.)  OFF<br>**----- End of picture text -----**<br>


## **Wiring Diagrams** 

**==> picture [500 x 161] intentionally omitted <==**

**----- Start of picture text -----**<br>
Receiver Emitter<br>NPN PNP NPN PNP<br>1 BN V 1 BN V 1 BN V 1 BN V<br>2 WH 4 BK Mute 2 WH<br>Teach<br>4 BK Teach 2 WH Mute 2 WH<br>3 BU 3 BU 3 BU 3 BU<br>V V V V<br>Teach input active when  Teach input active when  Mute input active when  Mute input active when<br>connected to GND connected to V+ connected to GND connected to V+<br>**----- End of picture text -----**<br>


**==> picture [72 x 72] intentionally omitted <==**

## **Excess Gain** 

## **Detection Diagram** 

**==> picture [500 x 161] intentionally omitted <==**

**----- Start of picture text -----**<br>
Emitter<br>X Y<br>Receiver (feet)<br>16.5 33 49.5 66<br>400 16 1000<br>300 12<br>200 8<br>100<br>100 4<br>0 0<br>10<br>-100 -4<br>-200 -8<br>-300 -12 1<br>1.0 10.0 100.0<br>-400 -16 Distance (m)<br>0 5 10 15 20<br>Sensing range (m)<br>(mm) (inch) Excess Gain<br>**----- End of picture text -----**<br>


## **Si nal Stabilit Indication g y** 

## **Accessories** 

**==> picture [500 x 161] intentionally omitted <==**

**----- Start of picture text -----**<br>
21.2<br>14<br>9° 1.2 32.4<br>Excess Gain 25.4<br>3.2 1.2<br>1.25 Operation level x 1.25<br>1.0 Operation level<br>0.75 Operation level x 0.75<br>13.5 16.2<br>5.7 6.0 6.0 5.2<br>Time<br>Green LED ON<br>Yellow LED ON<br>4.4 4.4<br>Mounting bracket: APD30-MB1 Mounting bracket: APD30-MB2<br>25.4 9°<br>39<br>3.2 26,3 29.3<br>10<br>7.3 10 8.2 4.4<br>16 3 14<br>**----- End of picture text -----**<br>


## **Dimensions** 

**==> picture [500 x 232] intentionally omitted <==**

**----- Start of picture text -----**<br>
Cable version Plug version<br>Teach Button* Teach Button*<br>Output LED Power / Stability LED Output LED Power / Stability LED<br>Yellow*  Green Yellow*  Green<br>10.6 10.6<br>10.8 10.8<br>17 17<br>Receiver or emitter Two, 9.5 dia. Receiver or emitter Two, 9.5 dia.<br>Lenses Lenses<br>Optical axis Optical axis<br>Two M3 Two M3<br>10.25<br>* Not avaible on emitter version<br>10.6 6 10.6 6<br>20 20<br>1.1 1.1<br>5.5 5.5<br>30 25.4 22 30 25.4 22<br>5.5 5.5<br>15 15<br>**----- End of picture text -----**<br>


**2** 

**3** 

Specifications are subject to change without notice (10.02.2017) 

Specifications are subject to change without notice (10.02.2017) 

**PD30CNT15....MU/RT** 

**PD30CNT15....MU/RT** 

**==> picture [72 x 72] intentionally omitted <==**

## **Installation Hints** 

**==> picture [500 x 118] intentionally omitted <==**

**----- Start of picture text -----**<br>
To avoid interference from inductive voltage / Relief of the cable strain Protection of the sensing face Sensor mounted on a mobile carrier<br>current peaks, separate the proximity switch<br>cables from any other power cables. E.g.<br>Engine, contactor or solenoid cables<br>Incorrect<br>Incorrect<br>Incorrect Correct<br>Correct<br>> 100 mm<br>A proximity switch should not serve Any repetitive flexing of the<br>The cable should not be pulled as mechanical stop cable should be avoided<br>**----- End of picture text -----**<br>


## **Deliver Contents y** 

## **Accessories** 

- Photoelectric switch: PD 30 CNT 15 ... 

   - Mounting bracket APD30-2 to be purchased separately 

   - Connector type CONG 5A../CON. 54NF.. series. 

- Installation instruction 

- Mountingbracket APD30-1 

- **Packaging:** Cardboard box 

## **Teach functions** 

**Normal operation, optimized switching point** 

1. Line up the emitter and receiver. Yellow LED and Green LED are ON. 

2. Press the button for 3 seconds until both LEDs 

   - flashes simultaneously. (The first switch point is stored) 

3. Place the object between the emitter and receiver in the detection zone. 

4. Press the button once and the sensor is ready to operate (Green LED ON, Yellow LED ON) (The second switch point is stored) 

**==> picture [244 x 93] intentionally omitted <==**

**----- Start of picture text -----**<br>
1 2 3 4<br>3 sec. Push once<br>**----- End of picture text -----**<br>


## **For maximum sensing distance** 

## **(default setting)** 

1. Line up the emitter and receiver, place the object between the emitter and receiver in the detection zone. Yellow LED is OFF and Green LED is ON. 

2. Press the button for 3 seconds until both LEDs 

   - flashes simultaneously. 

   - (The first switch point is stored) 

**==> picture [72 x 72] intentionally omitted <==**

## **For dynamic set-up (running process)** 

1. Line up the emitter and receiver. Green LED is ON, status on the yellow LED is not important. 

2. Press the button for 3 second until both LEDs flashes simultaneously. 

   - (The first switch point is stored) 

3. Press the button a second time and keep the button pressed for at least one process cycle, release the button and the sensor is ready to operate (The second switch point is stored) 

**==> picture [165 x 81] intentionally omitted <==**

**----- Start of picture text -----**<br>
1 2 3<br>3 sec. Push once<br>**----- End of picture text -----**<br>


**==> picture [38 x 54] intentionally omitted <==**

## **For make or break set-up** 

   1. Press the button for 10 seconds, until the green LEDs flashes. 

   2. While the green LED flashes, the output is inverted each time the button is pressed. Yellow LED indicates N.O. function selected. 

      - If the button is not pressed within the next 10 seconds, the current output is stored. 

3. Press the button a second time and the sensor is 

**==> picture [364 x 111] intentionally omitted <==**

**----- Start of picture text -----**<br>
ready to operate (Green LED ON, Yellow LED ON) 1 2<br>1 2 3<br>10 sec. Push once<br>3 sec. Push once<br>**----- End of picture text -----**<br>


- ready to operate (Green LED ON, Yellow LED ON) (The second switch point is stored) 

**==> picture [32 x 42] intentionally omitted <==**

## **For minimum sensing distance** 

## **(Transparent or semi-transparent objects)** 

1. Line up the emitter and receiver. Yellow LED and Green LED are ON. 

2. Press the button for 3 seconds until both LEDs flashes simultaneously. 

   - (The first switch point is stored) 

3. Press the button a second time and the sensor is ready to operate (Green LED ON, Yellow LED ON) (The second switch point is stored) 

**==> picture [37 x 44] intentionally omitted <==**

**==> picture [165 x 81] intentionally omitted <==**

**----- Start of picture text -----**<br>
1 2 3<br>3 sec. Push once<br>**----- End of picture text -----**<br>


**4** 

**5** 

Specifications are subject to change without notice (10.02.2017) 

Specifications are subject to change without notice (10.02.2017)