PC-0224-050-0

Single- and two phases, primary switched mode power supply **PC-0224-050-0** 

## Advantages 

~~pe~~ Stabilised and adjustable output voltage Fast tripping of standard bi-metal circuit breakers DC OK signal contact SF ~~[oT~~ Parallel operation LE Push-in terminals Shey | ~~Lo~~ Robust DIN rail mounting L ~~OT~~ Resistant to transient overvoltages up to 4 kV 

## Applications 

The economic power supplies in the Power Compact series set new stan¬dards in their class. Above-average robustness against transients and energetic surge pulses at their input and equipped with essential additional aspects for a worldwide high plant availability. A powerful and flexible option that's still light and compact. Due to a single or two-phase supply from 180 V to 550 V, these power supplies are suitable for a highly diverse range of applications in solar, measurement and control technology and they really come into their own in industrial and building automation. The output voltage can be set easily using the rotary potentiometer on the front of the housing. The robust DIN rail fastening method and push-in connection terminals enable fast and secure mounting. 

**==> picture [100 x 6] intentionally omitted <==**

**----- Start of picture text -----**<br>
Picture shows PC-0224-050-0<br>**----- End of picture text -----**<br>


## Standards Z 

## Approvals W o Z 

Primary switched mode power supply to UL 60950, UL 508 

UL/CSA 60950, UL 508, GL (in preparation) 

Safety: EN 61558-2-16, EN 60950-1 EMC: EN 61204-3 

## Single- and two phases, primary switched mode power supply **PC-0224-050-0** 

**==> picture [547 x 478] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||||||
|---|---|---|---|---|---|
|Type|PC-0224-050-0|Type|PC-0224-050-0|
|Input|Input|
|Input rated voltage|200 - 500 Vac|Connections input (direct plug-in technology Push-|max 2,5 mm²|
|180 - 550 Vac|In)|
|Input voltage range|(254 - 780 Vdc)|Output|
|xe)|Input voltage derating|-0.5 %/Vac < 200 Vac(-0.4 %/Vdc < 280 Vdc)|xe)|Connections output (direct plug-in technology Push-In)|max 2,5 mm²|
|8|Rated frequency range|44 Hz - 66 Hz / 0 Hz|§|Signaling|
|8|Input rated current (rated load)|1.25 A (200 Vac) / 0.67 A (500 Vac)|Connections signalling (direct plug-in technology|
|Starting current limiter|< 30 A, NTC|Push-In)|max 2,5 mm²|
|oOwo|Switch-on time|0.98 s (200 Vac) / 0.47 s (500 Vac)|5=]o|nT|Environment|
|Mains buffering|15 ms (200 Vac) / 126 ms (500 Vac)|S|)|
|Mounting position|horizontal for standard rail DIN TH 35|
|Power factor|0.52|
|Input fuse internal|3.15 A|Measures and weights|
|6 A, 10 A, 16 A,|Weight|0.60 kg|
|Recommended back-up fuse (circuit breaker)|characteristic B, C|Dimensions W x H x D|42 x 127 x 126 mm|
|Transient surge voltage protection|Varistor|
|Output|
|Output rated voltage|24 Vdc|LZ|
|Output voltage range|23 – 28.5 Vdc|
|Output rated current|5 A|R|a|GZ|
|Output limited current|typ. 5.5 A (constant current)|
|Tripping of LS circuit breakers|max. B4|127.0|
|Parallel connection|Yes|
|Serial operation|Yes|
|Power dissipation, no load/rated load|0.94 W / 16.36 W (230 Vac) 1.35 W / 14.55 W (400 Vac)|63.5|
|Max. power losses|18.2 W (200 Vac / 24 V / 5 A)|
|Efficiency|typ. 89 %|3.0|
|Ripple factor|typ. 30 mVss|42.0|
|Resistance to reverse feed max.|35 Vdc|
|Over-voltage-protection|max. 40 Vdc|
|Signaling|
|Status indicator|LED green|
|Signal output|Relay contact|
|Approvals|
|Approvals|cURus, cULus, GL (prepared)|
|Environment|
|Cooling method|natural convection|
|Ambient temperature|-25 °C ... +70 °C|
|Storage temperature|-25 °C ... +85 °C|
|Derating|-2.5 %/K > +55 °C|
|Required minimum spacing (left/right)|0 mm|
|Required minimum spacing (over/under)|50 mm|
|Safety and protection|
|Protection index|IP 20|
|Safety class|I, with PE connection|
|Order numbers|
|Order Number|PC-0224-050-0|

**----- End of picture text -----**<br>