PD30CNT15NAM5SA

## **Photoelectrics Through-beam Type PD30CNT15....SA** 

- **Miniature sensor range** 

- **Range: 15 m** 

- **Sensitivity adjustment by potentiometer** 

- **Modulated, infrared light 850 nm** 

- **Supply voltage: 10 to 30 VDC** 

- **Output: 100 mA, NPN or PNP preset** 

- **Make and break switching function** 

- **LED indication for output, stability and power ON** 

- **Protection: Short-circuit, reverse polarity and transients** 

- **Cable and plug versions** 

- **Excellent EMC performance** 

## **Product Descri tion p** 

The PD30CNT15 sensor family comes in a compact 10 x 30 x 20 mm reinforced PMMA/ABS housing. 

The potentiometer function for adjustment of the sensitivity makes the sensors highly flexible. The output type is preset (NPN or PNP), and the output switching function is NO and NC output. 

The sensors are useful in applications where high-accuracy detection as well as small size is required. Compact housing and high power LED for excellent performance-size ratio. 

## **Orderin Ke g y PD30CNT15NAM5SA** 

**Type Housing style Housing size Housing material Housing length Detection principle Sensing distance Output type Output configuration Connection type Sensitivity adjustment** 

## **T e Selection yp** 

**Housing Range Connection Ordering no. Ordering no. Ordering no. W x H x D Sn Emitter NPN PNP Make and break switching Make and break switching** 10 x 30 x 20 mm 15 m Cable **PD 30 CNT 15 PD 30 CNT 15 NASA PD 30 CNT 15 PASA** 10 x 30 x 20 mm 15 m Plug **PD 30 CNT 15 M5 PD 30 CNT 15 NAM5SA PD 30 CNT 15 PAM5SA** 

**Note:** Emitter, receiver and connector to be ordered separately 

## **S** EN 60947-5-2 **pecifications Receiver** 

|**Rated operating distance**(Sn)|)|
|---|---|
|PD30CNT emitter|≤ 15 m|
|**Adjustment range**|3 to 15 m|
|**Blind zone**||
|PD30CNT emitter|None|
|**Sensitivity**<br>Electrical adjustment<br> Mechanical adjustment<br>**Temperature drift**<br>**Hysteresis**(H)<br>**Rated operational volt.**(UB)<br>**Ripple**(Urpp)<br>**Output current**<br>Continuous (Ie)<br>Short-time (I)<br>**No load supply current**(Io)|210˚<br>240˚<br>≤ 0.2%/ºC<br>5% to 20%<br>10 to 30 VDC<br>(ripple included)<br>≤ 10%<br>≤ 100 mA<br>≤ 100 mA<br>(max. load capacity100 nF)<br>≤ 20 mA @ UBmax|
|**Minimum operational current**(Im)|≤ 0.5 mA|



|**OFF-state current**(Ir)|≤ 100µA|
|---|---|
|**Voltage drop **(Ud)|≤ 2 VDC @ Iemax|
|**Protection**|Short-circuit, reverse polarity|
||and transients|
|**Ambient light**|≤ 10,000 lux|
|**Operating frequency **(f)|≤ 500 Hz|
|**Response time**||
|OFF-ON (tON)|≤ 1 ms|
|ON-OFF(tOFF)|≤ 1 ms|
|**Power ON delay **(tv)|≤ 200 ms|
|**Output  function**||
|Open collector|NPN or PNP bysensor type|
|**Output switching function**|N.O. and N.C.|
|**Indication**||
|Output ON|LED, yellow|
||Signal stability ON and|
|Power ON|LED, green. See curve for|
||condition of stability|



Specifications are subject to change without notice (13.06.2016) 

**1** 

**PD30CNT15....SA** 

## **S** EN 60947-5-2 **pecifications Emitter** 

|**Rated operational volt.**(UB)|10 to 30 VDC|
|---|---|
||(ripple included)|
|**Ripple**(Urpp)|≤ 10%|
|**No load supply current**(Io)|≤ 25 mA @ UBmax|
|**Light source**|LED,850 nm|
|**Light type**|Infrared,modulated|
|**Emitter angle**|± 2º @ half sensing|
||distance|



**==> picture [72 x 72] intentionally omitted <==**

**Light spot** 110 mm @ 1.5 meters distance **Power ON delay** (tv) ≤ 200 ms **Protection** Reverse polarity and transients **Indication** Power ON LED, green 

## **General S** EN 60947-5-2 **pecifications** 

|**Environment**|||
|---|---|---|
|Installation category|III (IEC 60664/60664A;||
||60947-1)||
|Pollution degree|3 (IEC 60664/60664A;||
||60947-1)||
|Degree ofprotection|IP 67(IEC 60529;60947-1)||
|**Ambient temperature**|||
|Operating|-25°to +60°C (-13°to +140°F)||
|Storage<br>**Vibration**|-40°to +70°C(-40°to +158°F)<br>10 to 150 Hz, 1.0 mm/15 G<br>(IEC 60068-2-6)||
|**Shock**|30 g / 11ms, 3 pos, 3 neg<br>per axis<br>(IEC 60068-2-6,60068-2-32)||
|**Rated insulation voltage**|≤ 500 VAC (rms)||



**Housing material** Body ABS Light Grey Frontglas PMMA Red Trimmer shaft POM Dark Grey **Connection** Cable PVC, black, 2 m 4 x 0.14 mm[2] , Ø = 3.3 mm Plug M8, 4-pin (CON. 54-series) **Weight** Cable version ≤ 50 g Plug version ≤ 20 g **CE-marking** Yes **Approvals** cULus (UL508 + CSA) 

## **O eration Dia ram p g** 

Tv = Power ON delay 

**==> picture [495 x 66] intentionally omitted <==**

**----- Start of picture text -----**<br>
ON<br>Power supply OFF<br>Present<br>Target Not Present<br>ON Tv<br>Break Output (N.C.) OFF<br>ON Tv<br>Make Output (N.O.)  OFF<br>**----- End of picture text -----**<br>


## **Si nal Stabilit Indication g y** 

**==> picture [244 x 191] intentionally omitted <==**

**----- Start of picture text -----**<br>
Excess Gain<br>1.25 Operation level x 1.25<br>1.0 Operation level<br>0.75 Operation level x 0.75<br>Time<br>Green LED ON<br>Yellow LED ON<br>**----- End of picture text -----**<br>


## **Wiring Diagrams** 

**==> picture [245 x 191] intentionally omitted <==**

**----- Start of picture text -----**<br>
1BN<br>NPN<br>2WH<br>4BK<br>3BU<br>1BN<br>PNP<br>4BK<br>2WH<br>3BU<br>**----- End of picture text -----**<br>


Specifications are subject to change without notice (13.06.2016) 

**2** 

**PD30CNT15....SA** 

## **Detection Diagram** 

## **Excess Gain** 

**==> picture [72 x 72] intentionally omitted <==**

**==> picture [502 x 430] intentionally omitted <==**

**----- Start of picture text -----**<br>
Emitter<br>X Y Distance (Feet)<br>Receiver Distance (Inches)  0,6  6,0  60,0<br>0,0 3,0 6,0 9,0 12,0 15,0 18,0 21,0 24,0 10.000  10.000<br>500 19,7<br>400 15,7<br>1.000  1.000<br>300 11,8<br>200 7,9<br>100 3,9 100  100<br>0 0,0<br>-100 -3,9<br>10  10<br>-200 -7,9<br>-300 -11,8<br>-400 -15,7 1  1<br>-500 -19,7 0,20 2,00 20,00<br>0 5 10 15 20 25 Distance (m)<br>Distance (m)<br>Dimensions<br>Cable version Plug version<br>Output LED Power / Stability LED Output LED Power / Stability LED<br>Yellow  Green Yellow  Green<br>10.6 10.6<br>17 10.8 Potentiometer 17 10.8 Potentiometer<br>Receiver or emitter One, 9.5 dia. Receiver or emitter One, 9.5 dia.<br>Lense Lense<br>Optical axis Optical axis<br>Two M3 Two M3<br>10.25<br>(mm)<br>(Inches) Excess Gain<br>10.6 10.6<br>20 20<br>1.1 1.1<br>7 7<br>5.5 5.5<br>30 25.4 22 30 25.4 22<br>5.5 5.5<br>15 15<br>**----- End of picture text -----**<br>


## **Installation Hints** 

**==> picture [500 x 119] intentionally omitted <==**

**----- Start of picture text -----**<br>
To avoid interference from inductive voltage / Relief of the cable strain Protection of the sensing face Sensor mounted on a mobile carrier<br>current peaks, separate the proximity switch<br>cables from any other power cables. E.g.<br>Engine, contactor or solenoid cables<br>Incorrect<br>Incorrect<br>Incorrect Correct<br>Correct<br>> 100 mm<br>A proximity switch should not serve Any repetitive flexing of the<br>The cable should not be pulled as mechanical stop cable should be avoided<br>**----- End of picture text -----**<br>


## **Accessories** 

- Mounting bracket APD30-MB1 or APD30-MB2 to be 

- purchased separately. 

## **Deliver Contents y** 

- Photoelectric switch: PD30CNT15 ... 

- Screwdriver (Receiver only) 

- **Packaging:** Plastic bag 

Specifications are subject to change without notice (13.06.2016) 

**3**