PCR1D681MCL1GS

**CONDUCTIVE  POLYMER  ALUMINUM  SOLID  ELECTROLYTIC  CAPACITORS** 

## **PCR** 

Chip Type, High Reliability 

High reliability, High voltage (to 80V). Low ESR, High ripple current. **PCH** Long life of 4000 hours at 125°C. **PCZ** SMD type : Lead free reflow soldering condition at ~~2~~ 6 ~~0~~ °C peak complete correspondence. High : Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). (tT Temperature es ESR after Endurance at -40°C.AEC-Q200 Qualified. Please contact us for details. **PCM** Long Life **PCR** High CapacitanceLong Life Assurance **PCX** : Specifications J aa Item Performance Characteristics ~~es re~~ Category Temperature Range –55 to +125°C Rated Voltage Range 16 to 80V ~~ee~~ Rated Capacitance Range 22 to 1000µF ~~es~~ Capacitance Tolerance ± 20%   at 120Hz, 20°C ~~es~~ Tangent of loss angle (tan δ) Less than or equal to the specified value at 120Hz, 20°C ~~a~~ ESR[ (] 1) Less than or equal to the specified value at 100kHz, 20°C Leakage Current ( 2) After 2 minutes' application of rated voltage, leakage current is not more than 0.03CV. Temperature Characteristics Z(+125°C) / Z(+20°C) 1.25       (100kHz) (Max.Impedance Ratio) Z(– 55°C) / Z(+20°C) 1.25 Capacitance change Within ± 20% of initial capacitance value ( 3) The specifications listed at right shall be met when the tan δ 150% or less of the initial specified value Endurance capacitors are restored to 20°C after  the rated voltage is applied for 4000 hours at 125°C. ESR ( 1) 200% or less of the initial specified value ~~Se~~ Leakage current ( 2) Less than or equal to the initial specified value ~~i~~ Shelf Life After storing the capacitors under no load at 125°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. ~~a~~ ESR after Endurance[ (] 1) Less than or equal to the specified value at 100kHz, -40°C Capacitance change Within ± 20% of initial capacitance value ( 3) Damp Heat The specifications listed at right shall be met when the tan δ 150% or less of the initial specified value (Steady State) capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 85°C, 85% RH. ESR ( 1) 200% or less of the initial specified value ~~a~~ Leakage current ( 2) Less than or equal to the initial specified value ~~SS~~ After soldering the capacitor under the soldering conditions prescribed here, the capacitor shall meet the specifications listed at right. Pre-heating shall be done at 150 to 200°C and for 60 to 180 sec. Capacitance change Within ± 10% of the initial capacitance value ( 3) Resistance to The duration for over +230°C temperature at capacitor surface shall tan δ 130% or less than the initial specified value Soldering Heat not exceed 60 seconds. ESR ( 1) 130% or less than the initial specified value In case peak temperature is 260°C or less, reflow soldering shall be ~~Se~~ Leakage current ( 2) Less than or equal to the initial specified value two times maximum. Measurement for solder temperature profile shall be made at the capacitor top. ~~Ee~~ Marking Navy blue print on the case top ~~a~~ 1  ESR should be measured at both of the terminal ends closest where the terminals ※ I : Leakage Current(µA), C : Rated Capacitance(µF), V : Rated Voltage(V) protrude through the plastic platform. Type numbering system  (Example : 35V 150µF) 2  Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120 minutes at 105°C. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 . 3  Initial value : The value before test of examination of resistance to soldering. P C R 1 cocoon V 1 5 1 M C oo L 1 G S Taping code Dimensions Size code ~~r~~ Standard y ® Positive | Configuration Capacitance Lot No. Plastic platform0.3 max. C±0.2 Capacitance tolerance (±20%) Configuration Code Rated capacitance (150µF) Standard L Rated voltage (35V) Vibration Please ask for Series name Resistance Part Number. Type _| Standard (mm) Vibration Resistance (mm) Series =) Voltage (V:35V) oe— L +0.1-0.4 te(ie H Negative [ SizeφD [ φ88.0 × 7L [ φ88.0 × 10L [| φ88.0 × 12L fF φ1010.0 × 8L ft φ10 ×10L10.0 ft φ10×12.7L10.0 | SizeφD φ8×10.5L8.0 φ10×10.5L10.0 φ10 ×13.2L10.0 -—1 LNs ~~+~~ L 6.9 9.9 11.9 7.9 9.9 12.6 L 10.0 10.0 12.7 Vibration Resistance ) & Positive i A 9.0 9.0 9.0 11.0 11.0 11.0 A 9.0 11.0 11.0 Plastic platform a B 8.3 8.3 8.3 10.3 10.3 10.3 B 8.3 10.3 10.3 Capacitance Lot No. 0.3 max. C±0.2 C 8.3 8.3 8.3 10.3 10.3 10.3 C 8.3 10.3 10.3 E 3.2 3.2 3.2 4.6 4.6 4.6 E 3.1 4.6 4.6 H 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 H 1.1 to 1.5 1.1 to 1.5 1.1 to 1.5 Voltage Frequency coefficient of rated ripple current V 16 20 25 35 50 63 80 Frequency 120Hz 1kHz 10kHz 100kHz or more A [f ~~m~~ i | ~~ne~~ Code C D E V H J K Coefficient 0.05 0.30 0.70 1.00 fon Series ° Voltage (V:35V) ~~a~~ L±0.5 ~~S~~ ef ~~ae~~ H ~~|~~ Negative HH ~~:FR~~ φ8×10L(φ EHH-EH 8×10.5L), φ10×10L(φ10×10.5L) ~~EF~~ , φ10×12.7L ~~-F-4-F~~ (φ10×13.2L) ~~+~~ : The vibration structure-resistant product is also available upon request, please ask for details. ~~*~~ Dimension table in next page. ~ Aid electrode (   ) : Size of the vibration structure-resistant product. 

7 CAT.8100N 

**CONDUCTIVE  POLYMER  ALUMINUM  SOLID  ELECTROLYTIC  CAPACITORS** 

## **PCR** 

## Dimensions 

**==> picture [512 x 46] intentionally omitted <==**

**----- Start of picture text -----**<br>
Low temp.<br>Rated Voltage Surge  Rated Case Size Leakage Current Initial ESR after Rated Ripple<br>（V） Voltage Capacitance tan δ （µA） ESR (mΩ)  Endurance （mArms） Part Number<br>（code） (V) （µF） φD×L（mm） （ at 20℃ after 2 minutes ）（20℃/100kHz）（−40℃/100kHz）(mΩ) （125℃/100kHz）<br>**----- End of picture text -----**<br>


|Rated Voltage<br>（V）<br>（code）|Surge<br>Voltage<br>(V)|Rated<br>Capacitance<br>（µF）|Case Size<br>φD×L（mm）|tanδ<br>|Leakage Current<br>（µA）<br>（<br>at 20℃ after<br>2 minutes ）|Initial<br>ESR (mΩ)<br>（20℃/100kHz）<br><br>|Low temp.<br>ESR after<br>Endurance<br>(mΩ)<br>（−40℃/100kHz）<br>|Rated Ripple<br>（mArms）<br>（125℃/100kHz）|Part Number|
|---|---|---|---|---|---|---|---|---|---|
|||||||||||
|16<br>（1C）|20|220|8×7|0.08|105|30|60|1500|PCR1C221MCL1GS|
|||470|▲8×10|0.08|225|17|34|3400|PCR1C471MCL6GS|
|||470|10×8|0.08|225|32|64|2200|PCR1C471MCL1GS|
|||560|8×12|0.08|268|16|32|3800|PCR1C561MCL1GS|
|||680|10×10|0.08|326|19|38|3200|PCR1C681MCL1GS|
|||1000|10×12.7|0.08|480|13|26|4300|PCR1C102MCL1GS|
|20<br>（1D）|25|150|8×7|0.08|90|39|78|1200|PCR1D151MCL1GS|
|||330|▲8×10|0.08|198|19|38|3300|PCR1D331MCL6GS|
|||330|10×8|0.08|198|33|66|2100|PCR1D331MCL1GS|
|||470|8×12|0.08|282|18|36|3500|PCR1D471MCL1GS|
|||560|10×10|0.08|336|20|40|3100|PCR1D561MCL1GS|
|||680|10×12.7|0.08|408|14|28|4200|PCR1D681MCL1GS|
|25<br>（1E）|31|100|8×7|0.08|75|41|82|1200|PCR1E101MCL1GS|
|||220|▲8×10|0.08|165|20|40|3200|PCR1E221MCL6GS|
|||220|10×8|0.08|165|33|66|2100|PCR1E221MCL1GS|
|||270|8×12|0.08|202|19|38|3300|PCR1E271MCL1GS|
|||330|10×10|0.08|247|20|40|3100|PCR1E331MCL1GS|
|||470|10×12.7|0.08|352|15|30|4100|PCR1E471MCL1GS|
|35<br>（1V）|43|68|8×7|0.08|71|44|88|1200|PCR1V680MCL1GS|
|||150|▲8×10|0.08|157|22|44|3100|PCR1V151MCL6GS|
|||150|10×8|0.08|157|33|66|2100|PCR1V151MCL1GS|
|||220|8×12|0.08|231|21|42|3300|PCR1V221MCL1GS|
|||270|10×10|0.08|283|20|40|3100|PCR1V271MCL1GS|
|||330|10×12.7|0.08|346|16|32|3900|PCR1V331MCL1GS|
|50<br>（1H）|63|39|8×7|0.08|58|45|90|1300|PCR1H390MCL1GS|
|||82|▲8×10|0.08|123|26|52|2900|PCR1H820MCL6GS|
|||82|10×8|0.08|123|42|84|1900|PCR1H820MCL1GS|
|||120|△8×12|0.08|180|25|50|2900|PCR1H121MCL2GS|
|||120|10×10|0.08|180|25|50|3000|PCR1H121MCL1GS|
|||180|10×12.7|0.08|270|19|38|3500|PCR1H181MCL1GS|
|63<br>（1J）|79|22|8×7|0.08|41|48|96|1100|PCR1J220MCL1GS|
|||39|8×10|0.08|73|28|56|2700|PCR1J390MCL1GS|
|||47|10×8|0.08|88|47|94|1800|PCR1J470MCL1GS|
|||56|8×12|0.08|105|27|54|2900|PCR1J560MCL1GS|
|||68|10×10|0.08|128|28|56|2800|PCR1J680MCL1GS|
|||100|10×12.7|0.08|189|24|48|3000|PCR1J101MCL1GS|
|80<br>（1K）|100|27|8×10|0.08|64|38|76|1400|PCR1K270MCL1GS|
|||39|8×12|0.08|93|35|70|1600|PCR1K390MCL1GS|
|||47|10×10|0.08|112|33|66|1700|PCR1K470MCL1GS|
|||68|10×12.7|0.08|163|28|56|2100|PCR1K680MCL1GS|



No marked, 1 will be put at 12th digit of type numbering system. : In this case, 2 will be put at 12th digit of type numbering system. : In this case, 6 will be put at 12th digit of type numbering system. 

For taping specifications, recommended land size/soldering by reflow and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. 

CAT.8100N