PD112CNB25BPM1

## **Photoelectrics Background Suppression Type PD112CNB25BP..** 

- **Range: 2500 mm** 

- **Accurate & stable distance adjustment** 

- **Modulated, infrared light 850 nm** 

- **Supply voltage: 10 to 30 VDC** 

- **Output: 200 mA, NPN or PNP preset** 

- **Make or break switching function selectable** 

- **Adjustable ON- / OFF delay, 1 – 16 sec.** 

- **LED indication for output and power ON** 

- **Protection: reverse polarity, short circuit and transients** 

- **Cable and plug versions** 

- **Excellent EMC performance** 

- **Remote test feature (mute)** 

**Product Descri tion Orderin Ke p g y PD112CNB25BPM1** The PD112CNB25 sensor remotely disable (mute) the **Type** comes in a 112 x 45 x 25 mm emitter and thereby evaluate **Housing style** strong polycarbonate (PC) the sensor function from a **Housing size** housing. The sensors are door controller or e.g. a PLC. **Housing material** useful in applications where The output type is preset **Housing length** long range and high accuracy (NPN and PNP) with select- **Detection principle** detection is required. able switching function NO/ **Sensing distance** Robust housing, a sophistiNC. **Output type** cated mechanical design and ~~|~~ 2 selectable modes are built **Output configuration** high power LED for excellent in: ”Industrial” for general **Connection type** performance in harsh enviautomation and ”Door” speronments. cifically for control of doors & The sensor has a test input, gates. 

The sensor has a test input, for door mode, designed to 

## **T e Selection yp** 

|**Housing**|**Range**|**Connection**|
|---|---|---|
|**W x H x D**|**Sn**||
|25 x 107.5 x45 mm|500 - 2500 mm|Cable|
|25 x 107.5 x45 mm|500 - 2500 mm|Plug|



**Ordering no. NPN and PNP Make or break switching** 

**PD 112 CNB 25 BP PD 112 CNB 25 BPM1** 

## **S pecifications** 

|**Rated operating distance**(Sn) 50 to 2500 mm,|) 50 to 2500 mm,|
|---|---|
||referece target Kodak<br>test card R27, white, 90%<br>reflective,200 x 200 mm|
|**Background adjustment**<br>**Blind zone**<br>**Temperature drift**|500 to 2500 mm<br>(28 turns calibration screw)<br>50 mm<br>≤ 0.2%/ºC|
|**Rated operational volt.**(UB)|10 to 30 VDC|
||(ripple included)|
|**Ripple**(Urpp)<br>**Output current**<br>Continuous (Ie)|≤ 10%<br>≤ 200 mA<br>(max. load capacity100 nF)|
|**No load supply current**(Io)|≤ 40 mA @ 24 VDC|
|**Minimum operational current**(Im)<br>**OFF-state current**(Ir)<br>**Voltage drop **(Ud)<br>**Protection**<br>**Light source**|0.5 mA<br>≤ 100µA<br>≤ 2.5VDC @ 200 mA<br>Short-circuit, reverse polarity<br>and transients<br>GaAlAs, LED, 850 nm|



|**Light type**||Infrared,modulated|
|---|---|---|
|**Sensing angle**|||
|Industry||± 1.9º|
|Door||± 2.6º|
|**Ambient light**||10,000 lux|
|**Light spot**||60 mm @ 1.5 m|
|**Operating frequency**|||
||Industry|250 Hz|
||Door|16.7 Hz|
|**Response time**|||
|OFF-ON (tON)|Industry|≤ 2 ms|
|ON-OFF (tOFF)|Industry|≤ 2 ms|
|OFF-ON (tON)|Door|≤ 30 ms|
|ON-OFF(tOFF)|Door|≤ 30 ms|
|**Power ON delay **(tv)||≤ 50 ms|
|**Output delay**|||
|ON-delay||1-16 s|
|OFF-delay||1-16 s|
|**Output function**|||
|NPN and PNP||Preset|
|NO/NC switching function||Selectable by DIP switch|



Specifications are subject to change without notice (13.06.2017) 

**1** 

**PD112CNB25BP..** 

## **Specifications (cont.)** 

|**Test input**||
|---|---|
|Door mode||
|Emitter off (voltagelevel)|< 1 VDC, NPN|
|Input current<br>Industrial mode|(No pull-up resistor) or<br>> 9 VDC PNP<br>(No pull-down resistor)<br>< 3 mA DC<br>Not avaliable|
|**Indication**||
|Output ON<br> Power ON<br>**Environment**<br>Installation category<br>Pollution degree|LED, yellow<br>LED, green<br>III (IEC 60664/60664A;<br>60947-1)<br>3 (IEC 60664/60664A;|
||60947-1)|
|Degree ofprotection|IP 67(IEC 60529;60947-1)|
|**Ambient temperature**||
|Operating|-25°to +55°C (-13°to +131°F)|
|Storage|-25°to +80°C (-13°to +176°F)|



**==> picture [72 x 72] intentionally omitted <==**

|**Vibration**|10 to 150 Hz, 0.5 mm/7.5 g||
|---|---|---|
||(IEC 60068-2-6)||
|**Shock**|2 x 1 m, 100 x 500 mm||
||(IEC 60068-2-32)||
|**Rated insulation voltage**|2 kV(rms)||
|**Housing material**|||
|Body|PC (polycarbonate), black||
|Cover|PC(polycarbonate),clear||
|**Connection**|||
|Cable|PVC, black, 2 m||
||5 x 0.34 mm2, Ø = 5.2 mm||
|Plug|M12,5-pin(CONB15-series)||
|**Weight**|With cable: 160 g||
||Withplug:  80g||
|**CE-marking**|Yes||
|**Approvals**|cULus (UL508)||



## **O eration Dia ram p g** 

With time delay 

Without time delay 

**==> picture [498 x 41] intentionally omitted <==**

**----- Start of picture text -----**<br>
ON<br>Power supply OFF<br>Present<br>Background Not Present Dont care<br>**----- End of picture text -----**<br>


||With time delay|With time delay|With time delay|With time delay|With time delay|With time delay|With time delay|With time delay|Without time delay|Without time delay|Without time delay|
|---|---|---|---|---|---|---|---|---|---|---|---|
|||||||||||||
|||||||||||||
|||||||||||||
||~~Dont care~~|||||||||||
|||||||||||||
|Object/Target<br>Not Present<br>Present<br>Test input*<br>OFF<br>ON<br>Yellow LED<br>OFF<br>ON<br>Break Output (NC)<br>OFF<br>ON<br>Make Output (NO)<br>OFF<br>ON||||||||||||
|||||||||||||
||t||t<br>t||||t|||||
|||||||||||||
||tv<br>t||t<br>t||||t|||||
|||||||||||||
|||||||||||||
|||||||||||||
|||||||||||||
|||||||||||||



tv = Power on delay,   t = Time delay (delay on operate and delay on release) 

- Only active in Door Mode 

## **Detection Diagram** 

**==> picture [244 x 171] intentionally omitted <==**

**----- Start of picture text -----**<br>
Detection diagram PD112 BGU white<br>50<br>40<br>30<br>20<br>10<br>Door<br>0<br>Industry<br>-10<br>-20<br>-30<br>-40<br>-50<br>0  500  1000  1500  2000  2500  3000<br>Sensing range (mm)<br> (mm)<br>**----- End of picture text -----**<br>


## **Wiring Diagrams** 

**==> picture [245 x 171] intentionally omitted <==**

**----- Start of picture text -----**<br>
BN<br>BK<br>WH<br>BU PNP*<br>GY (test input)<br>NPN*<br>* or potential free contact<br>**----- End of picture text -----**<br>


Specifications are subject to change without notice (13.06.2017) 

**2** 

**PD112CNB25BP..** 

## **Sensin Conditions “Industrial” mode g** 

**==> picture [72 x 72] intentionally omitted <==**

**==> picture [234 x 115] intentionally omitted <==**

**----- Start of picture text -----**<br>
White background (90%)<br>35<br>30<br>25<br>20<br>15<br>10<br>5<br>0<br>0 50 100 150 200 250 300<br>Distance cm<br>background (cm)<br>Object distance from<br>**----- End of picture text -----**<br>


In this mode the maximum operating frequency is set to 250 Hz and detection is optimized for objects close to the background for top performance in general industry automation applications such as pallet wrapping machines, airport baggage conveyors, wood planks handling/stacking. 

**==> picture [103 x 47] intentionally omitted <==**

**----- Start of picture text -----**<br>
White object (90%)<br>Grey object (18%)<br>Black object (6%)<br>**----- End of picture text -----**<br>


## **Sensin Conditions “Door” mode g** 

**==> picture [234 x 238] intentionally omitted <==**

**----- Start of picture text -----**<br>
Black background (6%)<br>60<br>50<br>40<br>30<br>20<br>10<br>0<br>0 50 100 150 200 250 300<br>Distance cm<br>White background (90%)<br>16<br>14<br>12<br>10<br>8<br>6<br>4<br>2<br>0<br>0 50 100 150 200 250 300<br>Distance cm<br>background (cm)<br>Object distance from<br>background (cm)<br>Object distance from<br>**----- End of picture text -----**<br>


In this mode various parameters are optimized for monitoring and control of doors, from a position above the door/in the ceiling. Maximum operating frequency is set to 16.7 Hz, adapting to moving persons, and the test input – for evaluation of the sensor functioning through muting of the emitter – is enabled for use by a door controller or e.g. a PLC. 

**==> picture [250 x 166] intentionally omitted <==**

**----- Start of picture text -----**<br>
White object (90%)<br>Grey object (18%)<br>Black object (6%)<br>Grey background (18%)<br>60<br>50<br>40<br>30<br>20<br>10<br>0<br>50 100 150 200 250 300<br>Distance cm<br>background (cm)<br>Object distance from<br>**----- End of picture text -----**<br>


## **Detection Princi le p** 

**==> picture [279 x 142] intentionally omitted <==**

**----- Start of picture text -----**<br>
NC Door<br>DELAYONOFFNO Industrial ++ DIST. + PD112 Sensor<br>X<br>Y<br>Object direction<br>50 mm<br>Detectable area<br>**----- End of picture text -----**<br>


- **X** = Distance to background 

- **Y** = Object distance (min.) from background 

   - = Detectable objects 

   - = Not detectable objects 

Specifications are subject to change without notice (13.06.2017) 

**3** 

**PD112CNB25BP..** 

## **Adjustment** 

**==> picture [72 x 72] intentionally omitted <==**

## Background suppression adjustment* 

   1. Align the sensor at the background 

   2. Turn distance calibration screw (28 turns) counter clockwise until yellow led turns OFF 

1. Align the sensor at the background 

2. Turn distance calibration screw (28 turns) clockwise until yellow led is ON 

   3. Turn distance calibration screw (28 turns) clockwise until yellow led turns ON 

3. Turn distance calibration screw (28 turns) counter clockwise until yellow led turns OFF 

   4. The object can now be detected 

4. Background is now neglected Object detection adjustment 

- *If no background exists a white cardboard can be used as background. 

## **Dimensions (mm)** 

**==> picture [500 x 231] intentionally omitted <==**

**----- Start of picture text -----**<br>
Cable version Plug version<br>25 Sensor top 1:1 25<br>NC Door<br>NO Industrial<br>DELAY + DIST.<br>ON +<br>+<br>OFF<br>2 x Ø5.2 2 x Ø5.2<br>7.5 7.5<br>30 30<br>45 Output Power 45<br>2.5 2.5<br>112.5 112.5<br>5 5<br>OFF + ON + DIST. + DELAY NOIndustrial NCDoor OFF + ON + DIST. + DELAY NOIndustrial NCDoor<br>**----- End of picture text -----**<br>


## **Installation Hints** 

**==> picture [500 x 150] intentionally omitted <==**

**----- Start of picture text -----**<br>
To avoid interference from inductive voltage / Relief of the cable strain Protection of the sensing face Sensor mounted on a mobile carrier<br>current peaks, separate the proximity switch<br>cables from any other power cables. E.g.<br>Engine, contactor or solenoid cables<br>Incorrect<br>Incorrect<br>Incorrect Correct<br>Correct<br>> 100 mm<br>The cable should not be pulled A proximity switch should not serve Any repetitive flexing of the<br>as mechanical stop cable should be avoided<br>**----- End of picture text -----**<br>


## **Deliver Contents y** 

- Photoelectric switch: PD 112 CNB 25 BP.. 

## **Accessories** 

   - Connector type CONB15NF... series 

- Screwdriver for adjustment: 77-005 

- Installation instruction 

- **Packaging:** Cardboard box 

Specifications are subject to change without notice (13.06.2017) 

**4**