PCJ1A681MCL1GS

**CONDUCTIVE  POLYMER  ALUMINUM  SOLID  ELECTROLYTIC  CAPACITORS** 

**==> picture [513 x 737] intentionally omitted <==**

**----- Start of picture text -----**<br>
Chip Type, Low ESR,<br>Higher Capacitance<br>CJ series L S age<br>CK<br>Low ESR, Higher Capacitance, High ripple current.Load life of 2000 hours at 105°C. Low ESR<br>SMD type : Lead free reflow soldering condition at<br>260°C peak correspondence. CJ<br>: Compliant to the RoHS directive (2002/95/EC). «q:<br>o_o<br>Low ESR<br>Higher<br>Capacitance,<br>CF<br>|_| Specifications<br>Item Performance Characteristics<br>Category Temperature Range –55 to +105°C<br>a<br>a Rated Voltage Range 2.5 to 16V<br>Rated Capacitance Range 33 to 2700µF<br>es<br>| Capacitance Tolerance ±20%   at 120Hz, 20°C<br>Tangent of loss angle (tan δ) Less than or equal to the specified value at 120Hz, 20°C<br>ns<br>a ESR [(] 1) Less than or equal to the specified value at 100kHz, 20°C<br>Leakage Current ( 2) Less than or equal to the specified value .    After 2 minutes' application of rated voltage at 20°C<br>Temperature Characteristics Z+105°C / Z+20°C  1.25       (100kHz)<br>(Max.Impedance Ratio) Z– 55°C / Z+20°C  1.25<br>Capacitance change Within ± 20% of the initial capacitance value ( 3)<br>Endurance The specifications listed at right shall be met when thecapacitors are restored to 20°C after the rated voltage is ee tan ESRδ ( 1) 150% or less than the initial specified value150% or less than the initial specified value<br>applied for 2000 hours at 105°C.<br>eS Leakage current ( 2) Less than or equal to the initial specified value<br>a<br>Capacitance change Within ± 20% of the initial capacitance value ( 3)<br>Damp Heat The specifications listed at right shall be met when the tan δ 150% or less than the initial specified value<br>(Steady State) capacitors are restored to 20°C after the rated voltage is a ESR ( 1) 150% or less than the initial specified value<br>applied for 1000 hours at 60°C, 90% RH.<br>a Leakage current ( 2) Less than or equal to the initial specified value<br>a<br>After soldering the capacitor under the soldering conditions<br>prescribed here, the capacitor shall meet the specifications listed at Capacitance change Within ± 10% of the initial capacitance value ( 3)<br>right, provided that it's temperature profile is measured at the tan δ 130% or less than the initial specified value<br>capacitor top and the terminal.Pre-heating shall be done at 150 to 200°C and for 60 to 180 sec. ee ESR ( 1) 130% or less than the initial specified value<br>Resistance to  The duration for over +230°C temperature at capacitor surface shall ed Leakage current ( 2) Less than or equal to the initial specified value<br>not exceed 60 seconds.<br>Soldering Heat In the case of peak temp, less than 250°C, reflow soldering shall be<br>two times maximum.<br>In the case of peak temp, less than 260°C, reflow soldering shall be<br>once.<br>Measurement for solder temperature profile shall be made at the<br>| capacitor top and the terminal. =<br>Marking Navy blue print on the case top<br>es<br>1  ESR should be measured at both of the terminal ends closest where the terminals protrude through the plastic platform.<br>2  Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120<br>minutes at 105°C.<br>3  Initial value : The value before test of examination of resistance to soldering.<br>|_| Dimensions Type numbering system  (Example : 6.3V 220µF)<br>1 2 3 4 5 6 7 8 9 10 11 12 13 14<br>Positive<br>P C J 0 J 2 2 1 M C L 1 G S<br>Plastic platform £ CT ILL.) [J<br>Capacitance Lot No. = 0.3 MAX. C±0.2 Taping code _<br>Size code<br>Configuration<br>aa Capacitance toleranc (±20%)<br>| ricso| [-——. Rated capacitance (220µF)<br>Series . Voltage ( j:6.3v) LEPoo L +0.1-0.4 EN(le G Negative Rated voltageSeries name (6.3V)<br>H<br>Type<br>(mm)<br>Se Size φ5 × 6L φ6.3 × 6L φ6.3 × 8L φ8 × 7L φ8 × 8L φ8 × 10L φ8 × 12L φ10 × 8L φ10 × 10L φ10 × 12.7L<br>φD 5.0 6.3 6.3 8.0 8.0 8.0 8.0 10.0 10.0 10.0<br>es a a Oa a<br>L 5.9 5.9 7.9 6.9 7.9 9.9 11.9 7.9 9.9 12.6<br>-<br>A 6.0 7.3 7.3 9.0 9.0 9.0 9.0 11.0 11.0 11.0<br>es Oa a<br>es B 5.3 6.6 6.6 8.3 8.3 8.3 8.3 10.3 10.3 10.3 Voltage<br>a C 5.3 6.6 6.6 8.3 8.3 8.3 8.3 10.3 10.3 10.3 V 2.5 4 6.3 10 16<br>E 1.6 2.1 2.1 3.2 3.2 3.2 3.2 4.6 4.6 4.6<br>aes H 0.5 to 0.8 0.5 to 0.8 Oa 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 -——{ Code e g {| j A —_ C<br>Dimension table in next page. CAT.8100Y<br>fe Cd<br>0.5 MAX.<br>CJ 022 j 148 B0.2± E A0.2±<br>D + 0.5 MAX.φ<br>**----- End of picture text -----**<br>


**CONDUCTIVE  POLYMER  ALUMINUM  SOLID  ELECTROLYTIC  CAPACITORS** 

## **CJ** series 

## Standard Ratings 

**==> picture [512 x 649] intentionally omitted <==**

**----- Start of picture text -----**<br>
Rated Voltage Surge Voltage Rated Capacitance Case Size Leakage Current ESR (mΩ) Rated Ripple<br>(V)(code)  (V) (µF) φD × L (mm) tan δ (µA) (at 100kHz 20°C) (mArms) Part Number<br>180 5 × 6 0.12 90  21 2670 PCJ0E181MCL1GS<br>390 6.3 × 6    0.12 195  15 3400 PCJ0E391MCL1GS<br>470 6.3 × 8    0.12 235  13 3600 PCJ0E471MCL1GS<br>560 6.3 × 8    0.12 280  13 3600 PCJ0E561MCL4GS<br>560 8 × 7 0.12 280  13 4100 PCJ0E561MCL1GS<br>680 8 × 7 0.12 340  13 4100 PCJ0E681MCL1GS<br>2.5 820 8 × 8 0.12 410  12 4260 PCJ0E821MCL6GS<br>(0E) 2.8 820   8 × 12 0.12 410  9 5400 PCJ0E821MCL1GS<br>1000 8 × 8 0.12 500  12 4260 PCJ0E102MCL1GS<br>1200 10 × 8   0.12 600  13 4800 PCJ0E122MCL1GS<br>1500   8 × 10 0.12 750  10 5220 PCJ0E152MCL6GS<br>1500   8 × 12 0.12 750  9 5400 PCJ0E152MCL1GS<br>2200 10 × 10 0.12 1100  10 5500 PCJ0E222MCL1GS<br>2700    10 × 12.7 0.12 1350  9 5800 PCJ0E272MCL1GS<br>100 5 × 6 0.12 80  22 2610 PCJ0G101MCL1GS<br>150 5 × 6 0.12 120  22 2610 PCJ0G151MCL1GS<br>270 6.3 × 6    0.12 216  15 3200 PCJ0G271MCL1GS<br>330 6.3 × 6    0.12 264  15 3300 PCJ0G331MCL1GS<br>390 6.3 × 8    0.12 312  14 3470 PCJ0G391MCL1GS<br>470 8 × 7 0.12 376  14 3950 PCJ0G471MCL1GS<br>560 8 × 7 0.12 448  14 4000 PCJ0G561MCL1GS<br>560   8 × 12 0.12 448  9 5200 PCJ0G561MCL9GS<br>680 8 × 8 0.12 544  13 3950 PCJ0G681MCL1GS<br>4 4.6 1000   8 × 10 0.12 800  10 5220 PCJ0G102MCL4GS<br>(0G) 1000 10 × 8   0.12 800  13 4300 PCJ0G102MCL1GS<br>1200   8 × 12 0.12 960  9 5400 PCJ0G122MCL1GS<br>1200 10 × 10 0.12 960  10 5500 PCJ0G122MCL6GS<br>1500   8 × 12 0.12 1200  9 5200 PCJ0G152MCL4GS<br>1500 10 × 10 0.12 1200  10 5500 PCJ0G152MCL1GS<br>1800 10 × 10 0.12 1440  10 5500 PCJ0G182MCL1GS<br>1800    10 × 12.7 0.12 1440  9 5600 PCJ0G182MCL9GS<br>2200    10 × 12.7 0.12 1760  9 5700 PCJ0G222MCL1GS<br>100 5 × 6 0.12 126  24 2500 PCJ0J101MCL1GS<br>120 5 × 6 0.12 151  24 2500 PCJ0J121MCL1GS<br>220 6.3 × 6    0.12 277  15 3200 PCJ0J221MCL1GS<br>270 6.3 × 8    0.12 340  14 3470 PCJ0J271MCL1GS<br>330 6.3 × 8    0.12 416  14 3470 PCJ0J331MCL4GS<br>330 8 × 7 0.12 416  14 3950 PCJ0J331MCL1GS<br>390 8 × 7 0.12 491  14 3950 PCJ0J391MCL1GS<br>470 8 × 8 0.12 592  13 3950 PCJ0J471MCL1GS<br>6.3 7.2 820   8 × 10 0.12 1033  12 4770 PCJ0J821MCL6GS<br>(0J) 820   8 × 12 0.12 1033  10 5150 PCJ0J821MCL4GS<br>820 10 × 8   0.12 1033  13 4500 PCJ0J821MCL1GS<br>1200 10 × 10 0.12 1512  12 5025 PCJ0J122MCL1GS<br>1500 10 × 10 0.12 1890  12 5025 PCJ0J152MCL1GS<br>1500    10 × 12.7 0.12 1890  10 5500 PCJ0J152MCL9GS<br>1800    10 × 12.7 0.12 2268  11 5200 PCJ0J182MCL1GS<br>47 5 × 6 0.12 94  28 2310 PCJ1A470MCL1GS<br>56 5 × 6 0.12 112  28 2310 PCJ1A560MCL1GS<br>68 5 × 6 0.12 136  28 2310 PCJ1A680MCL1GS<br>120 6.3 × 6    0.12 240  25 2530 PCJ1A121MCL1GS<br>150 6.3 × 8    0.12 300  21 2880 PCJ1A151MCL1GS<br>220 8 × 7 0.12 440  21 3220 PCJ1A221MCL1GS<br>10 270 8 × 7 0.12 540  21 3220 PCJ1A271MCL1GS<br>11.5<br>(1A) 330 8 × 8 0.12 660  19 3390 PCJ1A331MCL1GS<br>390   8 × 10 0.12 780  17 4000 PCJ1A391MCL1GS<br>470 10 × 8   0.12 940  19 3800 PCJ1A471MCL1GS<br>680 10 × 10 0.12 1360  13 4820 PCJ1A681MCL1GS<br>33 5 × 6 0.12 105  35 2070 PCJ1C330MCL1GS<br>39 5 × 6 0.12 125  35 2070 PCJ1C390MCL1GS<br>68 6.3 × 6    0.12 217  28 2390 PCJ1C680MCL1GS<br>82 6.3 × 8    0.12 262  24 2700 PCJ1C820MCL1GS<br>100 6.3 × 8    0.12 320  24 2700 PCJ1C101MCL4GS<br>100 8 × 7 0.12 320  24 3010 PCJ1C101MCL1GS<br>16<br>18.4 120 8 × 7 0.12 384  24 3010 PCJ1C121MCL1GS<br>(1C) 150 8 × 8 0.12 480  22 3150 PCJ1C151MCL1GS<br>180   8 × 10 0.12 576  18 3890 PCJ1C181MCL1GS<br>220   8 × 10 0.12 704  18 3890 PCJ1C221MCL4GS<br>220 10 × 8   0.12 704  22 3450 PCJ1C221MCL1GS<br>270   8 × 12 0.12 864  16 4070 PCJ1C271MCL1GS<br>330 10 × 10 0.12 1056  16 4350 PCJ1C331MCL1GS<br>**----- End of picture text -----**<br>


Rated ripple current  (mArms) at 105°C 100kHz 

Taping specifications are given in page 23. Recommended land size, soldering by reflow are given in page 18, 19. Please refer to page 3 for the minimum order quantity. 

No marked, 1 will be put at 12th digit of type numbering system. : In this case, 4 will be put at 12th digit of type numbering system. : In this case, 6 will be put at 12th digit of type numbering system. : In this case, 9 will be put at 12th digit of type numbering system. 

CAT.8100Y