PC50CND10BAM1

## **Photoelectrics Diffuse-reflective, Transistor Output Type PC50CND10BA** 

- **Range: 1 m** 

- **Adjustable sensitivity** 

- **Modulated, infrared light** 

- **Supply voltage: 10 to 30 VDC** 

- **Output: 200 mA, NPN or PNP** 

- **Make and break switching function selectable** 

- **LED for output indication, signal stability and power ON** 

- **Protection: reverse polarity, short circuit, transients** 

- **Cable and plug version** 

- **High EMC immunity** 

**Product Description Ordering Key PC50CND10BAM1** The PC50CND. is a family of performance. The long sens- **Type** general purpose diffuseing range together with sensi- **Housing style** reflective sensors in a comtivity adjustment gives a very **Housing size** pact square 17 x 50 x 50 mm flexible sensor.  The DC types **Housing material** reinforced PC/ABS-housing. are with a transistor output **Housing length** They are useful in applicaand the configuration is fully **Detection principle** tions where basic sensors programmable (NPN, PNP, **Sensing distance** provide adequate sensing NO and NC). **Output type** ~~|~~ **Output configuration Connection type T e Selection yp Housing Range Ordering no. Ordering no. W x H x D Sn NPN & PNP cable NPN & PNP plug Make & break switching Make & break switching** 17 x 50 x 50 mm 1 m **PC 50 CND 10 BA PC 50 CND 10 BAM1** 

**Ordering no. Ordering no. NPN & PNP cable NPN & PNP plug Make & break switching Make & break switching PC 50 CND 10 BA PC 50 CND 10 BAM1** 

## **S ecifications p** 

|**Rated operating distance**(Sn)|Up to 1 m,|
|---|---|
||reference target Kodak|
||test card R 27, white, 90%|
||reflectivity,200 x 200 mm|
|**Blind zone**|Max. 10 cm|
|**Sensitivity**|Adjustable by single-turn|
||potentiometer|
|**Temperature drift**|≤0.5%/°C|
|**Hysteresis**(H)||
|Differential travel|3 - 20%|
|**Rated operational volt.**(UB)|10 to 30 VDC<br>(ripple included)|
|**Ripple**(Urpp )<br>**Output current**<br>Continuous (Ie)|≤10%<br>≤200 mA|
|Short-time (I)|≤200 mA|
|**No load supply current**(Io)<br>**Minimum operational current** (Im)<br>**OFF-state current**(Ir )|(max. load capacity100 nF)<br>≤40 mA<br>0.5 mA<br>≤100µA|
|**Voltage drop **(Ud )|≤2.5 VDC @ 200 mA|
|**Protection**|Short-circuit, reverse pola-|
||rity, transients|



|**Light source**|GaAlAs, LED, 880 nm|
|---|---|
|**Light type**|infrared, modulated|
|**Sensing angle**|± 2° at 1/2 range|
|**Ambient light**|Max. 5’000 lux|
|**Operating frequency**|500 Hz|
|**Response time**||
|OFF-ON (tON)|≤1 ms|
|ON-OFF(tOFF )|≤1 ms|
|**Power ON delay **(tv)|< 300 ms|
|**Output function**||
|NPN and PNP|Switch selectable|
|Complementaryfunction|Make and break(NO + NC)|
|**Indication function**||
|Output ON|LED, yellow|
|Signal stabilityON andpower ON|LED, green|
|**Environment**||
|Installation category|II (IEC 60664/60664A;|
||60947-1)|
|Pollution degree|3 (IEC 60664/60664A;|
||60947-1)|
|Degree ofprotection|IP 67(IEC 60529;60947-1)|
|**Temperature**||
|Operating|-20°to +60°C (-4°to +140°F)|
|Storage|-25°to +80°C (-13°to +176°F)|



**1** 

Specifications are subject to change without notice (27.02.2006) 

**PC50CND10BA** 

## **Specifications (cont.)** 

|**Vibration**|10 to 150 Hz, 0.5 mm/7.5 g|
|---|---|
||(IEC 60068-2-6)|
|**Shock**|2 x 1 m & 100 x 0.5 m|
||(IEC 60068-2-6,60068-2-32)|
|**Rated insulation voltage**|50 VAC(rms)|
|**Housing material**||
|Body<br>Front glass|PC/ABS, grey<br>PC black|
|Mounting bracket|Steel, galvanized|



|**Connection**||
|---|---|
|Cable|PVC, grey, 2 m, 4 x 0.34 mm2|
|Plug|PBTP, M12 x 1|
|Cables forplug (M1)|CON.1A-series|
|**Weight**|110g|
|**Approvals**|UL,CSA|
|**CE-marking**|Yes|



## **O eration Dia ram p g** 

tv = Power ON delay a Power supply ~~A ss~~ Object/target present Break (NC) Output ON Ftv Make (NO) Output ON Ftv4 

## **Dimensions** 

**==> picture [470 x 292] intentionally omitted <==**

**----- Start of picture text -----**<br>
Plug version<br>24.85<br>50 17 21<br>R2.3<br>1o 29<br>11.3<br>21.15 19<br>35.2<br>41.4<br>50<br>9<br>19 Ø4.45 21 24.85<br>NPN/PNP<br>35.2 14.5 15 R2.3 LED´s Distance<br>21.4<br>Cable version<br>24.85<br>50 17 21<br>R2.3<br>1o 29<br>11.3<br>21.15 19<br>35.2<br>41.4<br>50<br>9<br>i t 19 Ø4.45 E s 21 24.85<br>NPN/PNP<br>35.2 15 R2.3 LED´s Distance<br>Ø5 21.4<br>**----- End of picture text -----**<br>


**2** 

Specifications are subject to change without notice (27.02.2006) 

**PC50CND10BA** 

## **Wiring Diagrams** 

**==> picture [151 x 152] intentionally omitted <==**

**----- Start of picture text -----**<br>
NPN<br>PNP 1 BN +<br>4 BK<br>2 WH<br>3 BU<br>-<br>**----- End of picture text -----**<br>


## **Si nal Stabilit g y** 

**==> picture [61 x 111] intentionally omitted <==**

**----- Start of picture text -----**<br>
Excess gain<br>150%<br>100%<br>70%<br>Green LED ON<br>Yellow LED ON<br>**----- End of picture text -----**<br>


**==> picture [13 x 5] intentionally omitted <==**

**----- Start of picture text -----**<br>
Time<br>**----- End of picture text -----**<br>


## **Detection Diagram** 

**==> picture [209 x 336] intentionally omitted <==**

**----- Start of picture text -----**<br>
Sensor<br>Y<br>X R27<br>Kodac test card<br>150,00<br>100,00<br>50,00<br>0,0<br>-50,00<br>-100,00<br>-150,00<br>0 200,0        400,0          600,0         800,0       1000,0     1200,0<br>Sensing range (mm)<br>Excess Gain<br>Netistinatis sti<br>Sensing range (mm)<br>(mm)<br>Excess gain<br>**----- End of picture text -----**<br>


## **Excess Gain** 

## **Installation Hints** 

**==> picture [436 x 106] intentionally omitted <==**

**----- Start of picture text -----**<br>
To avoid interference from inductive voltage/ Relief of cable strain Protection of the sensing face  Switch mounted on mobile carrier<br>current peaks, separate the prox. switch pow-<br>er cables from any other power cables, e.g.<br>motor, contactor or solenoid cables<br>TS Incorrect<br>Correct<br>The cable should not be pulled A proximity switch should not serve as Any repetitive flexing of the<br>mechanical stop cable should be avoided<br>**----- End of picture text -----**<br>


## **Deliver Contents y** 

**==> picture [245 x 133] intentionally omitted <==**

**----- Start of picture text -----**<br>
TA 6.5 ø6.5 R4<br>6.25 yo 12<br>20<br>a 32 R2.25<br>R4<br>ø4.5<br>st = |<br>ø4.5 Me 9 i] d R4<br>Mounting bracket 21<br>A P C50-1 50<br>4.5<br>R28 90°<br>13°<br>20°<br>7<br>20 6 ø6.5<br>10<br>2<br>35<br>16.5<br>4.5<br>**----- End of picture text -----**<br>


- Photoelectric switch: PC50 CND.. 

- Installation instruction 

- Mounting bracket APC50-1 

- **Packaging:** Cardboard box 

## **Accessories** 

- Screwdriver for adjustment: 77-001 

- Connector type CON.1A.. 

For further information refer to “Accessories” 

**3** 

Specifications are subject to change without notice (23.01.03)