PC50CNR10RP
Photoelectric Sensor, Rectangular, Retroreflective, 10 m, Relay Output, 240 Vac/dc
- Manufacturer: CARLO GAVAZZI
- Product type:
- SVHC: No SVHC (25-Jun-2025)
- IP Rating: IP67
- Output Type: Relay
- Sensor Type: Photoelectric Sensor
- Light Source: 880nm Infrared LED
- Product Range: -
- Qualification: -
- Sensing Method: Retroreflective
- Connection Method: Cable
- Supply Voltage Max: 240V
- Supply Voltage Min: 12V
- Sensing Distance Max: 10m
- Operating Temperature Max: 60°C
- Operating Temperature Min: -20°C
| Delivery and price | |
|---|---|
| Units per pack | 1 |
| Price | 105.0 € |
| Current stock | 10+ |
| Lead time | 30 days |
## **Photoelectrics Retro-reflective, Relay Output Type PC50CNR10RP** - **Range: 10 m** - **Adjustable sensitivity** - **Modulated, infrared light** - **Supply voltage: 12 to 240 VDC and 24 to 240 VAC, 50/60 Hz** - **Output: Relay 3 A, 30 VDC, 240 VAC** - **Make and break switching function** - **LED-indication for output ON, signal stability and supply ON** - **High EMC immunity** **Product De scrip tion Ordering Key PC50CNR10RP** The PC50CNR. is a general sensing performance. The **Type** purpose retro-reflective senlong sensing range in addition **Housing style** sor in a compact squared to sensitivity adjustment gives **Housing size** 17 x 50 x 50 mm reinforced a very flexible sensor. Light **Housing material** PC/ABS-housing. It is useful and dark operation is switch **Housing length** in applications where basic selectable. **Detection principle** sensors provide adequate **Sensing distance Output type** ~~|~~ **Output configuration T e Selection yp Housing Range Ordering no. W x H x D (Sn) Make and break switching** 17 x 50 x 50 mm 10 m **PC 50 CNR 10 RP** **PC 50 CNR 10 RP** **Note:** Reflectors to be ordered separately ## **S ecifications p** **==> picture [243 x 258] intentionally omitted <==** **----- Start of picture text -----**<br> ||||| |---|---|---|---| |Rated operating distance|(Sn)|Up to 10 m, with reflector| |type ER 4, ref. target| |Blind zone|Max. 10 cm| |Sensitivity|Adj. by single-turn pot.meter| |Temperature drift|≤ 0.5%/°C| |Hysteresis|(H)| |Differencial travel|3-20%| |Rated operational volt.|(UB )|12-240 VDC| |24-240 VAC, 50 to 60 Hz| |Rated operational power|≤ 2.0 VA (relay ON)| |Output| |Contact ratings| |Resistive loads|AC 1|3 A/230 VAC| |DC 1|3 A/30 VDC (> 10 mA/5 VDC)| |Mechanical life (typical)|≥ 15 x 10|[6]|operations| |Electrical life (typical)|≥ 1 x 10|[5]|operations| |at 3 A/240 VAC| |Protection|Reverse polarity, transients| |Light source|GaAIAs, LED, 880 nm| |Light type|Infrared, modulated| |Sensing angle|± 2° at 1/2 range| |Ambient light|Max. 5’000 lux| |Operating frequency|20 Hz| **----- End of picture text -----**<br> **==> picture [242 x 272] intentionally omitted <==** **----- Start of picture text -----**<br> |||| |---|---|---| |Response time| |OFF-ON (tON)|≤ 25 ms| |ON-OFF (tOFF)|≤ 25 ms| |Power ON delay|(tv)|≤ 300 ms| |Output function|Light or dark operation is| |switch selectable| |Indication function| |Output ON|LED, yellow| |Supply ON, signal stability|LED,|green| |Environment| |Overvoltage category|II (IEC 60664/60664A; 60947-1)| |Pollution degree|3 (IEC 60664/60664A; 60947-1)| |Degree of protection|IP 67 (IEC 60529; 60947-1)| |Temperature| |Operating|-20° to +60°C (-4° to +140°F)| |Storage|-25° to +80°C (-13° to +176°F)| |Vibration|10 to 150 Hz, 0.5 mm/7.5 g| |(IEC 60068-2-6)| |Shock|2 x 1 m & 100 x 0.5 m| |(IEC 60068-2-32)| |Rated insulation voltage|250 VAC (rms)| |Housing material| |Body|PC/ABS, grey, reinforced| |Front glass|PC black| |Mounting bracket|Steel, galvanized| **----- End of picture text -----**<br> **1** Specifications are subject to change without notice (26.04.2007) **PC50CNR10RP** ## **Specifications (cont.)** |**Connection**<br>Cable|PVC, grey,2 m,5 x 0.34 mm2|**Approvals**<br>**CE-marking**|UL,CSA<br>Yes| |---|---|---|---| |**Weight**|130 g||| ## **O eration Dia ram p g** tv = Power ON delay ~~a)~~ Power supply CO ~~EEE) OG~~ Target present GG), CG) OG), (aC le CO), COG) CO) Object present O ~~U |~~ UU), OG), SP ~~EC~~ ),_COG),_(§$@ EG GA) Break (NC) Output ON Ftv ~~Ot~~ CODE), tC(‘(O™;OCOC~CSS SS), Ss Make (NO) Output ON Ftv4 a ~~NL (CC~~ [NN ## **Dimensions** **==> picture [435 x 127] intentionally omitted <==** **----- Start of picture text -----**<br> 24.85<br>50 17 21<br>R2.3<br>1o 29<br>o f : _ 11.3<br>21.15 19<br>35.2<br>41.4<br>PTE ot apaeve 50<br>9<br>ae | 19 _ - Ø4.45 e n oo 21 24.85 ;<br>aml [ e e Dark/light l [=]<br>35.2 15 R2.3 LED´s Distance<br>Ø5 21.4<br>_4 Q D Eo<br>**----- End of picture text -----**<br> ## **Wiring Diagram** **==> picture [71 x 64] intentionally omitted <==** **----- Start of picture text -----**<br> BN 12-240 VDC<br>24-240 VAC<br>BU<br>GY<br>BK<br>3 A/30 VDC<br>3 A/230 VAC<br>WH<br>**----- End of picture text -----**<br> ## **Detection Diagram** **==> picture [164 x 164] intentionally omitted <==** **----- Start of picture text -----**<br> Sensor<br>Y<br>X R27<br>Kodac test card<br>amt |.<br>en an ll<br>ae i<br>ia) 2000 4000 6000 8000<br>Sensing range (mm)<br>(mm)<br>**----- End of picture text -----**<br> **2** Specifications are subject to change without notice (26.04.2007) **PC50CNR10RP** ## **Si nal Stabilit g y** ## **Excess Gain** **==> picture [61 x 111] intentionally omitted <==** **----- Start of picture text -----**<br> Excess gain<br>150%<br>100%<br>70%<br>Green LED ON<br>Yellow LED ON<br>**----- End of picture text -----**<br> **==> picture [13 x 5] intentionally omitted <==** **----- Start of picture text -----**<br> Time<br>**----- End of picture text -----**<br> **==> picture [163 x 95] intentionally omitted <==** **----- Start of picture text -----**<br> roo<br>vot LETH ET<br>“10 10,0 100,0 4o00,0<br>Sensing range (mm)<br>Excess gain<br>**----- End of picture text -----**<br> **==> picture [440 x 187] intentionally omitted <==** **----- Start of picture text -----**<br> Installation Hints<br>To avoid interference from inductive voltage/ Relief of cable strain Protection of the sensing face Switch mounted on mobile carrier<br>current peaks, separate the prox. switch pow-<br>er cables from any other power cables, e.g.<br>motor, contactor or solenoid cables<br>Incorrect<br>Correct<br>The cable should not be pulled A proximity switch should not serve as Any repetitive flexing of the<br>mechanical stop cable should be avoided<br>osas<br>Deliver Contents Accessories<br>y<br>• Photoelectric switch: PC50CNR.. • Reflectors: ER-series<br>**----- End of picture text -----**<br> - Installation instruction - Screwdriver for adjustment: 77-001 - Mounting bracket APC50-1 - **Packaging:** Cardboard box For further information refer to “Accessories” **==> picture [224 x 147] intentionally omitted <==** **----- Start of picture text -----**<br> mn 6.5 ø6.5 R4<br>6.25 Sanna 12<br>20<br>32 R2.25<br>R4<br>(paca ø4.5 | GH<br>ye ao<br>ø4.5 9 R4<br>21<br>Mounting bracket =e 50<br>APC50-1<br>4.5<br>R28 90°<br>13°<br>20°<br>7<br>20 6 ø6.5<br>10<br>2<br>35<br>16.5<br>4.5<br>**----- End of picture text -----**<br> **3** Specifications are subject to change without notice (26.04.2007)
Updated at April 29, 2026
Founded in Milan in 1931, Carlo Gavazzi is a globally recognized leader in the design and manufacture of high-quality automation components. For nearly a century, the company has driven technological innovation in the industrial and building automation markets. With ISO 9001-certified production facilities across Europe and Asia, Carlo Gavazzi delivers state-of-the-art solutions tailored for demanding applications, including HVAC, renewable energy, semiconductor manufacturing, and electric vehicle charging infrastructure. Our extensive portfolio of Carlo Gavazzi components focuses heavily on their industry-leading switching and sensing technologies. We carry a comprehensive selection of solid state relays, contactors, and power relays engineered for exceptional reliability and thermal performance. Alongside these robust switching solutions, our range features a wide array of precision sensors, with a strong emphasis on proximity switches and light sensors that are critical for automated manufacturing processes, mobile equipment, and access control systems. Beyond core sensing and switching, the Carlo Gavazzi lineup extends into essential power management, circuit protection, and control devices. This includes highly efficient AC/DC converters, thermal magnetic circuit breakers, and advanced panel instrumentation designed to monitor and optimize energy efficiency. From current sensing transformers to motor starters, engineers consistently trust Carlo Gavazzi to provide competitive, dependable, and forward-thinking components for their most complex automation challenges.
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 540,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →