PD30CNG02PPM5RT

## **Photoelectrics Retro-reflective for Transparent Objects Type PD30CNG02....RT** 

- **Miniature sensor range** 

- **Range: 2 m, with reflector** 

- **Sensitivity adjustment by Teach-In programming** 

- **Modulated, red light 617 nm** 

- **Supply voltage: 10 to 30 VDC** 

- **Output: 100 mA, NPN or PNP preset** 

- **Make and break switching function programmable** 

- **LED indication for output, stability and power ON** 

- **Protection: reverse polarity, short circuit and transients** 

- **Cable and plug versions** 

- **Excellent EMC performance** 

- **Remote teach features** 

## **Product Descri tion p** 

The PD30CNG02 sensor family comes in a compact 10 x 30 x 20 mm reinforced PMMA/ABS housing. 

The Teach-In function for adjustment of the sensitivity makes the sensors highly flexible. The output type is preset (NPN or PNP), and the output switching function is programmable (NO or NC). A remote teach feature allow the sensor to be set up from e.g. a PLC. 

The sensors are useful in applications where detection of transparent objects are needed. 

Compact housing and high power LED for excellent performance-size ratio. 

**Orderin Ke g y PD30CNG02PPM5RT Type Housing style Housing size Housing material Housing length Detection principle Sensing distance Output type Output configuration Connection type Remote teach** 

## **T e Selection yp** 

**Housing Range Connection W x H x D Sn** 

**Ordering no. NPN Make or break switching** 

**Ordering no. PNP Make or break switching** 

Cable Plug 

10 x 30 x 20 mm 2 m Cable 10 x 30 x 20 mm 2 m Plug **Note:** Reflectors to be ordered separately 

**PD 30 CNG 02 NPRT PD 30 CNG 02 NPM5RT** 

**PD 30 CNG 02 PPRT PD 30 CNG 02 PPM5RT** 

## **S** EN 60947-5-2 **pecifications** 

|**Specificationsecifications**EN 60947-5-2|EN 60947-5-2|
|---|---|
|**Rated operating distance**(Sn) Up to 2 m, with reflector|) Up to 2 m, with reflector|
|**Detection reliability**<br>**Blind zone**<br>**Sensitivity**<br>**Temperature drift**<br>**Hysteresis**(H)<br> (differential travel)<br>**Rated operational volt.**(UB)<br>**Ripple**(Urpp)<br>**Output current**<br>Continuous (Ie)<br>Short-time (I)<br>**No load supply current**(Io)|Ø 80 mm(ER4)<br>20% attenuation<br>10 mm<br>Adjustable byTeach-In<br>≤ 0.1%/ºC<br>Teach settings are valid for<br>teach temperature ± 20°C<br>≤ 10%<br>10 to 30 VDC<br>(ripple included)<br>≤ 10%<br>≤ 100 mA<br>≤ 100 mA<br>(max. load capacity100 nF)<br>≤ 30 mA @ 24 VDC|
|**Minimum operational current**(Im)|0.5 mA|
|**OFF-state current**(Ir)|≤ 100µA|
|**Voltage drop **(Ud)|≤ 2.4 VDC @ 100 mA|
|**Protection**|Short-circuit, reverse polarity|
||and transients|



**Light source** inGaAlP, LED, 617 nm **Light type, not polarized** Red, modulated **Sensing angle** ± 2º **Ambient light** 10,000 lux **Light spot** 110 mm @ 1.5 m **Operating frequency** 1000 Hz **Response time** OFF-ON (tON) ≤ 0.5 ms ON-OFF (tOFF ) ≤ 0.5 ms **Power ON delay** (tv) ≤ 300 ms **Output function** NPN and PNP Preset NO/NC switching function Set up by button **Remote teach function** Teach on (push button active) 0 to 2.5 VDC (NPN) 5 to 30 VDC (PNP) Tamper proof When activated more than 20 sec. the sensor goes into a Tamper proof mode. **Indication** Output ON LED, yellow Signal stability ON and power ON LED, green 

Specifications are subject to change without notice (11.07.2016) 

**1** 

**PD30CNG02....RT** 

## **Specifications (cont.)** EN 60947-5-2 

|**Environment**|||
|---|---|---|
|Installation category<br>Pollution degree||III (IEC 60664/60664A;<br>60947-1)<br>3 (IEC 60664/60664A;|
|Degree ofprotection||60947-1)<br>IP 67(IEC 60529;60947-1)|
|**Ambient temperature**|||
|Operating<br>Storage<br>**Vibration**<br>**Shock**|1|-25°to +55°C (-13°to +131°F)<br>-40°to +70°C(-40°to +158°F)<br>0 to 55 Hz, 0.5 mm/7.5 g<br>(IEC 60068-2-6)<br>30 g / 11ms, 3 pos, 3 neg<br>per axis|
|||(IEC 60068-2-6, 60068-2-32)|



**==> picture [72 x 72] intentionally omitted <==**

|**Rated insulation voltage**|500 VAC(rms)|
|---|---|
|**Housing material**||
|Body|ABS|
|Front material|PMMA,red|
|**Connection**||
|Cable|PVC, black, 2 m|
||4 x 0.14 mm2, Ø = 3.3 mm|
|Plug|M8,4-pin(CON,54-series)|
|**Weight**|With cable: 40 g|
||With plug:  10 g|
|**CE-marking**|Yes|
|**Approvals**|cULus (UL508)|



## **O eration Dia ram p g** 

tv = Power ON delay 

**==> picture [483 x 64] intentionally omitted <==**

**----- Start of picture text -----**<br>
ON<br>Power supply OFF<br>Present<br>Object Not Present<br>ON Tv<br>Make Output (N.O.) OFF<br>ON Tv<br>Break Output (N.C.)  OFF<br>**----- End of picture text -----**<br>


## **Wiring Diagrams** 

**==> picture [500 x 127] intentionally omitted <==**

**----- Start of picture text -----**<br>
NPN PNP<br>1 BN V 1 BN V<br>2 WH 4 BK<br>Remote teach 4 BK Remote teach 2 WH<br>3 BU 3 BU<br>V (GND) V (GND)<br>Remote teach input  Remote teach input<br>active when connected  active when connected<br>to GND to V+<br>**----- End of picture text -----**<br>


## **Detection Diagram** 

**==> picture [244 x 149] intentionally omitted <==**

**----- Start of picture text -----**<br>
150<br>100<br>50<br>0<br>0 500 1000 1500 2000 2500 3000<br>-50<br>-100<br>-150<br>Distance [mm]<br>Width [mm]<br>**----- End of picture text -----**<br>


## **Excess Gain** 

**==> picture [245 x 149] intentionally omitted <==**

**----- Start of picture text -----**<br>
100<br>10<br>1<br>10 100 1000 10000<br>Distance (mm)<br>Excess Gain<br>**----- End of picture text -----**<br>


Specifications are subject to change without notice (11.07.2016) 

**2** 

**PD30CNG02....RT** 

## **Si nal Stabilit Indication g y** 

**==> picture [244 x 161] intentionally omitted <==**

**----- Start of picture text -----**<br>
Excess Gain<br>1.05 Operation level x 1.05<br>1.0 Operation level<br>0.95 Operation level x 0.95<br>Time<br>Green LED ON<br>Yellow LED ON<br>**----- End of picture text -----**<br>


**==> picture [72 x 72] intentionally omitted <==**

## **Accessories** 

**==> picture [245 x 161] intentionally omitted <==**

**----- Start of picture text -----**<br>
21.2<br>14<br>9° 1.2 32.4<br>25.4<br>3.2 1.2<br>13.5 16.2<br>5.7 6.0 6.0 5.2<br>4.4 4.4<br>Mounting bracket: APD30-MB1 Mounting bracket: APD30-MB2<br>25.4 9°<br>39<br>3.2 26,3 29.3<br>10<br>7.3 10 8.2 4.4<br>16 3 14<br>**----- End of picture text -----**<br>


## **Dimensions** 

**==> picture [502 x 370] intentionally omitted <==**

**----- Start of picture text -----**<br>
Cable version Plug version<br>Teach Button Teach Button<br>Output LED Power / Stability LED Output LED Power / Stability LED<br>Yellow  Green Yellow  Green<br>10.6 10.6<br>10.8 10.8<br>17 17<br>Receiver Two, 9.5 dia. Receiver Two, 9.5 dia.<br>Lenses Lenses<br>Optical axis Optical axis<br>Two M3 Emitter Two M3 Emitter<br>10.25<br>Installation Hints<br>To avoid interference from inductive voltage / Relief of the cable strain Protection of the sensing face Sensor mounted on a mobile carrier<br>current peaks, separate the proximity switch<br>cables from any other power cables. E.g.<br>Engine, contactor or solenoid cables<br>Incorrect<br>Incorrect<br>Incorrect Correct<br>Correct<br>> 100 mm<br>A proximity switch should not serve Any repetitive flexing of the<br>The cable should not be pulled as mechanical stop cable should be avoided<br>10.6 6 10.6 6<br>20 20<br>1.1 1.1<br>5.5 5.5<br>30 25.4 22 30 25.4 22<br>5.5 5.5<br>15 15<br>**----- End of picture text -----**<br>


## **Deliver Contents y** 

- Photoelectric switch: PD 30 CNG 02...RT 

- Installation instruction 

## **Accessories** 

   - Reflector is to be purchased separately 

   - Mounting bracket APD30-MB2 to be purchased separately 

- Mountingbracket APD30-MB1 

- **Packaging:** Cardboard box 

Specifications are subject to change without notice (11.07.2016) 

**3** 

**PD30CNG02....RT** 

## **Teach functions** 

## **Normal operation, optimized switching point.** 

1. Line up the sensor with the reflector. Yellow LED and Green LED are ON. 

2. Press the button for 3 seconds until both LEDs flashes simultaneously. 

   - (The first switch point is stored) 

3. Place the object between the sensor and reflector in the detection zone. 

4. Press the button once and the sensor is ready to operate  (Green LED ON, Yellow LED ON) 

   - (The second switch point is stored) 

**==> picture [199 x 81] intentionally omitted <==**

**----- Start of picture text -----**<br>
1 2 3 4<br>3 sec. Push once<br>**----- End of picture text -----**<br>


**==> picture [72 x 72] intentionally omitted <==**

## **For make or break set-up (N.O. or N.C.)** 

1.  Press the button for 10 seconds, until the green LEDs flashes. 

2. While the green LED flashes, the output is inverted each time the button is pressed. Yellow LED indicates N.O. function selected. 

If the button is not pressed within the next 10 

seconds, the current output is stored. 

**==> picture [135 x 81] intentionally omitted <==**

**----- Start of picture text -----**<br>
1 2<br>10 sec. Push once<br>**----- End of picture text -----**<br>


## **For maximum sensing distance** 

**(default setting)** 

1. Line up the sensor with the reflector, place a new transparant object between the sensor and reflector in the detection zone. Yellow LED is OFF and Green LED is ON. 

2. Press the button for 3 seconds until both LEDs flashes simultaneously. 

   - (The first switch point is stored) 

3. Press the button a second time and the sensor is ready to operate  (Green LED ON, Yellow LED ON) (The second switch point is stored) 

**==> picture [193 x 83] intentionally omitted <==**

**----- Start of picture text -----**<br>
1 2 3<br>3 sec. Push once<br>**----- End of picture text -----**<br>


## **For the most transparent objects** 

1. Line up the sensor with the reflector. Yellow LED and Green LED are ON. 

2. Press the button for 3 seconds until both LEDs flashes simultaneously. 

   - (The first switch point is stored) 

3. Press the button a second time and the sensor is ready to operate (Green LED ON, Yellow LED ON) (The second switch point is stored) 

**==> picture [164 x 81] intentionally omitted <==**

**----- Start of picture text -----**<br>
1 2 3<br>3 sec. Push once<br>**----- End of picture text -----**<br>


Specifications are subject to change without notice (11.07.2016) 

**4**