PCG1C471MCL1GS

**CONDUCTIVE  POLYMER  ALUMINUM  SOLID  ELECTROLYTIC  CAPACITORS** 

**PCG** Chip Type, Higher Capacitance Higher Capacitance, Low ESR, High ripple current. Load life of 2000 hours at 105°C. 

SMD type : Lead free reflow soldering condition at 

260°C peak correspondence. 

Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). AEC-Q200 compliant. Please contact us for details. 

**==> picture [35 x 53] intentionally omitted <==**

**----- Start of picture text -----**<br>
PCG<br>Higher<br>Capacitance<br>PCF<br>**----- End of picture text -----**<br>


~~|~~ Specifications 

~~I~~ Item Performance Characteristics Category Temperature Range –55 to +105°C ~~es~~ Rated Voltage Range 2.5 to 16V ~~ns a~~ Rated Capacitance Range 47 to 4700µF Capacitance Tolerance ± 20%   at 120Hz, 20°C ~~rs~~ Tangent of loss angle (tan δ) Less than or equal to the specified value at 120Hz, 20°C ~~a~~ ESR[ (] 1) Less than or equal to the specified value at 100kHz, 20°C ~~a~~ Leakage Current ( 2) Less than or equal to the specified value.    After 2 minutes' application of rated voltage at 20°C Temperature Characteristics Z(+105°C) / Z(+20°C) 1.25       (100kHz) (Max.Impedance Ratio) Z(– 55°C) / Z(+20°C) 1.25 Capacitance change Within ± 20% of the initial capacitance value ( 3) The specifications listed at right shall be met when the tan δ 150% or less than the initial specified value Endurance capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 105°C. ESR ( 1) 150% or less than the initial specified value ~~a~~ Leakage current ( 2) Less than or equal to the initial specified value ~~|~~ Capacitance change Within ± 20% of the initial capacitance value ( 3) Damp Heat The specifications listed at right shall be met when the tan δ 150% or less than the initial specified value (Steady State) capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60°C, 90% RH. ESR ( 1) 150% or less than the initial specified value ~~a~~ Leakage current ( 2) Less than or equal to the initial specified value ~~SS~~ After soldering the capacitor under the soldering conditions prescribed here, the capacitor shall meet the specifications listed at Capacitance change Within ± 10% of the initial capacitance value ( 3) right. tan δ 130% or less than the initial specified value Pre-heating shall be done at 150 to 200°C and for 60 to 180 sec. ESR ( 1) 130% or less than the initial specified value The duration for over +230°C temperature at capacitor surface shall ~~a~~ Leakage current ( 2) Less than or equal to the initial specified value Resistance to not exceed 60 seconds. Soldering Heat In case peak temperature is 250°C or less, reflow soldering shall be two times maximum. In case peak temperature is 260°C or less, reflow soldering shall be once. Measurement for solder temperature profile shall be made at the capacitor top. ~~jf ==~~ Marking Navy blue print on the case top ~~pT~~ 1  ESR should be measured at both of the terminal ends closest where the terminals protrude through the plastic platform. 2  Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120 minutes at 105°C. 

- 3  Initial value : The value before test of examination of resistance to soldering. 

~~7~~ Dimensions ® Positive Type numbering system  (Example : 6.3V 470µF) Plastic platform 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Capacitance Lot No. i 0.3 max. C±0.2 P C G 0 J 4 7 1 M C L 1 G S rot LTELITT)I Taping code =a Configuration DR RS | +r Capacitance tolerance (±20%) Series : Voltage ( j:6.3v) [|__| L +0.1-0.4 Ihia H ~~Xe~~ Negative Rated capacitance (470µF) Rated voltage (6.3V) Series name (mm) ~~a~~ Size φ5 ~~es~~ × 6L φ6.3 ~~ds~~ × 6L φ8 × 7L φ10 × 8L φ10 × 10L φ10 × 12.7L Type ~~a~~ φD 5.0 ~~ee~~ 6.3 ~~es~~ 8.0 10.0 ~~ss~~ 10.0 10.0 ~~a~~ L 5.9 ~~ee~~ 5.9 ~~es~~ 6.9 7.9 9.9 12.6 Voltage A 6.0 7.3 9.0 11.0 11.0 11.0 V 2.5 4 6.3 10 16 B 5.3 6.6 8.3 10.3 10.3 10.3 ~~a~~ C 5.3 ~~ee~~ 6.6 8.3 ~~ss~~ 10.3 10.3 10.3 ~~oor~~ Code e g j A C ~~a ee es es~~ E 1.6 2.1 3.2 4.6 4.6 4.6 ~~a~~ H 0.5 to 0.8 ~~ee~~ 0.5 to 0.8 ~~es~~ 0.8 to 1.1 0.8 to 1.1 ~~es~~ 0.8 to 1.1 0.8 to 1.1 e Frequency coefficient of rated ripple current 0 Frequency0/ 120Hz 1kHz 10kHz 100kHz or more Coefficient 0.05 0.30 0.70 1.00 ~~ae ——~~ 

~~le~~ Dimension table in next page. 

CAT.8100L [ 

**CONDUCTIVE  POLYMER  ALUMINUM  SOLID  ELECTROLYTIC  CAPACITORS** 

## **PCG** 

Dimensions 

**==> picture [512 x 655] intentionally omitted <==**

**----- Start of picture text -----**<br>
Rated Voltage Leakage Current ESR Rated Ripple<br>(V) Surge Voltage Rated Capacitance Case Size tan δ (µA) (mΩ) (mArms) Part Number<br> (V) (µF) φD × L (mm) at 20°C  after<br>(code) ( 2 minutes ) (20°C/100kHz) (105°C/100kHz)<br>220     5 × 6   0.12  110  30  2100  PCG0E221MCL1GS<br>330     5 × 6   0.12  500  30  2200  PCG0E331MCL1GS<br>330     5 × 6   0.12  500  10  3300  PCG0E331MCO1GS<br>470  6.3 × 6   0.12  235  20  2900  PCG0E471MCL1GS<br>2.5 560  6.3 × 6   0.12  280  20  3000  PCG0E561MCL1GS<br>2.8<br>(0E) 820    8 × 7  0.12  410  20  3300  PCG0E821MCL1GS<br>1500  10 × 8  0.12  750  17  4100  PCG0E152MCL1GS<br>2700    10 × 10  0.12  1350  12  4700  PCG0E272MCL1GS<br>3300       10 × 12.7  0.12  1650  10  5500  PCG0E332MCL1GS<br>4700       10 × 12.7  0.12  2350  10  5600  PCG0E472MCL1GS<br>180     5 × 6   0.12  144  32  1900  PCG0G181MCL1GS<br>220     5 × 6   0.12  300  32  2000  PCG0G221MCL1GS<br>220     5 × 6   0.12  300  15  2900  PCG0G221MCO1GS<br>390  6.3 × 6   0.12  312  22  2700  PCG0G391MCL1GS<br>4<br>4.6 680    8 × 7  0.12  544  21  3200  PCG0G681MCL1GS<br>(0G)<br>1200  10 × 8  0.12  960  17  4000  PCG0G122MCL1GS<br>2200    10 × 10  0.12  1760  13  4600  PCG0G222MCL1GS<br>2700       10 × 12.7  0.12  2160  11  5300  PCG0G272MCL1GS<br>3300       10 × 12.7  0.12  2640  11  5400  PCG0G332MCL1GS<br>150     5 × 6   0.12  189  33  1800  PCG0J151MCL1GS<br>180     5 × 6   0.12  500  33  1900  PCG0J181MCL1GS<br>180     5 × 6   0.12  500  17  3000  PCG0J181MCO1GS<br>270  6.3 × 6   0.12  340  23  2600  PCG0J271MCL1GS<br>6.3 330  6.3 × 6   0.12  416  23  2700  PCG0J331MCL1GS<br>7.2<br>(0J) 470    8 × 7  0.12  592  22  3100  PCG0J471MCL1GS<br>1000  10 × 8  0.12  1260  18  3800  PCG0J102MCL1GS<br>1800    10 × 10  0.12  2268  14  4400  PCG0J182MCL1GS<br>2200       10 × 12.7  0.12  2772  12  5000  PCG0J222MCL1GS<br>2700       10 × 12.7  0.12  3402  12  5100  PCG0J272MCL1GS<br>82     5 × 6   0.12  164  35  1700  PCG1A820MCL1GS<br>100     5 × 6   0.12  250  35  1800  PCG1A101MCL1GS<br>150  6.3 × 6   0.12  300  25  2500  PCG1A151MCL1GS<br>180  6.3 × 6   0.12  360  25  2600  PCG1A181MCL1GS<br>10<br>11.5 330    8 × 7  0.12  660  23  3100  PCG1A331MCL1GS<br>(1A)<br>560  10 × 8  0.12  1120  20  3600  PCG1A561MCL1GS<br>820    10 × 10  0.12  1640  15  4300  PCG1A821MCL1GS<br>1000       10 × 12.7  0.12  2000  13  4800  PCG1A102MCL1GS<br>1500       10 × 12.7  0.12  3000  13  4900  PCG1A152MCL1GS<br>47     5 × 6   0.12  150  40  1500  PCG1C470MCL1GS<br>56     5 × 6   0.12  240  40  1600  PCG1C560MCL1GS<br>82  6.3 × 6   0.12  262  30  2300  PCG1C820MCL1GS<br>100  6.3 × 6   0.12  320  30  2400  PCG1C101MCL1GS<br>16<br>18.4 150    8 × 7  0.12  480  28  2800  PCG1C151MCL1GS<br>(1C)<br>270  10 × 8  0.12  864  25  3300  PCG1C271MCL1GS<br>470    10 × 10  0.12  1504  20  3700  PCG1C471MCL1GS<br>680       10 × 12.7  0.12  2176  18  4100  PCG1C681MCL1GS<br>820       10 × 12.7  0.12  2624  18  4200  PCG1C821MCL1GS<br>**----- End of picture text -----**<br>


For taping specifications, recommended land size/soldering by reflow and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. 

CAT.8100L