PCK0J331MCO1GS

**CONDUCTIVE  POLYMER  ALUMINUM  SOLID  ELECTROLYTIC  CAPACITORS** 

## **PCK** 

Chip Type, Ultra-low ESR 

Ultra-low ESR, Higher Capacitance, High ripple current. Load life of 2000 hours at 105°C. 

SMD type : Lead free reflow soldering condition at 260°C peak correspondence. 

Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). AEC-Q200 compliant. Please contact us for details. 

**PCJ** Low ESR **PCK** ~~a~~ 

|Item<br>~~Me~~<br>~~Rs~~|Performance Characteristics<br>~~Me~~|
|---|---|
|Category Temperature Range<br>~~Rs~~<br>~~Rs~~|–55 to +105°C<br>|
|Rated Voltage Range<br>~~Rs~~<br>~~Rs~~|2.5 to 6.3V<br>|
|Rated Capacitance Range<br>~~Rs|~~<br>~~es~~|220 to 2200µF<br>~~|~~|
|Capacitance Tolerance<br>~~|~~<br>~~es~~<br>~~=~~|± 20%   at 120Hz,20°C<br>~~|~~<br>~~TI~~|
|Tangent of loss angle(tanδ)<br>~~es~~<br>~~=~~<br>~~SSWSTTT7+._1]~~|Less than or equal to the specified value at 120Hz, 20°C<br>~~TI~~<br>~~SSWSTTT7+._1]~~|
|ESR(<br>1)<br>~~=~~<br>~~SSWSTTT7+._1]~~|Less than or equal to the specified value at 100kHz, 20°C<br>~~TI~~<br>~~SSWSTTT7+._1]~~|
|Leakage Current (<br>2)<br>~~=~~<br>~~a~~<br>~~ee~~|Less than or equal to the specified value .    After 2 minutes' application of rated voltage at 20°C<br>~~TI~~<br>~~a~~|
|Temperature Characteristics<br>(Max.Impedance Ratio)<br>~~a~~<br>~~ee~~|Z+105°C / Z+20°C<br>1.25       (100kHz)<br>Z–55°C / Z+20°C<br>1.25<br>~~a~~|
|Endurance<br>~~ee ~~|The specifications listed at right shall be met when the<br>capacitors are restored to 20°C after the rated voltage is<br>applied for 2000 hours at 105°C.<br>Capacitance change<br>tanδ<br>Leakage current (<br>2)<br>ESR (<br>1)<br>Within ± 20% of the initial capacitance value(<br>3)<br>150% or less than the initial specified value<br>150% or less than the initial specified value<br>Less than or equal to the initial specified value<br> ~~a~~<br>~~a~~|
|Damp Heat<br>(Steady State)|The specifications listed at right shall be met when the<br>capacitors are restored to 20°C after the rated voltage is<br>applied for 1000 hours at 60°C, 90% RH.<br>Capacitance change<br>tanδ<br>Leakage current (<br>2)<br>ESR (<br>1)<br>Within ± 20% of the initial capacitance value(<br>3)<br>150% or less than the initial specified value<br>150% or less than the initial specified value<br>Less than or equal to the initial specified value<br>~~a~~|
|Resistance to<br>Soldering Heat<br>||After soldering the capacitor under the soldering conditions<br>prescribed here, the capacitor shall meet the specifications listed at<br>right.<br>Pre-heating shall be done at 150 to 200°C and for 60 to 180 sec.<br>The duration for over +230°C temperature at capacitor surface shall<br>not exceed 60 seconds.<br>In case peak temperature is 250°C or less, reflow soldering shall be<br>two times maximum.<br>In case peak temperature is 260°C or less, reflow soldering shall be<br>once.<br>Measurement for solder temperature profile shall be made at the<br>capacitor top.<br>Capacitance change<br>tanδ<br>Leakage current (<br>2)<br>ESR (<br>1)<br>Within ± 10% of the initial capacitance value(<br>3)<br>130% or less than the initial specified value<br>130% or less than the initial specified value<br>Less than or equal to the initial specified value<br>~~=~~<br>~~[oe~~|
|Marking<br>~~a~~|Navy blue print on the case top|



- 1  ESR should be measured at both of the terminal ends closest where the terminals protrude through the plastic platform. 

2  Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120 minutes at 105°C. 

3  Initial value : The value before test of examination of resistance to soldering. 

**==> picture [510 x 239] intentionally omitted <==**

**----- Start of picture text -----**<br>
Dimensions Positive Type numbering system  (Example : 6.3V 220µF)<br>Plastic platform 1 2 3 4 5 6 7 8 9 10 11 12 13 14<br>Capacitance Lot No. 0.3 MAX. C±0.2 P C K 0 J 2 2 1 M C O 1 G S<br>6 — | OCoO<br>Taping code<br>Configuration<br>[oneia) LL Capacitance tolerance (±20%)<br>Series Voltage ( j:6.3v) |__ L +0.1-0.4 Ih H ce Negative Rated capacitance (220µF)<br>Rated voltage (6.3V)<br>Series name<br>Type<br> (mm)<br>Size φ6.3 × 6L φ8 × 7L φ10 × 8L φ10 × 10L<br>φD 6.3 8.0 10.0 10.0<br>L 5.9 6.9 7.9 9.9<br>A 7.3 9.0 11.0 11.0<br>B 6.6 8.3 10.3 10.3 Voltage<br>C 6.6 8.3 10.3 10.3 Frequency coefficient of rated ripple current<br>V  2.5  4  6.3<br>E 2.1 3.2 4.6 4.6 0 Frequency0/  120Hz  1kHz  10kHz  100kHz or more<br>H 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 Code  e  g  j Coefficient  0.05  0.30  0.70  1.00<br>BESS Fit eee eee<br>fen Dimension table in next page. C........ CAT.8100K |<br>0.5 MAX.<br>0 1<br>K 2 4 E<br>C 2 j 9 D±0.5φ B±0.2 A±0.2<br>**----- End of picture text -----**<br>


C........ CAT.8100K | 

**CONDUCTIVE  POLYMER  ALUMINUM  SOLID  ELECTROLYTIC  CAPACITORS** 

## **PCK** 

## Dimensions 

**==> picture [512 x 199] intentionally omitted <==**

**----- Start of picture text -----**<br>
Rated Voltage(V) Surge Voltage (V) Rated Capacitance(µF) φCase SizeD × L (mm) tan δ Leakage Currentat 20°(µA)C  after  (mESRΩ) Rated Ripple(mArms) Part Number<br>(code) ( 2 minutes ) (20°C/100kHz) (105°C/100kHz)<br>390  6.3 × 6    0.12 293 10 3900 PCK0E391MCO1GS<br>560  8 × 7 0.12 420 9 4500 PCK0E561MCO1GS<br>2.5<br>2.8 680  8 × 7 0.12 510 9 4500 PCK0E681MCO1GS<br>(0E)<br>1200  10 × 8   0.12 900 9 5000 PCK0E122MCO1GS<br>2200  10 × 10 0.12 1650 8 6000 PCK0E222MCO1GS<br>330  6.3 × 6    0.12 396 10 3900 PCK0G331MCO1GS<br>470  8 × 7 0.12 564 9 4500 PCK0G471MCO1GS<br>4<br>4.6 560  8 × 7 0.12 672 9 4500 PCK0G561MCO1GS<br>(0G)<br>1000    10 × 8     0.12 1200 9 5000 PCK0G102MCO1GS<br>1800  10 × 10 0.12 2160 8 6000 PCK0G182MCO1GS<br>220  6.3 × 6    0.12 416 10 3900 PCK0J221MCO1GS<br>330  8 × 7 0.12 624 9 4500 PCK0J331MCO1GS<br>6.3<br>7.2 390  8 × 7 0.12 737 9 4500 PCK0J391MCO1GS<br>(0J)<br>820  10 × 8   0.12 1550 9 5000 PCK0J821MCO1GS<br>1500  10 × 10 0.12 2835 8 6000 PCK0J152MCO1GS<br>**----- End of picture text -----**<br>


For taping specifications, recommended land size/soldering by reflow and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. 

CAT.8100K