PD30CNR60NASA

## **Photoelectrics Retro-reflective Type PD30CNR60....SA** 

- **Miniature sensor range** 

- **Range: 6 m** 

- **Sensitivity adjustment by Potentiometer** 

- **Modulated, infrared light 850 nm** 

- **Supply voltage: 10 to 30 VDC** 

- **Output: 100 mA, NPN or PNP preset** 

- **Make and break switching function** 

- **LED indication for output, stability and power ON** 

- **Protection: reverse polarity, short circuit and transients** 

- **Cable and plug versions** 

- **Excellent EMC performance** 

## **Product Descri tion p** 

The PD30CNR60 sensor The Potentiometer function family comes in a compact for adjustment of the 10 x 30 x 20 mm reinforced sensitivity makes the PMMA/ABS housing. sensors highly flexible. The The sensors are useful in output type is preset (NPN applications where highor PNP), and the output accuracy detection as well switching function is NO as small size is required. and NC output. Compact housing and high power LED for excellent performance-size ratio. 

## **Orderin Ke g y** 

**Type Housing style Housing size Housing material Housing length Detection principle Sensing distance Output type Output configuration Connection type Sensitivity adjustment** 

**PD30CNR60NAM5SA** 

## **T e Selection yp** 

|**Housing**|**Range**|**Connection**|
|---|---|---|
|**W x H x D**|**Sn**||
|10 x 30 x 20 mm|6 m|Cable|
|10 x 30 x 20 mm|6 m|Plug|



**Ordering no. Ordering no. NPN PNP Make and break switching Make and break switching PD 30 CNR 60 NASA PD 30 CNR 60 PASA PD 30 CNR 60 NAM5SA PD 30 CNR 60 PAM5SA** 

## **S** EN 60947-5-2 **pecifications** 

|**Rated operating distance**(Sn)<br>Ø 80 mm (ER4) reflector<br>ER4060 reflector|)<br>≤ 6 m<br>≤ 4 m|
|---|---|
|**Blind zone**<br>**Sensitivity**<br>Electrical adjustment<br> Mechanical adjustment|≤ 100 mm @ Ø80 mm (ER4)<br>and ER4060 reflector<br>210˚<br>240˚|
|**Temperature drift**|≤ 0.2%/ºC|
|**Hysteresis**(H)|5% to 20%|
|**Rated operational volt.**(UB)<br>**Ripple**(Urpp)<br>**Output current**|10 to 30 VDC<br>(ripple included)<br>≤ 10%|
|Continuous (Ie)|≤ 100 mA|
|Short-time (I)|≤ 100 mA|
||(max. load capacity100 nF)|
|**No load supply current**(Io)<br>**Minimum operational current**(Im)≤ 0.5 mA<br>**OFF-state current**(Ir)<br>**Voltage drop**(Ud)|≤ 20 mA @ UBmax<br>≤ 0.5 mA<br>≤ 100µA<br>≤ 2 VDC @ Iemax|



|**Protection**|Short-circuit, reverse polarity|
|---|---|
||and transients|
|**Light source**|LED,850 nm|
|**Light type**|Infrared,modulated|
|**Emitter angle**|± 2º @ half sensing|
||distance|
|**Light spot**|110 mm @ 1.5 meters|
|**Ambient light**|≤ 10,000 lux|
|**Operating frequency **(f)|≤ 1000 Hz|
|**Response time**||
|OFF-ON (tON)|≤ 0.5 ms|
|ON-OFF(tOFF)|≤ 0.5 ms|
|**Power ON delay **(tv)|≤ 30 ms|
|**Output  function**||
|Open collector|NPN or PNP bysensor type|
|**Output switching function**|N.O. and N.C.|
|**Indication**||
|Output ON|LED, yellow|
||Signal stability ON and|
|Power ON|LED, green. See curve for|
||condition of stability|



Specifications are subject to change without notice (27.10.2022) 

**1** 

**PD30CNR060...SA** 

## **Specifications (cont.)** 

|**Environment**||
|---|---|
|Installation category|III (IEC 60664/60664A;|
||60947-1)|
|Pollution degree|3 (IEC 60664/60664A;|
||60947-1)|
|Degree ofprotection|IP 67(IEC 60529;60947-1)|
|**Ambient temperature**||
|Operating|-25°to +60°C (-13°to +140°F)|
|Storage|-40°to +70°C(-40°to +158°F)|
|**Vibration**|10 to 150 Hz, 1.0 mm/15 G|
||(IEC 60068-2-6)|
|**Shock**|30 g / 11ms, 3 pos, 3 neg|
|**Rated insulation voltage**|per axis<br>(IEC 60068-2-6,60068-2-32)<br>≤ 500 VAC (rms)*|



**==> picture [72 x 72] intentionally omitted <==**

|**Housing material**||
|---|---|
|Body|ABS Light Grey|
|Frontglas|PMMA Red|
|Trimmer shaft|POM Dark Grey|
|**Connection**||
|Cable|PVC, black, 2 m|
||4 x 0.14 mm2, Ø = 3.3 mm|
|Plug|M8, 4-pin (CON.54NF..|
||series)|
|**Weight**||
|Cable version|≤ 50 g|
|Plugversion|≤ 20g|
|**CE-marking**|Yes|
|**Approvals**|cULus (UL508 + CSA)|



## **O eration Dia ram p g** 

Tv = Power ON delay 

**==> picture [495 x 65] intentionally omitted <==**

**----- Start of picture text -----**<br>
ON<br>Power supply OFF<br>Present<br>Target Not Present<br>ON Tv<br>Break Output (N.C.) OFF<br>ON Tv<br>Make Output (N.O.)  OFF<br>**----- End of picture text -----**<br>


## **Si nal Stabilit Indication g y** 

## **Wiring Diagrams** 

**==> picture [500 x 192] intentionally omitted <==**

**----- Start of picture text -----**<br>
1BN<br>NPN<br>Excess Gain 2WH<br>4BK<br>1.10 Operation level x 1.10<br>1.0 Operation level 3BU<br>0.90 Operation level x 0.90<br>1BN<br>PNP<br>Time 4BK<br>Green LED ON<br>Yellow LED ON 2WH<br>3BU<br>**----- End of picture text -----**<br>


Specifications are subject to change without notice (27.10.2022) 

**2** 

**PD30CNR60....SA** 

## **Detection Diagram** 

**==> picture [244 x 185] intentionally omitted <==**

**----- Start of picture text -----**<br>
Sensor<br>Y<br>X ER4<br>Reflector Distance (Feet)<br>0,0 3,2 6,6 9,8 13,1 16,4 19,7 23,0 26,2<br>300 11,8<br>200 7,9<br>100 3,9<br>0 0,0<br>-100 -3,9<br>-200 -7,9<br>-300 -11,8<br>0 1 2 3 4 5 6 7 8<br>Distance (m)<br>(mm)<br>(Inches)<br>**----- End of picture text -----**<br>


**==> picture [72 x 72] intentionally omitted <==**

## **Excess Gain** 

**==> picture [244 x 185] intentionally omitted <==**

**----- Start of picture text -----**<br>
Distance (Feet)<br> 0,3  3,2  32,8<br>10  10<br>1  1<br>0,1 1,0 10,0<br>Distance (m)<br>Excess Gain<br>**----- End of picture text -----**<br>


## **Dimensions** 

**==> picture [499 x 202] intentionally omitted <==**

**----- Start of picture text -----**<br>
Cable version Plug version<br>Output LED Power / Stability LED Output LED Power / Stability LED<br>Yellow  Green Yellow  Green<br>10.6 10.6<br>17 10.8 Potentiometer 17 10.8 Potentiometer<br>Receiver Two, 9.5 dia. Receiver Two, 9.5 dia.<br>Lenses Lenses<br>Optical axis Optical axis<br>Two M3 Emitter Two M3 Emitter<br>10.25<br>10.6 10.6<br>20 20<br>1.1 1.1<br>7 7<br>5.5 5.5<br>30 25.4 22 30 25.4 22<br>5.5 5.5<br>15 15<br>**----- End of picture text -----**<br>


## **Installation Hints** 

**==> picture [500 x 119] intentionally omitted <==**

**----- Start of picture text -----**<br>
To avoid interference from inductive voltage / Relief of the cable strain Protection of the sensing face Sensor mounted on a mobile carrier<br>current peaks, separate the proximity switch<br>cables from any other power cables. E.g.<br>Engine, contactor or solenoid cables<br>Incorrect<br>Incorrect<br>Incorrect Correct<br>Correct<br>> 100 mm<br>A proximity switch should not serve Any repetitive flexing of the<br>The cable should not be pulled as mechanical stop cable should be avoided<br>**----- End of picture text -----**<br>


## **Accessories** 

- Mounting bracket APD30-MB1 or APD30-MB2 to be 

- purchased separately. 

## **Deliver Contents y** 

- Photoelectric switch: PD30CNR60 ... 

- Screwdriver 

- **Packaging:** Plastic bag 

Specifications are subject to change without notice (27.10.2022) 

**3**