PCH1D331MCL6GS

**CONDUCTIVE  POLYMER  ALUMINUM  SOLID  ELECTROLYTIC  CAPACITORS** 

## **PCH** 

Chip Type, Higher Capacitance High Temperature Range **PCH** ~~WBe~~ ee High reliability, High voltage (to 80V). ° Low ESR, High ripple current.Long life of 4000 hours at 135°C. **PCZ** HighTemperature Current **PCH** Frequency HighTemperature **PCR** Feature : SMD type : Lead free reflow soldering conditi ~~o~~ n at o ~~e~~ @ & 260°C peak complete correspondence. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). : ESR after Endurance at -40°C.AEC-Q200 compliant. Please contact us for details. er) | | Specifications Item Performance Characteristics ~~|~~ Category Temperature Range –55 to +135°C Rated Voltage Range 16 to 80V ~~es ns~~ Rated Capacitance Range 12 to 1000µF ~~|~~ Capacitance Tolerance ± 20%   at 120Hz, 20°C ~~a~~ Tangent of loss angle (tan δ) Less than or equal to the specified value at 120Hz, 20°C ESR[ (] 1) Less than or equal to the specified value at 100kHz, 20°C ~~es~~ Leakage Current ( 2) After 2 minutes' application of rated voltage, leakage current is not more than 0.03CV or 3(µA), whichever is greater. Temperature Characteristics Z(– 55°C) / Z(+20°C) 1.25       (100kHz) (Max.Impedance Ratio) Capacitance change Within ± 20% of initial capacitance value ( 3) The specifications listed at right shall be met when the tan δ 150% or less of the initial specified value Endurance capacitors are restored to 20°C after  the rated voltage is applied for 4000 hours at 135°C. ESR ( 1) 200% or less of the initial specified value ~~ee~~ Leakage current ( 2) Less than or equal to the initial specified value ~~ES~~ Shelf Life After storing the capacitors under no load at 135°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. ~~es~~ ESR after Endurance[ (] 1) Less than or equal to the specified value at 100kHz, -40°C Capacitance change Within ± 20% of initial capacitance value ( 3) Damp Heat The specifications listed at right shall be met when the tan δ 150% or less of the initial specified value (Steady State) capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 85°C, 85% RH. ESR ( 1) 200% or less of the initial specified value ~~Sd~~ Leakage current ( 2) Less than or equal to the initial specified value ~~SS SS~~ After soldering the capacitor under the soldering conditions prescribed here, the capacitor shall meet the specifications listed at right. Pre-heating shall be done at 150 to 200°C and for 60 to 180 sec. Capacitance change Within ± 10% of the initial capacitance value ( 3) Resistance to The duration for over +230°C temperature at capacitor surface shall tan δ 130% or less than the initial specified value Soldering Heat not exceed 60 seconds.In case peak temperature is 260°C or less, reflow soldering shall be ESR ( 1) 130% or less than the initial specified value two times maximum. ~~Ss~~ Leakage current ( 2) Less than or equal to the initial specified value Measurement for solder temperature profile shall be made at the ~~a~~ capacitor top. ~~—— ——~~ Marking Navy blue print on the case top ~~J~~ 1  ESR should be measured at both of the terminal ends closest where the terminals ※ I : Leakage Current(µA), C : Rated Capacitance(µF), V : Rated Voltage(V) protrude through the plastic platform. 

> protrude through the plastic platform. Type numbering system  (Example : 35V 150µF) 2  Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120 minutes at 105°C. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 se 3  Initial value : The value before test of examination of resistance to soldering. P C H 1 LILIT)] V 1 5 1 M C Co L 1 G S Taping code Dimensions Size code . Standard Positive L—— Configuration 

> Capacitance Lot No. Plastic platform0.3 max. C±0.2 Capacitance tolerance (±20%)Rated capacitance (150µF) StandardSize CodeL ~~_~~ | ~~==~~ Rated voltage (35V) Vibration Resistance S Series name Type | Standard (mm) Vibration Resistance  (mm) Size φ6.3 × 6L φ6.3 × 8L φ8 × 7L φ8 × 10L φ8 × 12L φ10 × 8L φ10 × 10L φ10 × 12.7L Size φ6.3 × 8L φ8 × 10.5L φ10 × 10.5L φ10 × 13.2L _ | (ee | ~~ee~~ Series Voltage (V:35V) φ6.3: L±0.3 H Negative φD 6.3 6.3 8.0 8.0 8.0 10.0 10.0 10.0 φD 6.3 8.0 10.0 10.0 | φ8,10: L±0.5 | _| I ~~3 fF~~ L ~~|~~ 5.9 ~~|~~ 7.9 ~~[|~~ 6.9 | 9.9 ~~ft~~ 11.9 ~~tf~~ 7.9 ~~ft~~ 9.9 12.6 L 7.5 10.0 10.0 12.7 [ Vibration Resistance } —— ’ Positive ~~PEPee~~ AB 7.36.6 7.36.6 9.08.3 9.08.3 9.08.3 11.010.3 11.010.3 11.010.3 AB 7.36.6 9.0 8.3 11.010.3 11.010.3 Plastic platform 

> Capacitance Lot No. 0.3 max. C±0.2 C 6.6 6.6 8.3 8.3 8.3 10.3 10.3 10.3 C 6.6 8.3 10.3 10.3 E 2.1 2.1 3.2 3.2 3.2 4.6 4.6 4.6 E 2.5 3.1 4.6 4.6 H 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 H 0.5 to 0.8 1.1 to 1.5 1.1 to 1.5 1.1 to 1.5 Voltage Frequency coefficient of rated ripple current V 16 20 25 35 50 63 80 Frequency0/ 120Hz 1kHz 10kHz 100kHz or more con Series © Voltage (V:35V) [Le|__[s] L±0.5 ~~[i] S|~~ o[=] o ~~tke[w]~~ H "[o] )NooP Negative ~~Geese[a] FRRREEEEE~~ Code , φ6.3×8LC (D φ6.3×8LE )V ,φ8×10LH (φJ 8×10.5L),K ~~ES~~ Coefficientφ10×10L(φ  0.05 0.30 0.70 10×10.5L),φ10×12.7L( ~~=~~ φ10×13.2L) : 1.00 The vibration structure-resistant product is also available upon request, please ask for details. Aid electrode (   ) : Size of the vibration structure-resistant product. f- Dimension table in next page. —~«d [id CAT.8100L 

**CONDUCTIVE  POLYMER  ALUMINUM  SOLID  ELECTROLYTIC  CAPACITORS** 

## **PCH** 

## Dimensions 

**==> picture [512 x 52] intentionally omitted <==**

**----- Start of picture text -----**<br>
Low temp.<br>Rated Voltage Surge  Rated Case Size Leakage Current Initial ESR after Rated Ripple<br>（V） Voltage Capacitance tan δ （µA） ESR (mΩ)   Endurance （mArms） Part Number<br>（code） (V) （µF） φD×L（mm） （ at 20℃ after 2 minutes ）（20℃/100kHz）（−40℃/100kHz）(mΩ) （135℃/100kHz）<br>120 6.3×6 0.08 57 36 72 900 PCH1C121MCL1GS<br>**----- End of picture text -----**<br>


|Rated Voltage<br>（V）<br>（code）|Surge<br>Voltage<br>(V)|Rated<br>Capacitance<br>（µF）|Case Size<br>φD×L（mm）|tanδ<br>|Leakage Current<br>（µA）<br>（<br>at 20℃ after<br>2 minutes ）|Initial<br>ESR (mΩ)<br>（20℃/100kHz）<br><br>|Low temp.<br>ESR after<br>Endurance<br>(mΩ)<br>（−40℃/100kHz）<br>|Rated Ripple<br>（mArms）<br>（135℃/100kHz）|Part Number|
|---|---|---|---|---|---|---|---|---|---|
|||120|6.3×6|0.08|57|36|72|900|PCH1C121MCL1GS|
|16<br>（1C）|20|220|■6.3×8|0.08|105|23|46|1500|PCH1C221MCL4GS|
|||220|8×7|0.08|105|30|60|1100|PCH1C221MCL1GS|
|||470|▲<br>8×10|0.08|225|17|34|2400|PCH1C471MCL6GS|
|||470|10×8|0.08|225|22|44|1900|PCH1C471MCL1GS|
|||560|8×12|0.08|268|16|32|2700|PCH1C561MCL1GS|
|||680|10×10|0.08|326|19|38|2300|PCH1C681MCL1GS|
|||1000|10×12.7|0.08|480|13|26|2500|PCH1C102MCL1GS|
|20<br>（1D）|25|100|6.3×6|0.08|60|41|82|900|PCH1D101MCL1GS|
|||150|■6.3×8|0.08|90|25|50|1200|PCH1D151MCL4GS|
|||150|8×7|0.08|90|39|78|800|PCH1D151MCL1GS|
|||330|▲<br>8×10|0.08|198|19|38|2300|PCH1D331MCL6GS|
|||330|10×8|0.08|198|23|46|1800|PCH1D331MCL1GS|
|||470|8×12|0.08|282|18|36|2500|PCH1D471MCL1GS|
|||560|10×10|0.08|336|20|40|2200|PCH1D561MCL1GS|
|||680|10×12.7|0.08|408|14|28|3000|PCH1D681MCL1GS|
|25<br>（1E）|31|56|6.3×6|0.08|42|43|86|900|PCH1E560MCL1GS|
|||100|■6.3×8|0.08|75|27|54|1100|PCH1E101MCL4GS|
|||100|8×7|0.08|75|41|82|800|PCH1E101MCL1GS|
|||220|▲<br>8×10|0.08|165|20|40|2300|PCH1E221MCL6GS|
|||220|10×8|0.08|165|24|48|1800|PCH1E221MCL1GS|
|||270|8×12|0.08|202|19|38|2300|PCH1E271MCL1GS|
|||330|10×10|0.08|247|20|40|2200|PCH1E331MCL1GS|
|||470|10×12.7|0.08|352|15|30|2900|PCH1E471MCL1GS|
|35<br>（1V）|43|47|6.3×6|0.08|49|48|96|800|PCH1V470MCL1GS|
|||68|■6.3×8|0.08|71|31|62|1100|PCH1V680MCL4GS|
|||68|8×7|0.08|71|44|88|800|PCH1V680MCL1GS|
|||150|▲<br>8×10|0.08|157|22|44|2200|PCH1V151MCL6GS|
|||150|10×8|0.08|157|25|50|1800|PCH1V151MCL1GS|
|||220|8×12|0.08|231|21|42|2300|PCH1V221MCL1GS|
|||270|10×10|0.08|283|20|40|2200|PCH1V271MCL1GS|
|||330|10×12.7|0.08|346|16|32|2800|PCH1V331MCL1GS|
|50<br>（1H）|63|22|6.3×6|0.08|33|50|100|700|PCH1H220MCL1GS|
|||39|■6.3×8|0.08|58|36|72|900|PCH1H390MCL4GS|
|||39|8×7|0.08|58|45|90|900|PCH1H390MCL1GS|
|||82|▲<br>8×10|0.08|123|26|52|2100|PCH1H820MCL6GS|
|||82|10×8|0.08|123|34|68|1600|PCH1H820MCL1GS|
|||120|△<br>8×12|0.08|180|25|50|2100|PCH1H121MCL2GS|
|||120|10×10|0.08|180|25|50|2100|PCH1H121MCL1GS|
|||180|10×12.7|0.08|270|19|38|2500|PCH1H181MCL1GS|
|63<br>（1J）|79|12|6.3×6|0.08|22|51|102|700|PCH1J120MCL1GS|
|||22|■6.3×8|0.08|41|45|90|800|PCH1J220MCL4GS|
|||22|8×7|0.08|41|48|96|800|PCH1J220MCL1GS|
|||39|8×10|0.08|73|28|56|1900|PCH1J390MCL1GS|
|||47|10×8|0.08|88|35|70|1500|PCH1J470MCL1GS|
|||56|8×12|0.08|105|27|54|2100|PCH1J560MCL1GS|
|||68|10×10|0.08|128|28|56|2000|PCH1J680MCL1GS|
|||100|10×12.7|0.08|189|24|48|2100|PCH1J101MCL1GS|
|80<br>（1K）|100|12|6.3×8|0.08|28|50|100|800|PCH1K120MCL1GS|
|||27|8×10|0.08|64|38|76|1000|PCH1K270MCL1GS|
|||39|8×12|0.08|93|35|70|1100|PCH1K390MCL1GS|
|||47|10×10|0.08|112|33|66|1200|PCH1K470MCL1GS|
|||68|10×12.7|0.08|163|28|56|1500|PCH1K680MCL1GS|



For taping specifications, recommended land size/soldering by reflow and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. 

No marked, 1 will be put at 12th digit of type numbering system. : In this case, 2 will be put at 12th digit of type numbering system. : In this case, 4 will be put at 12th digit of type numbering system. : In this case, 6 will be put at 12th digit of type numbering system. 

CAT.8100L