PC1200

## **EXTREME POWER AND ENDURANCE** 

Extr SERIES eme **TM** 

> **www.odysseybattery.com  www.enersys.com** wee OM www enersys com 

## **DRIVE IT TO EXTREMES** 

## Up to twice the overall power of conventional batteries! 

## Doing double duty 

Some batteries offer enormous cranking power. Others, deep cycle reserve power. Unbeatable ODYSSEY[®] Extreme SeriesTM batteries do both. 

Even at very low temperatures, ODYSSEY Extreme Series batteries have the power to provide enginecranking pulses in excess of 2250 amps for 5 seconds – double to triple that of equally sized conventional batteries. And they can handle 400 charge-discharge cycles to 80% depth of discharge.[†] 

## Packed with more power 

Like many popular spiral-wound batteries, ODYSSEY Extreme Series batteries employ dry cell Absorbed Glass Mat (AGM) technology to contain acid, allowing the battery to be installed even on its side. But the densely packed flat plates in an ODYSSEY Extreme Series battery avoid the “dead space” between cylinders in a “six pack” design. The result is 15% more plate surface area - and that translates to more power! 

## How so much power is possible 

ODYSSEY Extreme Series batteries are made with flat plates made of 99.99% pure lead – not lead alloy. Pure lead plates can be made thinner, so we can fit more of them in the battery. More ODYSSEY battery plates mean more plate surface area. And that means more power – twice as much as conventional batteries. 

## Unused battery space 

ODYSSEY[®] Extreme Series[™] batteries vs. spiral-wound designs: 15% more plate surface area! 

## _ODYSSEY_ ® _batteries have a new name and new look!_ 

While we have evolved the name to ODYSSEY[®] Extreme SeriesTM batteries, and we’ve updated the look, rest assured that the Extreme Series batteries are packed with the same power and technology you’ve been depending on for years. 

**==> picture [38 x 6] intentionally omitted <==**

**----- Start of picture text -----**<br>
SERIES TM<br>**----- End of picture text -----**<br>


## Shipped fully charged. Get it and go! 

ODYSSEY Extreme Series batteries are ready for use right out of the box. If the ODYSSEY Extreme Series battery’s voltage is 12.65V or greater, simply install the battery in your vehicle and you are ready to go! If below 12.65V, boost charge following the instructions in the ODYSSEY Extreme Series battery Owner’s Manual and/or Technical Manual. Putting a boost on the battery will not damage it, even if its voltage reads higher than 12.65V. 

www.odysseybattery.com   www.enersys.com 

†PC370, PC950 and PC1100 are engine start only. Limited cycling. 

Designed and built to last up to 3 times as long as conventional batteries! 

- Select ODYSSEY Extreme Series batteries 

•  TPPL design holds acid in place to prevent 

•  ODYSSEY Extreme Series batteries can be 

## Tin Alloy Coated Brass Terminals* 

To ensure secure, corrosion-free cable connections, our brass terminals are coated with a high-quality tin alloy[◆] 

## Robust Intercell Connections 

To resist vibration and eliminate internal sparking, cell connectors are casted to the plates and bonded. 

## Compressed TPPL Plate Separators 

For extreme vibration resistance, the TPPL plate separators are compressed before being inserted into the case. 

## Pure Lead Plates 

To provide more power, the plates in our batteries are constructed from 99.99% pure lead. The plates are  extremely thin, so more of them can ae fit into the battery. More lead plates means more power. - —_ => 

Optional height adapter may be used on 34-PC1500 models for installations where a group 24 or group 27 is required. Snap the adapter securely into place on the bottom of the 34-PC1500 battery. In some installations, the 34-PC1500 model with this adapter may be used to replace a group 24F or 27F depending on required cable length. 

## **SUPERIOR STARTING POWER AND VIBRATION RESISTANCE** 

The ODYSSEY[®] Extreme Series[TM] battery’s incredible combination of power and endurance makes these batteries ideal for just about anything, just about anywhere. 

## Emergency Response 

ODYSSEY[®] Extreme SeriesTM batteries are always on call with maintenancefree starting power plus massive deep cycle reserve power for on-board accessories. • Police cars = • Fire engines • Ambulances {Te d ni | = i ee = 1 & al & —— 

## 4X4 & Off-Road 

Rugged construction and non-spillable, dry cell design ensure extreme shock and vibration resistance for the toughest off-road applications. 

- SUVs 

- Light trucks 

- Off-road vehicles 

## Heavy Duty/Commercial 

Superior cranking power and deep cycle ability mean ODYSSEY Extreme Series batteries get the job done. 

- Farm, lawn and garden equipment 

- Tractor trailers 

- Earth-moving/ construction equipment 

**==> picture [95 x 10] intentionally omitted <==**

**----- Start of picture text -----**<br>
Classic & Vintage Cars<br>**----- End of picture text -----**<br>


The deep cycle reserve power of ODYSSEY[®] Extreme SeriesTM batteries ensures that classic and vintage cars will start reliably, even after two years of sitting idle. 

- Vintage vehicles 

- Classic trucks 

- Muscle cars 

## Motorcycles & Powersports 

The ODYSSEY Extreme Series battery delivers the power and durability that powersports vehicles demand. Rugged construction and non-spillable, dry cell design provides extreme shock and vibration resistance. 

- Motorcycles and ATVs 

- Personal watercraft 

- Snowmobiles 

- Ultralight and GyrocopterTM aircraft 

## High Performance & Modified Vehicles 

From starting high-compression engines to powering high-intensity discharge lights, ODYSSEY Extreme Series batteries can handle any upgrade, and can be mounted in almost any position. 

- Tuner cars 

- Race cars 

• Dragsters 

## Sound and Video Packages 

ODYSSEY Extreme Series batteries provide the power and mounting flexibility that today’s high-wattage, in-car sound and video systems demand. 

- Audio systems 

- Video systems 

- Auxiliary amplifiers 

## **ODYSSEY® EXTREME SERIES** 

|**Model**|**Voltage**|**PHCA****<br>**(5 sec)**|**CCA***|**HCA**|**MCA**|**Nominal Capacity**|**Nominal Capacity**|**Reserve**<br>**Capacity**<br>**Minutes**|**Length**<br>**mm**|**Width**<br>**mm**|**Height**††<br>**mm**|**Weight**<br>**kg**|**Terminal**|**Torque**<br>**Specs**<br>**Nm max**|**Internal**<br>**Resistance**<br>**(mΩ)**|**Short**<br>**Circuit**<br>**Current**|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|||||||**20 Hr**<br>**Rate-Ah**|**10 Hr**<br>**Rate-Ah**||||||||||
|**PC310**|12|310|100|200|155|8|7|9|137.5|86.0|99.0|2.7|M4 Receptacle|1.0|27.1|455A|
|**PC370**|12|425|200|315|270|15|14|25|200.0|77.0|140.0|5.7|M6 Stud|3.9|13.5|891A|
|**PC535**|12|535|200|300|265|14|13|21|170.2|99.1|158.5|5.4|M6 Receptacle|4.5|8|1000A|
|**PC545**|12|460|150|280|220|13|12|18|177.8|85.9|131.3|5.2|M6 Receptacle|5.6|10|1200A|
|**PC625**|12|530|200|420|340|18|17|27|170.2|99.1|176.5|6.0|M6 Receptacle|4.5|7|1800A|
|**PC680**|12|520|170|350|280|16|16|24|184.7|79.0|191.8|7.0|M6 Receptacle†<br>or SAE<br>3/8” Receptacle|5.6|7|1800A|
|**PC925**|12|900|330|610|480|28|27|48|168.7|179.1|148.1|11.8|M6 Receptacle†<br>or SAE<br>3/8” Receptacle|6.8|5|2400A|
|**PC950**|12|950|400|600|500|34|32|60|250.0|97.0|156.0|9.0|M6 Stud|3.9|7.1|1700A|
|**PC1100**|12|1100|500|800|650|45|43|87|250.0|97.0|206.0|12.5|M6 Stud|3.9|5.1|2450A|
|**PC1200**|12|1200|540|860|725|42|40|78|199.9|169.2|193.0|17.4|M6 Receptacle†<br>or SAE<br>3/8” Receptacle|6.8|4.5|2600A|
|**PC1220**|12|1220|680|960|860|70|64.8|135|278.0|175.0|190.0|20.7|DIN Lead Post|N/A|5.7|2200A|
|**75/86-PC1230**|12|1230|760|1050|815|55|50|110|240.3|179.8|201.2|20.6|TOP SAE SIDE<br>3/8” Receptacle|6.8|2.5|3100A|
|**PC1350**|12|1350|770|1080|960|95|88.5|195|353.0|175.0|190.0|27.4|DIN Lead Post|N/A|4.2|2900A|
|**25-PC1400**|12|1400|850|1150|950|65|55|130|240.3|173.7|220.7|22.7|SAE|6.8|2.5|3100A|
|**35-PC1400**|12|1400|850|1150|950|65|55|130|240.3|173.7|220.7|22.7|SAE|6.8|2.5|3100A|
|**34-PC1500**|12|1500|850|1250|1050|68|62|135|275.6|171.7|200.2|22.4|SAE|6.8|2.5|3100A|
|**34R-PC1500**|12|1500|850|1250|1050|68|62|135|275.6|171.7|200.2|22.4|SAE|6.8|2.5|3100A|
|**34M-PC1500**|12|1500|850|1250|1050|68|62|135|275.6|171.7|201.9|22.4|SAE and<br>3/8” Stud (Pos.),<br>5/16”Stud (Neg.)|6.8|2.5|3100A|
|**34/78-PC1500**|12|1500|850|1250|1050|68|62|135|275.6|179.8|200.2|22.4|TOP SAE SIDE<br>3/8” Receptacle|6.8|2.5|3100A|
|**PC1700**|12|1550|810|1325|1175|68|65|142|331.0|168.4|197.6|27.6|M6 Receptacle†<br>or SAE<br>3/8” Receptacle|6.8|3.5|3500A|
|**65-PC1750**|12|1750|950|1350|1070|74|65|145|300.5|182.9|190.5|26.3|SAE|6.8|2.0|5000A|
|**PC1800-FT**|12|1800|1300|1600|1450|214|190|475|581.0|125.0|316.5|60.0|M10 Stud|9.0|3.3|3800A|
|**31-PC2150**|12|2150|1150|1545|1370|100|92|205|331.7|175.0|243.6|35.3|3/8” Stud or SAE†|16.9-22.6|2.2|5000A|
|**31M-PC2150**|12|2150|1150|1545|1370|100|92|205|330.2|172.7|238.5|35.3|SAE and<br>3/8” Stud (Pos.),<br>5/16”Stud (Neg.)|16.9-22.6|2.2|5000A|
|**PC2250**|12|2250|1225|1730|1550|126|114|240|286.0|269.0|233.0|39.0|DIN Terminal<br>and 3/8” Stud|11.0<br>For 3/8”<br>Stud Only|2.1|5000A|



*** Cold Start Performance:** _S.A.E J537 JUNE 82      **Pulse Current     † Can be fitted with brass automotive terminal_ 

**Optional metal jackets:** _available on PC545, PC680, PC925, PC1200, PC1700 and 31-PC2150_ 

**Operating Temperature Range:** _PC310, PC370, PC950, PC1100 and PC1800-FT: -40°C to 50°C, PC535 and PC625: -40°C to 45°C, PC545, PC680, PC925, PC1200 and PC1700 without metal jacket: -40°C to 45°C, PC545, PC680, PC925, PC1200 and PC1700 with metal jacket: -40°C to 80°C, PC1220, PC1350 and PC2250: -40°C to 40°C, All other models: -40ºC to 80ºC_ 

_†† Height may include SAE/DIN terminal, metal jacket and maximum tolerance_ 

## **POWER FOR EVERY APPLICATION.** 

## **TERMINAL LAYOUTS** 

**==> picture [318 x 235] intentionally omitted <==**

**----- Start of picture text -----**<br>
PC310 PC370 PC535 PC545 PC625<br>PC680 PC925*** PC950 PC1100 PC1200*** PC1220<br>75/86-PC1230 PC1350 25-PC1400 35-PC1400 34-PC1500 34R-PC1500<br>34M-PC1500 34/78-PC1500 PC1800-FT 31-PC2150 31M-PC2150 PC2250<br>PC1700 65-PC1750<br>Drawing sizes are for terminal position reference only;<br>diagrams are not proportionate to each other.<br>+ - ***Optional Reversed Polarity (L)<br>**----- End of picture text -----**<br>


## ODYSSEY[®] EXTREME SERIES[TM] BATTERY TECHNOLOGY COMPARISON 

**==> picture [193 x 265] intentionally omitted <==**

**----- Start of picture text -----**<br>
ODYSSEY [® ] CONVENTIONAL<br>EXTREME SERIESTM BATTERIES<br>BATTERIES<br>DESIGN LIFE 8-12 years (Float)  5 years<br>@ 25˚C<br>SERVICE LIFE 3 to 10 years 1 to 5 years<br>ELECTROLYTE Drycell (“starved  Most are acid<br>electrolyte”) no  flooded (causing<br>external leakage or  acid burns and<br>corrosion spills); some<br>wet sealed or<br>“gelled”<br>STORAGE LIFE 2 years before  6-12 weeks<br>needing charge  before needing<br>@ 25˚C charge<br>SHIPPING Air transportable;  Ground<br>US Department  transport;<br>of Transportation  classified as<br>classified non- hazardous<br>spillable (less  material (more<br>expensive) expensive)<br>END OF LIFE Immediate and<br>Battery slowly<br>catastrophic<br>loses power at<br>loss of power<br>end of life; no<br>(can leave you<br>catastrophic failure<br>stranded)<br>**----- End of picture text -----**<br>


## **WARRANTY:** 

EnerSys Energy Products Inc. (“Manufacturer”) warrants its ODYSSEY[®] Extreme Series[TM] batteries (hereafter referred to as “Battery”) to be free of defects in material and workmanship for the following Applicable Warranty Periods: 

- 2 years for Auxiliary Power (APU) and other non engine start cycling applications. 

- 2 years for power sports applications. 

- 3 years for commercial, industrial, marine and automotive applications in non BCI sizes. 

- 4 years for an engine starting application for PC1220, PC1350, PC2250 and all BCI sizes. 

The warranty does not cover a Battery reaching its normal end of life which may occur prior to the warranty periods stated above. Depending on the application a Battery can reach its normal end of life before the end of the warranty period. 

A Battery can deliver only a fixed number of usable amp-hours over its lifetime and is considered to have reached its normal end of life if the application uses up all of these amphours, regardless of the time the Battery has been in service. Therefore Manufacturer reserves the right to deny a warranty claim if it determines the Battery to be at its normal end of life, even if the claim is lodged within the applicable warranty period. 

The Applicable Warranty Period begins from the date of purchase with original receipt, or, if no receipt is available, from Manufacturer’s shipping date as stated on the battery. Batteries determined to meet the conditions of this warranty will be replaced free of charge if, at the sole discretion of Manufacturer, adjustment is necessary due to defect in material or workmanship. Batteries for warranty replacement consideration are to be returned to the original supplying distributor/dealer. If not feasible, other ODYSSEY[®] Extreme Series[TM ] distributors/dealers can be approached but a warranty processing fee may be applied. This warranty may vary from country to country; contact your authorized ODYSSEY[®] Battery wholesaler or dealer for the applicable warranty. 

Batteries replaced under the warranty provisions will be shipped with a yellow replacement warranty sticker and carry only the remainder of the original Applicable Warranty Period. 

- To register your ODYSSEY battery, please visit our website at **www.odysseybattery.com** 

## **GENERAL PROVISIONS:** 

A. Manufacturer has no obligation under the limited warranty herein in the event the Battery is damaged or destroyed as a result of one for more of the following: 

- Willful abuse, misuse, physical damage, neglect or if the top decorative cover has been removed. 

- Natural forces such as wind, lightning, hail; damage due to fire, collision, explosion, vandalism, theft, penetration or opening of the Battery case in any manner. 

- Overcharging, undercharging, charging or installing in reverse polarity, improper maintenance, allowing the Battery to be deeply discharged via a parasitic load or mishandling of the Battery such as but not limited to using the terminals for lifting or carrying the Battery. Trickle chargers that do not have a regulated trickle charge voltage between 13.5V and 13.8V (no lower than 13.5V and no higher than 13.8V) will cause early failure of the Battery. Use of such chargers with the Battery will also void the Battery’s warranty. For applications where an alternator is present, the alternator must deliver between 14.0V and 14.7V when measured at the Battery’s terminals. Alternators that do not have a regulated charge between 14.0V and 14.7V (no lower than 14.0V and no higher than 14.7V) will cause early failure of the Battery. Use of such alternators with the Battery will also void the Battery’s warranty. 

- Repair or attempted repair of the Battery by anyone other than an authorized Manufacturer’s representative shall void this warranty. 

- Normal or accelerated deterioration in the electrical qualities due to operating or application conditions. 

- If the Battery is used for an application that requires higher cranking power or a greater reserve rating than the Battery is designed to deliver, or the Battery capacity is less than the Battery capacity specified by the vehicle manufacturer, or the Battery is otherwise used in applications for which it was not designed. 

- Prolonged storage of vehicles with fuel injection computers, alarms, GPS and other electrical devices that require continuous battery power to support active memories; this power drain must be offset with a maintenance-float charger, periodic charging or disconnecting the Battery to prevent irreversible damage. A Battery with an open circuit voltage (OCV) of equal to or less than 8.0V will be deemed as over discharged and void warranty due to misuse and/ or neglect. 

WARNING - DO NOT USE ANY TYPE OF OIL, ORGANIC SOLVENT, ALCOHOL, DETERGENT, STRONG ACIDS, STRONG ALKALIS, PETROLEUM-BASED SOLVENT OR AMMONIA SOLUTION TO CLEAN THE BATTERY COVERS AND BATTERY TOPS. THESE MATERIALS MAY CAUSE PERMANENT DAMAGE TO THE BATTERY COVERS BATTERY TOPS AND WILL VOID THE WARRANTY. 

- B. To obtain warranty service: 

1. Return the Battery to the original supplying wholesaler or dealer. 

2.  If the Battery is determined by Manufacturer, in its sole discretion, to be defective for material or workmanship under terms of this limited warranty, it will be replaced. 

3.  Manufacturer’s acceptance of any items shipped to Manufacturer shall not be deemed an admission that the items so shipped are defective. Any items shipped back to Manufacturer, shall in Manufacturer’s sole discretion, become Manufacturer’s property. 

THIS LIMITED WARRANTY IS IN LIEU OF, AND MANUFACTURER DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, STATUTORY, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. MANUFACTURER’S EXCLUSIVE LIABILITY FOR BREACH OF WARRANTY SHALL BE TO REPLACE THE BATTERY WITHIN THE EFFECTIVE WARRANTY PERIOD. IN NO EVENT SHALL MANUFACTURER BE LIABLE FOR ANY LOSS OR DAMAGES OF ANY OTHER KIND, WHETHER DIRECT, INCIDENTAL, CONSEQUENTIAL, EXEMPLARY, SPECIAL OR OTHERWISE. NOR SHALL MANUFACTURER BE LIABLE FOR ANY REMOVAL OR INSTALLATION EXPENSE, OR THE LOSS OF TIME OR PROFITS. 

Some countries and/or states do not allow limitation on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations may not apply to you. This warranty gives you specific legal rights, which may vary from country to country and/or state to state. This warranty shall be governed by and interpreted in accordance with the laws of the Commonwealth of Pennsylvania without regard to Pennsylvania conflicts of laws rules. The United Nations Convention on Contracts for the International Sale of Goods signed in Vienna in 1980 shall not apply to this warranty. This warranty is understood to be the exclusive agreement between the parties relating to the subject matter hereof. No employee or representative of Manufacturer is authorized to make any warranty in addition to those made in this agreement. 

- Failure to properly install the Battery or lack of metal jacket for high temperature or vibration applications. 

## **About EnerSys[®]** 

EnerSys[®] is a global leader in stored energy solutions for automotive, military, and industrial applications. With manufacturing facilities in 18 countries, sales and service locations throughout the world, and over 100 years of battery experience, EnerSys is a powerful partner for automotive service and parts providers. 

EnerSys Global Headquarters 2366 Bernville Road Reading, PA 19605 Tel: +1-610-208-1991 +1-800-538-3627 Fax:+1-610-372-8613 

EnerSys EMEA EH Europe GmbH Löwenstrasse 32 8001 Zürich, Switzerland Tel: +41 (0) 44 215 74 10 

EnerSys Asia 152 Beach Road Gateway East Building #11-03 Singapore 189721 Tel: +65 6508 1780 

www.odysseybattery.com www.enersys.com 

**==> picture [77 x 49] intentionally omitted <==**

© 2013 EnerSys. All rights reserved. Trademarks and logos are the property of EnerSys and its affiliates, except Gyrocopter[™] , which is not the property of EnerSys. Publication No: EN-ODY-RS-010 – August 2013. Subject to revisions without prior notice. E.&O.E.