PCL0J331MCL1GS

**CONDUCTIVE  POLYMER  ALUMINUM  SOLID  ELE** ~~**C**~~ **TROLYTIC  CAPACITORS** 

> Chip Type,  Higher Capacitance **NEW** LongLife Assurance **PCL** ~~So [ZIF~~ I ~~L yA~~ Long life of 20000 hours at 105°C. High reliability, Low ESR, High ripple current. SMD type : Lead free reflow soldering condition at e@ 260°C peak correspondence. Ke —_ Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). AEC-Q200 compliant. Please contact us for details. **PCL** Long Life **PCS** CO 

|_| Specifications ~~Ge~~ Item Performance Characteristics Category Temperature Range –55 to +105°C ~~Gn~~ Rated Voltage Range 4 to 25V ~~Ge~~ Rated Capacitance Range 12 to 2700µF ~~Ga~~ Capacitance Tolerance ± 20%   at 120Hz, 20°C Tangent of loss angle (tan δ) Less than or equal to the specified value at 120Hz, 20°C ~~rs~~ ESR[ (] 1) Less than or equal to the specified value at 100kHz, 20°C ~~a~~ Leakage Current ( 2) Less than or equal to the specified value .    After 2 minutes' application of rated voltage at 20°C ~~Se~~ Temperature Characteristics Z+105°C / Z+20°C 1.25       (100kHz) (Max.Impedance Ratio) Z– 55°C / Z+20°C 1.25 Capacitance change Within ± 20% of the initial capacitance value ( 3) The specifications listed at right shall be met when the tan δ 150% or less than the initial specified value Endurance applied for 20000 hours at 105°C.capacitors are restored to 20°C after the rated voltage is ESR ( 1) 150% or less than the initial specified value Leakage current ( 2) Less than or equal to the initial specified value ~~|~~ Capacitance change Within ± 20% of the initial capacitance value ( 3) Damp Heat The specifications listed at right shall be met when the ~~a~~ tan δ 150% or less than the initial specified value (Steady State) capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60°C, 90% RH. ~~a~~ ESR ( ~~a~~ 1) 150% or less than the initial specified value ~~a~~ Leakage current ( 2) Less than or equal to the initial specified value ~~|~~ After soldering the capacitor under the soldering conditions prescribed here, the capacitor shall meet the specifications listed at a Capacitance change Within ± 10% of the initial capacitance value ( 3) right. tan δ 130% or less than the initial specified value Pre-heating shall be done at 150 to 200°C and for 60 to 180 sec. ESR ( 1) 130% or less than the initial specified value The duration for over +230°C temperature at capacitor surface shall Leakage current ( 2) Less than or equal to the initial specified value Resistance to not exceed 60 seconds. Soldering Heat In case peak temperature is 250°C or less, reflow soldering shall be two times maximum. In case peak temperature is 260°C or less, reflow soldering shall be once. Measurement for solder temperature profile shall be made at the capacitor top. ~~jf == |~~ Marking Navy blue print on the case top 

1  ESR should be measured at both of the terminal ends closest where the terminals protrude through the plastic platform. 2  Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120 minutes at 105°C. 

3  Initial value : The value before test of examination of resistance to soldering. 

## Dimensions 

Positive Plastic platform Capacitance Lot No. a 0.3 MAX. C±0.2 =a Ee rotSS || SO \ Ale Series Voltage ( C:16V) φ5,6.3: L±0.3 H Negative |__] φ8,10: L ±0.5 Ih ~~Xe~~ (mm) aa Size φ5 × 6L φ6.3 × 6L φ8 × 7L φ8 × 10L φ8 × 12L φ10 × 10L φ10 × 12.7L ~~a~~ φD ~~CO~~ 5.0 6.3 8.0 8.0 8.0 10.0 10.0 L 5.9 5.9 6.9 9.9 11.9 9.9 12.6 ~~**a**~~ A ~~sO~~ 6.0 ~~OC~~ 7.3 9.0 9.0 9.0 11.0 11.0 ~~a~~ B ~~sO~~ 5.3 6.6 8.3 8.3 8.3 10.3 10.3 ~~a~~ C 5.3 ~~sO~~ 6.6 8.3 8.3 8.3 10.3 10.3 E 1.6 2.1 3.2 3.2 3.2 4.6 4.6 ~~**a**~~ H 0.5 to 0.8 ~~CO~~ 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 

**==> picture [227 x 210] intentionally omitted <==**

**----- Start of picture text -----**<br>
Type numbering system  (Example : 16V 120µF)<br>1 2 3 4 5 6 7 8 9 10 11 12 13 14<br>P C L LOILLT 1 C 1 2 1 M C L 1 G S<br>Taping code<br>Size code<br>Configuration<br>= Capacitance tolerance (±20%)<br>Rated capacitance (120µF)<br>Rated voltage (16V)<br>Series name<br>Type<br>Voltage<br>V  4  6.3  10  16  20  25<br>a Code  g  j  A  C  D  E<br>e Frequency coefficient of rated ripple current<br>0 Frequency0/  120Hz  1kHz  10kHz  100kHz or more<br>Coefficient  0.05  0.30  0.70  1.00<br>ee<br>**----- End of picture text -----**<br>


Dimension table in next page. 

49 

**CONDUCTIVE  POLYMER  ALUMINUM  SOLID  ELECTROLYTIC  CAPACITORS** 

## **PCL** 

## Dimensions 

**==> picture [511 x 453] intentionally omitted <==**

**----- Start of picture text -----**<br>
Rated Voltage(V) Surge Voltage (V) Rated Capacitance(µF) φCase SizeD × L (mm) tan δ Leakage Current(µA)  (mESRΩ) Rated Ripple(mArms) Part Number<br>(code) (at 100kHz 20°C) (105°C / 100kHz)<br>150 5×6  0.12 300 25 2100 PCL0G151MCL1GS<br>180 5×6  0.12 360 25 2300 PCL0G181MCL1GS<br>390 6.3×6  0.12 312 24 2700 PCL0G391MCL1GS<br>4 560 8×7  0.12 448 22 3200 PCL0G561MCL1GS<br>4.6<br>(0G) 1200 8×10  0.12 960 15 5400 PCL0G122MCL1GS<br>1800 8×12  0.12 1440 14 5500 PCL0G182MCL1GS<br>2200 10×10  0.12 1760 12 5400 PCL0G222MCL1GS<br>2700 10×12.7  0.12 2160 11 5600 PCL0G272MCL1GS<br>47 5×6 0.12 148 30 1900 PCL0J470MCL1GS<br>220 6.3×6  0.12 277 22 2500 PCL0J221MCL1GS<br>6.3 330 8×7  0.12 415 14 3900 PCL0J331MCL1GS<br>7.2<br>(0J) 680 8×10  0.12 856 12 4600 PCL0J681MCL1GS<br>1000 8×12  0.12 1260 11 4800 PCL0J102MCL1GS<br>1800 10×12.7  0.12 2268 10 5500 PCL0J182MCL1GS<br>33 5×6  0.12 165 70 1100 PCL1A330MCL1GS<br>68 5×6  0.12 340 30 1900 PCL1A680MCL1GS<br>120 6.3×6  0.12 240 30 2700 PCL1A121MCL1GS<br>10<br>11.5 150 8×7  0.12 300 21 2880 PCL1A151MCL1GS<br>(1A)<br>470 8×10  0.12 940 17 3800 PCL1A471MCL1GS<br>820 10×10  0.12 1640 15 4300 PCL1A821MCL1GS<br>1200 10×12.7  0.12 2400 13 4800 PCL1A122MCL1GS<br>22 5×6  0.12 176 90 1000 PCL1C220MCL1GS<br>39 6.3×6  0.12 124 37 2000 PCL1C390MCL1GS<br>82 6.3×6  0.12 262 30 2700 PCL1C820MCL1GS<br>16 120 8×7  0.12 384 27 2900 PCL1C121MCL1GS<br>18.4<br>(1C) 270 8×10  0.12 864 20 3600 PCL1C271MCL1GS<br>390 8×12  0.12 1248 18 3900 PCL1C391MCL1GS<br>470 10×10  0.12 1504 16 4200 PCL1C471MCL1GS<br>680 10×12.7 0.12 2176 14 4700 PCL1C681MCL1GS<br>27 6.3×6 0.12 108 60 1400 PCL1D270MCL1GS<br>20 39 8×7 0.12 156 45 2000 PCL1D390MCL1GS<br>23.0<br>(1D) 100 8×12 0.12 400 22 3200 PCL1D101MCL1GS<br>180 10×12.7 0.12 720 20 4300 PCL1D181MCL1GS<br>12 6.3×6 0.12 100 70 1200 PCL1E120MCL1GS<br>25 33 8×10 0.12 165 50 2000 PCL1E330MCL1GS<br>28.7<br>(1E) 56 10×10 0.12 280 45 2200 PCL1E560MCL1GS<br>82 10×12.7 0.12 410 30 3800 PCL1E820MCL1GS<br>**----- End of picture text -----**<br>


Taping specifications are given in page 23. 

Recommended land size, soldering by reflow are given in page 18, 19. Please refer to page 3 for the minimum order quantity. 

50