PD2601

**PD2601 AC Solid State Relays** 

INTEGRATED CIRCUITS DIVISION 

|**Parameter**|**Rating**|**Units**|
|---|---|---|
|AC OperatingVoltage|260|Vrms|
|Load Current|1|Arms|
|On-State Voltage Drop<br>(IL=1Arms)|1.2|Vrms|



## **Features** 

- Load Current up to 1Arms 

- Blocking Voltages up to 600VP 

- 3750Vrms Input to Output Isolation 

- 5mA Sensitivity 

- Zero-Crossing Detection 

- DC Control, AC Output 

- TTL and CMOS Compatible 

- Low EMI and RFI Generation 

- High Noise Immunity 

- VDE compatible 

- Machine Insertable, Wave Solderable 

## **Description** 

The PD2601 is an AC Solid State Switch using optical coupling with dual power SCR outputs to produce an alternative to optocoupler and Triac circuits. The PD2601 switches are robust enough to provide a blocking voltage of up to 600VP and max surge current rating of 20A. In addition, tightly controlled zero-cross circuitry ensures switching of AC loads without the generation of transients. The input and output circuits are optically coupled to provide 3750Vrms of isolation and noise immunity between control and load circuits. As a result the PD2601 is well suited for industrial environments where electromagnetic interference would disrupt the operation of electromechanical relays. 

## **Approvals** 

- UL Recognized Component: UL 508 File E69938 

- CSA Certified Component: File 043639 

## **Applications** 

- Programmable Control 

- Process Control 

- Power Control Panels 

- Remote Switching 

- Gas Pump Electronics 

- Contactors 

- Large Relays 

- Solenoids 

- Motors 

- Heaters 

## **Ordering Information** 

**==> picture [238 x 202] intentionally omitted <==**

**----- Start of picture text -----**<br>
Part # Description<br>ea PD2601 4-Pin (16-Pin Body) DIP Package (25/Tube)<br>Pin Configuration<br>1 16<br>- LED + LED<br>ZC<br>=<br>10<br>AC Load<br>8<br>AC Load<br>**----- End of picture text -----**<br>


## **Pin Configuration** 

DS-PD2601-R14 

**1** 

**www.ixysic.com** 

**PD2601** 

INTEGRATED CIRCUITS DIVISION 

## **Absolute Maximum Ratings @ 25ºC** 

|**Parameter**|**Min**|**Max**|**Units**|
|---|---|---|---|
|BlockingVoltage|-|600|VP|
|Reverse Input Voltage|-|5|V|
|Input Control Current<br>Peak(10ms)|-|100|mA|
||-|1|A|
|Input Power Dissipation1|-|150|mW|
|Total Package Dissipation2|-|1600|mW|
|Isolation Voltage, Input to Output|3750|-|Vrms|
|Operational Temperature|-40|+85|ºC|
|Storage Temperature|-40|+125|ºC|



_Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied._ 

1  Derate linearly 1.33 mW / ºC 

2  Derate linearly 16.6 mW / ºC 

## **Electrical Characteristics @ 25ºC** 

|**Parameter**|**Conditions**|**Symbol**|**Min**|**Typ**|**Max**|**Units**|
|---|---|---|---|---|---|---|
|**Output Characteristics**|||||||
|AC OperatingVoltage|IF=5mA|VOP|20|-|260|Vrms|
|Load Current(Continuous)|VL=120-240VAC|IL|0.005|-|1|Arms|
|Maximum Surge Current|t<16ms|IPEAK|-|-|20|A|
|Off-State Leakage Current<br>~~—_SESer~~|VL=600VDC<br>~~—_SESer~~|ILEAK<br>~~—_SESer~~|-<br>~~—_SESer~~|-<br>~~—_SESer~~|1<br>~~—_SESer~~|mA<br>~~—_SESer~~|
|On-State Voltage Drop<br>~~—_SESer~~|IL=1.0Arms<br>~~—_SESer~~|-<br>~~—_SESer~~|-<br>~~—_SESer~~|-<br>~~—_SESer~~|1.2<br>~~—_SESer~~|Vrms<br>~~—_SESer~~|
|Critical Rate of Rise<br>~~—_SESer~~|-<br>~~—_SESer~~|dV/dt<br>~~—_SESer~~|1000<br>~~—_SESer~~|1200<br>~~—_SESer~~|-<br>~~—_SESer~~|V/µs<br>~~—_SESer~~|
|Switching Speeds<br>Turn-On<br>Turn-Off<br>~~—_SESer~~|IF=5mA<br>~~—_SESer~~|ton<br>~~—_SESer~~|-<br>~~—_SESer~~|-<br>~~—_SESer~~|0.5<br>~~—_SESer~~|Cycles<br>~~—_SESer~~|
|||toff<br>~~—_SESer~~|-<br>~~—_SESer~~|-<br>~~—_SESer~~|0.5<br>~~—_SESer~~||
|Zero-Cross Turn-On Voltage1<br>~~—_SESer~~<br>~~—————~~|1sthalf-cycle<br>~~—_SESer~~<br>~~—————~~|-<br>~~—_SESer~~<br>~~—————~~|-<br>~~—_SESer~~<br>~~—————~~|2<br>~~—_SESer~~<br>~~—————~~|5<br>~~—_SESer~~<br>~~—————~~|V<br>~~—_SESer~~<br>~~—————~~|
||Subsequent half-cycle<br>~~—————~~||-<br>~~—————~~|-<br>~~—————~~|1<br>~~—————~~|V<br>~~—————~~|
|OperatingFrequency<br>~~—————~~|-<br>~~—————~~|-<br>~~—————~~|20<br>~~—————~~|-<br>~~—————~~|500<br>~~—————~~|Hz<br>~~—————~~|
|Load Power Factor for Guaranteed Turn-On2<br>~~—————~~|-<br>~~—————~~|PF<br>~~—————~~|0.25<br>~~—————~~|-<br>~~—————~~|-<br>~~—————~~|-<br>~~—————~~|
|Capacitance Input-To-Output<br>~~a~~|-<br>~~a~~|CI/O<br>~~a~~|-<br>~~a~~|3<br>~~a~~|-<br>~~a~~|pF<br>~~a~~|
|**Input Characteristics**<br>~~a~~|||||||
|Input Control Current<br>For Normal Environment<br>For High Noise Environment<br>~~a~~|-<br>~~a~~|IF<br>~~a~~|-<br>~~a~~|-<br>~~a~~|5<br>~~a~~|mA<br>~~a~~|
||-<br>~~a~~||-<br>~~a~~|-<br>~~a~~|10<br>~~a~~||
|Input Voltage Drop<br>~~a~~|IF=5mA<br>~~a~~|VF<br>~~a~~|0.9<br>~~a~~|1.2<br>~~a~~|1.4<br>~~a~~|V<br>~~a~~|
|Input Dropout Voltage|-|-|0.8|-|-|V|
|Reverse Input Current|VR=5V|IR|-|-|10|µA|



1   Zero Cross 1st half-cycle @ < 100Hz. 

2   Snubber circuits may be required at low power factors. 

R14 

**www.ixysic.com** 

**2** 

**PD2601** 

INTEGRATED CIRCUITS DIVISION 

## **PERFORMANCE DATA @ 25ºC (Unless Otherwise Noted) *** 

**==> picture [489 x 276] intentionally omitted <==**

**----- Start of picture text -----**<br>
Typical Forward Voltage<br>Load Current, Free Air Max. Surge Current (Non-Repetitive) vs. Temperature<br>1.2 25 1.3<br>NOTE: Values apply to<br>1.0 20 TJ=50ºC before Surge<br>1.2<br>0.8<br>R JA=60ºC/W 15<br>0.6 1.1<br>10<br>0.4<br>1.0<br>0.2 5<br>0 == 0 = 0.9<br>-40 0 55 85 16 50 100 0 10 25 40 55 70 85<br>Ambient Temperature (ºC) Pulse Duration (ms) Ambient Temperature (ºC)<br>SS tt<br>Typical dV/dt vs. Temperature dV/dt Method<br>1400<br>1200<br>Vo<br>1000<br>800 Vo = 300V<br>63%<br>600 dV = 0.63 x 300V = 189<br>dt RC RC<br>400 In accordance with<br>EIA/NARM Standards<br>200 10% RS-443 for Solid State Relays<br>0<br>=v 0 25 50 85<br>RC<br> Ambient Temperature (ºC)<br>)rms<br>Load Current (A Forward Voltage (V)<br>Peak Surge Current (A)<br>Critical Rate of Rise (V/µs)<br>**----- End of picture text -----**<br>


*The Performance data shown in the graphs above is typical of device performance.  For guaranteed parameters not indicated in the written specifi cations, please contact our application department. 

R14 

**www.ixysic.com** 

**3** 

**PD2601** 

INTEGRATED CIRCUITS DIVISION 

## **Manufacturing Information** 

## **Moisture Sensitivity** 

All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to 

the latest version of the joint industry standard, **IPC/JEDEC J-STD-020** , in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. 

Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. 

This product carries a **Moisture Sensitivity Level (MSL) rating** as shown below, and should be handled according to the requirements of the latest version of the joint industry standard **IPC/JEDEC J-STD-033** . 

|**Device**<br>~~————————~~|**Moisture Sensitivity Level (MSL) Rating**<br>~~————————~~|
|---|---|
|PD2601<br>~~————————~~|MSL 1<br>~~————————~~|



## **ESD Sensitivity** 

This product is **ESD Sensitive** , and should be handled according to the industry standard **JESD-625** . 

## **Reflow Profile** 

This product has a maximum body temperature and time rating as shown below. All other guidelines of **J-STD-020** must be observed. 

**Device Maximum Temperature x Time** PD2601 245ºC for 30 seconds ~~————~~ 

## **Board Wash** 

IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used. 

R14 

**www.ixysic.com** 

**4** 

**PD2601** 

INTEGRATED CIRCUITS DIVISION 

## **Mechanical Dimensions** 

## **PD2601** 

**==> picture [447 x 179] intentionally omitted <==**

**----- Start of picture text -----**<br>
7.620 ± 0.254 0.254 TYP PCB Hole Pattern<br>19.202 ± 0.381 (0.010 TYP)<br>(0.300 ± 0.010)<br>(0.756 ± 0.015)<br>Pin 16 0.800 DIA x 4<br>(0.031 DIA x 4)<br>6.350 ± 0.127 9.144 ± 0.508 Pin 16<br>(0.250 ± 0.005) (0.360 ± 0.020)<br>7.620<br>Pin 1 17.780 ± 0.127 (0.300)<br>(0.700 ± 0.005)<br>15.240 ± 0.127 7.239 TYP<br>(0.600 ± 0.005) (0.285 TYP) Pin 1 15.240<br>(0.600)<br>3.302 ± 0.051 2.540 ± 0.127<br>(0.130 ± 0.002) (0.100 ± 0.005) 17.780<br>(0.700)<br>4.064 TYP<br>(0.160 TYP)<br>0.559 ± 0.102 0.457 ± 0.076 - Dimensionsmmmm<br>(0.022 ± 0.004) (0.018 ± 0.003) (inches)<br>**----- End of picture text -----**<br>


- Dimensionsmmmm (inches) 

## **For additional information please visit our website at: www.ixysic.com** 

IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice.  Neither circuit patent licenses nor indemnity are expressed or implied.  Except as set forth in IXYS Integrated Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. 

The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage.  IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice. 

Specification:  DS-PD2601-R14 ©Copyright 2013, IXYS Integrated Circuits Division All rights reserved.  Printed in USA. 10/21/2013 

**5**