Image not available
Illustrative purposes only
PD30CNB15NPM5RT
DISTANCE PHOTO
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: CARLO GAVAZZI / PARTNER STOCK
- Product type:
- SVHC: No SVHC (25-Jun-2025)
| Delivery and price | |
|---|---|
| Units per pack | 3 |
| Price | 131.43 € |
| Current stock | 10+ |
| Lead time | 30 days |
Datasheet
## **Photoelectrics Diffuse-reflective, Background Suppression Type PD30CNB15....RT**
- **Miniature sensor range**
- **Range: 150 mm**
- **Sensitivity adjustment by Teach-In programming**
- **Modulated, red light 660 nm**
- **Supply voltage: 10 to 30 VDC**
- **Output: 100 mA, NPN or PNP preset**
- **Make or break switching function programmable**
- **LED indication for output, stability and power ON**
- **Protection: reverse polarity, short circuit and transients**
- **Cable and plug versions**
- **Excellent EMC performance**
- **Remote teach features**
## **Product Descri tion p**
The PD30CNB15 sensor family comes in a compact 10 x 30 x 20 mm reinforced PMMA/ABS housing.
The Teach-In function for adjustment of the sensitivity makes the sensors highly flexible. The output type is preset (NPN or PNP), and the output switching function is NO or NC output.
The sensors are useful in applications where high-accuracy detection as well as small size is required. Compact housing and high power LED for excellent performance-size ratio.
A remote teach feature allow the sensor to be set up from e.g. a PLC.
**Orderin Ke g y PD30CNB15PPM5RT Type Housing style Housing size Housing material Housing length Detection principle Sensing distance Output type Output configuration Connection type Remote teach**
## **T e Selection yp**
|**Housing**|**Range**|**Connection**|
|---|---|---|
|**W x H x D**|**Sn**||
|10 x 30 x 20 mm|150 m m|Cable|
|10 x 30 x 20 mm|150 m m|Plug|
**Ordering no. Ordering no. NPN PNP Make or break switching Make or break switching**
**PD 30 CNB 15 NPRT PD 30 CNB 15 PPRT PD 30 CNB 15 NPM5RT PD 30 CNB 15 PPM5RT**
## **S** EN 60947-5-2 **pecifications**
|**Rated operating distance**(Sn) Up to 150 mm,|) Up to 150 mm,|
|---|---|
|**Blind zone**<br>**Sensitivity**<br>**Temperature drift**<br>**Hysteresis**(H)<br>90% White<br>18% Grey<br>**Rated operational volt.**(UB)<br>**Ripple**(Urpp)<br>**Output current**<br>Continuous (Ie)<br>Short-time (I)<br>**No load supply current**(Io)|referece target Kodak test<br>card R27, white, 90%<br>reflective,200 x 200 mm<br>30 mm<br>Adjustable byTeach-In<br>≤ 0.2%/ºC<br>< 10%<br>< 15%<br>10 to 30 VDC<br>(ripple included)<br>≤ 10%<br>≤ 100 mA<br>≤ 100 mA<br>(max. load capacity100 nF)<br>≤ 32 mA @ 24 VDC|
|**Minimum operational current**(Im)|0.5 mA|
|**OFF-state current**(Ir)|≤ 100µA|
|**Voltage drop **(Ud)|≤ 2.4 VDC @ 100 mA|
|**Protection**|Short-circuit, reverse polarity|
||and transients|
|**Light source**|GaAlAs,LED,660 nm|
|---|---|
|**Light type**|Red,modulated|
|**Sensing angle**|± 2º|
|**Ambient light**|10,000 lux|
|**Light spot**|110 mm @ 1.5 m|
|**Operating frequency**|1000 Hz|
|**Response time**||
|OFF-ON (tON)|≤ 0.5 ms|
|ON-OFF(tOFF)|≤ 0.5 ms|
|**Power ON delay **(tv)|≤ 400 ms|
|**Output function**||
|NPN and PNP|Preset|
|NO/NC switchingfunction|Set upbybutton|
|**Remote teach function**||
|Teach on|0 to 2.5 VDC (NPN)|
||5 to 30 VDC (PNP)|
|Tamper proof|When activated more than|
||20 sec. the sensor goes into|
||a Tamperproof mode.|
|**Indication**||
|Output ON|LED, yellow|
|Signal stability ON and power ONLED, green|LED, green|
Specifications are subject to change without notice (14.06.2016)
**1**
**PD30CNB15....RT**
## **Specifications (cont.)**
|**Environment**||
|---|---|
|Installation category<br>Pollution degree|III (IEC 60664/60664A;<br>60947-1)<br>3 (IEC 60664/60664A;|
|Degree ofprotection<br>**Ambient temperature**<br>Operating<br>Storage<br>**Vibration**<br>**Shock**|60947-1)<br>IP 67(IEC 60529;60947-1)<br>-25°to +55°C (-13°to +131°F)<br>-40°to +70°C(-40°to +158°F)<br>10 to 55 Hz, 0.5 mm/7.5 g<br>(IEC 60068-2-6)<br>30 g / 11ms, 3 pos, 3 neg<br>per axis|
||(IEC 60068-2-6, 60068-2-32)|
**==> picture [72 x 72] intentionally omitted <==**
|**Rated insulation voltage**|500 VAC(rms)|
|---|---|
|**Housing material**||
|Body|ABS|
|Front material|PMMA,red|
|**Connection**||
|Cable|PVC, black, 2 m|
||4 x 0.14 mm2, Ø = 3.3 mm|
|Plug|M8,4-pin(CON. 54-series)|
|**Weight**|With cable: 40 g|
||Withplug: 10g|
|**CE-marking**|Yes|
|**Approvals**|cULus (UL508)|
## **O eration Dia ram p g**
tv = Power ON delay
ON Power supply OFF Present Object Not Present ON Tv Break Output (N.C.) OFF ON Tv Make Output (N.O.) OFF
**==> picture [188 x 58] intentionally omitted <==**
**----- Start of picture text -----**<br>
Tv<br>**----- End of picture text -----**<br>
## **Wiring Diagrams**
**==> picture [500 x 130] intentionally omitted <==**
**----- Start of picture text -----**<br>
NPN PNP<br>1 BN V 1 BN V<br>2 WH 4 BK<br>Remote teach 4 BK Remote teach 2 WH<br>3 BU 3 BU<br>V (GND) V (GND)<br>Remote teach input Remote teach input<br>active when connected active when connected<br>to GND to V+<br>**----- End of picture text -----**<br>
## **Detection Diagram**
**==> picture [244 x 162] intentionally omitted <==**
**----- Start of picture text -----**<br>
5<br>4<br>3<br>2<br>1<br>0<br>-1<br>-2<br>-3<br>-4<br>-5<br>0 50 100 150 200<br>Sensing range (mm)<br> (mm)<br>**----- End of picture text -----**<br>
## **Sensin Conditions g**
**==> picture [245 x 162] intentionally omitted <==**
**----- Start of picture text -----**<br>
30<br>5% / 90%<br>25<br>20<br>18% / 90%<br>15<br>10<br>90% / 90%<br>5<br>0<br>0 20 40 60 80 100 120 140 160<br>Distance (mm)<br>5% / 90% 18% / 90% 90% / 90%<br>Black on White Grey on White White on White<br>% of sensing distance<br>**----- End of picture text -----**<br>
Specifications are subject to change without notice (14.06.2016)
**2**
**PD30CNB15....RT**
## **Dimensions**
**==> picture [72 x 72] intentionally omitted <==**
**==> picture [500 x 219] intentionally omitted <==**
**----- Start of picture text -----**<br>
Cable version Plug version<br>Teach Button Teach Button<br>Output LED Power / Stability LED Output LED Power / Stability LED<br>Yellow Green Yellow Green<br>10.6 10.6<br>10.8 10.8<br>17 17<br>Receiver Two, 9.5 dia. Receiver Two, 9.5 dia.<br>Lenses Lenses<br>Optical axis Optical axis<br>Two M3 Emitter Two M3 Emitter<br>10.25<br>10.6 6 10.6 6<br>20 20<br>1.1 1.1<br>5.5 5.5<br>30 25.4 22 30 25.4 22<br>5.5 5.5<br>15 15<br>**----- End of picture text -----**<br>
## **Installation Hints**
**==> picture [500 x 119] intentionally omitted <==**
**----- Start of picture text -----**<br>
To avoid interference from inductive voltage / Relief of the cable strain Protection of the sensing face Sensor mounted on a mobile carrier<br>current peaks, separate the proximity switch<br>cables from any other power cables. E.g.<br>Engine, contactor or solenoid cables<br>Incorrect<br>Incorrect<br>Incorrect Correct<br>Correct<br>> 100 mm<br>A proximity switch should not serve Any repetitive flexing of the<br>The cable should not be pulled as mechanical stop cable should be avoided<br>**----- End of picture text -----**<br>
## **Accessories**
**==> picture [244 x 162] intentionally omitted <==**
**----- Start of picture text -----**<br>
21.2<br>14<br>9° 1.2 32.4<br>25.4<br>3.2 1.2<br>13.5 16.2<br>5.7 6.0 6.0 5.2<br>4.4 4.4<br>Mounting bracket: APD30-MB1 Mounting bracket: APD30-MB2<br>25.4 9°<br>39<br>3.2 26,3 29.3<br>10<br>7.3 10 8.2 4.4<br>16 3 14<br>**----- End of picture text -----**<br>
## **Deliver Contents y**
- Photoelectric switch: PD 30 CNB 15 ...
- Installation instruction
- Mountingbracket APD30-MB1
- **Packaging:** Cardboard box
- Mounting bracket APD30-MB2 to be purchased seperately
- Connector type CONG 5A../CON. 54NF.. series.
Specifications are subject to change without notice (14.06.2016)
**3**
**PD30CNB15....RT**
## **Teach functions**
## **Normal operation, optimized switching point.**
1. Line up the sensor at the background. Yellow LED is not important and Green LED is ON.
2. Press the button for 3 seconds until both LEDs flashes simultaneously.
- (The first switch point is stored)
3. Place the object in the detection zone.
4. Press the button once and the sensor is ready to operate (Green LED ON, Yellow LED ON)
- (The second switch point is stored)
- a) if the object is to close to the background the sensor will teach both background and object as object.
**==> picture [199 x 81] intentionally omitted <==**
**----- Start of picture text -----**<br>
1 2 3 4<br>3 sec. Push once<br>**----- End of picture text -----**<br>
**==> picture [72 x 72] intentionally omitted <==**
## **For dynamic set-up (running process)**
- Line up the sensor at the object. Green LED is ON, status on the yellow LED is not important.
1.
2. Press the button for 3 second until both LEDs flashes simultaneously.
3. Press the button a second time for at least one second, both LED’s flashes fast siultainiously and keep the button pressed for at least one process cycle, release the button and the sensor is ready to operate (The second switch point is stored)
**==> picture [161 x 83] intentionally omitted <==**
**----- Start of picture text -----**<br>
1 2 3<br>3 sec. One cycle<br>**----- End of picture text -----**<br>
## **For make or break set-up (N.O. or N.C.)**
## **For maximum sensing distance (default setting)**
1. Line up the sensor without a background. Yellow LED is not important and Green LED is ON.
2. Press the button for 3 seconds until both LEDs flashes simultaneously.
1. Press the button for 10 seconds, until the green LEDs flashes.
2. While the green LED flashes, the output is inverted each time the button is pressed. Yellow LED indicates N.O. function selected.
- If the button is not pressed within the next 10 seconds, the current output is stored.
- (The first switch point is stored)
3. Press the button a second time and the sensor is ready to operate (Green LED ON, Yellow LED ON)
- (The second switch point is stored)
**==> picture [165 x 81] intentionally omitted <==**
**----- Start of picture text -----**<br>
1 2 3<br>3 sec. Push once<br>**----- End of picture text -----**<br>
**==> picture [135 x 85] intentionally omitted <==**
**----- Start of picture text -----**<br>
1 2<br>10 sec. Push once<br>**----- End of picture text -----**<br>
## **For minimum sensing distance**
1. Line up the sensor at the object. Yellow LED is not important and Green LED is ON.
2. Press the button for 3 seconds until both LEDs flashes simultaneously.
- (The first switch point is stored)
3. Press the button a second time and the sensor is ready to operate(Green LED ON, Yellow LED ON)
- (The second switch point is stored)
**==> picture [165 x 81] intentionally omitted <==**
**----- Start of picture text -----**<br>
1 2 3<br>3 sec. Push once<br>**----- End of picture text -----**<br>
Specifications are subject to change without notice (14.06.2016)
**4**
Updated at April 27, 2026
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 540,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →